OsmoBTS, BSC and TTCN3 used cbits == 0x18 for dynamic PDCH, while
trxcon wanted to use 0x18 for CBCH on SDCCH/4. Let's fix this and
bring everyone in agreement.
Related: OS#4027
Change-Id: Ia9a415628c659cbc2dd5dc65b875b7f935d6e211
sap_fsm.c: In function ‘sap_negotiate_msg_size’: sap_fsm.c:103:15:
warning: passing argument 1 of ‘__bswap_16’ makes integer from pointer
without a cast [-Wint-conversion]:
size = ntohs((uint16_t *) param->value);
^~~~~~~~~~~~~~~~~~~~~~~~~
Change-Id: Ie58af6162c67ae377809b42daa897ca3f3d72af1
Starting from [1], not only LMA but also VMA areas are now checked
for overlaps (see also [2]). This results into linking errors:
arm-none-eabi-ld: section .text.exceptions VMA
[000000000080001c,0000000000800037] overlaps section
.compal.reservedram VMA [0000000000800000,00000000008000fe]
arm-none-eabi-ld: section .text.exceptions VMA
[000000000080001c,0000000000800037] overlaps section
.compal.loader VMA [0000000000800000,00000000008000ff]
Let's try to work around this.
[1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=a87dd97a2098b7e18ff2574a4e81ae521ef7e6f2
[2] https://sourceware.org/bugzilla/show_bug.cgi?id=18452
Change-Id: I098ddd33aabd7ec27981e2f09d8582f167bb649b
Fixes: OS#1917
According to the man page of recv(), the only difference of this
call from read() is the presence of flags. With a zero flags
argument, recv() is generally equivalent to read().
Change-Id: I6d43bbf8d52c5fbb8ee0592b7d1c1dfd2dd1548e
Since we only set both ARFCN and TDMA frame number of the DL info
header, other fields remain uninitialized. Let's memset() them.
Change-Id: Ib39c333f1724fefa5d8bd8a2315b77a5612f7fa9
This would allow to abstract both L1CTL and TRX interfaces
from each other in the upcoming refactoring.
Change-Id: I74a23c73b03bad822272b9cfe76c2501666912b7
In both gsm48_mm.c and gsm48_rr.c we put / push 'gsm48_rr_hdr'
structure into the message buffers, so then it's retrieved by
the message receivers. The AddressSanitizer complains about
unaligned pointer access and potentially unexpected behaviour.
Change-Id: I8aa2c0074b405afd0e76044ef076b6819fe1083b
In gsm322_l1_signal(), if S_L1CTL_FBSB_ERR is received, we free
stored System Information of the current cell, but cs->si may
still point to it. Let's set it to NULL.
Found with AddressSanitizer:
DL1C ERROR l1ctl.c:96 FBSB RESP: result=255
DCS INFO gsm322.c:2995 Channel sync error, try again
DCS INFO gsm322.c:467 Sync to ARFCN=860(DCS) rxlev=-106
DRR INFO gsm48_rr.c:665 MON: no cell info
DRR INFO gsm48_rr.c:665 MON: no cell info
DRR INFO gsm48_rr.c:665 MON: no cell info
DRR INFO gsm48_rr.c:665 MON: no cell info
DL1C ERROR l1ctl.c:96 FBSB RESP: result=255
DCS INFO gsm322.c:3008 Channel sync error.
DCS DEBUG gsm322.c:3013 free sysinfo ARFCN=860(DCS)
DCS INFO gsm322.c:3020 Unselect cell due to sync error!
DCS INFO gsm322.c:509 Unselecting serving cell.
=================================================================
==6014==ERROR: AddressSanitizer: heap-use-after-free on address
0x61b0000000e6 at pc 0x00000050d6dd
bp 0x7fff7f84aa60 sp 0x7fff7f84aa58
Change-Id: I9cc526c18d69695d810de98703579818408de011
The old TOA256 range was bigger than we can actually store:
struct.error: 'h' format requires -32768 <= number <= 32767
Change-Id: I5d4e1fea9d07f2c49f01e6644d1c0d1dc8cf4e40
According to 3GPP TS 05.03, section 5.3, two coding schemes are
specified for access bursts: one for regular 8-bit bursts,
another - for extended 11-bit packet access bursts.
According to 3GPP TS 05.02, section 5.2.7, there are two
additional training (synchronization) sequences for RACH
bursts: TS1 & TS2. By default, TS0 synch. sequence is used,
unless explicitly stated otherwise (see 3GPP TS 04.60).
