Both '--bind-addr' and '--burst-type' had the same short '-b'.
Let's use the upper case version for '--burst-type'.
Change-Id: Ib8a46e25cbc6266c3e147582f9e8045362270151
There are multiple advantages of using Python's logging module:
- advanced message formatting (file name, line number, etc.),
- multiple logging targets (e.g. stderr, file, socket),
- logging levels (e.g. DEBUG, INFO, ERROR),
- the pythonic way ;)
so, let's replace multiple print() calls by logging calls,
add use the following logging message format by default:
[%(levelname)s] %(filename)s:%(lineno)d %(message)s
Examples:
[INFO] ctrl_if_bts.py:57 Starting transceiver...
[DEBUG] clck_gen.py:87 IND CLOCK 26826
[DEBUG] ctrl_if_bts.py:71 Recv POWEROFF cmd
[INFO] ctrl_if_bts.py:73 Stopping transceiver...
[INFO] fake_trx.py:127 Shutting down...
Please note that there is no way to filter messages by logging
level yet. This is to be introduced soon, together with argparse.
Change-Id: I7fcafabafe8323b58990997a47afdd48b6d1f357
The randomization of both UL/DL RSSI and ToA values is optional,
and can be configured from the control interface (see both
FAKE_RSSI and FAKE_TOA commands).
The command line options for enabling / disabling the randomization
were redundant, so let's get rid of them and check if the
corresponding treshold value is set.
Change-Id: I6adc13b8989ade2fab895673525c0ca17bf9b3f2
For some reason, the time-slot pass-filtering was only done for
DL bursts, but not for UL bursts. BurstForwarder shall not pass
UL bursts for unconfigured time-slots too.
Let's also print a warning if an UL burst is sent on a not
configured time-slot, i.e. before sending SETSLOT command.
Change-Id: Idb7f5b212e5814aeff8ca8bc875ad066674267cd
Previously it was only possible to configure a single time-slot
that would be pass-filtered by a BurstForwarder instance. In some
applications it would be useful to configure multiple time-slots,
so let's refactor the time-slot pass-filtering algorithm.
Change-Id: Ie1490adaf7a7c62c966aeb60c1898eaf3b5a1e84
Instead of having all configuration variables of BurstForwarder
initialized in the class heading, let's introduce two functions
for initialization (resetting to defaults) of both UL/DL params.
This would allow to reset a BurstForwarder instance from the
control interface in follow-up patches.
Let's also introduce some basic documentation for the class
fields, which were defined in the heading previously.
Change-Id: I6b1bf41cf22f01a7e7ecc91c625fb0d2bf4bfeac
The idea of SETFH command is to instruct transceiver to enable
frequency hopping mode using the following parameters:
CMD SETFH <HSN> <MAIO> <CH1> <CH2> [... <CHN>]
Note: since the length of a CTRL command is limited to 128
symbols (BTW: why?), the amount of channels is also limited.
Change-Id: Id3d44e6a2796f1ce8523a49dedd5d484052a5c7f
This change revives the main idea of:
Change-Id: I32517567847fd5c54b1742f18bf409ff81e316fa
to stop ignoring the VTY bind address from the config file.
Furthermore, it deprecates (and disables) both 'u' and 'v'
command line options, because they are redundant.
Change-Id: I99e0ec1717edd29b3be231be86616cc7effe5d95
The process should be aborted if a non-existing command line
option or an incorrect parameter value is passed.
Change-Id: Ib656ad12f12429ed15dc2a1554901ffa51148ff6
The VTY requisites are always being printed by libosmovty,
there is no need to duplicate this information.
Change-Id: I688f66175ea67d4c6a46819bee7d300ad9ce7cc7
This reverts commit c8de8cb1e1
(Change-Id I32517567847fd5c54b1742f18bf409ff81e316fa by Max),
because several problems were introduced, in particular:
a) Help message of mobile application is broken:
"The VTY IP to telnet to. (default (null))",
"The VTY port number to telnet to. (default 127.0.0.1)".
b) Default VTY bind addres != parsed from the config file.
c) The (vty_ip == NULL) is resolved only when an external
MNCC handler is used, otherwise NULL is passed to
l23_app_init().
Change-Id: Ic63a4eb828ff32d3744886b4f5f6f5019c798620
Previously the vty bind config parameter was always ignored. Fix this by using proper
default value from the config unless it's explicitly set via command-line parameter.
