# # For a description of the syntax of this configuration file, # see misc/tools/kconfig-language.txt. # choice prompt "STM32 Chip Selection" default ARCH_CHIP_STM32F103ZET6 depends on ARCH_CHIP_STM32 config ARCH_CHIP_STM32F103ZET6 bool "STM32F103ZET6" config ARCH_CHIP_STM32F103RET6 bool "STM32F103RET6" config ARCH_CHIP_STM32F103VCT6 bool "STM32F103VCT6" config ARCH_CHIP_STM32F105VBT7 bool "STM32F105VBT7" config ARCH_CHIP_STM32F107VC bool "STM32F107VC" config ARCH_CHIP_STM32F207IG bool "STM32F207IG" config ARCH_CHIP_STM32F405RG bool "STM32F405RG" config ARCH_CHIP_STM32F405VG bool "STM32F405VG" config ARCH_CHIP_STM32F405ZG bool "STM32F405ZG" config ARCH_CHIP_STM32F407VE bool "STM32F407VE" config ARCH_CHIP_STM32F407VG bool "STM32F407VG" config ARCH_CHIP_STM32F407ZE bool "STM32F407ZE" config ARCH_CHIP_STM32F407ZG bool "STM32F407ZG" config ARCH_CHIP_STM32F407IE bool "STM32F407IE" config ARCH_CHIP_STM32F407IG bool "STM32F407IG" endchoice config STM32_STM32F10XX bool default y if ARCH_CHIP_STM32F103ZET6 || ARCH_CHIP_STM32F103RET6 || ARCH_CHIP_STM32F103VCT6 || ARCH_CHIP_STM32F105VBT7 || ARCH_CHIP_STM32F107VC config STM32_CONNECTIVITYLINE bool default y if ARCH_CHIP_STM32F105VBT7 || ARCH_CHIP_STM32F107VC config STM32_STM32F20XX bool default y if ARCH_CHIP_STM32F207IG config STM32_STM32F40XX bool default y if ARCH_CHIP_STM32F405RG || ARCH_CHIP_STM32F405VG || ARCH_CHIP_STM32F405ZG || ARCH_CHIP_STM32F407VE || ARCH_CHIP_STM32F407VG || ARCH_CHIP_STM32F407ZE || ARCH_CHIP_STM32F407ZG || ARCH_CHIP_STM32F407IE || ARCH_CHIP_STM32F407IE config ARCH_CORTEXM3 bool default y if !STM32_STM32F40XX config ARCH_CORTEXM4 bool default y if STM32_STM32F40XX menu "STM32 Peripheral Support" config STM32_ADC1 bool "ADC1" default n config STM32_ADC2 bool "ADC2" default n config STM32_ADC3 bool "ADC3" default n config STM32_CRC bool "CRC" default n config STM32_DMA1 bool "DMA1" default n config STM32_DMA2 bool "DMA2" default n config STM32_BKP bool "BKP" default n depends on STM32_STM32F10XX config STM32_BKPSRAM bool "BKP RAM" default n depends on STM32_STM32F20XX || STM32_STM32F40XX config STM32_CAN1 bool "CAN1" default n config STM32_CAN2 bool "CAN2" default n depends on STM32_STM32F20XX || STM32_STM32F40XX config STM32_CCMDATARAM bool "CMD/DATA RAM" default n depends on STM32_STM32F40XX config STM32_CRYP bool "CRYP" default n depends on STM32_STM32F20XX || STM32_STM32F40XX config STM32_DAC1 bool "DAC1" default n config STM32_DAC2 bool "DAC2" default n config STM32_DCMI bool "DCMI" default n depends on STM32_STM32F20XX || STM32_STM32F40XX config STM32_ETHMAC bool "Ethernet MAC" default n depends on STM32_STM32F20XX || STM32_STM32F40XX config STM32_FSMC bool "FSMC" default n config STM32_HASH bool "HASH" default n depends on STM32_STM32F20XX || STM32_STM32F40XX config STM32_I2C1 bool "I2C1" default n config STM32_I2C2 bool "I2C2" default n config STM32_I2C3 bool "I2C3" default n depends on STM32_STM32F20XX || STM32_STM32F40XX config STM32_IWDG bool "IWDG" default n config STM32_OTGFS bool "OTG FS" default n depends on STM32_STM32F20XX || STM32_STM32F40XX config STM32_OTGHS bool "OTG HS" default n depends on STM32_STM32F20XX || STM32_STM32F40XX config STM32_PWR bool "PWR" default n config STM32_RNG bool "RNG" default n depends on STM32_STM32F20XX || STM32_STM32F40XX config STM32_SDIO bool "SDIO" default n config STM32_SPI1 bool "SPI1" default n config STM32_SPI2 bool "SPI2" default n config STM32_SPI3 bool "SPI3" default n depends on STM32_STM32F20XX || STM32_STM32F40XX config STM32_SPI4 bool "SPI4" default n depends on STM32_STM32F10XX config STM32_SYSCFG bool "SYSCFG" default n depends on STM32_STM32F20XX || STM32_STM32F40XX config STM32_TIM1 bool "TIM1" default n config STM32_TIM2 bool "TIM2" default n config STM32_TIM3 bool "TIM3" default n config STM32_TIM4 bool "TIM4" default n config STM32_TIM5 bool "TIM5" default n config STM32_TIM6 bool "TIM6" default n config STM32_TIM7 bool "TIM7" default n config STM32_TIM8 bool "TIM8" default n config STM32_TIM9 bool "TIM9" default n depends on STM32_STM32F20XX || STM32_STM32F40XX config STM32_TIM10 bool "TIM10" default n depends on STM32_STM32F20XX || STM32_STM32F40XX config STM32_TIM11 bool "TIM11" default n depends on STM32_STM32F20XX || STM32_STM32F40XX config STM32_TIM12 bool "TIM12" default n depends on STM32_STM32F20XX || STM32_STM32F40XX config STM32_TIM13 bool "TIM13" default n depends on STM32_STM32F20XX || STM32_STM32F40XX config STM32_TIM14 bool "TIM14" default n depends on STM32_STM32F20XX || STM32_STM32F40XX config STM32_USART1 bool "USART1" default n config STM32_USART2 bool "USART2" default n config STM32_USART3 bool "USART3" default n config STM32_UART4 bool "UART4" default n config STM32_UART5 bool "UART5" default n config STM32_USART6 bool "USART6" default n depends on STM32_STM32F20XX || STM32_STM32F40XX config STM32_USB bool "USB Device" default n depends on STM32_STM32F10XX config STM32_WWDG bool "WWDG" default n endmenu config STM32_ADC bool default y if STM32_ADC1 || STM32_ADC2 || STM32_ADC3 config STM32_DAC bool default y if STM32_DAC1 || STM32_ADC2 config STM32_SPI bool default y if STM32_SPI1 || STM32_SPI2 || STM32_SPI3 || STM32_SPI4 config STM32_DMA bool default y if STM32_DMA1 || STM32_DMA2 config STM32_CAN bool default y if STM32_CAN1 || STM32_CAN2 choice prompt "TIM1 Alternate Pin Mappings" depends on STM32_STM32F10XX && STM32_TIM1 default STM32_TIM1_NO_REMAP config STM32_TIM1_NO_REMAP bool "No pin remapping" config STM32_TIM1_FULL_REMAP bool "Full pin remapping" config STM32_TIM1_PARTIAL_REMAP bool "Partial pin remapping" endchoice choice prompt "TIM2 Alternate Pin Mappings" depends on STM32_STM32F10XX && STM32_TIM2 default STM32_TIM2_NO_REMAP config STM32_TIM2_NO_REMAP bool "No pin remapping" config STM32_TIM2_FULL_REMAP bool "Full pin remapping" config STM32_TIM2_PARTIAL_REMAP_1 bool "Partial pin remapping #1" config STM32_TIM2_PARTIAL_REMAP_2 bool "Partial pin remapping #2" endchoice choice prompt "TIM3 Alternate Pin Mappings" depends on STM32_STM32F10XX && STM32_TIM3 default STM32_TIM3_NO_REMAP config STM32_TIM3_NO_REMAP bool "No pin remapping" config STM32_TIM3_FULL_REMAP bool "Full pin remapping" config STM32_TIM3_PARTIAL_REMAP bool "Partial pin remapping" endchoice config STM32_TIM4_REMAP bool "TIM4 Alternate Pin Mapping" default n depends on STM32_STM32F10XX && STM32_TIM4 config STM32_USART1_REMAP bool "USART1 Alternate Pin Mapping" default n depends on STM32_STM32F10XX && STM32_USART1 config STM32_USART2_REMAP bool "USART2 Alternate Pin Mapping" default n depends on STM32_STM32F10XX && STM32_USART2 choice prompt "USART3 Alternate Pin Mappings" depends on STM32_STM32F10XX && STM32_USART3 default STM32_USART3_NO_REMAP config STM32_USART3_NO_REMAP bool "No pin remapping" config STM32_USART3_FULL_REMAP bool "Full pin remapping" config STM32_USART3_PARTIAL_REMAP bool "Partial pin remapping" endchoice config STM32_SPI1_REMAP bool "SPI1 Alternate Pin Mapping" default n depends on STM32_STM32F10XX && STM32_SPI1 config STM32_SPI3_REMAP bool "SPI3 Alternate Pin Mapping" default n depends on STM32_STM32F10XX && STM32_SPI3 config STM32_I2C1_REMAP bool "I2C1 Alternate Pin Mapping" default n depends on STM32_STM32F10XX && STM32_I2C1 choice prompt "CAN1 Alternate Pin Mappings" depends on STM32_STM32F10XX && STM32_CAN1 default STM32_CAN1_NO_REMAP config STM32_CAN1_NO_REMAP bool "No pin remapping" config STM32_CAN1_FULL_REMAP bool "Full pin remapping" config STM32_CAN1_PARTIAL_REMAP bool "Partial pin remapping" endchoice config STM32_CAN2_REMAP bool "CAN2 Alternate Pin Mapping" default n depends on STM32_STM32F10XX && STM32_CAN2 choice prompt "JTAG Configuration" default STM32_JTAG_DISABLE ---help--- JTAG Enable settings (by default JTAG-DP and SW-DP are disabled) config STM32_JTAG_DISABLE bool "Disable all JTAG clocking" config STM32_JTAG_FULL_ENABLE bool "Enable full SWJ (JTAG-DP + SW-DP)" config STM32_JTAG_NOJNTRST_ENABLE bool "Enable full SWJ (JTAG-DP + SW-DP) but without JNTRST" config STM32_JTAG_SW_ENABLE bool "Set