target/fake_trx: initial release of virtual transceiver
This is a set of tools for creating a virtual Um-interface between
OsmocomBB and OsmoBTS. It may be extremely useful for testing and
development of GSM stack, including both sides (MS and BTS). This
software implements OsmoTRX (Osmocom's fork of OpenBTS transceiver)
style clock (CLCK), control (CTRL) and data interfaces. So, OsmoBTS
source code doesn't require any modifications, while for OsmocomBB
you will need to use a new application - trxcon, which can be found
in the 'fixeria/sdr_phy' branch until one is merged to master.
Brief description of available applications:
- fake_trx.py - main application, that allows to connect both
OsmocomBB and OsmoBTS without actual RF hardware. Currently
only a single MS may work with a single BTS.
- clck_gen.py - a peripheral tool aimed to emulate TDMA frame
clock generator. Could be used for testing and clock
synchronization of multiple applications. It should be noted,
that one relays on generic system timer (via Python), so
a random clock jitter takes place.
- ctrl_cmd.py - another peripheral tool, which could be used
for sending CTRL commands directly in manual mode, and also
for application fuzzing.
Change-Id: Ib1fb80682002ac85a72fa6abef459a4c44f4ab97
2017-07-10 12:39:06 +00:00
|
|
|
#!/usr/bin/env python2
|
|
|
|
# -*- coding: utf-8 -*-
|
|
|
|
|
2018-03-12 18:09:56 +00:00
|
|
|
# TRX Toolkit
|
target/fake_trx: initial release of virtual transceiver
This is a set of tools for creating a virtual Um-interface between
OsmocomBB and OsmoBTS. It may be extremely useful for testing and
development of GSM stack, including both sides (MS and BTS). This
software implements OsmoTRX (Osmocom's fork of OpenBTS transceiver)
style clock (CLCK), control (CTRL) and data interfaces. So, OsmoBTS
source code doesn't require any modifications, while for OsmocomBB
you will need to use a new application - trxcon, which can be found
in the 'fixeria/sdr_phy' branch until one is merged to master.
Brief description of available applications:
- fake_trx.py - main application, that allows to connect both
OsmocomBB and OsmoBTS without actual RF hardware. Currently
only a single MS may work with a single BTS.
- clck_gen.py - a peripheral tool aimed to emulate TDMA frame
clock generator. Could be used for testing and clock
synchronization of multiple applications. It should be noted,
that one relays on generic system timer (via Python), so
a random clock jitter takes place.
- ctrl_cmd.py - another peripheral tool, which could be used
for sending CTRL commands directly in manual mode, and also
for application fuzzing.
Change-Id: Ib1fb80682002ac85a72fa6abef459a4c44f4ab97
2017-07-10 12:39:06 +00:00
|
|
|
# Simple TDMA frame clock generator
|
|
|
|
#
|
2018-03-12 13:48:24 +00:00
|
|
|
# (C) 2017-2018 by Vadim Yanitskiy <axilirator@gmail.com>
|
target/fake_trx: initial release of virtual transceiver
This is a set of tools for creating a virtual Um-interface between
OsmocomBB and OsmoBTS. It may be extremely useful for testing and
development of GSM stack, including both sides (MS and BTS). This
software implements OsmoTRX (Osmocom's fork of OpenBTS transceiver)
style clock (CLCK), control (CTRL) and data interfaces. So, OsmoBTS
source code doesn't require any modifications, while for OsmocomBB
you will need to use a new application - trxcon, which can be found
in the 'fixeria/sdr_phy' branch until one is merged to master.
Brief description of available applications:
- fake_trx.py - main application, that allows to connect both
OsmocomBB and OsmoBTS without actual RF hardware. Currently
only a single MS may work with a single BTS.
- clck_gen.py - a peripheral tool aimed to emulate TDMA frame
clock generator. Could be used for testing and clock
synchronization of multiple applications. It should be noted,
that one relays on generic system timer (via Python), so
a random clock jitter takes place.
- ctrl_cmd.py - another peripheral tool, which could be used
for sending CTRL commands directly in manual mode, and also
for application fuzzing.
