Merge branch 'master' of git://git.denx.de/u-boot-cfi-flash

This commit is contained in:
Wolfgang Denk 2009-02-07 22:17:44 +01:00
commit 0ab5410a40
3 changed files with 31 additions and 40 deletions

View File

@ -305,17 +305,12 @@ flash_map (flash_info_t * info, flash_sect_t sect, uint offset)
{
unsigned int byte_offset = offset * info->portwidth;
return map_physmem(info->start[sect] + byte_offset,
flash_sector_size(info, sect) - byte_offset,
MAP_NOCACHE);
return (void *)(info->start[sect] + byte_offset);
}
static inline void flash_unmap(flash_info_t *info, flash_sect_t sect,
unsigned int offset, void *addr)
{
unsigned int byte_offset = offset * info->portwidth;
unmap_physmem(addr, flash_sector_size(info, sect) - byte_offset);
}
/*-----------------------------------------------------------------------
@ -802,13 +797,11 @@ static flash_sect_t find_sector (flash_info_t * info, ulong addr)
static int flash_write_cfiword (flash_info_t * info, ulong dest,
cfiword_t cword)
{
void *dstaddr;
void *dstaddr = (void *)dest;
int flag;
flash_sect_t sect = 0;
char sect_found = 0;
dstaddr = map_physmem(dest, info->portwidth, MAP_NOCACHE);
/* Check if Flash is (sufficiently) erased */
switch (info->portwidth) {
case FLASH_CFI_8BIT:
@ -827,10 +820,8 @@ static int flash_write_cfiword (flash_info_t * info, ulong dest,
flag = 0;
break;
}
if (!flag) {
unmap_physmem(dstaddr, info->portwidth);
if (!flag)
return ERR_NOT_ERASED;
}
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts ();
@ -873,8 +864,6 @@ static int flash_write_cfiword (flash_info_t * info, ulong dest,
if (flag)
enable_interrupts ();
unmap_physmem(dstaddr, info->portwidth);
if (!sect_found)
sect = find_sector (info, dest);
@ -890,7 +879,7 @@ static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp,
int cnt;
int retcode;
void *src = cp;
void *dst = map_physmem(dest, len, MAP_NOCACHE);
void *dst = (void *)dest;
void *dst2 = dst;
int flag = 0;
uint offset = 0;
@ -1052,7 +1041,6 @@ static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp,
}
out_unmap:
unmap_physmem(dst, len);
return retcode;
}
#endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
@ -1301,7 +1289,7 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
/* handle unaligned start */
if ((aln = addr - wp) != 0) {
cword.l = 0;
p = map_physmem(wp, info->portwidth, MAP_NOCACHE);
p = (uchar *)wp;
for (i = 0; i < aln; ++i)
flash_add_byte (info, &cword, flash_read8(p + i));
@ -1313,7 +1301,6 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
flash_add_byte (info, &cword, flash_read8(p + i));
rc = flash_write_cfiword (info, wp, cword);
unmap_physmem(p, info->portwidth);
if (rc != 0)
return rc;
@ -1372,14 +1359,13 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
* handle unaligned tail bytes
*/
cword.l = 0;
p = map_physmem(wp, info->portwidth, MAP_NOCACHE);
p = (uchar *)wp;
for (i = 0; (i < info->portwidth) && (cnt > 0); ++i) {
flash_add_byte (info, &cword, *src++);
--cnt;
}
for (; i < info->portwidth; ++i)
flash_add_byte (info, &cword, flash_read8(p + i));
unmap_physmem(p, info->portwidth);
return flash_write_cfiword (info, wp, cword);
}
@ -1618,7 +1604,7 @@ static void flash_read_jedec_ids (flash_info_t * info)
* board_flash_get_legacy needs to fill in at least:
* info->portwidth, info->chipwidth and info->interface for Jedec probing.
*/
static int flash_detect_legacy(ulong base, int banknum)
static int flash_detect_legacy(phys_addr_t base, int banknum)
{
flash_info_t *info = &flash_info[banknum];
@ -1634,7 +1620,10 @@ static int flash_detect_legacy(ulong base, int banknum)
for (i = 0; i < sizeof(modes) / sizeof(modes[0]); i++) {
info->vendor = modes[i];
info->start[0] = base;
info->start[0] =
(ulong)map_physmem(base,
info->portwidth,
MAP_NOCACHE);
if (info->portwidth == FLASH_CFI_8BIT
&& info->interface == FLASH_CFI_X8X16) {
info->addr_unlock1 = 0x2AAA;
@ -1648,8 +1637,11 @@ static int flash_detect_legacy(ulong base, int banknum)
info->manufacturer_id,
info->device_id,
info->device_id2);
if (jedec_flash_match(info, base))
if (jedec_flash_match(info, info->start[0]))
break;
else
unmap_physmem((void *)info->start[0],
MAP_NOCACHE);
}
}
@ -1671,7 +1663,7 @@ static int flash_detect_legacy(ulong base, int banknum)
return 0; /* use CFI */
}
#else
static inline int flash_detect_legacy(ulong base, int banknum)
static inline int flash_detect_legacy(phys_addr_t base, int banknum)
{
return 0; /* use CFI */
}
@ -1826,12 +1818,12 @@ static void flash_fixup_stm(flash_info_t *info, struct cfi_qry *qry)
* The following code cannot be run from FLASH!
*
*/
ulong flash_get_size (ulong base, int banknum)
ulong flash_get_size (phys_addr_t base, int banknum)
{
flash_info_t *info = &flash_info[banknum];
int i, j;
flash_sect_t sect_cnt;
unsigned long sector;
phys_addr_t sector;
unsigned long tmp;
int size_ratio;
uchar num_erase_regions;
@ -1847,7 +1839,7 @@ ulong flash_get_size (ulong base, int banknum)
info->legacy_unlock = 0;
#endif
info->start[0] = base;
info->start[0] = (ulong)map_physmem(base, info->portwidth, MAP_NOCACHE);
if (flash_detect_cfi (info, &qry)) {
info->vendor = le16_to_cpu(qry.p_id);
@ -1939,7 +1931,10 @@ ulong flash_get_size (ulong base, int banknum)
printf("ERROR: too many flash sectors\n");
break;
}
info->start[sect_cnt] = sector;
info->start[sect_cnt] =
(ulong)map_physmem(sector,
info->portwidth,
MAP_NOCACHE);
sector += (erase_region_size * size_ratio);
/*
@ -2016,7 +2011,7 @@ unsigned long flash_init (void)
char *s = getenv("unlock");
#endif
#define BANK_BASE(i) (((unsigned long [CFI_MAX_FLASH_BANKS])CONFIG_SYS_FLASH_BANKS_LIST)[i])
#define BANK_BASE(i) (((phys_addr_t [CFI_MAX_FLASH_BANKS])CONFIG_SYS_FLASH_BANKS_LIST)[i])
/* Init: no FLASHes known */
for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {

View File

@ -37,10 +37,6 @@
#define P_ID_AMD_STD CFI_CMDSET_AMD_LEGACY
/* Manufacturers */
#define MANUFACTURER_AMD 0x0001
#define MANUFACTURER_SST 0x00BF
/* AMD */
#define AM29DL800BB 0x22CB
#define AM29DL800BT 0x224A
@ -172,7 +168,7 @@ struct amd_flash_info {
static const struct amd_flash_info jedec_table[] = {
#ifdef CONFIG_SYS_FLASH_LEGACY_256Kx8
{
.mfr_id = MANUFACTURER_SST,
.mfr_id = (u16)SST_MANUFACT,
.dev_id = SST39LF020,
.name = "SST 39LF020",
.uaddr = {
@ -188,7 +184,7 @@ static const struct amd_flash_info jedec_table[] = {
#endif
#ifdef CONFIG_SYS_FLASH_LEGACY_512Kx8
{
.mfr_id = MANUFACTURER_AMD,
.mfr_id = (u16)AMD_MANUFACT,
.dev_id = AM29LV040B,
.name = "AMD AM29LV040B",
.uaddr = {
@ -202,7 +198,7 @@ static const struct amd_flash_info jedec_table[] = {
}
},
{
.mfr_id = MANUFACTURER_SST,
.mfr_id = (u16)SST_MANUFACT,
.dev_id = SST39LF040,
.name = "SST 39LF040",
.uaddr = {
@ -216,7 +212,7 @@ static const struct amd_flash_info jedec_table[] = {
}
},
{
.mfr_id = STM_MANUFACT,
.mfr_id = (u16)STM_MANUFACT,
.dev_id = STM_ID_M29W040B,
.name = "ST Micro M29W040B",
.uaddr = {
@ -232,7 +228,7 @@ static const struct amd_flash_info jedec_table[] = {
#endif
#ifdef CONFIG_SYS_FLASH_LEGACY_512Kx16
{
.mfr_id = MANUFACTURER_AMD,
.mfr_id = (u16)AMD_MANUFACT,
.dev_id = AM29LV400BB,
.name = "AMD AM29LV400BB",
.uaddr = {
@ -249,7 +245,7 @@ static const struct amd_flash_info jedec_table[] = {
}
},
{
.mfr_id = MANUFACTURER_AMD,
.mfr_id = (u16)AMD_MANUFACT,
.dev_id = AM29LV800BB,
.name = "AMD AM29LV800BB",
.uaddr = {

View File

@ -33,7 +33,7 @@ typedef struct {
ulong size; /* total bank size in bytes */
ushort sector_count; /* number of erase units */
ulong flash_id; /* combined device & manufacturer code */
ulong start[CONFIG_SYS_MAX_FLASH_SECT]; /* physical sector start addresses */
ulong start[CONFIG_SYS_MAX_FLASH_SECT]; /* virtual sector start address */
uchar protect[CONFIG_SYS_MAX_FLASH_SECT]; /* sector protection status */
#ifdef CONFIG_SYS_FLASH_CFI
uchar portwidth; /* the width of the port */