JTAG-DP disabled and SW-DP enabled" endchoice config STM32_FORCEPOWER bool "Force power" default n ---help--- Timer and I2C devices may need to the following to force power to be applied unconditionally at power up. (Otherwise, the device is powered when it is initialized). config ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG bool "Custom clock configuration" default n ---help--- Enables special, board-specific STM32 clock configuration. config STM32_CCMEXCLUDE bool "Exclude CCM SRAM from the heap" depends on STM32_STM32F20XX || STM32_STM32F40XX default y if STM32_DMA1 || STM32_DMA2 ---help--- Exclude CCM SRAM from the HEAP because it cannot be used for DMA. config STM32_FSMC_SRAM bool "External SRAM on FSMC" default n depends on FSMC ---help--- In addition to internal SRAM, SRAM may also be available through the FSMC. config HEAP2_BASE hex "FSMC SRAM base address" default 0x00000000 depends on STM32_FSMC_SRAM ---help--- The base address of the SRAM in the FSMC address space. config HEAP2_END hex "FSMC SRAM end+1 address" default 0x00000000 depends on STM32_FSMC_SRAM ---help--- The end (+1) of the SRAM in the FSMC address space config ARCH_FPU bool "FPU support" default y depends on ARCH_CORTEXM4 ---help--- Build in support for the ARM Cortex-M4 FPU. Only the STM3240xxx supports a floating point unit (FPU) config STM32_TIM1_PWM bool "TIM1 PWM" default n depends on STM32_TIM1 ---help--- Reserve timer 1 for use by PWM Timer devices may be used for different purposes. One special purpose is to generate modulated outputs for such things as motor control. If STM32_TIM1 is defined then THIS following may also be defined to indicate that the timer is intended to be used for pulsed output modulation. config STM32_TIM1_CHANNEL int "TIM1 PWM Output Channel" default 1 depends on STM32_TIM1_PWM ---help--- If TIM1 is enabled for PWM usage, you also need specifies the timer output channel {1,..,4} config STM32_TIM2_PWM bool "TIM2 PWM" default n depends on STM32_TIM2 ---help--- Reserve timer 1 for use by PWM Timer devices may be used for different purposes. One special purpose is to generate modulated outputs for such things as motor control. If STM32_TIM2 is defined then THIS following may also be defined to indicate that the timer is intended to be used for pulsed output modulation. config STM32_TIM2_CHANNEL int "TIM2 PWM Output Channel" default 1 depends on STM32_TIM2_PWM ---help--- If TIM2 is enabled for PWM usage, you also need specifies the timer output channel {1,..,4} config STM32_TIM3_PWM bool "TIM3 PWM" default n depends on STM32_TIM3 ---help--- Reserve timer 1 for use by PWM Timer devices may be used for different purposes. One special purpose is to generate modulated outputs for such things as motor control. If STM32_TIM3 is defined then THIS following may also be defined to indicate that the timer is intended to be used for pulsed output modulation. config STM32_TIM3_CHANNEL int "TIM3 PWM Output Channel" default 1 depends on STM32_TIM3_PWM ---help--- If TIM3 is enabled for PWM usage, you also need specifies the timer output channel {1,..,4} config STM32_TIM4_PWM bool "TIM4 PWM" default n depends on STM32_TIM4 ---help--- Reserve timer 1 for use by PWM Timer devices may be used for different purposes. One special purpose is to generate modulated outputs for such things as motor control. If STM32_TIM4 is defined then THIS following may also be defined to indicate that the timer is intended to be used for pulsed output modulation. config STM32_TIM4_CHANNEL int "TIM4 PWM Output Channel" default 1 depends on STM32_TIM4_PWM ---help--- If TIM4 is enabled for PWM usage, you also need specifies the timer output channel {1,..,4} config STM32_TIM5_PWM bool "TIM5 PWM" default n depends on STM32_TIM5 ---help--- Reserve timer 1 for use by PWM Timer devices may be used for different purposes. One special purpose is to generate modulated outputs for such things as motor control. If STM32_TIM5 is defined then THIS following may also be defined to