Change-Id: Ib1fb80682002ac85a72fa6abef459a4c44f4ab97
2017-07-10 12:39:06 +00:00
|
|
|
#
|
|
|
|
# All Rights Reserved
|
|
|
|
#
|
|
|
|
# This program is free software; you can redistribute it and/or modify
|
|
|
|
# it under the terms of the GNU General Public License as published by
|
|
|
|
# the Free Software Foundation; either version 2 of the License, or
|
|
|
|
# (at your option) any later version.
|
|
|
|
#
|
|
|
|
# This program is distributed in the hope that it will be useful,
|
|
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
# GNU General Public License for more details.
|
|
|
|
#
|
|
|
|
# You should have received a copy of the GNU General Public License along
|
|
|
|
# with this program; if not, write to the Free Software Foundation, Inc.,
|
|
|
|
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
|
|
|
|
2018-03-12 13:48:24 +00:00
|
|
|
from copyright import print_copyright
|
|
|
|
CR_HOLDERS = [("2017-2018", "Vadim Yanitskiy <axilirator@gmail.com>")]
|
|
|
|
|
trx_toolkit: use generic logging module instead of print()
There are multiple advantages of using Python's logging module:
- advanced message formatting (file name, line number, etc.),
- multiple logging targets (e.g. stderr, file, socket),
- logging levels (e.g. DEBUG, INFO, ERROR),
- the pythonic way ;)
so, let's replace multiple print() calls by logging calls,
add use the following logging message format by default:
[%(levelname)s] %(filename)s:%(lineno)d %(message)s
Examples:
[INFO] ctrl_if_bts.py:57 Starting transceiver...
[DEBUG] clck_gen.py:87 IND CLOCK 26826
[DEBUG] ctrl_if_bts.py:71 Recv POWEROFF cmd
[INFO] ctrl_if_bts.py:73 Stopping transceiver...
[INFO] fake_trx.py:127 Shutting down...
Please note that there is no way to filter messages by logging
level yet. This is to be introduced soon, together with argparse.
Change-Id: I7fcafabafe8323b58990997a47afdd48b6d1f357
2018-12-06 22:00:26 +00:00
|
|
|
import logging as log
|
target/fake_trx: initial release of virtual transceiver
This is a set of tools for creating a virtual Um-interface between
OsmocomBB and OsmoBTS. It may be extremely useful for testing and
development of GSM stack, including both sides (MS and BTS). This
software implements OsmoTRX (Osmocom's fork of OpenBTS transceiver)
style clock (CLCK), control (CTRL) and data interfaces. So, OsmoBTS
source code doesn't require any modifications, while for OsmocomBB
you will need to use a new application - trxcon, which can be found
in the 'fixeria/sdr_phy' branch until one is merged to master.
Brief description of available applications:
- fake_trx.py - main application, that allows to connect both
OsmocomBB and OsmoBTS without actual RF hardware. Currently
only a single MS may work with a single BTS.
- clck_gen.py - a peripheral tool aimed to emulate TDMA frame
clock generator. Could be used for testing and clock
synchronization of multiple applications. It should be noted,
that one relays on generic system timer (via Python), so
a random clock jitter takes place.
- ctrl_cmd.py - another peripheral tool, which could be used
for sending CTRL commands directly in manual mode, and also
for application fuzzing.
Change-Id: Ib1fb80682002ac85a72fa6abef459a4c44f4ab97
2017-07-10 12:39:06 +00:00
|
|
|
import signal
|
|
|
|
import time
|
|
|
|
import sys
|
|
|
|
|
|
|
|
from threading import Timer
|
|
|
|
from udp_link import UDPLink
|
2018-01-24 16:58:48 +00:00
|
|
|
from gsm_shared import *
|
target/fake_trx: initial release of virtual transceiver
This is a set of tools for creating a virtual Um-interface between
OsmocomBB and OsmoBTS. It may be extremely useful for testing and
development of GSM stack, including both sides (MS and BTS). This
software implements OsmoTRX (Osmocom's fork of OpenBTS transceiver)
style clock (CLCK), control (CTRL) and data interfaces. So, OsmoBTS
source code doesn't require any modifications, while for OsmocomBB
you will need to use a new application - trxcon, which can be found
in the 'fixeria/sdr_phy' branch until one is merged to master.
Brief description of available applications:
- fake_trx.py - main application, that allows to connect both
OsmocomBB and OsmoBTS without actual RF hardware. Currently
only a single MS may work with a single BTS.
