Enforcing pointer to a 'trx_instance' structure is not flexible,
because it is used as parent talloc context only.
Change-Id: I5ab2ef5cea76f955bf72ef54541b3b75cdc2d23f
Having access to a logical channel state is required by the
follow-up change, which will introduce a separate function
for dequeuing SACCH primitives.
Change-Id: Ibde0acf8e6be224b1007be707a636eaad68c8d36
Unlike xCCH, TCH/H channels are using block diagonal interleaving,
so every single burst carries 57 bits of one traffic frame, and 57
bits of another one. Moreover, unlike TCH/F where both traffic
and FACCH/F frames are interleaved over 8 bursts, a FACCH/H is
interleaved over 6 bursts, while a traffic frame is interleaved
over 4 bursts.
This is why a TCH/H burst transmission can't be initiated on
an arbitrary TDMA frame number. It shall be aligned as of
stated in GSM 05.02, clause 7, table 1.
This change introduces two basic functions:
- sched_tchh_block_map_fn - checks if a TCH/H block transmission
can be initiated / finished on a given frame number
and a given channel type;
- sched_tchh_block_dl_first_fn - calculates TDMA frame number of
the first burst using given frame number of the last burst;
and some auxiliary wrappers to simplify the usage of
sched_tchh_block_map_fn().
Change-Id: Iaf4cb33f1b79df23f8a90c8b14ebe0cd9907fbb9
The 'normal' math operations, such as addition and substraction,
are not applicable for TDMA frame numbers because they may result
in out-of-range values.
Having TDMA frame math helpers in a single place would allow
one to avoid possible out-of-range result mistakes.
Change-Id: Ibb66ba846cc3d6c2eaa88414569e5f3751128047
GSM48_CMODE_SIGN means 'signaling only', so we shall not send
bad frame indications in this state. Instead, it makes sense
to send dummy L2 frames like we do for xCCH channels.
Change-Id: Ie39d53522cafab265099076b3194fa96aff217ba
Despite the correct range of Timing Advance value is [0..63],
there is a special feature in OsmocomBB which allows one to
simulate the distance between both MS and a BTS by playing
with the signal delay.
So, let's drop the range limitation.
Change-Id: I8fd2a2ab7784b38bde5ebcfd0359b7e2cb53f5a7
Despite the correct range of Timing Advance value is [0..63],
there is a special feature in OsmocomBB which allows one to
simulate the distance between both MS and a BTS by playing
with the signal delay.
This is why a signed 'int8_t' type is used in L1CTL protocol.
No need to limit the range, just forward it to TRX.
Change-Id: I06774b315b8451bf14083da6b2849d6e8594abc8
Despite the correct range of Timing Advance value is [0..63],
there is a special feature in OsmocomBB which allows one to
simulate the distance between both MS and a BTS by playing
with the signal delay.
It was discovered that l1ctl_tx_param_req() is using an unsigned
'uint8_t' type for Timing Advance value, while other code and
L1CTL protocol is using signed 'int8_t'. This may result in
distortion of negative values, so let's fix this!
Change-Id: I6ee42b5fa2ca9ebe187f0b933465c49f840a55c2
I am not sure we need the both control commands, as every burst
on DATA interface has a header that includes TX power.
Change-Id: Id14603e71df6dedb5a843bb3e20a320192dbca3d
Let's differentiate between 'expected' unimplemented messages
like L1CTL_NEIGH_PM_REQ and truly unknonw message types.
Change-Id: Id76993056fb514e6fb0242d505205316c61bb965
A BSC may allocate a dedicated channel on any ARFCN, not necessary
on the same one where a mobile station has requested this channel.
For some reason, the ARFCN info of L1CTL_DM_EST_REQ message was
not handled by trxcon. Let's fix this.
Related: OS#3526
Change-Id: I16ed5c64236c159bfa39002b05094c1f6c171f6b
We don't need to hand-code unix domain socket initialization but
can simply use our library function for it. As an added benefit,
the library code already contains corner case handling for non-NUL
terminated unix domain socket path.
Change-Id: I57c724c78dbbbce0546ebe914e370f32c8c89703
We don't need to hand-code unix domain socket initialization but
can simply use our library function for it. As an added benefit,
the library code already contains corner case handling for non-NUL
terminated unix domain socket path.
Change-Id: Iedcec4591cf0fcbd6f956ed022169eae10a9b16e
We don't need to hand-code unix domain socket initialization but
can simply use our library function for it. As an added benefit,
the library code already contains corner case handling for non-NUL
terminated unix domain socket path.
