phone-side
/
nuttx-bb
9
0
Fork 0
Code Releases Activity
nuttx-bb/nuttx/fs/nxffs/nxffs_reformat.c

268 lines
8.8 KiB
C
Raw Blame History

/****************************************************************************
* fs/nxffs/nxffs_reformat.c
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* References: Linux/Documentation/filesystems/romfs.txt
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <string.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/mtd.h>
#include "nxffs.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/****************************************************************************
* Private Types
****************************************************************************/
/****************************************************************************
* Public Variables
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: nxffs_format
*
* Description:
* Erase and reformat the entire volume.
*
* Input Parameters:
* volume - Describes the NXFFS volume to be reformatted.
*
* Returned Value:
* Zero on success or a negated errno on a failure. Failures will be
* returned n the case of MTD reported failures o.
* Nothing in the volume data itself will generate errors.
*
****************************************************************************/
static int nxffs_format(FAR struct nxffs_volume_s *volume)
{
FAR uint8_t *blkptr; /* Pointer to next block data */
off_t eblock; /* Erase block number */
off_t lblock; /* Logical block number */
ssize_t nxfrd; /* Number of blocks transferred */
int i;
int ret;
/* Create an image of one properly formatted erase sector */
memset(volume->pack, CONFIG_NXFFS_ERASEDSTATE, volume->geo.erasesize);
for (blkptr = volume->pack, i = 0;
i < volume->blkper;
blkptr += volume->geo.blocksize, i++)
{
FAR struct nxffs_block_s *blkhdr = (FAR struct nxffs_block_s*)blkptr;
memcpy(blkhdr->magic, g_blockmagic, NXFFS_MAGICSIZE);
blkhdr->state = BLOCK_STATE_GOOD;
}
/* Erase and format each erase block */
for (eblock = 0; eblock < volume->geo.neraseblocks; eblock++)
{
/* Erase the block */
ret = MTD_ERASE(volume->mtd, eblock, 1);
if (ret < 0)
{
fdbg("Erase block %d failed: %d\n", eblock, ret);
return ret;
}
/* Write the formatted image to the erase block */
lblock = eblock * volume->blkper;
nxfrd = MTD_BWRITE(volume->mtd, lblock, volume->blkper, volume->pack);
if (nxfrd != volume->blkper)
{
fdbg("Write erase block %d failed: %d\n", lblock, nxfrd);
return -EIO;
}
}
return OK;
}
/****************************************************************************
* Name: nxffs_badblocks
*
* Description:
* Verify each block and mark improperly erased blocks as bad.
*
* Input Parameters:
* volume - Describes the NXFFS volume to be reformatted.
*
* Returned Value:
* Zero on success or a negated errno on a failure. Failures will be
* returned n the case of MTD reported failures o.
* Nothing in the volume data itself will generate errors.
*
****************************************************************************/
static int nxffs_badblocks(FAR struct nxffs_volume_s *volume)
{
FAR uint8_t *blkptr; /* Pointer to next block data */
off_t eblock; /* Erase block number */
off_t lblock; /* Logical block number */
ssize_t nxfrd; /* Number of blocks transferred */
bool good; /* TRUE: block is good */
bool modified; /* TRUE: The erase block has been modified */
int i;
/* Read and verify each erase block */
for (eblock = 0; eblock < volume->geo.neraseblocks; eblock++)
{
/* Read the entire erase block */
lblock = eblock * volume->blkper;
nxfrd = MTD_BREAD(volume->mtd, lblock, volume->blkper, volume->pack);
if (nxfrd != volume->blkper)
{
fdbg("Read erase block %d failed: %d\n", lblock, nxfrd);
return -EIO;
}
/* Process each logical block */
modified = false;
for (blkptr = volume->pack, i = 0;
i < volume->blkper;
blkptr += volume->geo.blocksize, i++)
{
FAR struct nxffs_block_s *blkhdr = (FAR struct nxffs_block_s*)blkptr;
/* Check block header */
good = true;
if (memcmp(blkhdr->magic, g_blockmagic, NXFFS_MAGICSIZE) != 0 ||
blkhdr->state != BLOCK_STATE_GOOD)
{
good = false;
}
/* Check that block data is erased */
else
{
size_t blocksize = volume->geo.blocksize - SIZEOF_NXFFS_BLOCK_HDR;
size_t erasesize = nxffs_erased(&blkptr[SIZEOF_NXFFS_BLOCK_HDR], blocksize);
good = (blocksize == erasesize);
}
/* If the block is bad, attempt to re-write the block header indicating
* a bad block (of course, if the block has failed, this may not be
* possible, depending upon failure modes.
*/
if (!good)
{
memcpy(blkhdr->magic, g_blockmagic, NXFFS_MAGICSIZE);
blkhdr->state = BLOCK_STATE_BAD;
modified = true;
}
}
/* If the erase block was modified, then re-write it */
nxfrd = MTD_BWRITE(volume->mtd, lblock, volume->blkper, volume->pack);
if (nxfrd != volume->blkper)
{
fdbg("Write erase block %d failed: %d\n", lblock, nxfrd);
return -EIO;
}
}
return OK;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: nxffs_reformat
*
* Description:
* Erase and reformat the entire volume. Verify each block and mark
* improperly erased blocks as bad.
*
* Input Parameters:
* volume - Describes the NXFFS volume to be reformatted.
*
* Returned Value:
* Zero on success or a negated errno on a failure. Failures will be
* returned n the case of MTD reported failures o.
* Nothing in the volume data itself will generate errors.
*
****************************************************************************/
int nxffs_reformat(FAR struct nxffs_volume_s *volume)
{
int ret;
/* Erase and reformat the entire volume */
ret = nxffs_format(volume);
if (ret < 0)
{
fdbg("Failed to reformat the volume: %d\n", -ret);
return ret;
}
/* Check for bad blocks */
ret = nxffs_badblocks(volume);
if (ret < 0)
{
fdbg("Bad block check failed: %d\n", -ret);
}
return ret;
}
View Git Blame Copy Permalink