indicate that the timer is intended to be used for pulsed output modulation. config STM32_TIM5_CHANNEL int "TIM5 PWM Output Channel" default 1 depends on STM32_TIM5_PWM ---help--- If TIM5 is enabled for PWM usage, you also need specifies the timer output channel {1,..,4} config STM32_TIM8_PWM bool "TIM8 PWM" default n depends on STM32_TIM8 ---help--- Reserve timer 1 for use by PWM Timer devices may be used for different purposes. One special purpose is to generate modulated outputs for such things as motor control. If STM32_TIM8 is defined then THIS following may also be defined to indicate that the timer is intended to be used for pulsed output modulation. config STM32_TIM8_CHANNEL int "TIM8 PWM Output Channel" default 1 depends on STM32_TIM8_PWM ---help--- If TIM8 is enabled for PWM usage, you also need specifies the timer output channel {1,..,4} config STM32_TIM9_PWM bool "TIM9 PWM" default n depends on STM32_TIM9 ---help--- Reserve timer 1 for use by PWM Timer devices may be used for different purposes. One special purpose is to generate modulated outputs for such things as motor control. If STM32_TIM9 is defined then THIS following may also be defined to indicate that the timer is intended to be used for pulsed output modulation. config STM32_TIM9_CHANNEL int "TIM9 PWM Output Channel" default 1 depends on STM32_TIM9_PWM ---help--- If TIM9 is enabled for PWM usage, you also need specifies the timer output channel {1,..,4} config STM32_TIM10_PWM bool "TIM10 PWM" default n depends on STM32_TIM10 ---help--- Reserve timer 1 for use by PWM Timer devices may be used for different purposes. One special purpose is to generate modulated outputs for such things as motor control. If STM32_TIM10 is defined then THIS following may also be defined to indicate that the timer is intended to be used for pulsed output modulation. config STM32_TIM10_CHANNEL int "TIM10 PWM Output Channel" default 1 depends on STM32_TIM10_PWM ---help--- If TIM10 is enabled for PWM usage, you also need specifies the timer output channel {1,..,4} config STM32_TIM11_PWM bool "TIM11 PWM" default n depends on STM32_TIM11 ---help--- Reserve timer 1 for use by PWM Timer devices may be used for different purposes. One special purpose is to generate modulated outputs for such things as motor control. If STM32_TIM11 is defined then THIS following may also be defined to indicate that the timer is intended to be used for pulsed output modulation. config STM32_TIM11_CHANNEL int "TIM11 PWM Output Channel" default 1 depends on STM32_TIM11_PWM ---help--- If TIM11 is enabled for PWM usage, you also need specifies the timer output channel {1,..,4} config STM32_TIM12_PWM bool "TIM12 PWM" default n depends on STM32_TIM12 ---help--- Reserve timer 1 for use by PWM Timer devices may be used for different purposes. One special purpose is to generate modulated outputs for such things as motor control. If STM32_TIM12 is defined then THIS following may also be defined to indicate that the timer is intended to be used for pulsed output modulation. config STM32_TIM12_CHANNEL int "TIM12 PWM Output Channel" default 1 depends on STM32_TIM12_PWM ---help--- If TIM12 is enabled for PWM usage, you also need specifies the timer output channel {1,..,4} config STM32_TIM13_PWM bool "TIM13 PWM" default n depends on STM32_TIM13 ---help--- Reserve timer 1 for use by PWM Timer devices may be used for different purposes. One special purpose is to generate modulated outputs for such things as motor control. If STM32_TIM13 is defined then THIS following may also be defined to indicate that the timer is intended to be used for pulsed output modulation. config STM32_TIM13_CHANNEL int "TIM13 PWM Output Channel" default 1 depends on STM32_TIM13_PWM ---help--- If TIM13 is enabled for PWM usage, you also need specifies the timer output channel {1,..,4} config STM32_TIM14_PWM bool "TIM14 PWM" default n depends on STM32_TIM14 ---help--- Reserve timer 1 for use by PWM Timer devices may be used for different purposes. One