901 lines
29 KiB
C
901 lines
29 KiB
C
/************************************************************************************
|
|
* arch/mips/src/pic32mx/pic32mx-config.h
|
|
*
|
|
* Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
|
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
************************************************************************************/
|
|
|
|
#ifndef __ARCH_MIPS_SRC_PIC32MX_PIC32MX_PIC32_H
|
|
#define __ARCH_MIPS_SRC_PIC32MX_PIC32MX_PIC32_H
|
|
|
|
/************************************************************************************
|
|
* Included Files
|
|
************************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
#include <arch/board/board.h>
|
|
|
|
#include "chip.h"
|
|
#include "pic32mx-memorymap.h"
|
|
#include "pic32mx-uart.h"
|
|
#include "pic32mx-int.h"
|
|
#include "pic32mx-devcfg.h"
|
|
|
|
/************************************************************************************
|
|
* Pre-processor Definitions
|
|
************************************************************************************/
|
|
/* Interrupt Priorities *************************************************************/
|
|
|
|
#ifndef CONFIG_PIC32MX_CTPRIO /* Core Timer Interrupt */
|
|
# define CONFIG_PIC32MX_CTPRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_CTPRIO < 4
|
|
# error "CONFIG_PIC32MX_CTPRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_CTPRIO > 31
|
|
# error "CONFIG_PIC32MX_CTPRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_CS0PRIO /* Core Software Interrupt 0 */
|
|
# define CONFIG_PIC32MX_CS0PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_CS0PRIO < 4
|
|
# error "CONFIG_PIC32MX_CS0PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_CS0PRIO > 31
|
|
# error "CONFIG_PIC32MX_CS0PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_CS1PRIO /* Core Software Interrupt 1 */
|
|
# define CONFIG_PIC32MX_CS1PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_CS1PRIO < 4
|
|
# error "CONFIG_PIC32MX_CS1PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_CS1PRIO > 31
|
|
# error "CONFIG_PIC32MX_CS1PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_INT0PRIO /* External interrupt 0 */
|
|
# define CONFIG_PIC32MX_INT0PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_INT0PRIO < 4
|
|
# error "CONFIG_PIC32MX_INT0PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_INT0PRIO > 31
|
|
# error "CONFIG_PIC32MX_INT0PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_INT1PRIO /* External interrupt 1 */
|
|
# define CONFIG_PIC32MX_INT1PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_INT1PRIO < 4
|
|
# error "CONFIG_PIC32MX_INT1PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_INT1PRIO > 31
|
|
# error "CONFIG_PIC32MX_INT1PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_INT2PRIO /* External interrupt 2 */
|
|
# define CONFIG_PIC32MX_INT2PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_INT2PRIO < 4
|
|
# error "CONFIG_PIC32MX_INT2PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_INT2PRIO > 31
|
|
# error "CONFIG_PIC32MX_INT2PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_INT3PRIO /* External interrupt 3 */
|
|
# define CONFIG_PIC32MX_INT3PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_INT3PRIO < 4
|
|
# error "CONFIG_PIC32MX_INT3PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_INT3PRIO > 31
|
|
# error "CONFIG_PIC32MX_INT3PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_INT4PRIO /* External interrupt 4 */
|
|
# define CONFIG_PIC32MX_INT4PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_INT4PRIO < 4
|
|
# error "CONFIG_PIC32MX_INT4PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_INT4PRIO > 31
|
|
# error "CONFIG_PIC32MX_INT4PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_FSCMPRIO /* Fail-Safe Clock Monitor */
|
|
