GSMTAP support is already merged to the mainline, while the status
of SMSCB support is unknown. In any case, OsmocomBB is not a good
place for storing the patches for Wireshark, so let's remove them.
Change-Id: I448dc5a3dba3ecc6fc041861239dc23cca72b70b
Both removed headers are not used anywhere, and probably left
from the time when there was no libosmocore as a shared library.
Change-Id: I821e2958e07176c1031c636019dffd1cee62bb10
The main problem here is that the existing implementatin missing the L1
header in this message. A SACCH message doesn't have a 23byte LAPDm
message, but only a 21 byte LAPDm message prefixed by a 2-byte Layer1
header. So on the receiver in the BTS, right now the first two bytes of
the UL SACCH frame are misinterpreted as L1 header.
This it what causes RLL ERROR INDICATION on the Abis side, which is why
our BTS_Tests fail.
Change-Id: Id7776bf3604d0e8a32e04547e01b8bd377903272
Related: OS#3170
In order to be able to introspect not only the root application
context, but also all other contexts, e.g. allocated within
libosmocore or other libraries, let's enable tracking the
use of NULL contexts using the corresponding talloc API.
Change-Id: Id21cd5ee340def443f7a5d0b2b8f37f41188dd87
This is useless, and prevents us from finding potential memory
leaks at exit. Let's print talloc report instead of that.
Change-Id: Ibf04942070d654e97c3ed77d69ab19e44602758c
The osmo_init_logging() doesn't allow to specify a talloc context
for libosmocore logging subsystem, so this is why the new version
was introduced. Let's use it.
Change-Id: I06c4a1f7f839f774bc428e89cfac30132bae904d
Previous hardcoded default of 0.0.0.0 was inappropiate in some
scenarios, as it sets the SRC addr of the packets sent through the
socket based on the routing.
For instance, if iface IF1 has assigned two IP addresses A and B,
A being the first addr of the interface, and osmo-bts-trx is
configured with "osmotrx ip local A" and "osmotrx ip remote B",
the following happens:
CMD POWER OFF src=A:5801 dst=B:5701
RSP POWER OFF src=A:5701 dst=A:5701 <-- A is assigned as src addr.
But osmo-bts-trx is waiting for packets from B:5701, and the packet
is dropped with ICMP Unreachable. If addr binding is forced in
fake_trx to B, then everthing's fine.
Let's extend the UDPLink in order to allow manual, but optional
setting of bind address, and add a corresponding cmdline
argument to all executables.
Change-Id: I7be18fef40967fb7551f4115f22cbbd9cdb0840d
the initial tch_mode is not always 0 (signalling) but can very well
be directly a codec mode, if the initial activation of the channel
is in speech mode as opposed to signalling
Change-Id: I96e4c89da1165e9c5287d863e0e65d811460c606
According to TS 144.006, section 5.2, the first octet containing
fill bits shall be set to the binary value "00101011" == 0x2b.
Change-Id: I8f0304bf84613a2dc07cb78aff0cb8bb4c5adf6c
Previously, TCH frames coming from L1 were reordered to the RTP
format. Moreover, the implementation had a few problems:
- L1CTL is not the best place for such manipulations;
- payloads with other than FR codec were corrupted.
Let's use RTP-ordered payloads on the L1CTL interface,
performing TCH frame reordering at the firmware.
Please note, that actual FR reordering was moved to the firmware
as is, without any codec determination. This could be fixed in
a separate change.
Change-Id: I81ec8ed3c9e72a62b22c1720c299cdc68b733cf1
Previously, the L1CTL_CRYPTO_REQ message contained only a ciphering
algorithm and actual Kc key to be used. The key length was
calculated manually using the MSGB API.
Let's avoid manual calculations here, as it may cause unexpected
behavior if the message structure is changed. Also, let's fill
the UL header with minimal information about a channel, which
is going to be encrypted.
Change-Id: I5fab079907c5276322d3ec2b46cab81f10c7ed09
This toolkit has branched out into several different tools for
TRX interface hacking, and creating a virtual Um-interface
(FakeTRX) is only one of its potential applications.
Change-Id: I56bcbc76b9c273d6b469a2bb68ddc46f3980e835
There is no need to manually put the license header as a variable
in each application in order to print it. Let's use a common one.
Change-Id: I1a6e8716a9069e7ade3ae15f2c04fd45d18e223c
We shall always send traffic frame indications, even if received
frame is incomplete or decoding was failed. This is required
for proper Measurement Reporting.
Change-Id: I99e134699796c7075299459e96b2f2d462636619
We shall always send data frame indications, even if received
frame is incomplete or decoding was failed. This is required
for proper Measurement Reporting.
Change-Id: I7beee7e797f488d04c3b59bee9501ce823717092
Since this change, each lchan handler shall manually indicate
a type of both message indications and confirmations.
Change-Id: I02e0b87d61c127d2f6f5b9532909af78332bf707
- change 'l1ctl_tx_data_ind' symbol to 'l1ctl_tx_dt_ind' in
order to indicate that it's used for both DATA and TRAFFIC;
- introduce a 'traffic' flag, which is used to define either
TRAFFIC or DATA indication type;
- pass L2 payload and its length separately from the
Downlink info header.