- clck_gen.py - a peripheral tool aimed to emulate TDMA frame
clock generator. Could be used for testing and clock
synchronization of multiple applications. It should be noted,
that one relays on generic system timer (via Python), so
a random clock jitter takes place.
- ctrl_cmd.py - another peripheral tool, which could be used
for sending CTRL commands directly in manual mode, and also
for application fuzzing.
Change-Id: Ib1fb80682002ac85a72fa6abef459a4c44f4ab97
2017-07-10 12:39:06 +00:00
|
|
|
|
|
|
|
class CLCKGen:
|
|
|
|
# GSM TDMA definitions
|
|
|
|
SEC_DELAY_US = 1000 * 1000
|
|
|
|
GSM_FRAME_US = 4615.0
|
|
|
|
|
|
|
|
# Average loop back delay
|
|
|
|
LO_DELAY_US = 90.0
|
|
|
|
|
2017-12-08 18:22:24 +00:00
|
|
|
# State variables
|
|
|
|
timer = None
|
|
|
|
|
target/fake_trx: initial release of virtual transceiver
This is a set of tools for creating a virtual Um-interface between
OsmocomBB and OsmoBTS. It may be extremely useful for testing and
development of GSM stack, including both sides (MS and BTS). This
software implements OsmoTRX (Osmocom's fork of OpenBTS transceiver)
style clock (CLCK), control (CTRL) and data interfaces. So, OsmoBTS
source code doesn't require any modifications, while for OsmocomBB
you will need to use a new application - trxcon, which can be found
in the 'fixeria/sdr_phy' branch until one is merged to master.
Brief description of available applications:
- fake_trx.py - main application, that allows to connect both
OsmocomBB and OsmoBTS without actual RF hardware. Currently
only a single MS may work with a single BTS.
- clck_gen.py - a peripheral tool aimed to emulate TDMA frame
clock generator. Could be used for testing and clock
synchronization of multiple applications. It should be noted,
that one relays on generic system timer (via Python), so
a random clock jitter takes place.
- ctrl_cmd.py - another peripheral tool, which could be used
for sending CTRL commands directly in manual mode, and also
for application fuzzing.
Change-Id: Ib1fb80682002ac85a72fa6abef459a4c44f4ab97
2017-07-10 12:39:06 +00:00
|
|
|
def __init__(self, clck_links, clck_start = 0, ind_period = 102):
|
|
|
|
self.clck_links = clck_links
|
|
|
|
self.ind_period = ind_period
|
2017-12-08 18:24:05 +00:00
|
|
|
self.clck_start = clck_start
|
target/fake_trx: initial release of virtual transceiver
This is a set of tools for creating a virtual Um-interface between
OsmocomBB and OsmoBTS. It may be extremely useful for testing and
development of GSM stack, including both sides (MS and BTS). This
software implements OsmoTRX (Osmocom's fork of OpenBTS transceiver)
style clock (CLCK), control (CTRL) and data interfaces. So, OsmoBTS
source code doesn't require any modifications, while for OsmocomBB
you will need to use a new application - trxcon, which can be found
in the 'fixeria/sdr_phy' branch until one is merged to master.
Brief description of available applications:
- fake_trx.py - main application, that allows to connect both
OsmocomBB and OsmoBTS without actual RF hardware. Currently
only a single MS may work with a single BTS.
- clck_gen.py - a peripheral tool aimed to emulate TDMA frame
clock generator. Could be used for testing and clock
synchronization of multiple applications. It should be noted,
that one relays on generic system timer (via Python), so
a random clock jitter takes place.
- ctrl_cmd.py - another peripheral tool, which could be used
for sending CTRL commands directly in manual mode, and also
for application fuzzing.
Change-Id: Ib1fb80682002ac85a72fa6abef459a4c44f4ab97
2017-07-10 12:39:06 +00:00
|
|
|
self.clck_src = clck_start
|
|
|
|
|
|
|
|
# Calculate counter time
|
|
|
|
self.ctr_interval = self.GSM_FRAME_US - self.LO_DELAY_US
|
|
|
|
self.ctr_interval /= self.SEC_DELAY_US
|
|
|
|
self.ctr_interval *= self.ind_period
|
|
|
|
|
|
|
|
def start(self):
|
2017-12-08 18:22:24 +00:00
|
|
|
# Send the first indication
|
|
|
|
self.send_clck_ind()
|
target/fake_trx: initial release of virtual transceiver
This is a set of tools for creating a virtual Um-interface between
OsmocomBB and OsmoBTS. It may be extremely useful for testing and
development of GSM stack, including both sides (MS and BTS). This
software implements OsmoTRX (Osmocom's fork of OpenBTS transceiver)
style clock (CLCK), control (CTRL) and data interfaces. So, OsmoBTS
source code doesn't require any modifications, while for OsmocomBB
you will need to use a new application - trxcon, which can be found
in the 'fixeria/sdr_phy' branch until one is merged to master.