# define CONFIG_PIC32MX_FSCMPRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_FSCMPRIO < 4
|
|
# error "CONFIG_PIC32MX_FSCMPRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_FSCMPRIO > 31
|
|
# error "CONFIG_PIC32MX_FSCMPRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_T1PRIO /* Timer 1 (System timer) priority */
|
|
# define CONFIG_PIC32MX_T1PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_T1PRIO < 4
|
|
# error "CONFIG_PIC32MX_T1PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_T1PRIO > 31
|
|
# error "CONFIG_PIC32MX_T1PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_T2PRIO /* Timer 2 priority */
|
|
# define CONFIG_PIC32MX_T2PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_T2PRIO < 4
|
|
# error "CONFIG_PIC32MX_T2PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_T2PRIO > 31
|
|
# error "CONFIG_PIC32MX_T2PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_T3PRIO /* Timer 3 priority */
|
|
# define CONFIG_PIC32MX_T3PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_T3PRIO < 4
|
|
# error "CONFIG_PIC32MX_T3PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_T3PRIO > 31
|
|
# error "CONFIG_PIC32MX_T3PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_T4PRIO /* Timer 4 priority */
|
|
# define CONFIG_PIC32MX_T4PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_T4PRIO < 4
|
|
# error "CONFIG_PIC32MX_T4PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_T4PRIO > 31
|
|
# error "CONFIG_PIC32MX_T4PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_T5PRIO /* Timer 5 priority */
|
|
# define CONFIG_PIC32MX_T5PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_T5PRIO < 4
|
|
# error "CONFIG_PIC32MX_T5PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_T5PRIO > 31
|
|
# error "CONFIG_PIC32MX_T5PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_IC1PRIO /* Input Capture 1 */
|
|
# define CONFIG_PIC32MX_IC1PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_IC1PRIO < 4
|
|
# error "CONFIG_PIC32MX_IC1PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_IC1PRIO > 31
|
|
# error "CONFIG_PIC32MX_IC1PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_IC2PRIO /* Input Capture 2 */
|
|
# define CONFIG_PIC32MX_IC2PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_IC2PRIO < 4
|
|
# error "CONFIG_PIC32MX_IC2PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_IC2PRIO > 31
|
|
# error "CONFIG_PIC32MX_IC2PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_IC3PRIO /* Input Capture 3 */
|
|
# define CONFIG_PIC32MX_IC3PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_IC3PRIO < 4
|
|
# error "CONFIG_PIC32MX_IC3PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_IC3PRIO > 31
|
|
# error "CONFIG_PIC32MX_IC3PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_IC4PRIO /* Input Capture 4 */
|
|
# define CONFIG_PIC32MX_IC4PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_IC4PRIO < 4
|
|
# error "CONFIG_PIC32MX_IC4PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_IC4PRIO > 31
|
|
# error "CONFIG_PIC32MX_IC4PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_IC5PRIO /* Input Capture 5 */
|
|
# define CONFIG_PIC32MX_IC5PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_IC5PRIO < 4
|
|
# error "CONFIG_PIC32MX_IC5PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_IC5PRIO > 31
|
|
# error "CONFIG_PIC32MX_IC5PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_OC1PRIO /* Output Compare 1 */
|
|
# define CONFIG_PIC32MX_OC1PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_OC1PRIO < 4
|
|
# error "CONFIG_PIC32MX_OC1PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_OC1PRIO > 31
|
|
# error "CONFIG_PIC32MX_OC1PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_OC2PRIO /* Output Compare 2 */
|
|
# define CONFIG_PIC32MX_OC2PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_OC2PRIO < 4
|
