To create another instance: 'ms <name> create'
To remove an instance: 'no ms <name>'
If no instance exists, 'ms 1' is created automatically on startup.
Each instance can be enabled / disabled by using 'shutdown' or
'no shutdown'. Multiple instances may share the same layer2 socket (same
phone hardware), but in this case only one instance can be enabled at the
same time. This makes it much easier to select different settings without
modifying them.
A 'shutdown' initiates the IMSI detach procedure before shutdown is
completed. A 'shutdown force' will immidiately shutdown.
There is no need to restart the software anymore, if fundamental settings
are changed. In this case, a 'shutdown' followed by a 'no shutdown' will
do the job.
If you already have an old osmocom.cfg, you need to "no shutdown" it.
Everything else behaves as before.
There are two criterions for lossing a signal, idle mode and dedicated mode.
A counter counts down when a frame is dropped, and counts up when a valid
frame is received on certain channel. The loss criterion is reached, if the
counter reaches 0. The values added to / removed from the counter and the
limits depend on the process.
The cell provides SYSTEM INFORMATION 5* and 6. These are used to create a
list of neighbor cells to monitor. Because there is no neighbor cell
monitoring supported by layer1, the list has no valid results yet.
Currently the average RX level of received frames are used to generate a new
report every second. The report is transmitted to layer1 and used there
whenever a measurement report has to be transmitted.
The timing advance and the current transmit power (as requested by network),
is included with every report.
The SIM client is now complete. Because it usefull for multiple
applications, i moved it to the layer23/src/common directory.
The SIM reader works together with mobile process. Fixes were made.
Thanx to all for testing, finding bugs, and making it work as it is
supposed to do.
The current version uses special L1CTL messages to send and receive APDUs.
This will change in the future, when BTSAP interface is completed.
Please note that this client will not work until the layer1 SIM reader
fixes and extensions are committed.
This split the headers and adapt the source.
We use osmocom/bb as a prefix because libosomore also
uses osmocom and generic names such as misc & common could
conflict in the future.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
We split into :
- common: Everything that can be shared
- mobile: The real spec compliant mobile phones
- misc: Different test stuff
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>