Change-Id: I9fe65ee9b2d772576b86b7bc85d53518530d1579
- change 'l1ctl_tx_data_conf' symbol to 'l1ctl_tx_dt_conf' in
order to indicate that it's used for both DATA and TRAFFIC;
- introduce a 'traffic' flag, which is used to define either
TRAFFIC or DATA confirmation type;
Change-Id: Iedd569086a264dc7d8740abea5c6e5ca21e299f6
Both functions are almost identical, and the only difference is
the message type they set. Let's combine them into a single
function and introduce a 'traffic' flag, which can be
used to define a message type.
Change-Id: I288f5d7b6cd242c4793973dcb3d2b1b6925d61a7
Each L1CTL message gets its own length pushed in front before
sending. This isn't specified in the 'l1ctl_proto.h', but
assumed in the code. Let's clarify this.
Change-Id: I118d00613aeaf5ff0bad1188fa5f7450d4ca8122
There are two types of L1CTL messages: received and to be
transmitted. Let's use proper names to indicate this.
Change-Id: I7c17687579282fa389bca35dc7edbc3582e55701
If at the moment of transmission there are no frames in TX buffer,
then either a dummy LAPDm frame (0x01, 0x03, 0x01, 0x2b ...) or a
silence frame (depending on a codec in use) shall be transmitted.
This is required for proper measurements on the BTS side.
Change-Id: Ie590990f2274ea476678f6b2079f90eeadab6501
This new flag is intended to indicate that continuous burst
transmission is assumed on particular logical channel. In other
words, if a logical channel has this flag, but there is nothing
to transmit in a TX buffer, then either a dummy LAPDm frame or
a silence frame shall be sent.
Change-Id: I25fcf9eeb787ffe5378d92532439e67d7d42fa65
The sched_frame_clck_cb() is responsible for UL burst transmission.
Iterating over each timeslot, it chooses a proper lchan handler
according to a current frame number and a multiframe layout in use,
takes a L2 UL frame from a TX buffer, and finally calls the chosen
handler in order to to encode and transmit a taken frame.
A handler should be called only for activated logical channels...
but for some long time, there was a bug, so each lchan was
processed, including inactive ones. It's time to fix this.
Change-Id: I33e3ecc14be3ae64dfd02789c7f0970c945582c9
The llist_for_each_entry_safe() should be used instead of the
llist_for_each_entry(), because it's safe against removal
of llist entry.
Found using Valgrind's memcheck tool.
Change-Id: I65234971ec152df038c5388da537a503060c215b
Since it is not required to specify a bind port to the UDPLink
constructor manually, let's use a random one by default, and
also allow user to set it from command line.
Change-Id: Ib4965ebeec83d9a99b2f026156eb5f5cb20875bf
This allows one to obtain a random available port from the
OS, instead of enforcing to pick a static value manually.
Change-Id: Ie8b60134239c5447d0b4373c6cca2f3a6ee3ec73
Previously, we used to check if all arguments of a command are
numeric. This was done in a wrong way, so parsing a *valid*
command with at least one negative argument could fail.
Let's remove this check, allowing the command handlers to
deal with argument types themselves.
Change-Id: If31295274a09102c414b5a7aec5dd85d88b2e514
There's no need to express ToA value as a float. Let's turn it into
an int16_t with 1/256 symbol period accuracy throughout the code to
avoid both float arithmetic as well as loosing any precision.
Inspired by Idce4178e0b1f7e940ebc22b3e2f340fcd544d4ec.
Change-Id: I99c0f38db08a530d5846c474aba352aa0b68fe86
The command line help states '-i' is for 'TRX IP address', which is
the remote IP address at which the TRX is to be found. Hoewever, it
was used as the local (bind) IP address of the socket used towards
the TRX. This is my attempt at fixing this. A more complete solution
probably allows to specify both local (bind) and remote (connect)
address, just to be clear.
Change-Id: If0252b15e9c7942687c6dc470951d777f7af651c
In theory, the maximum TA value is 63 symbols, i.e. 63*256 in this
context. However, our test cases want to test the BTS behavior is
correct if ever a larger timing offset is reported from TRX to the BTS,
to ensure it is rejected in the BTS. Let's hence increase the values
to rather large min/max limits. We could also remove them completely.
Change-Id: I691d081256e8c6d18ef2836299ed8f7d502da3ee
Now that ctrl_if.py is capable of sending back the response to where
the command originated from, we can just as well send a positive
response back after executing the related commands.
Change-Id: Icba138835149a7264f4db3a6b05f54ca501c4d54
fake_trx is using locally bound and not connected UDP sockets for
control commands.
When we receive a control command, we should not simply send the
response to the default destination, but send it back to the exact
ip+prt from which the command originated. This ensures correct routing
of responses even in case multiple programs are interfacing concurrently
with a control socket.
Change-Id: I24a0bba6eed059b101af95dac7d059f34dd715fc
Vadim Yanitskiy
Harald Welte
Pau Espin