Brief description of available applications:
- fake_trx.py - main application, that allows to connect both
OsmocomBB and OsmoBTS without actual RF hardware. Currently
only a single MS may work with a single BTS.
- clck_gen.py - a peripheral tool aimed to emulate TDMA frame
clock generator. Could be used for testing and clock
synchronization of multiple applications. It should be noted,
that one relays on generic system timer (via Python), so
a random clock jitter takes place.
- ctrl_cmd.py - another peripheral tool, which could be used
for sending CTRL commands directly in manual mode, and also
for application fuzzing.
Change-Id: Ib1fb80682002ac85a72fa6abef459a4c44f4ab97
2017-07-10 12:39:06 +00:00
|
|
|
|
|
|
|
def stop(self):
|
2017-12-08 18:22:24 +00:00
|
|
|
# Stop pending timer
|
|
|
|
if self.timer is not None:
|
|
|
|
self.timer.cancel()
|
|
|
|
self.timer = None
|
target/fake_trx: initial release of virtual transceiver
This is a set of tools for creating a virtual Um-interface between
OsmocomBB and OsmoBTS. It may be extremely useful for testing and
development of GSM stack, including both sides (MS and BTS). This
software implements OsmoTRX (Osmocom's fork of OpenBTS transceiver)
style clock (CLCK), control (CTRL) and data interfaces. So, OsmoBTS
source code doesn't require any modifications, while for OsmocomBB
you will need to use a new application - trxcon, which can be found
in the 'fixeria/sdr_phy' branch until one is merged to master.
Brief description of available applications:
- fake_trx.py - main application, that allows to connect both
OsmocomBB and OsmoBTS without actual RF hardware. Currently
only a single MS may work with a single BTS.
- clck_gen.py - a peripheral tool aimed to emulate TDMA frame
clock generator. Could be used for testing and clock
synchronization of multiple applications. It should be noted,
that one relays on generic system timer (via Python), so
a random clock jitter takes place.
- ctrl_cmd.py - another peripheral tool, which could be used
for sending CTRL commands directly in manual mode, and also
for application fuzzing.
Change-Id: Ib1fb80682002ac85a72fa6abef459a4c44f4ab97
2017-07-10 12:39:06 +00:00
|
|
|
|
2017-12-08 18:24:05 +00:00
|
|
|
# Reset the clock source
|
|
|
|
self.clck_src = self.clck_start
|
|
|
|
|
target/fake_trx: initial release of virtual transceiver
This is a set of tools for creating a virtual Um-interface between
OsmocomBB and OsmoBTS. It may be extremely useful for testing and
development of GSM stack, including both sides (MS and BTS). This
software implements OsmoTRX (Osmocom's fork of OpenBTS transceiver)
style clock (CLCK), control (CTRL) and data interfaces. So, OsmoBTS
source code doesn't require any modifications, while for OsmocomBB
you will need to use a new application - trxcon, which can be found
in the 'fixeria/sdr_phy' branch until one is merged to master.
Brief description of available applications:
- fake_trx.py - main application, that allows to connect both
OsmocomBB and OsmoBTS without actual RF hardware. Currently
only a single MS may work with a single BTS.
- clck_gen.py - a peripheral tool aimed to emulate TDMA frame
clock generator. Could be used for testing and clock
synchronization of multiple applications. It should be noted,
that one relays on generic system timer (via Python), so
a random clock jitter takes place.
- ctrl_cmd.py - another peripheral tool, which could be used
for sending CTRL commands directly in manual mode, and also
for application fuzzing.
