AmigaOneG3SE/enet: get mac address from environment

Always use the MAC address that is stored in the environment first before
falling back to the ROM.  This also cuts out any comparison steps: if the
mac in the env is sane, the ROM is never consulted.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Thomas Frieden <ThomasF@hyperion-entertainment.com>
CC: Ben Warren <biggerbadderben@gmail.com>
This commit is contained in:
Mike Frysinger 2009-02-11 18:36:45 -05:00 committed by Wolfgang Denk
parent 56b555a644
commit 06a0c4381a
1 changed files with 8 additions and 34 deletions

View File

@ -600,7 +600,7 @@ static int eth_3com_init (struct eth_device *dev, bd_t * bis)
ias_cmd = (struct descriptor *) &tx_ring[tx_cur];
ias_cmd->status = cpu_to_le32 (1 << 31); /* set DnIndicate bit. */
ias_cmd->next = 0;
ias_cmd->addr = cpu_to_le32 ((u32) & bis->bi_enetaddr[0]);
ias_cmd->addr = cpu_to_le32 ((u32) dev->enetaddr);
ias_cmd->length = cpu_to_le32 (6 | LAST_FRAG);
/* Tell the adapter where the TX ring is located */
@ -787,6 +787,10 @@ static void read_hw_addr (struct eth_device *dev, bd_t * bis)
unsigned int checksum = 0;
int i, j, timer;
/* First, try the env ... if that works, we're all done! */
if (eth_getenv_enetaddr("ethaddr", hw_addr))
goto Done;
/* Read the station address from the EEPROM. */
EL3WINDOW (dev, 0);
@ -827,40 +831,10 @@ static void read_hw_addr (struct eth_device *dev, bd_t * bis)
hw_addr[j + 1] = (u8) ((ETH_INW (dev, j) >> 8) & 0xff);
}
for (i = 0; i < ETH_ALEN; i++) {
if (hw_addr[i] != bis->bi_enetaddr[i]) {
/* printf("Warning: HW address don't match:\n"); */
/* printf("Address in 3Com Window 2 is " */
/* "%02X:%02X:%02X:%02X:%02X:%02X\n", */
/* hw_addr[0], hw_addr[1], hw_addr[2], */
/* hw_addr[3], hw_addr[4], hw_addr[5]); */
/* printf("Address used by U-Boot is " */
/* "%02X:%02X:%02X:%02X:%02X:%02X\n", */
/* bis->bi_enetaddr[0], bis->bi_enetaddr[1], */
/* bis->bi_enetaddr[2], bis->bi_enetaddr[3], */
/* bis->bi_enetaddr[4], bis->bi_enetaddr[5]); */
/* goto Done; */
char buffer[256];
if (bis->bi_enetaddr[0] == 0
&& bis->bi_enetaddr[1] == 0
&& bis->bi_enetaddr[2] == 0
&& bis->bi_enetaddr[3] == 0
&& bis->bi_enetaddr[4] == 0
&& bis->bi_enetaddr[5] == 0) {
sprintf (buffer,
"%02X:%02X:%02X:%02X:%02X:%02X",
hw_addr[0], hw_addr[1], hw_addr[2],
hw_addr[3], hw_addr[4], hw_addr[5]);
setenv ("ethaddr", buffer);
}
}
}
for (i = 0; i < ETH_ALEN; i++)
dev->enetaddr[i] = hw_addr[i];
/* Save the result in the environment */
eth_setenv_enetaddr("ethaddr", hw_addr);
Done:
memcpy(dev->enetaddr, hw_addr, 6);
return;
}