|
# error "CONFIG_PIC32MX_OC2PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_OC2PRIO > 31
|
|
# error "CONFIG_PIC32MX_OC2PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_OC3PRIO /* Output Compare 3 */
|
|
# define CONFIG_PIC32MX_OC3PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_OC3PRIO < 4
|
|
# error "CONFIG_PIC32MX_OC3PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_OC3PRIO > 31
|
|
# error "CONFIG_PIC32MX_OC3PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_OC4PRIO /* Output Compare 4 */
|
|
# define CONFIG_PIC32MX_OC4PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_OC4PRIO < 4
|
|
# error "CONFIG_PIC32MX_OC4PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_OC4PRIO > 31
|
|
# error "CONFIG_PIC32MX_OC4PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_OC5PRIO /* Output Compare 5 */
|
|
# define CONFIG_PIC32MX_OC5PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_OC5PRIO < 4
|
|
# error "CONFIG_PIC32MX_OC5PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_OC5PRIO > 31
|
|
# error "CONFIG_PIC32MX_OC5PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_I2C1PRIO /* I2C 1 */
|
|
# define CONFIG_PIC32MX_I2C1PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_I2C1PRIO < 4
|
|
# error "CONFIG_PIC32MX_I2C1PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_I2C1PRIO > 31
|
|
# error "CONFIG_PIC32MX_I2C1PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_I2C2PRIO /* I2C 2 */
|
|
# define CONFIG_PIC32MX_I2C2PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_I2C2PRIO < 4
|
|
# error "CONFIG_PIC32MX_I2C2PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_I2C2PRIO > 31
|
|
# error "CONFIG_PIC32MX_I2C2PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_SPI1PRIO /* SPI 1 */
|
|
# define CONFIG_PIC32MX_SPI1PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_SPI1PRIO < 4
|
|
# error "CONFIG_PIC32MX_SPI1PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_SPI1PRIO > 31
|
|
# error "CONFIG_PIC32MX_SPI1PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_SPI2PRIO /* SPI 2 */
|
|
# define CONFIG_PIC32MX_SPI2PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_SPI2PRIO < 4
|
|
# error "CONFIG_PIC32MX_SPI2PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_SPI2PRIO > 31
|
|
# error "CONFIG_PIC32MX_SPI2PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_UART1PRIO /* UART 1 */
|
|
# define CONFIG_PIC32MX_UART1PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_UART1PRIO < 4
|
|
# error "CONFIG_PIC32MX_UART1PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_UART1PRIO > 31
|
|
# error "CONFIG_PIC32MX_UART1PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_UART2PRIO /* UART 2 */
|
|
# define CONFIG_PIC32MX_UART2PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_UART2PRIO < 4
|
|
# error "CONFIG_PIC32MX_UART2PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_UART2PRIO > 31
|
|
# error "CONFIG_PIC32MX_UART2PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_CNPRIO /* Input Change Interrupt */
|
|
# define CONFIG_PIC32MX_CNPRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_CNPRIO < 4
|
|
# error "CONFIG_PIC32MX_CNPRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_CNPRIO > 31
|
|
# error "CONFIG_PIC32MX_CNPRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_ADCPRIO /* ADC1 Convert Done */
|
|
# define CONFIG_PIC32MX_ADCPRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_ADCPRIO < 4
|
|
# error "CONFIG_PIC32MX_ADCPRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_ADCPRIO > 31
|
|
# error "CONFIG_PIC32MX_ADCPRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_PMPPRIO /* Parallel Master Port */
|
|
# define CONFIG_PIC32MX_PMPPRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_PMPPRIO < 4
|
|