Change-Id: Ib1fb80682002ac85a72fa6abef459a4c44f4ab97
2017-07-10 12:39:06 +00:00
|
|
|
def send_clck_ind(self):
|
|
|
|
# Keep clock cycle
|
2018-01-24 16:58:48 +00:00
|
|
|
if self.clck_src % GSM_HYPERFRAME >= 0:
|
|
|
|
self.clck_src %= GSM_HYPERFRAME
|
target/fake_trx: initial release of virtual transceiver
This is a set of tools for creating a virtual Um-interface between
OsmocomBB and OsmoBTS. It may be extremely useful for testing and
development of GSM stack, including both sides (MS and BTS). This
software implements OsmoTRX (Osmocom's fork of OpenBTS transceiver)
style clock (CLCK), control (CTRL) and data interfaces. So, OsmoBTS
source code doesn't require any modifications, while for OsmocomBB
you will need to use a new application - trxcon, which can be found
in the 'fixeria/sdr_phy' branch until one is merged to master.
Brief description of available applications:
- fake_trx.py - main application, that allows to connect both
OsmocomBB and OsmoBTS without actual RF hardware. Currently
only a single MS may work with a single BTS.
- clck_gen.py - a peripheral tool aimed to emulate TDMA frame
clock generator. Could be used for testing and clock
synchronization of multiple applications. It should be noted,
that one relays on generic system timer (via Python), so
a random clock jitter takes place.
- ctrl_cmd.py - another peripheral tool, which could be used
for sending CTRL commands directly in manual mode, and also
for application fuzzing.
Change-Id: Ib1fb80682002ac85a72fa6abef459a4c44f4ab97
2017-07-10 12:39:06 +00:00
|
|
|
|
|
|
|
# We don't need to send so often
|
|
|
|
if self.clck_src % self.ind_period == 0:
|
|
|
|
# Create UDP payload
|
|
|
|
payload = "IND CLOCK %u\0" % self.clck_src
|
|
|
|
|
|
|
|
# Send indication to all UDP links
|
|
|
|
for link in self.clck_links:
|
|
|
|
link.send(payload)
|
|
|
|
|
|
|
|
# Debug print
|
trx_toolkit: use generic logging module instead of print()
There are multiple advantages of using Python's logging module:
- advanced message formatting (file name, line number, etc.),
- multiple logging targets (e.g. stderr, file, socket),
- logging levels (e.g. DEBUG, INFO, ERROR),
- the pythonic way ;)
so, let's replace multiple print() calls by logging calls,
add use the following logging message format by default:
[%(levelname)s] %(filename)s:%(lineno)d %(message)s
Examples:
[INFO] ctrl_if_bts.py:57 Starting transceiver...
[DEBUG] clck_gen.py:87 IND CLOCK 26826
[DEBUG] ctrl_if_bts.py:71 Recv POWEROFF cmd
[INFO] ctrl_if_bts.py:73 Stopping transceiver...
[INFO] fake_trx.py:127 Shutting down...
Please note that there is no way to filter messages by logging
level yet. This is to be introduced soon, together with argparse.
Change-Id: I7fcafabafe8323b58990997a47afdd48b6d1f357
2018-12-06 22:00:26 +00:00
|
|
|
log.debug(payload)
|
target/fake_trx: initial release of virtual transceiver
This is a set of tools for creating a virtual Um-interface between
OsmocomBB and OsmoBTS. It may be extremely useful for testing and
development of GSM stack, including both sides (MS and BTS). This
software implements OsmoTRX (Osmocom's fork of OpenBTS transceiver)
style clock (CLCK), control (CTRL) and data interfaces. So, OsmoBTS
source code doesn't require any modifications, while for OsmocomBB
you will need to use a new application - trxcon, which can be found
in the 'fixeria/sdr_phy' branch until one is merged to master.
Brief description of available applications:
- fake_trx.py - main application, that allows to connect both
OsmocomBB and OsmoBTS without actual RF hardware. Currently
only a single MS may work with a single BTS.
- clck_gen.py - a peripheral tool aimed to emulate TDMA frame
clock generator. Could be used for testing and clock
synchronization of multiple applications. It should be noted,
that one relays on generic system timer (via Python), so
a random clock jitter takes place.
- ctrl_cmd.py - another peripheral tool, which could be used
for sending CTRL commands directly in manual mode, and also
for application fuzzing.