special purpose is to generate modulated outputs for such things as motor control. If STM32_TIM14 is defined then THIS following may also be defined to indicate that the timer is intended to be used for pulsed output modulation. config STM32_TIM14_CHANNEL int "TIM14 PWM Output Channel" default 1 depends on STM32_TIM14_PWM ---help--- If TIM14 is enabled for PWM usage, you also need specifies the timer output channel {1,..,4} config STM32_TIM1_ADC bool "TIM1 ADC" default n depends on STM32_TIM1 && STM32_ADC ---help--- Reserve timer 1 for use by ADC Timer devices may be used for different purposes. If STM32_TIM1 is defined then the following may also be defined to indicate that the timer is intended to be used for ADC conversion. Note that ADC usage requires two definition: Not only do you have to assign the timer for used by the ADC, but then you also have to configure which ADC channel it is assigned to. choice prompt "Select TIM1 ADC channel" default STM32_TIM1_ADC1 depends on STM32_TIM1_ADC config STM32_TIM1_ADC1 bool "TIM1 ADC channel 1" ---help--- Reserve TIM1 to trigger ADC1 config STM32_TIM1_ADC2 bool "TIM1 ADC channel 2" ---help--- Reserve TIM1 to trigger ADC2 config STM32_TIM1_ADC3 bool "TIM1 ADC channel 3" ---help--- Reserve TIM1 to trigger ADC3 endchoice config STM32_TIM2_ADC bool "TIM2 ADC" default n depends on STM32_TIM2 && STM32_ADC ---help--- Reserve timer 1 for use by ADC Timer devices may be used for different purposes. If STM32_TIM2 is defined then the following may also be defined to indicate that the timer is intended to be used for ADC conversion. Note that ADC usage requires two definition: Not only do you have to assign the timer for used by the ADC, but then you also have to configure which ADC channel it is assigned to. choice prompt "Select TIM2 ADC channel" default STM32_TIM2_ADC1 depends on STM32_TIM2_ADC config STM32_TIM2_ADC1 bool "TIM2 ADC channel 1" ---help--- Reserve TIM2 to trigger ADC1 config STM32_TIM2_ADC2 bool "TIM2 ADC channel 2" ---help--- Reserve TIM2 to trigger ADC2 config STM32_TIM2_ADC3 bool "TIM2 ADC channel 3" ---help--- Reserve TIM2 to trigger ADC3 endchoice config STM32_TIM3_ADC bool "TIM3 ADC" default n depends on STM32_TIM3 && STM32_ADC ---help--- Reserve timer 1 for use by ADC Timer devices may be used for different purposes. If STM32_TIM3 is defined then the following may also be defined to indicate that the timer is intended to be used for ADC conversion. Note that ADC usage requires two definition: Not only do you have to assign the timer for used by the ADC, but then you also have to configure which ADC channel it is assigned to. choice prompt "Select TIM3 ADC channel" default STM32_TIM3_ADC1 depends on STM32_TIM3_ADC config STM32_TIM3_ADC1 bool "TIM3 ADC channel 1" ---help--- Reserve TIM3 to trigger ADC1 config STM32_TIM3_ADC2 bool "TIM3 ADC channel 2" ---help--- Reserve TIM3 to trigger ADC2 config STM32_TIM3_ADC3 bool "TIM3 ADC channel 3" ---help--- Reserve TIM3 to trigger ADC3 endchoice config STM32_TIM4_ADC bool "TIM4 ADC" default n depends on STM32_TIM4 && STM32_ADC ---help--- Reserve timer 1 for use by ADC Timer devices may be used for different purposes. If STM32_TIM4 is defined then the following may also be defined to indicate that the timer is intended to be used for ADC conversion. Note that ADC usage requires two definition: Not only do you have to assign the timer for used by the ADC, but then you also have to configure which ADC channel it is assigned to. choice prompt "Select TIM4 ADC channel" default STM32_TIM4_ADC1 depends on STM32_TIM4_ADC config STM32_TIM4_ADC1 bool "TIM4 ADC channel 1" ---help--- Reserve TIM4 to trigger ADC1 config STM32_TIM4_ADC2 bool "TIM4 ADC channel 2" ---help--- Reserve TIM4 to trigger ADC2 config STM32_TIM4_ADC3 bool "TIM4 ADC channel 3" ---help--- Reserve TIM4 to trigger ADC3 endchoice config STM32_TIM5_ADC bool "TIM5 ADC" default n depends on STM32_TIM5 && STM32_ADC ---help--- Reserve timer 1 for use by ADC Timer devices may be used