# error "CONFIG_PIC32MX_PMPPRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_PMPPRIO > 31
|
|
# error "CONFIG_PIC32MX_PMPPRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_CM1PRIO /* Comparator 1 */
|
|
# define CONFIG_PIC32MX_CM1PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_CM1PRIO < 4
|
|
# error "CONFIG_PIC32MX_CM1PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_CM1PRIO > 31
|
|
# error "CONFIG_PIC32MX_CM1PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_CM2PRIO /* Comparator 2 */
|
|
# define CONFIG_PIC32MX_CM2PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_CM2PRIO < 4
|
|
# error "CONFIG_PIC32MX_CM2PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_CM2PRIO > 31
|
|
# error "CONFIG_PIC32MX_CM2PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_FSCMPRIO /* Fail-Safe Clock Monitor */
|
|
# define CONFIG_PIC32MX_FSCMPRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_FSCMPRIO < 4
|
|
# error "CONFIG_PIC32MX_FSCMPRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_FSCMPRIO > 31
|
|
# error "CONFIG_PIC32MX_FSCMPRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_RTCCPRIO /* Real-Time Clock and Calendar */
|
|
# define CONFIG_PIC32MX_RTCCPRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_RTCCPRIO < 4
|
|
# error "CONFIG_PIC32MX_RTCCPRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_RTCCPRIO > 31
|
|
# error "CONFIG_PIC32MX_RTCCPRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_DMA0PRIO /* DMA Channel 0 */
|
|
# define CONFIG_PIC32MX_DMA0PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_DMA0PRIO < 4
|
|
# error "CONFIG_PIC32MX_DMA0PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_DMA0PRIO > 31
|
|
# error "CONFIG_PIC32MX_DMA0PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_DMA1PRIO /* DMA Channel 1 */
|
|
# define CONFIG_PIC32MX_DMA1PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_DMA1PRIO < 4
|
|
# error "CONFIG_PIC32MX_DMA1PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_DMA1PRIO > 31
|
|
# error "CONFIG_PIC32MX_DMA1PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_DMA2PRIO /* DMA Channel 2 */
|
|
# define CONFIG_PIC32MX_DMA2PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_DMA2PRIO < 4
|
|
# error "CONFIG_PIC32MX_DMA2PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_DMA2PRIO > 31
|
|
# error "CONFIG_PIC32MX_DMA2PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_DMA3PRIO /* DMA Channel 3 */
|
|
# define CONFIG_PIC32MX_DMA3PRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_DMA3PRIO < 4
|
|
# error "CONFIG_PIC32MX_DMA3PRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_DMA3PRIO > 31
|
|
# error "CONFIG_PIC32MX_DMA3PRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_FCEPRIO /* Flash Control Event */
|
|
# define CONFIG_PIC32MX_FCEPRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_FCEPRIO < 4
|
|
# error "CONFIG_PIC32MX_FCEPRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_FCEPRIO > 31
|
|
# error "CONFIG_PIC32MX_FCEPRIO is too large"
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_USBPRIO /* USB */
|
|
# define CONFIG_PIC32MX_USBPRIO (INT_IPC_MID_PRIORITY << 2)
|
|
#endif
|
|
#if CONFIG_PIC32MX_USBPRIO < 4
|
|
# error "CONFIG_PIC32MX_USBPRIO is too small"
|
|
#endif
|
|
#if CONFIG_PIC32MX_USBPRIO > 31
|
|
# error "CONFIG_PIC32MX_USBPRIO is too large"
|
|
#endif
|
|
|
|
/* SYS calls ************************************************************************/
|
|
/* SYS call 0 and 1 are defined for internal use by the PIC32MX port (see
|
|
* arch/mips/include/mips32/syscall.h
|
|
*/
|
|
|
|
#ifdef CONFIG_NUTTX_KERNEL
|
|
# if !defined(CONFIG_SYS_RESERVED) || CONFIG_SYS_RESERVED < 2
|
|
# error "CONFIG_SYS_RESERVED must be defined to be 2 for a kernel build"
|
|
# elif CONFIG_SYS_RESERVED > 2
|
|
# warning "CONFIG_SYS_RESERVED should be defined to be 2 for a kernel build"
|