Change-Id: Ib1fb80682002ac85a72fa6abef459a4c44f4ab97
2017-07-10 12:39:06 +00:00
|
|
|
|
|
|
|
# Increase frame count
|
|
|
|
self.clck_src += self.ind_period
|
|
|
|
|
|
|
|
# Schedule a new indication
|
|
|
|
self.timer = Timer(self.ctr_interval, self.send_clck_ind)
|
|
|
|
self.timer.start()
|
|
|
|
|
|
|
|
# Just a wrapper for independent usage
|
|
|
|
class Application:
|
|
|
|
def __init__(self):
|
2018-03-12 13:48:24 +00:00
|
|
|
# Print copyright
|
|
|
|
print_copyright(CR_HOLDERS)
|
|
|
|
|
target/fake_trx: initial release of virtual transceiver
This is a set of tools for creating a virtual Um-interface between
OsmocomBB and OsmoBTS. It may be extremely useful for testing and
development of GSM stack, including both sides (MS and BTS). This
software implements OsmoTRX (Osmocom's fork of OpenBTS transceiver)
style clock (CLCK), control (CTRL) and data interfaces. So, OsmoBTS
source code doesn't require any modifications, while for OsmocomBB
you will need to use a new application - trxcon, which can be found
in the 'fixeria/sdr_phy' branch until one is merged to master.
Brief description of available applications:
- fake_trx.py - main application, that allows to connect both
OsmocomBB and OsmoBTS without actual RF hardware. Currently
only a single MS may work with a single BTS.
- clck_gen.py - a peripheral tool aimed to emulate TDMA frame
clock generator. Could be used for testing and clock
synchronization of multiple applications. It should be noted,
that one relays on generic system timer (via Python), so
a random clock jitter takes place.
- ctrl_cmd.py - another peripheral tool, which could be used
for sending CTRL commands directly in manual mode, and also
for application fuzzing.
Change-Id: Ib1fb80682002ac85a72fa6abef459a4c44f4ab97
2017-07-10 12:39:06 +00:00
|
|
|
# Set up signal handlers
|
|
|
|
signal.signal(signal.SIGINT, self.sig_handler)
|
|
|
|
|
trx_toolkit: use generic logging module instead of print()
There are multiple advantages of using Python's logging module:
- advanced message formatting (file name, line number, etc.),
- multiple logging targets (e.g. stderr, file, socket),
- logging levels (e.g. DEBUG, INFO, ERROR),
- the pythonic way ;)
so, let's replace multiple print() calls by logging calls,
add use the following logging message format by default:
[%(levelname)s] %(filename)s:%(lineno)d %(message)s
Examples:
[INFO] ctrl_if_bts.py:57 Starting transceiver...
[DEBUG] clck_gen.py:87 IND CLOCK 26826
[DEBUG] ctrl_if_bts.py:71 Recv POWEROFF cmd
[INFO] ctrl_if_bts.py:73 Stopping transceiver...
[INFO] fake_trx.py:127 Shutting down...
Please note that there is no way to filter messages by logging
level yet. This is to be introduced soon, together with argparse.
Change-Id: I7fcafabafe8323b58990997a47afdd48b6d1f357
2018-12-06 22:00:26 +00:00
|
|
|
# Configure logging
|
|
|
|
log.basicConfig(level = log.DEBUG,
|
|
|
|
format = "[%(levelname)s] %(filename)s:%(lineno)d %(message)s")
|
|
|
|
|
target/fake_trx: initial release of virtual transceiver
This is a set of tools for creating a virtual Um-interface between
OsmocomBB and OsmoBTS. It may be extremely useful for testing and
development of GSM stack, including both sides (MS and BTS). This
software implements OsmoTRX (Osmocom's fork of OpenBTS transceiver)
style clock (CLCK), control (CTRL) and data interfaces. So, OsmoBTS
source code doesn't require any modifications, while for OsmocomBB
you will need to use a new application - trxcon, which can be found
in the 'fixeria/sdr_phy' branch until one is merged to master.
Brief description of available applications:
- fake_trx.py - main application, that allows to connect both
OsmocomBB and OsmoBTS without actual RF hardware. Currently
only a single MS may work with a single BTS.
- clck_gen.py - a peripheral tool aimed to emulate TDMA frame
clock generator. Could be used for testing and clock
synchronization of multiple applications. It should be noted,
that one relays on generic system timer (via Python), so
a random clock jitter takes place.
- ctrl_cmd.py - another peripheral tool, which could be used
for sending CTRL commands directly in manual mode, and also
for application fuzzing.