Change-Id: I3ab69a971be555c9f9b5b7a7e5da53008a119504
In the most cases an ARFCN value is stored together with some
flags (e.g. DL/UL flag, DCS flag), so it should be taken into
account e.g. when printing. Let's use the proper naming.
Change-Id: I0b7634c80986dbff9d0da421c6a044cd36c9fd01
There is no need to check the range of timeslot number, which is
decoded from GSM 08.58 channel number (9.3.1) by applying 0x07
mask, because any result of this operation is always within
the correct range.
Change-Id: Ib84417099d303bd3ae3557f48a5c40b812c6cdfc
There is no helptext for the commandline options, which makes it
difficult for new users to use the program.
- Add commandline help
Change-Id: I8d04644342acd64432742f96e32dc9f2e0e91c20
To have bi-directional communication we can pass credentials to the
registry server and now we can register a callback when the registry
is sending data to us.
The callback needs to return if the fd should continue to be selected
as I found no way to push the userdata as parameter on the stack. Lua
code will look like:
local host, port = "www.osmocom.org", 80
local tcp = socket.tcp()
tcp:connect(host, port);
tcp:send("GET / HTTP/1.0\r\n\r\n");
local cb = function()
local s, status, partial = tcp:receive()
print(s)
if status == 'closed' then
tcp:close()
return 0
end
return 1
end
local foo = osmo.register_fd(tcp:getfd(), cb)
Change-Id: I8254bdda1df2f8fe0a5eac894b931e7de5b426df
Address sanitizer triggered when trying to chainload firmware:
==18466==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x631000027850 at pc 0x7f5b94cfb733 bp 0x7ffe33e1ae30 sp 0x7ffe33e1a5d8
READ of size 1014 at 0x631000027850 thread T0
#0 0x7f5b94cfb732 (/usr/lib/x86_64-linux-gnu/libasan.so.4+0x79732)
#1 0x563db4293e6e in memcpy /usr/include/x86_64-linux-gnu/bits/string_fortified.h:34
#2 0x563db4293e6e in romload_prepare_block osmocom-bb/src/host/osmocon/osmocon.c:473
#3 0x563db429541f in handle_read_romload osmocom-bb/src/host/osmocon/osmocon.c:959
#4 0x563db429541f in serial_read osmocom-bb/src/host/osmocon/osmocon.c:1168
#5 0x7f5b94722c83 in osmo_fd_disp_fds libosmocore/src/select.c:217
#6 0x7f5b94722f84 in osmo_select_main libosmocore/src/select.c:257
#7 0x563db4293b1c in main osmocom-bb/src/host/osmocon/osmocon.c:1525
#8 0x7f5b942b9b96 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21b96)
#9 0x563db4293c79 in _start (prefix/sbin/osmocon+0x1c79)
0x631000027850 is located 0 bytes to the right of 77904-byte region [0x631000014800,0x631000027850)
allocated by thread T0 here:
#0 0x7f5b94d60b50 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xdeb50)
#1 0x563db4294d65 in read_file osmocom-bb/src/host/osmocon/osmocon.c:314
Change-Id: Ie2955e11dd1af75574536774ef7ddf88ddf1fe8b
virtphy uses UDP multicast to communicate with its osmo-bts-virtual
counterpart. At the momemnt SO_REUSEADDR is not applied for those
multicast connections because OSMO_SOCK_F_UDP_REUSEADDR is not set. This
makes prevents the proper function of UDP multicast.
- Make sure OSMO_SOCK_F_UDP_REUSEADDR is set
Change-Id: Ia1014ac5e0522e77178249cdc6398dec2168bffe
Depends: libosmocore I1399a428467ca12f1564a14eb8ffb294d4f59874
Related: OS#3497
osmocon.c: In function ‘read_file’:
osmocon.c:317:3: warning: ‘fd’ may be used uninitialized in this function
Change-Id: If07c58d5b55c18c05345607064eace02748935f8
Use osmo_clock_gettime() to read the monotonic clock instead
of gettimeofday() which could drift backwards.
This requires switching the scheduler clock from struct timeval
to struct timespec. Expand some variables to 64 bits in order
to keep types used in calculations compatible.
The previous implementation unconditionally subtracted microsecond
values from different time measurements, causing overflow if the
current measurement was taken in less of a fraction of a second
than the past measurement. Use timespecsub() for the subtraction
instead which accounts for fractions of a second correctly.