|
# endif
|
|
#endif
|
|
|
|
/* UARTs ****************************************************************************/
|
|
/* Don't enable UARTs not supported by the chip. */
|
|
|
|
#if CHIP_NUARTS < 1
|
|
# undef CONFIG_PIC32MX_UART1
|
|
# undef CONFIG_PIC32MX_UART2
|
|
# undef CONFIG_PIC32MX_UART3
|
|
# undef CONFIG_PIC32MX_UART4
|
|
# undef CONFIG_PIC32MX_UART5
|
|
# undef CONFIG_PIC32MX_UART6
|
|
#elif CHIP_NUARTS < 2
|
|
# undef CONFIG_PIC32MX_UART2
|
|
# undef CONFIG_PIC32MX_UART3
|
|
# undef CONFIG_PIC32MX_UART4
|
|
# undef CONFIG_PIC32MX_UART5
|
|
# undef CONFIG_PIC32MX_UART6
|
|
#elif CHIP_NUARTS < 3
|
|
# undef CONFIG_PIC32MX_UART3
|
|
# undef CONFIG_PIC32MX_UART4
|
|
# undef CONFIG_PIC32MX_UART5
|
|
# undef CONFIG_PIC32MX_UART6
|
|
#elif CHIP_NUARTS < 4
|
|
# undef CONFIG_PIC32MX_UART4
|
|
# undef CONFIG_PIC32MX_UART5
|
|
# undef CONFIG_PIC32MX_UART6
|
|
#elif CHIP_NUARTS < 5
|
|
# undef CONFIG_PIC32MX_UART5
|
|
# undef CONFIG_PIC32MX_UART6
|
|
#elif CHIP_NUARTS < 6
|
|
# undef CONFIG_PIC32MX_UART6
|
|
#endif
|
|
|
|
/* Are any UARTs enabled? */
|
|
|
|
#undef HAVE_UART_DEVICE
|
|
#if defined(CONFIG_PIC32MX_UART1) || defined(CONFIG_PIC32MX_UART2) || \
|
|
defined(CONFIG_PIC32MX_UART4) || defined(CONFIG_PIC32MX_UART4) || \
|
|
defined(CONFIG_PIC32MX_UART5) || defined(CONFIG_PIC32MX_UART6)
|
|
# define HAVE_UART_DEVICE 1
|
|
#endif
|
|
|
|
/* Is there a serial console? There should be no more than one defined. It
|
|
* could be on any UARTn, n=1,.. CHIP_NUARTS
|
|
*/
|
|
|
|
#if defined(CONFIG_UART1_SERIAL_CONSOLE) && defined(CONFIG_PIC32MX_UART1)
|
|
# undef CONFIG_UART2_SERIAL_CONSOLE
|
|
# undef CONFIG_UART3_SERIAL_CONSOLE
|
|
# undef CONFIG_UART4_SERIAL_CONSOLE
|
|
# undef CONFIG_UART5_SERIAL_CONSOLE
|
|
# undef CONFIG_UART6_SERIAL_CONSOLE
|
|
# define HAVE_SERIAL_CONSOLE 1
|
|
#elif defined(CONFIG_UART2_SERIAL_CONSOLE) && defined(CONFIG_PIC32MX_UART2)
|
|
# undef CONFIG_UART1_SERIAL_CONSOLE
|
|
# undef CONFIG_UART3_SERIAL_CONSOLE
|
|
# undef CONFIG_UART4_SERIAL_CONSOLE
|
|
# undef CONFIG_UART5_SERIAL_CONSOLE
|
|
# undef CONFIG_UART6_SERIAL_CONSOLE
|
|
# define HAVE_SERIAL_CONSOLE 1
|
|
#elif defined(CONFIG_UART3_SERIAL_CONSOLE) && defined(CONFIG_PIC32MX_UART3)
|
|
# undef CONFIG_UART1_SERIAL_CONSOLE
|
|
# undef CONFIG_UART2_SERIAL_CONSOLE
|
|
# undef CONFIG_UART4_SERIAL_CONSOLE
|
|
# undef CONFIG_UART5_SERIAL_CONSOLE
|
|
# undef CONFIG_UART6_SERIAL_CONSOLE
|
|
# define HAVE_SERIAL_CONSOLE 1
|
|
#elif defined(CONFIG_UART4_SERIAL_CONSOLE) && defined(CONFIG_PIC32MX_UART4)
|
|
# undef CONFIG_UART1_SERIAL_CONSOLE
|
|
# undef CONFIG_UART2_SERIAL_CONSOLE
|
|
# undef CONFIG_UART3_SERIAL_CONSOLE
|
|
# undef CONFIG_UART5_SERIAL_CONSOLE
|
|
# undef CONFIG_UART6_SERIAL_CONSOLE
|
|
# define HAVE_SERIAL_CONSOLE 1
|
|
#elif defined(CONFIG_UART5_SERIAL_CONSOLE) && defined(CONFIG_PIC32MX_UART5)
|
|
# undef CONFIG_UART1_SERIAL_CONSOLE
|
|
# undef CONFIG_UART2_SERIAL_CONSOLE
|
|
# undef CONFIG_UART3_SERIAL_CONSOLE
|
|
# undef CONFIG_UART4_SERIAL_CONSOLE
|
|
# undef CONFIG_UART6_SERIAL_CONSOLE
|
|
# define HAVE_SERIAL_CONSOLE 1
|
|
#elif defined(CONFIG_UART6_SERIAL_CONSOLE) && defined(CONFIG_PIC32MX_UART6)
|
|
# undef CONFIG_UART1_SERIAL_CONSOLE
|
|
# undef CONFIG_UART2_SERIAL_CONSOLE
|
|
# undef CONFIG_UART3_SERIAL_CONSOLE
|
|
# undef CONFIG_UART4_SERIAL_CONSOLE
|
|
# undef CONFIG_UART5_SERIAL_CONSOLE
|
|
# define HAVE_SERIAL_CONSOLE 1
|
|
#else
|
|
# undef CONFIG_UART1_SERIAL_CONSOLE
|
|
# undef CONFIG_UART2_SERIAL_CONSOLE
|
|
# undef CONFIG_UART3_SERIAL_CONSOLE
|
|
# undef CONFIG_UART4_SERIAL_CONSOLE
|
|
# undef CONFIG_UART5_SERIAL_CONSOLE
|
|
# undef CONFIG_UART6_SERIAL_CONSOLE
|
|
# undef HAVE_SERIAL_CONSOLE
|
|
#endif
|
|
|
|
/* Device Configuration *************************************************************/
|
|
/* DEVCFG3 */
|