for different purposes. If STM32_TIM5 is defined then the following may also be defined to indicate that the timer is intended to be used for ADC conversion. Note that ADC usage requires two definition: Not only do you have to assign the timer for used by the ADC, but then you also have to configure which ADC channel it is assigned to. choice prompt "Select TIM5 ADC channel" default STM32_TIM5_ADC1 depends on STM32_TIM5_ADC config STM32_TIM5_ADC1 bool "TIM5 ADC channel 1" ---help--- Reserve TIM5 to trigger ADC1 config STM32_TIM5_ADC2 bool "TIM5 ADC channel 2" ---help--- Reserve TIM5 to trigger ADC2 config STM32_TIM5_ADC3 bool "TIM5 ADC channel 3" ---help--- Reserve TIM5 to trigger ADC3 endchoice config STM32_TIM8_ADC bool "TIM8 ADC" default n depends on STM32_TIM8 && STM32_ADC ---help--- Reserve timer 1 for use by ADC Timer devices may be used for different purposes. If STM32_TIM8 is defined then the following may also be defined to indicate that the timer is intended to be used for ADC conversion. Note that ADC usage requires two definition: Not only do you have to assign the timer for used by the ADC, but then you also have to configure which ADC channel it is assigned to. choice prompt "Select TIM8 ADC channel" default STM32_TIM8_ADC1 depends on STM32_TIM8_ADC config STM32_TIM8_ADC1 bool "TIM8 ADC channel 1" ---help--- Reserve TIM8 to trigger ADC1 config STM32_TIM8_ADC2 bool "TIM8 ADC channel 2" ---help--- Reserve TIM8 to trigger ADC2 config STM32_TIM8_ADC3 bool "TIM8 ADC channel 3" ---help--- Reserve TIM8 to trigger ADC3 endchoice config STM32_TIM1_DAC bool "TIM1 DAC" default n depends on STM32_TIM1 && STM32_DAC ---help--- Reserve timer 1 for use by DAC Timer devices may be used for different purposes. If STM32_TIM1 is defined then the following may also be defined to indicate that the timer is intended to be used for DAC conversion. Note that DAC usage requires two definition: Not only do you have to assign the timer for used by the DAC, but then you also have to configure which DAC channel it is assigned to. choice prompt "Select TIM1 DAC channel" default STM32_TIM1_DAC1 depends on STM32_TIM1_DAC config STM32_TIM1_DAC1 bool "TIM1 DAC channel 1" ---help--- Reserve TIM1 to trigger DAC1 config STM32_TIM1_DAC2 bool "TIM1 DAC channel 2" ---help--- Reserve TIM1 to trigger DAC2 endchoice config STM32_TIM2_DAC bool "TIM2 DAC" default n depends on STM32_TIM2 && STM32_DAC ---help--- Reserve timer 1 for use by DAC Timer devices may be used for different purposes. If STM32_TIM2 is defined then the following may also be defined to indicate that the timer is intended to be used for DAC conversion. Note that DAC usage requires two definition: Not only do you have to assign the timer for used by the DAC, but then you also have to configure which DAC channel it is assigned to. choice prompt "Select TIM2 DAC channel" default STM32_TIM2_DAC1 depends on STM32_TIM2_DAC config STM32_TIM2_DAC1 bool "TIM2 DAC channel 1" ---help--- Reserve TIM2 to trigger DAC1 config STM32_TIM2_DAC2 bool "TIM2 DAC channel 2" ---help--- Reserve TIM2 to trigger DAC2 endchoice config STM32_TIM3_DAC bool "TIM3 DAC" default n depends on STM32_TIM3 && STM32_DAC ---help--- Reserve timer 1 for use by DAC Timer devices may be used for different purposes. If STM32_TIM3 is defined then the following may also be defined to indicate that the timer is intended to be used for DAC conversion. Note that DAC usage requires two definition: Not only do you have to assign the timer for used by the DAC, but then you also have to configure which DAC channel it is assigned to. choice prompt "Select TIM3 DAC channel" default STM32_TIM3_DAC1 depends on STM32_TIM3_DAC config STM32_TIM3_DAC1 bool "TIM3 DAC channel 1" ---help--- Reserve TIM3 to trigger DAC1 config STM32_TIM3_DAC2 bool "TIM3 DAC channel 2" ---help--- Reserve TIM3 to trigger DAC2 endchoice config STM32_TIM4_DAC bool "TIM4 DAC" default n depends on STM32_TIM4 && STM32_DAC ---help--- Reserve timer 1 for use by DAC Timer devices may be