According to 3GPP TS 04.60, section 11.2.5a, the EGPRS capability
can be indicated by the MS using an alternative training sequence
(i.e. TS1 or TS2) and the 11-bit RACH coding scheme.
Change-Id: I36fd20cd5502ce33c52f644ee4c22abb83350df8
According to 3GPP TS 04.60, section 11.2.5a, the extended (11-bit)
Access Burst on RACH/PRACH is used by the MS to indicate its EGPRS
capability. One of the alternative synch. sequences (see 3GPP TS
05.02, TS1 and TS2) shall be used.
Change-Id: Iae0267a31b3314c990eb41acb2f570ca3219021c
Use static helper to prepare l1ctl_fbsb_conf - this simplifies
fbsb-related functions and make difference between timer callback and
regular response more obvious.
Change-Id: I43832d6a912a32ea5795ed0110981e0b714a7a61
Use static helpers to add l1ctl_info_dl to msgb - this simplifies
l1ctl_* routines and reduce code duplication.
Change-Id: I0b5b81f1fcd2984136e553a93735ea5456d2b3df
In OS#3582, the autor of TIFFS code, Mychaela Falconia, has noted:
... all of my code contributions are in the public domain and
are NOT copyrighted by me, and I strenuously object to anyone
taking it upon themselves to insert a copyright notice with
my name in it.
Let's update the copyright statements as recommended by the author.
Change-Id: If115991425372a4cdbcfefa115532c9c410e58c4
Instead of counting both RSSI and ToA measurements separately,
let's have a single counter in trx_lchan_state.meas struct.
Change-Id: I45454a3ac92b8cc85dd74092e4ab6eb350f20c9a
All known TI GSM firmwares implement some kind of flash file system, or FFS.
We call it TIFFS (Texas Instruments FFS) because it is TI's invention.
TIFFS is a file system with a hierarchical directory tree structure, and
with Unixy forward-slash-separated, case-sensitive pathnames; the semantics
of "what is a file" and "what is a directory" are exactly the same as in
UNIX; and TIFFS even supports symlinks, although that support is a little
under-developed, and apparently no FFS symlinks were ever used in any
production GSM device. Thus the FFS implemented in TI-based GSM devices
(modems and "dumbphone" handsets) is really no different from, for example,
JFFS2 in embedded Linux systems.
The FFS in a GSM device typically stores two kinds of content:
- Factory data: IMEI, RF calibration values, device make/model/revision
ID strings etc. These files are expected to be programmed on the
factory production line and not changed afterward.
- Dynamic data written into the FFS in normal device operation: contacts,
settings / preferences, call history, received SMS, etc.
It should be noted that both Compal (Mot C1xx) and Foxconn (Pirelli DP-L10)
vendors moved their vital per-unit factory data out of the FFS into their
own ad hoc flash data structures, leaving their FFS only for less
critical data. However, we do enable TIFFS access for them anyway.
The location of TIFFS within the flash memory of a given GSM device is
defined by the firmware design of that device, but is always some integral
number of contiguous flash sectors.
- On Motorola/Compal C139/140 phones, the FFS used by the original
proprietary firmware occupies 5 sectors of 64 KiB each (320 KiB
in total), starting at 0x370000. C11x/123 use smaller FFS
configurations, whereas C155/156 seem to have switched to some
other FFS format, different from our familiar TIFFS.
- On the Pirelli DP-L10, the FFS used by the original proprietary
firmware occupies 18 sectors of 256 KiB each (for 4.5 MiB in total),
starting at the beginning of the 2nd flash chip select (0x02000000
in the ARM7 address space).
- On FCDEV3B (FreeCalypso hardware), the FFS is located in the first
8 sectors (of 256 KiB each) in the 2nd flash chip select bank,
which appears at 0x01800000 in the ARM7 address space.
- On the GTA01/02 GSM modem, FFS occupies 7 sectors of 64 KiB each,
starting at flash offset 0x380000.
For more information, please refer to the FreeCalypso project
documentation, from where this great contribution comes from.
Please note that existing MediaTek targets most likely use different
storage format as they have nothing from TI Calypso. Also, we don't
(yet) know the location of TIFFS on SE J100i and Compal E99 targets.
The TIFFS support is needed for the follow-up change, that
implements reading of the factory RF calibration values.
