Allow top-level Makefile to use arm-none-eabi toolchain
The gnuarm.com toolchain works fine but is very old. And although it is based on newlib, the tuple that we used to configure for was arm-elf-linux, which is bogus since we aren't building for Linux. This patch optimizes for the CodeSourcery G++ Lite 2010.09 ARM EABI toolchain instead, and for libosmocore installation it assumes that the new toolchain was unpacked next to the old one. Download it here: http://www.codesourcery.com/sgpp/lite/arm/portal/release1592 (The Linux Installer seems not to work reliably so I recommend the TAR.) Since CC is detected by configure when the host tuple points to a sane toolchain we shouldn't hard-code the gnuarm.com compiler. The patch autodetects arm-elf-gcc installed in PATH, and uses arm-elf as prefix if it is found. Otherwise, it defaults to arm-none-eabi. make CROSS_HOST=arm-xyzzy can be used to override on the command line. Author: Peter Stuge <peter@stuge.se> Acked-by: Sylvain Munaut <tnt@246tNt.com>
This commit is contained in:
parent
aa2f2fdfa1
commit
b22c05dc6d
11
src/Makefile
11
src/Makefile
|
@ -1,10 +1,13 @@
|
|||
|
||||
# this is not really used as we don't do 'make install'. You can still specify
|
||||
# it in case you _want_ to manually 'make install' the target libosmocore.
|
||||
CROSS_INST_PREFIX=/usr/local/stow/osmocom-bb/arm-elf
|
||||
CROSS_INST_PREFIX ?= /usr/local/stow/osmocom-bb/arm-2010.09
|
||||
|
||||
# this is the host tuple of your cross-toolchain
|
||||
CROSS_HOST ?= $(shell which arm-elf-gcc >/dev/null 2>&1 && echo arm-elf || echo arm-none-eabi)
|
||||
|
||||
# this is the prefix of your cross-toolchain programs
|
||||
CROSS_TOOL_PREFIX=arm-elf-
|
||||
CROSS_TOOL_PREFIX=$(CROSS_HOST)-
|
||||
|
||||
TOPDIR=$(shell pwd)
|
||||
OSMOCORE_CONFIGURE_ENV= LIBOSMOCORE_LIBS=$(TOPDIR)/shared/libosmocore/build-host/src/.libs/libosmocore.a \
|
||||
|
@ -37,9 +40,9 @@ shared/libosmocore/build-target:
|
|||
|
||||
shared/libosmocore/build-target/Makefile: shared/libosmocore/configure shared/libosmocore/build-target
|
||||
cd shared/libosmocore/build-target && ../configure \
|
||||
--host=arm-elf-linux --disable-vty --enable-panic-infloop \
|
||||
--host=$(CROSS_HOST) --disable-vty --enable-panic-infloop \
|
||||
--disable-shared --disable-talloc --disable-tests \
|
||||
CC="$(CROSS_TOOL_PREFIX)gcc" CFLAGS="-Os -ffunction-sections -I$(TOPDIR)/target/firmware/include -nostartfiles -nodefaultlibs"
|
||||
CFLAGS="-Os -ffunction-sections -I$(TOPDIR)/target/firmware/include -nostartfiles -nodefaultlibs"
|
||||
|
||||
shared/libosmocore/build-target/src/.libs/libosmocore.a: shared/libosmocore/build-target/Makefile
|
||||
cd shared/libosmocore/build-target && make
|
||||
|
|
Loading…
Reference in New Issue