Change-Id: I32517567847fd5c54b1742f18bf409ff81e316fa
Log via LOGP() like the rest of the file instead of fprintf() for
consistency. While at it, also print error cause.
Change-Id: Id205bcd9bdb7c3e4b96493d50be8381a6fa80ac6
Fixes following ASan warning:
git/osmocom-bb/src/host/layer23/src/misc/../common/main.c:146:2: runtime error: null pointer passed as argument 2, which is declared to never be null
The warning however is harmless since in that case, app_len = 0 and thus
size to copy is 0.
Change-Id: I009a5b53f1e5be72ce347d64d3a7cb1d95d37ea3
Unlike the DATA messages, traffic frames may have different length.
Instead of having fixed payload (i.e. TCH frame) length, let's
introduce a flexible array member. This would allow one to
calculate the frame length using the MSGB API.
Change-Id: I119fa36c84e95c3003d57c19e25f8146ed45c3c6
L1CTL implementation (i.e. l1ctl.c) is not a good place for the
SIM specific stuff. Let's move it to the proper place (i.e. sim.c).
As a bonus, this change fixes a possible problem of loosing the
cached APDUs if two or more L2&3 applications are using a single
LAPDm connection. The APDU buffer is dedicated per MS now.
Change-Id: I564c610e45aa3b630ca5d1ec6bc1cace0dc9c566
Previously the wildcard address (i.e. '0.0.0.0') was hard-coded
as the bind address of TRX interface. Let's make it configurable
by introducing a command line option.
Note that the '--trx-ip' option was deprecated by '--trx-remote',
because it isn't clean whether it is remore or local address. It
still can be used, but was removed from help message.
Change-Id: Ic2f43632cc57bb6f722eba05219e438f97fecb95
Since FakeTRX is a proxy, it basically emulates transceiver for
both osmo-bts-trx and trxcon, hence there are two separate and
independent control interfaces (usually, ports 6701 and 5701).
All simulation commands (see 'FAKE_*') are usually implemented
on both interfaces separately:
- ctrl_if_bb.py - simulation commands affecting Uplink,
- ctrl_if_bts.py - simulation commands affecting Downlink.
This change introduces the 'FAKE_RSSI' command for both CTRL
interfaces in two variations:
- absolute: CMD FAKE_RSSI <BASE> <THRESH>
- relative: CMD FAKE_RSSI <+-BASE_DELTA>
where 'THRESH' affects optional value randomization.
Change-Id: Ic01c31fb0304345dd7337c3ee1c7ee3c2d3e8460
Almost all handlers for received L1CTL messages are also affected
by the bug fixed in I7fe2e00bb45ba07c9bb7438445eededfa09c96f3. In
short, they do verify the length of 'msg->l2h' or 'msg->l3h', but
not the 'msg->l1h'. Let's fix this, and also add missing checks.
Change-Id: I866bb5d97a1cc1b6cb887877bb444b9e3dca977a
As we assign the payload following L1CTL header to 'msg->l1h',
it makes sense to avoid possible naming confusion.
Change-Id: I5d21ca8664b3445f472d3ffde90d0e11805dcb16
The actual L1CTL header is pointed by 'msg->l1h', not 'l2h'!
Since msg->l2h is NULL (because nobody set it), the result of
msgb_l2len() would always be bigger than size of L1CTL header,
as it is calculated in the following way:
return msgb->tail - (uint8_t *)msgb_l2(msgb);
So, in case if 'msg->l2h' is NULL, it turns into:
return msgb->tail - 0;
Change-Id: I7fe2e00bb45ba07c9bb7438445eededfa09c96f3
In l1ctl_recv() we actually expect to 'see' the L1CTL header
instead of the DL info header. Let's fix this.
Change-Id: Ic7d017bef04f3c186565d5dade36959df1019bd8
There is no need to keep the L1CTL header in messages being sent
towards the upper layers, but the L1 info header can be used by
L2&3 to obtain some information, e.g. TDMA frame number.
Change-Id: Id64249f1b7a1c2be578263ba62aa195c452ab7e8
This change extends sched_trx_chan_nr2pchan_config() with Osmocom
specific cbits related to CBCH, so now one can to decode
CBCH channels in dedicated mode (see L1CTL_DM_EST_REQ).
Change-Id: I9347c45638223cac34f4b48eb736e51a5055a36f
According to GSM TS 05.02, there are two ways to enable CBCH:
a) replace sub-slot number 2 of CCCH+SDCCH/4 (comb. V),
b) replace sub-slot number 2 of SDCCH/8 (comb. VII).