|
|
|
#ifndef CONFIG_PIC32MX_USERID /* User ID */
|
|
# define CONFIG_PIC32MX_USERID 0x584e /* "NutX" */
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_PMDL1WAY /* Peripheral module disable configuration */
|
|
# define CONFIG_PIC32MX_PMDL1WAY 0
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_IOL1WAY /* Peripheral pin select configuration */
|
|
# define CONFIG_PIC32MX_IOL1WAY 0
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_SRSSEL /* Shadow register interrupt priority */
|
|
# define CONFIG_PIC32MX_SRSSEL INT_IPC_MIN_PRIORITY
|
|
#endif
|
|
|
|
/* Unless overridden in the .config file, all pins are in the default setting */
|
|
|
|
#ifndef CONFIG_PIC32MX_FMIIEN /* Ethernet MII enable: 0=RMII 1=MII */
|
|
# define CONFIG_PIC32MX_FMIIEN 1 /* MII enabled */
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_FETHIO /* Ethernet I/O Pins 0=alternate 1=default */
|
|
# define CONFIG_PIC32MX_FETHIO 1 /* Default Ethernet I/O Pins */
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_FCANIO /* SCM1 pin C selection */
|
|
# define CONFIG_PIC32MX_FCANIO 1 /* Default CAN I/O Pins */
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_FSCM1IO /* SCM1 pin C selection */
|
|
# define CONFIG_PIC32MX_FSCM1IO 1 /* Default pin for SCM1C */
|
|
#endif
|
|
|
|
/* USB or Ports? */
|
|
|
|
#ifdef CONFIG_PIC32MX_USB
|
|
# ifndef CONFIG_PIC32MX_USBIDO /* USB USBID Selection */
|
|
# define CONFIG_PIC32MX_USBIDO 1 /* USBID pin is controlled by the USB module */
|
|
# endif
|
|
# ifndef CONFIG_PIC32MX_VBUSIO /* USB VBUSON Selection */
|
|
# define CONFIG_PIC32MX_VBUSIO 1 /* VBUSON pin is controlled by the USB module */
|
|
# endif
|
|
#else
|
|
# ifndef CONFIG_PIC32MX_USBIDO /* USB USBID Selection */
|
|
# define CONFIG_PIC32MX_USBIDO 0 /* USBID pin is controlled by the Port function */
|
|
# endif
|
|
# ifndef CONFIG_PIC32MX_VBUSIO /* USB VBUSON Selection */
|
|
# define CONFIG_PIC32MX_VBUSIO 0 /* VBUSON pin is controlled by the Port function */
|
|
# endif
|
|
#endif
|
|
|
|
/* DEVCFG2 */
|
|
|
|
#undef CONFIG_PIC32MX_PLLIDIV
|
|
#if BOARD_PLL_IDIV == 1
|
|
# define CONFIG_PIC32MX_PLLIDIV DEVCFG2_FPLLIDIV_DIV1
|
|
#elif BOARD_PLL_IDIV == 2
|
|
# define CONFIG_PIC32MX_PLLIDIV DEVCFG2_FPLLIDIV_DIV2
|
|
#elif BOARD_PLL_IDIV == 3
|
|
# define CONFIG_PIC32MX_PLLIDIV DEVCFG2_FPLLIDIV_DIV3
|
|
#elif BOARD_PLL_IDIV == 4
|
|
# define CONFIG_PIC32MX_PLLIDIV DEVCFG2_FPLLIDIV_DIV4
|
|
#elif BOARD_PLL_IDIV == 5
|
|
# define CONFIG_PIC32MX_PLLIDIV DEVCFG2_FPLLIDIV_DIV5
|
|
#elif BOARD_PLL_IDIV == 6
|
|
# define CONFIG_PIC32MX_PLLIDIV DEVCFG2_FPLLIDIV_DIV6
|
|
#elif BOARD_PLL_IDIV == 10
|
|
# define CONFIG_PIC32MX_PLLIDIV DEVCFG2_FPLLIDIV_DIV10
|
|
#elif BOARD_PLL_IDIV == 12
|
|
# define CONFIG_PIC32MX_PLLIDIV DEVCFG2_FPLLIDIV_DIV12
|
|
#else
|
|
# error "Unsupported BOARD_PLL_IDIV"
|
|
#endif
|
|
|
|
#undef CONFIG_PIC32MX_PLLMULT
|
|
#if BOARD_PLL_MULT == 15
|
|
# define CONFIG_PIC32MX_PLLMULT DEVCFG2_FPLLMULT_MUL15
|
|
#elif BOARD_PLL_MULT == 16
|
|
# define CONFIG_PIC32MX_PLLMULT DEVCFG2_FPLLMULT_MUL16
|
|
#elif BOARD_PLL_MULT == 17
|
|
# define CONFIG_PIC32MX_PLLMULT DEVCFG2_FPLLMULT_MUL17
|
|
#elif BOARD_PLL_MULT == 18
|
|
# define CONFIG_PIC32MX_PLLMULT DEVCFG2_FPLLMULT_MUL18
|
|
#elif BOARD_PLL_MULT == 19
|
|
# define CONFIG_PIC32MX_PLLMULT DEVCFG2_FPLLMULT_MUL19
|
|
#elif BOARD_PLL_MULT == 20
|
|
# define CONFIG_PIC32MX_PLLMULT DEVCFG2_FPLLMULT_MUL20
|
|
#elif BOARD_PLL_MULT == 21
|
|
# define CONFIG_PIC32MX_PLLMULT DEVCFG2_FPLLMULT_MUL21
|
|
#elif BOARD_PLL_MULT == 24
|
|
# define CONFIG_PIC32MX_PLLMULT DEVCFG2_FPLLMULT_MUL24
|
|
#else
|
|
# error "Unsupported BOARD_PLL_MULT"
|
|
#endif
|
|
|
|
#undef CONFIG_PIC32MX_UPLLIDIV
|
|
#if BOARD_UPLL_IDIV == 1
|
|
# define CONFIG_PIC32MX_UPLLIDIV DEVCFG2_FUPLLIDIV_DIV1
|
|
#elif BOARD_UPLL_IDIV == 2
|
|