used for different purposes. If STM32_TIM4 is defined then the following may also be defined to indicate that the timer is intended to be used for DAC conversion. Note that DAC usage requires two definition: Not only do you have to assign the timer for used by the DAC, but then you also have to configure which DAC channel it is assigned to. choice prompt "Select TIM4 DAC channel" default STM32_TIM4_DAC1 depends on STM32_TIM4_DAC config STM32_TIM4_DAC1 bool "TIM4 DAC channel 1" ---help--- Reserve TIM4 to trigger DAC1 config STM32_TIM4_DAC2 bool "TIM4 DAC channel 2" ---help--- Reserve TIM4 to trigger DAC2 endchoice config STM32_TIM5_DAC bool "TIM5 DAC" default n depends on STM32_TIM5 && STM32_DAC ---help--- Reserve timer 1 for use by DAC Timer devices may be used for different purposes. If STM32_TIM5 is defined then the following may also be defined to indicate that the timer is intended to be used for DAC conversion. Note that DAC usage requires two definition: Not only do you have to assign the timer for used by the DAC, but then you also have to configure which DAC channel it is assigned to. choice prompt "Select TIM5 DAC channel" default STM32_TIM5_DAC1 depends on STM32_TIM5_DAC config STM32_TIM5_DAC1 bool "TIM5 DAC channel 1" ---help--- Reserve TIM5 to trigger DAC1 config STM32_TIM5_DAC2 bool "TIM5 DAC channel 2" ---help--- Reserve TIM5 to trigger DAC2 endchoice config STM32_TIM6_DAC bool "TIM6 DAC" default n depends on STM32_TIM6 && STM32_DAC ---help--- Reserve timer 1 for use by DAC Timer devices may be used for different purposes. If STM32_TIM6 is defined then the following may also be defined to indicate that the timer is intended to be used for DAC conversion. Note that DAC usage requires two definition: Not only do you have to assign the timer for used by the DAC, but then you also have to configure which DAC channel it is assigned to. choice prompt "Select TIM6 DAC channel" default STM32_TIM6_DAC1 depends on STM32_TIM6_DAC config STM32_TIM6_DAC1 bool "TIM6 DAC channel 1" ---help--- Reserve TIM6 to trigger DAC1 config STM32_TIM6_DAC2 bool "TIM6 DAC channel 2" ---help--- Reserve TIM6 to trigger DAC2 endchoice config STM32_TIM7_DAC bool "TIM7 DAC" default n depends on STM32_TIM7 && STM32_DAC ---help--- Reserve timer 1 for use by DAC Timer devices may be used for different purposes. If STM32_TIM7 is defined then the following may also be defined to indicate that the timer is intended to be used for DAC conversion. Note that DAC usage requires two definition: Not only do you have to assign the timer for used by the DAC, but then you also have to configure which DAC channel it is assigned to. choice prompt "Select TIM7 DAC channel" default STM32_TIM7_DAC1 depends on STM32_TIM7_DAC config STM32_TIM7_DAC1 bool "TIM7 DAC channel 1" ---help--- Reserve TIM7 to trigger DAC1 config STM32_TIM7_DAC2 bool "TIM7 DAC channel 2" ---help--- Reserve TIM7 to trigger DAC2 endchoice config STM32_TIM8_DAC bool "TIM8 DAC" default n depends on STM32_TIM8 && STM32_DAC ---help--- Reserve timer 1 for use by DAC Timer devices may be used for different purposes. If STM32_TIM8 is defined then the following may also be defined to indicate that the timer is intended to be used for DAC conversion. Note that DAC usage requires two definition: Not only do you have to assign the timer for used by the DAC, but then you also have to configure which DAC channel it is assigned to. choice prompt "Select TIM8 DAC channel" default STM32_TIM8_DAC1 depends on STM32_TIM8_DAC config STM32_TIM8_DAC1 bool "TIM8 DAC channel 1" ---help--- Reserve TIM8 to trigger DAC1 config STM32_TIM8_DAC2 bool "TIM8 DAC channel 2" ---help--- Reserve TIM8 to trigger DAC2 endchoice config STM32_TIM9_DAC bool "TIM9 DAC" default n depends on STM32_TIM9 && STM32_DAC ---help--- Reserve timer 1 for use by DAC Timer devices may be used for different purposes. If STM32_TIM9 is defined then the following may also be defined to indicate that the timer is intended to be used for DAC conversion. Note that