Tweaked (coding style changes) by Vadim Yanitskiy <axilirator@gmail.com>
Change-Id: If6e212baeb10953129fb0d5253d263567f5e12d6
Related: OS#3582
FCDEV3B (stands for "FreeCalypso development board, triband") is a
GSM mobile station development board by FreeCalypso project. The
board features the same legendary TI Calypso GSM MS chipset that
was used in commercial GSM/GPRS modems such as Openmoko's, and
functions as a standalone (or "bare") GSM modem.
For more information, please see the project's web side:
https://www.freecalypso.org/fcdev3b.html.
Change-Id: I09bd35a18d3ea094000050169a62fd82ba6eccfe
Related: OS#3581
The ability to read the second half of flash on E99 is needed
for the follow-up change, that implements reading of the
factory RF calibration values.
Change-Id: Ia677ebdc1ada9fd41daf211fd9da06cd118365fa
Related: OS#3582
Each given Mot C1xx phone is made either for 900+1800 MHz, in which
case only the DCS Rx port is connected, or for 850+1900 MHz, in which
case only the PCS Rx port is connected. Let's tell the TRF6151 driver
that both DCS and PCS ports are connected, so that the same binary
build can be used on both EU-band and US-band C1xx phones.
If one needs to tune the TRF6151 receiver out of spec, or at least
outside of the DCS/PCS Rx SAW filter's legitimate passband (or if
the SAW filter was changed or removed), then the rffe_get_rx_ports()
function might be changed to indicate which Rx port is physically
connected: PORT_DCS1800 only or PORT_PCS1900 only.
Change-Id: I620084c33ad165faffbbfc45923faedad77aafb2
Most Calypso peripheral interface signals are unconnected on
Openmoko GTA0x. Let's configure them to be GPIOs in IO_CONF_REG,
then configure them to be outputs in IO_CNTL_REG, then set
the outputs to 0 in ARMIO_LATCH_OUT.
Change-Id: I306ffacb623d2b06a188f84026ccadab408d1676
This change fixes the following compiler warning:
sim.c: In function ‘gsm_sim_reply’:
sim.c:149:11: warning: variable ‘payload’ set but not used
[-Wunused-but-set-variable]
uint8_t *payload;
Change-Id: I3767b23bb1b28d3f4bb515d399bce160ba2eee09
As we do iterate over all entities in the BA list, it makes more
sense to print each one separately instead of printing the last
one. Moreover, as soon as the iteration is finished, *ba points
to some zero-initialized part of memory:
gsm322.c:5170 Write stored BA list (mcc=000 mnc=000 Marshall Islands, 000)
After this patch:
gsm322.c:5162 Write stored BA list (mcc=250 mnc=99 Russian Federation, Beeline)
gsm322.c:5162 Write stored BA list (mcc=250 mnc=01 Russian Federation, MegaFon)
gsm322.c:5162 Write stored BA list (mcc=250 mnc=02 Russian Federation, MTS)
gsm322.c:5162 Write stored BA list (mcc=544 mnc=31 Serbia, Telenor)
Change-Id: I5160492e6125401c6a1765f54d129b1f1cd503fc
In If1e851ac605c8d2fde3da565b0bd674ea6350c2e, msgb_wrap_with_TL()
was renamed to msgb_push_tl(). Let's use the new symbol name.
Change-Id: Ief37424e0ca3cd696054518a0ffb07b7ef17a462
Both l1ctl_link_init() and trx_if_open() do accept 'tall_ctx' now,
so there is no need to expose the root context anymore. For
logging initialization, we can just pass a pointer.
Change-Id: I7a2231eb880a995d3296b94481a7799e6ff07489
The main changes are:
- return pointer to the allocated l1ctl_link or NULL,
- accept the talloc context as 'tall_ctx' argument.
Change-Id: I7fe1bc306494ac692c182dcfd2a2d9412929194b
The main changes are:
- return pointer to the allocated trx_instance or NULL,
- extend debug message with TRX address and base port,
- accept the talloc context as 'tall_ctx' argument,
- rename goto label 'error' to 'udp_error',
- rename argument 'port' to 'base_port'.
Change-Id: I39b24afee2f09d6a6c500cfc26ac45f206589c5c
Since Ibff31fb3a958a714c828d0dea7e87d47f778fd80, fake_trx.py does
support multiple transceivers. Let's update its description.
Change-Id: I6e4351693da3a1f7e3eadd8e11971c34044dde20