# define CONFIG_PIC32MX_UPLLIDIV DEVCFG2_FUPLLIDIV_DIV2
|
|
#elif BOARD_UPLL_IDIV == 3
|
|
# define CONFIG_PIC32MX_UPLLIDIV DEVCFG2_FUPLLIDIV_DIV3
|
|
#elif BOARD_UPLL_IDIV == 4
|
|
# define CONFIG_PIC32MX_UPLLIDIV DEVCFG2_FUPLLIDIV_DIV4
|
|
#elif BOARD_UPLL_IDIV == 5
|
|
# define CONFIG_PIC32MX_UPLLIDIV DEVCFG2_FUPLLIDIV_DIV5
|
|
#elif BOARD_UPLL_IDIV == 6
|
|
# define CONFIG_PIC32MX_UPLLIDIV DEVCFG2_FUPLLIDIV_DIV6
|
|
#elif BOARD_UPLL_IDIV == 10
|
|
# define CONFIG_PIC32MX_UPLLIDIV DEVCFG2_FUPLLIDIV_DIV10
|
|
#elif BOARD_UPLL_IDIV == 12
|
|
# define CONFIG_PIC32MX_UPLLIDIV DEVCFG2_FUPLLIDIV_DIV12
|
|
#else
|
|
# error "Unsupported BOARD_UPLL_IDIV"
|
|
#endif
|
|
|
|
#undef CONFIG_PIC32MX_PLLODIV
|
|
#if BOARD_PLL_ODIV == 1
|
|
# define CONFIG_PIC32MX_PLLODIV DEVCFG2_FPLLODIV_DIV1
|
|
#elif BOARD_PLL_ODIV == 2
|
|
# define CONFIG_PIC32MX_PLLODIV DEVCFG2_FPLLODIV_DIV2
|
|
#elif BOARD_PLL_ODIV == 4
|
|
# define CONFIG_PIC32MX_PLLODIV DEVCFG2_FPLLODIV_DIV2
|
|
#elif BOARD_PLL_ODIV == 8
|
|
# define CONFIG_PIC32MX_PLLODIV DEVCFG2_FPLLODIV_DIV2
|
|
#elif BOARD_PLL_ODIV == 16
|
|
# define CONFIG_PIC32MX_PLLODIV DEVCFG2_FPLLODIV_DIV2
|
|
#elif BOARD_PLL_ODIV == 32
|
|
# define CONFIG_PIC32MX_PLLODIV DEVCFG2_FPLLODIV_DIV2
|
|
#elif BOARD_PLL_ODIV == 64
|
|
# define CONFIG_PIC32MX_PLLODIV DEVCFG2_FPLLODIV_DIV2
|
|
#elif BOARD_PLL_ODIV == 128
|
|
# define CONFIG_PIC32MX_PLLODIV DEVCFG2_FPLLODIV_DIV2
|
|
#else
|
|
# error "Unsupported BOARD_PLL_ODIV"
|
|
#endif
|
|
|
|
/* DEVCFG1 */
|
|
|
|
#ifdef BOARD_SOSC_ENABLE
|
|
# define CONFIG_PIC32MX_FSOSCEN DEVCFG1_FSOSCEN
|
|
#else
|
|
# define CONFIG_PIC32MX_FSOSCEN 0
|
|
#endif
|
|
|
|
#ifdef BOARD_SOSC_IESO
|
|
# define CONFIG_PIC32MX_IESO DEVCFG1_IESO
|
|
#else
|
|
# define CONFIG_PIC32MX_IESO 0
|
|
#endif
|
|
|
|
#undef CONFIG_PIC32MX_PBDIV
|
|
#if BOARD_PBDIV == 1
|
|
# define CONFIG_PIC32MX_PBDIV DEVCFG1_FPBDIV_DIV1
|
|
#elif BOARD_PBDIV == 2
|
|
# define CONFIG_PIC32MX_PBDIV DEVCFG1_FPBDIV_DIV2
|
|
#elif BOARD_PBDIV == 4
|
|
# define CONFIG_PIC32MX_PBDIV DEVCFG1_FPBDIV_DIV4
|
|
#elif BOARD_PBDIV == 8
|
|
# define CONFIG_PIC32MX_PBDIV DEVCFG1_FPBDIV_DIV8
|
|
#else
|
|
# error "Unsupported BOARD_PBDIV"
|
|
#endif
|
|
|
|
#undef CONFIG_PIC32MX_POSCMOD
|
|
#if defined(BOARD_POSC_ECMODE)
|
|
# define CONFIG_PIC32MX_POSCMOD DEVCFG1_POSCMOD_EC
|
|
#elif defined(BOARD_POSC_XTMODE)
|
|
# define CONFIG_PIC32MX_POSCMOD DEVCFG1_POSCMOD_XT
|
|
#elif defined(BOARD_POSC_HSMODE)
|
|
# define CONFIG_PIC32MX_POSCMOD DEVCFG1_POSCMOD_HS
|
|
#elif defined(BOARD_POSC_DISABLED)
|
|
# define CONFIG_PIC32MX_POSCMOD DEVCFG1_POSCMOD_DIS
|
|
#else
|
|
# error "Unknown board POSC mode"
|
|
#endif
|
|
|
|
#undef CONFIG_PIC32MX_FNOSC
|
|
#if defined(BOARD_FNOSC_FRC)
|
|
# define CONFIG_PIC32MX_FNOSC DEVCFG1_FNOSC_FRC
|
|
#elif defined(BOARD_FNOSC_FRCPLL)
|
|
# define CONFIG_PIC32MX_FNOSC DEVCFG1_FNOSC_FRCPLL
|
|
#elif defined(BOARD_FNOSC_POSC)
|
|
# define CONFIG_PIC32MX_FNOSC DEVCFG1_FNOSC_POSC
|
|
#elif defined(BOARD_FNOSC_POSCPLL)
|
|
# define CONFIG_PIC32MX_FNOSC DEVCFG1_FNOSC_POSCPLL
|
|
#elif defined(BOARD_FNOSC_SOSC)
|
|
# define CONFIG_PIC32MX_FNOSC DEVCFG1_FNOSC_SOSC
|
|
#elif defined(BOARD_FNOSC_LPRC)
|
|
# define CONFIG_PIC32MX_FNOSC DEVCFG1_FNOSC_LPRC
|
|
#elif defined(BOARD_FNOSC_FRCDIV)
|
|
# define CONFIG_PIC32MX_FNOSC DEVCFG1_FNOSC_FRCDIV
|
|
#else
|
|
# error "Unknown board FNOSC selection"
|
|
#endif
|
|
|
|
#undef CONFIG_PIC32MX_FCKSM
|
|
#if defined(BOARD_POSC_SWITCH)
|
|
# if defined(BOARD_POSC_FSCM)
|
|
# define CONFIG_PIC32MX_FCKSM DEVCFG1_FCKSM_BOTH
|
|
# else
|
|
# define CONFIG_PIC32MX_FCKSM DEVCFG1_FCKSM_CSONLY
|
|
# endif
|
|
#else
|
|
# define CONFIG_PIC32MX_FCKSM DEVCFG1_FCKSM_NONE
|
|
#endif
|
|
|
|
#undef CONFIG_PIC32MX_WDPS
|
|
#if BOARD_WD_PRESCALER == 1
|
|
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_1
|
|
