OsmocomBB MS-side GSM Protocol stack (L1, L2, L3) including firmware https://osmocom.org/projects/baseband
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
osmocom-bb/src/target/trx_toolkit/burst_fwd.py

70 lines
2.1 KiB

# -*- coding: utf-8 -*-
# TRX Toolkit
# Burst forwarding between transceivers
#
# (C) 2017-2020 by Vadim Yanitskiy <axilirator@gmail.com>
# Contributions by sysmocom - s.f.m.c. GmbH
#
# All Rights Reserved
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
import logging as log
from trx_list import TRXList
class BurstForwarder(TRXList):
""" Performs burst forwarding between transceivers.
BurstForwarder distributes bursts between the list of given
FakeTRX (Transceiver) instances depending on the following
parameters of each transceiver:
- execution state (running or idle),
- actual RX / TX frequencies,
- list of active timeslots.
Each to be distributed 'TxMsg' message is being transformed
into a 'RxMsg' message, and then forwarded to transceivers
with partially initialized header. All uninitialized header
fields (such as rssi and toa256) shall be set by each
transceiver individually before sending towards the L1.
"""
def forward_msg(self, src_trx, rx_msg):
# Originating Transceiver may use frequency hopping,
# so let's precalculate its Tx frequency in advance
tx_freq = src_trx.get_tx_freq(rx_msg.fn)
if src_trx.rf_muted:
del rx_msg.burst # burst bits are omited
rx_msg.burst = None
# Iterate over all known transceivers
for trx in self.trx_list:
if trx == src_trx:
continue
# Check transceiver state
if not trx.running:
continue
if rx_msg.tn not in trx.ts_list:
continue
# Match Tx/Rx frequencies of the both transceivers
if trx.get_rx_freq(rx_msg.fn) != tx_freq:
continue
# Transform from TxMsg to RxMsg and forward
tx_msg = rx_msg.trans(ver = trx.data_if._hdr_ver)
trx.handle_data_msg(src_trx, rx_msg, tx_msg)