Change-Id: Ib1fb80682002ac85a72fa6abef459a4c44f4ab97
2017-07-10 12:39:06 +00:00
|
|
|
def run(self):
|
2018-03-21 12:46:34 +00:00
|
|
|
self.link = UDPLink("127.0.0.1", 5800, "0.0.0.0", 5700)
|
target/fake_trx: initial release of virtual transceiver
This is a set of tools for creating a virtual Um-interface between
OsmocomBB and OsmoBTS. It may be extremely useful for testing and
development of GSM stack, including both sides (MS and BTS). This
software implements OsmoTRX (Osmocom's fork of OpenBTS transceiver)
style clock (CLCK), control (CTRL) and data interfaces. So, OsmoBTS
source code doesn't require any modifications, while for OsmocomBB
you will need to use a new application - trxcon, which can be found
in the 'fixeria/sdr_phy' branch until one is merged to master.
Brief description of available applications:
- fake_trx.py - main application, that allows to connect both
OsmocomBB and OsmoBTS without actual RF hardware. Currently
only a single MS may work with a single BTS.
- clck_gen.py - a peripheral tool aimed to emulate TDMA frame
clock generator. Could be used for testing and clock
synchronization of multiple applications. It should be noted,
that one relays on generic system timer (via Python), so
a random clock jitter takes place.
- ctrl_cmd.py - another peripheral tool, which could be used
for sending CTRL commands directly in manual mode, and also
for application fuzzing.
Change-Id: Ib1fb80682002ac85a72fa6abef459a4c44f4ab97
2017-07-10 12:39:06 +00:00
|
|
|
self.clck = CLCKGen([self.link], ind_period = 51)
|
|
|
|
self.clck.start()
|
|
|
|
|
|
|
|
def sig_handler(self, signum, frame):
|
trx_toolkit: use generic logging module instead of print()
There are multiple advantages of using Python's logging module:
- advanced message formatting (file name, line number, etc.),
- multiple logging targets (e.g. stderr, file, socket),
- logging levels (e.g. DEBUG, INFO, ERROR),
- the pythonic way ;)
so, let's replace multiple print() calls by logging calls,
add use the following logging message format by default:
[%(levelname)s] %(filename)s:%(lineno)d %(message)s
Examples:
[INFO] ctrl_if_bts.py:57 Starting transceiver...
[DEBUG] clck_gen.py:87 IND CLOCK 26826
[DEBUG] ctrl_if_bts.py:71 Recv POWEROFF cmd
[INFO] ctrl_if_bts.py:73 Stopping transceiver...
[INFO] fake_trx.py:127 Shutting down...
Please note that there is no way to filter messages by logging
level yet. This is to be introduced soon, together with argparse.
Change-Id: I7fcafabafe8323b58990997a47afdd48b6d1f357
2018-12-06 22:00:26 +00:00
|
|
|
log.info("Signal %d received" % signum)
|
target/fake_trx: initial release of virtual transceiver
This is a set of tools for creating a virtual Um-interface between
OsmocomBB and OsmoBTS. It may be extremely useful for testing and
development of GSM stack, including both sides (MS and BTS). This
software implements OsmoTRX (Osmocom's fork of OpenBTS transceiver)
style clock (CLCK), control (CTRL) and data interfaces. So, OsmoBTS
source code doesn't require any modifications, while for OsmocomBB
you will need to use a new application - trxcon, which can be found
in the 'fixeria/sdr_phy' branch until one is merged to master.
Brief description of available applications:
- fake_trx.py - main application, that allows to connect both
OsmocomBB and OsmoBTS without actual RF hardware. Currently
only a single MS may work with a single BTS.
- clck_gen.py - a peripheral tool aimed to emulate TDMA frame
clock generator. Could be used for testing and clock
synchronization of multiple applications. It should be noted,
that one relays on generic system timer (via Python), so
a random clock jitter takes place.
- ctrl_cmd.py - another peripheral tool, which could be used
for sending CTRL commands directly in manual mode, and also
for application fuzzing.
Change-Id: Ib1fb80682002ac85a72fa6abef459a4c44f4ab97
2017-07-10 12:39:06 +00:00
|
|
|
if signum is signal.SIGINT:
|
|
|
|
self.clck.stop()
|
|
|
|
|
|
|
|
if __name__ == '__main__':
|
|
|
|
app = Application()
|
|
|
|
app.run()
|