#elif BOARD_WD_PRESCALER == 2
|
|
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_2
|
|
#elif BOARD_WD_PRESCALER == 4
|
|
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_4
|
|
#elif BOARD_WD_PRESCALER == 8
|
|
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_8
|
|
#elif BOARD_WD_PRESCALER == 16
|
|
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_16
|
|
#elif BOARD_WD_PRESCALER == 32
|
|
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_32
|
|
#elif BOARD_WD_PRESCALER == 64
|
|
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_64
|
|
#elif BOARD_WD_PRESCALER == 128
|
|
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_128
|
|
#elif BOARD_WD_PRESCALER == 256
|
|
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_256
|
|
#elif BOARD_WD_PRESCALER == 512
|
|
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_512
|
|
#elif BOARD_WD_PRESCALER == 1024
|
|
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_1024
|
|
#elif BOARD_WD_PRESCALER == 2048
|
|
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_2048
|
|
#elif BOARD_WD_PRESCALER == 4096
|
|
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_4096
|
|
#elif BOARD_WD_PRESCALER == 8192
|
|
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_8192
|
|
#elif BOARD_WD_PRESCALER == 16384
|
|
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_16384
|
|
#elif BOARD_WD_PRESCALER == 32768
|
|
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_32768
|
|
#elif BOARD_WD_PRESCALER == 65536
|
|
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_65536
|
|
#elif BOARD_WD_PRESCALER == 131072
|
|
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_131072
|
|
#elif BOARD_WD_PRESCALER == 262144
|
|
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_262144
|
|
#elif BOARD_WD_PRESCALER == 524288
|
|
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_524288
|
|
#elif BOARD_WD_PRESCALER == 1048576
|
|
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_1048576
|
|
#else
|
|
# error "Unsupported BOARD_WD_PRESCALER"
|
|
#endif
|
|
|
|
#undef CONFIG_PIC32MX_WDENABLE
|
|
#if BOARD_WD_ENABLE
|
|
# define CONFIG_PIC32MX_WDENABLE DEVCFG1_FWDTEN
|
|
#else
|
|
# define CONFIG_PIC32MX_WDENABLE 0
|
|
#endif
|
|
|
|
/* DEVCFG0 */
|
|
|
|
#ifndef CONFIG_PIC32MX_DEBUGGER /* Background Debugger Enable */
|
|
# define CONFIG_PIC32MX_DEBUGGER 3 /* disabled */
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_ICESEL /* In-Circuit Emulator/Debugger Communication Channel Select */
|
|
# define CONFIG_PIC32MX_ICESEL 1 /* default */
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_PROGFLASHWP /* Program FLASH write protect */
|
|
# define CONFIG_PIC32MX_PROGFLASHWP 0xff /* Disabled */
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_BOOTFLASHWP
|
|
# define CONFIG_PIC32MX_BOOTFLASHWP 1 /* Disabled */
|
|
#endif
|
|
|
|
#ifndef CONFIG_PIC32MX_CODEWP
|
|
# define CONFIG_PIC32MX_CODEWP 1 /* Disabled */
|
|
#endif
|
|
|
|
/************************************************************************************
|
|
* Public Types
|
|
************************************************************************************/
|
|
|
|
/************************************************************************************
|
|
* Public Data
|
|
************************************************************************************/
|
|
|
|
/************************************************************************************
|
|
* Inline Functions
|
|
************************************************************************************/
|
|
|
|
/************************************************************************************
|
|
* Public Functions
|
|
************************************************************************************/
|
|
|
|
#endif /* __ARCH_MIPS_SRC_PIC32MX_PIC32MX_PIC32_H */
|