Unlike SDCCH/8 (case b), CCCH+SDCCH/4 can be allocated on TS0
only, and shall not use frequency hopping. This means that
implementing CBCH support on SDCCH/8 would require much more
efforts than on combined CCCH+SDCCH/4, as in last case CBCH
messages can be received without the need to switch from
idle to dedicated mode.
This change introduces a new ccch_mode item, which should be
used by the higher layers to indicate presence of CBCH channel
on C0/TS0, so the PHY would enable decoding of CBCH messages
on CCCH+SDCCH/4 (case a) in idle mode.
Regarding to CBCH on SDCCH/8 (case b), it makes sense to
extend the 'l1ctl_dm_est_req', so it would be handled in
dedicated mode on request from the higher layers.
Change-Id: Ia94ebf22a2ec439dfe1f31d703b832ae57b48ef2
According to GSM TS 05.02, section 3.3.5, Cell Broadcast Channel
(CBCH) is a downlink only channel, which is used to carry the
short message service cell broadcast (SMSCB). CBCH is optional,
and uses the same physical channel as SDCCH. More precisely,
CBCH replaces sub-slot number 2 of SDCCH channels when enabled.
This change introduces the CBCH enabled multi-frame layouts,
and two separate logical channel types:
- GSM_PCHAN_CCCH_SDCCH4_CBCH (lchan TRXC_SDCCH4_CBCH),
- GSM_PCHAN_SDCCH8_SACCH8C_CBCH (lchan TRXC_SDCCH8_CBCH).
Both logical channels are separately identified using
the following Osmocom specific cbits:
- TRXC_SDCCH4_CBCH - 0x18 (0b11000),
- TRXC_SDCCH8_CBCH - 0x19 (0b11001).
The reason of this separation is that we somehow need to
distinguish between CBCH on C0/TS0, and CBCH on CX/TS0.
Unlike TRXC_SDCCH8_CBCH, TRXC_SDCCH4_CBCH is enabled
automatically (TRX_CH_FLAG_AUTO), so CBCH messages
can be decoded on C0 while being in idle mode.
Change-Id: Iad9905fc3a8a012ff1ada26ff95af384816f9873
According to GSM TS 05.02, section 3.3.5, Cell Broadcast Channel
(CBCH) is a downlink only channel, which is used to carry the
short message service cell broadcast (SMSCB). CBCH is optional,
and uses the same physical channel as SDCCH. More precisely,
CBCH replaces sub-slot number 2 of SDCCH channels when enabled.
This change introduces the following CBCH related tasks:
- MF_TASK_SDCCH4_CBCH (CBCH on C0/TS0 SDCCH/4),
- MF_TASK_SDCCH8_CBCH (CBCH on SDCCH/8),
which are identified using the following Osmocom specific cbits:
- MF_TASK_SDCCH4_CBCH - 0x18 (0b11000),
- MF_TASK_SDCCH8_CBCH - 0x19 (0b11001).
The only way to enable these tasks at the moment is to send
L1CTL_DM_EST_REQ message with required cbits and tn.
Change-Id: I1d7f02cba1cd8f6527360589d2d2747b6426f78b
The mframe_task2chan_nr() is used to get the channel number
(encoded according to 08.58 Chapter 9.3.1) corresponding to
a given multi-frame task type.
It makes sense to at least print some debug message in cases
when there is no matching channel number for a given task type.
Change-Id: I34587b6c67015513de35d85a7a3291f452ee7f3b
The 'ccch_mode' enum from 'l1ctl_proto.h' to be extended in the
near future in order to reflect persistence of CBCH. Thus it
should be handled in a switch statement.
Change-Id: I75e3b8deac1da296efb178e65ff6992b5c407b80
According to GSM TS 08.58, chapter 9.3.1, channel number 0x08
describes sub-slot number 0 of SDCCH/8+ACCH. This is definitely
wrong. In OsmoBTS we use an Osmocom specific extension for packet
switched channels - 0xc0, so let's use it here too.
Change-Id: I11925408d6e63baf1eac880839ecd717843fba6a
In some conditions it's required to maintain continuous burst
transmission (e.g. on C0). If there is nothing to transmit at
a given moment, either a LAPDm func=UI fill frame,
or a "dummy" Paging Request is used.
In case of 'ccch_scan' application, they are useless.
Let's detect and omit them.
Change-Id: I6ccecb1a78bdac3e467bdc14b7a01afbe17aa53c
Vadim Yanitskiy
Pau Espin
Harald Welte