uboot-mt623x/doc/README.sh

63 lines
1.9 KiB
Bash
Raw Normal View History

U-Boot for Renesas SuperH
Last update 08/10/2007 by Nobuhiro Iwamatsu
================================================================================
0. What's this?
This file contains status information for the port of U-Boot to the
Renesas SuperH series of CPUs.
================================================================================
1. Overview
SuperH has an original boot loader. However, source code is dirty, and
maintenance is not done.
To improve sharing and the maintenance of the code, Nobuhiro Iwamatsu
started the porting to u-boot in 2007.
================================================================================
2. Supported CPUs
2.1. Renesas SH7750/SH7750R
2.2. Renesas SH7722
================================================================================
3. Supported Boards
3.1. Hitachi UL MS7750SE01/MS7750RSE01
Board specific code is in board/ms7750se
To use this board, type "make ms7750se_config".
3.2. Hitachi UL MS7722SE01
Board specific code is in board/ms7722se
To use this board, type "make ms7722se_config".
** README **
In SuperH, S-record and binary of made u-boot work on the memory.
When u-boot is written in the flash, it is necessary to change the
address by using 'objcopy'.
ex) shX-linux-objcopy -Ibinary -Osrec u-boot.bin u-boot.flash.srec
================================================================================
4. Compiler
You can use the following of u-boot to compile.
- SuperH Linux Open site
http://www.superh-linux.org/
- KPIT GNU tools
http://www.kpitgnutools.com/
================================================================================
5. Future
I plan to support the following CPUs and boards.
5.1. CPUs
- SH7710/SH7712 (SH3)
- SH7780(SH4)
- SH7785(SH4)
5.2. Boards
- Many boards ;-)
================================================================================
Copyright (c) 2007
Nobuhiro Iwamatsu <iwamatsu@nigaur.org>