Change-Id: Ic93f90685c6d6dc28dfc4ad48c998e0eac113cf8
Related: OS#3467
This field of the logical channel state structure was not used at
all as there is nothing related to A-bis / RSL in trxcon itself.
Change-Id: Iec1abf777a74cf57deadafa95e2337cba5d02842
When relying on GSM 04.08 channel mode (GSM48_CMODE_*), one should
distinguish between Bm (full rate) and Lm (half rate) channels.
This change prevents the scheduler from generating TCH/F BFI
instead of TCH/H BFI on the corresponding channels.
Change-Id: I4547aa7f6d38637692fef8a0122e85fb52039a46
Instead of passing the information about a logical channel, it
makes sense to pass the pointer to its state where everything
is stored. This approach would allow to avoid adding more
arguments every time, e.g. in case of AMR.
Change-Id: I91fe86fef43aac68776a58c9acc37ef2a9ee8042
Initially it was assumed that FACCH prioritization should be done
in the same way for both TCH/F and TCH/H. Moreover, it was not
possible to confirm this, because TCH/H was (and still) not
implemented yet. But according to the specs:
- unlike FACCH/F, FACCH/H transmissions shall be aligned
within a multiframe, i.e. can only be initiated on
particular frame numbers (see GSM 05.02, clause 7);
- unlike FACCH/F, a FACCH/H frame steals two TCH/F frames;
so the TCH/H (including FACCH/H) primitives should be handled
separately from the TCH/F (including FACCH/F) primitives.
Change-Id: I9b59f60e1cbac8fb8fd557b6c67b5e376c0a6bbb
The previous primitive dequeuing logic (especially for TCH/F
channels) was a bit complicated, and it could not be possible
to reuse the existing code parts in the upcoming implementation
of both TCH/H and FACCH/H channels without changing anything.
In particular, this change introduces two internal functions:
- prim_dequeue_one(), which merely dequeues a primitive
of a given channel type (e.g. TRXC_SDCCH4_0);
- prim_dequeue_tch(), which dequeues either a FACCH,
or a speech TCH primitive of a given channel
type (Lm or Bm).
So the logic of the TCH/F prim dequeuing function has become
cleaner, and the upcoming TCH/H prim dequeuing function, where
FACCH/H prioritization is more complex than FACCH/F, will
reuse the introduced functions.
Change-Id: Ib82ad2480ab1bc6b1df9576eb2bf5acbd398bf66
settings.c: In function ‘gsm_random_imei’:
settings.c:188:26: warning: ‘sprintf’ may write a terminating nul past the end of the destination [-Wformat-overflow=]
sprintf(rand + 8, "%07ld", random() % 10000000);
^
settings.c:188:2: note: ‘sprintf’ output between 8 and 9 bytes into a destination of size 8
sprintf(rand + 8, "%07ld", random() % 10000000);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Change-Id: Id949487111235cd4af5ff068f1dce2f4b0801480
settings.c:191:2: warning: ‘strncpy’ output may be truncated copying 15 bytes from a string of length 15 -Wstringop-truncation]
strncpy(set->imeisv, set->imei, 15);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CC subscriber.o
CC support.o
CC transaction.o
CC vty_interface.o
CC voice.o
CC mncc_sock.o
CC primitives.o
mncc_sock.c: In function ‘osmo_unixsock_listen’:
mncc_sock.c:318:2: warning: ‘strncpy’ specified bound 108 equals destination size [-Wstringop-truncation]
strncpy(local.sun_path, path, sizeof(local.sun_path));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CC script_lua.o
vty_interface.c: In function ‘cfg_gps_device’:
vty_interface.c:1144:2: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
strncpy(g.device, argv[0], sizeof(g.device));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
AR libmobile.a
Change-Id: Id52978f3bf7a8abea62237d7c32f8f87e1bb34a1
gsm322.c:366:22: warning: ‘sprintf’ may write a terminating nul past the end of the destination [-Wformat-overflow=]
sprintf(string, "-%d", 110 - rxlev);
^
gsm322.c:366:2: note: ‘sprintf’ output between 3 and 6 bytes into a destination of size 5
sprintf(string, "-%d", 110 - rxlev);
Change-Id: I7b19fef89ba0cb0c1edbdd62c46ad8395e44145b
We use this in the network-side Osmocom projects (CNI) and it's
useful to have the same flags also for the OsmocomBB host software.
Change-Id: I45800c937d665fdbd2dd6b0cee38408f587f1a9f
Vadim Yanitskiy
Harald Welte
Philipp Maier