DAC usage requires two definition: Not only do you have to assign the timer for used by the DAC, but then you also have to configure which DAC channel it is assigned to. choice prompt "Select TIM9 DAC channel" default STM32_TIM9_DAC1 depends on STM32_TIM9_DAC config STM32_TIM9_DAC1 bool "TIM9 DAC channel 1" ---help--- Reserve TIM9 to trigger DAC1 config STM32_TIM9_DAC2 bool "TIM9 DAC channel 2" ---help--- Reserve TIM9 to trigger DAC2 endchoice config STM32_TIM10_DAC bool "TIM10 DAC" default n depends on STM32_TIM10 && STM32_DAC ---help--- Reserve timer 1 for use by DAC Timer devices may be used for different purposes. If STM32_TIM10 is defined then the following may also be defined to indicate that the timer is intended to be used for DAC conversion. Note that DAC usage requires two definition: Not only do you have to assign the timer for used by the DAC, but then you also have to configure which DAC channel it is assigned to. choice prompt "Select TIM10 DAC channel" default STM32_TIM10_DAC1 depends on STM32_TIM10_DAC config STM32_TIM10_DAC1 bool "TIM10 DAC channel 1" ---help--- Reserve TIM10 to trigger DAC1 config STM32_TIM10_DAC2 bool "TIM10 DAC channel 2" ---help--- Reserve TIM10 to trigger DAC2 endchoice config STM32_TIM11_DAC bool "TIM11 DAC" default n depends on STM32_TIM11 && STM32_DAC ---help--- Reserve timer 1 for use by DAC Timer devices may be used for different purposes. If STM32_TIM11 is defined then the following may also be defined to indicate that the timer is intended to be used for DAC conversion. Note that DAC usage requires two definition: Not only do you have to assign the timer for used by the DAC, but then you also have to configure which DAC channel it is assigned to. choice prompt "Select TIM11 DAC channel" default STM32_TIM11_DAC1 depends on STM32_TIM11_DAC config STM32_TIM11_DAC1 bool "TIM11 DAC channel 1" ---help--- Reserve TIM11 to trigger DAC1 config STM32_TIM11_DAC2 bool "TIM11 DAC channel 2" ---help--- Reserve TIM11 to trigger DAC2 endchoice config STM32_TIM12_DAC bool "TIM12 DAC" default n depends on STM32_TIM12 && STM32_DAC ---help--- Reserve timer 1 for use by DAC Timer devices may be used for different purposes. If STM32_TIM12 is defined then the following may also be defined to indicate that the timer is intended to be used for DAC conversion. Note that DAC usage requires two definition: Not only do you have to assign the timer for used by the DAC, but then you also have to configure which DAC channel it is assigned to. choice prompt "Select TIM12 DAC channel" default STM32_TIM12_DAC1 depends on STM32_TIM12_DAC config STM32_TIM12_DAC1 bool "TIM12 DAC channel 1" ---help--- Reserve TIM12 to trigger DAC1 config STM32_TIM12_DAC2 bool "TIM12 DAC channel 2" ---help--- Reserve TIM12 to trigger DAC2 endchoice config STM32_TIM13_DAC bool "TIM13 DAC" default n depends on STM32_TIM13 && STM32_DAC ---help--- Reserve timer 1 for use by DAC Timer devices may be used for different purposes. If STM32_TIM13 is defined then the following may also be defined to indicate that the timer is intended to be used for DAC conversion. Note that DAC usage requires two definition: Not only do you have to assign the timer for used by the DAC, but then you also have to configure which DAC channel it is assigned to. choice prompt "Select TIM13 DAC channel" default STM32_TIM13_DAC1 depends on STM32_TIM13_DAC config STM32_TIM13_DAC1 bool "TIM13 DAC channel 1" ---help--- Reserve TIM13 to trigger DAC1 config STM32_TIM13_DAC2 bool "TIM13 DAC channel 2" ---help--- Reserve TIM13 to trigger DAC2 endchoice config STM32_TIM14_DAC bool "TIM14 DAC" default n depends on STM32_TIM14 && STM32_DAC ---help--- Reserve timer 1 for use by DAC Timer devices may be used for different purposes. If STM32_TIM14 is defined then the following may also be defined to indicate that the timer is intended to be used for DAC conversion. Note that DAC usage requires two definition: Not only do you have to assign the timer for used by the DAC, but then you also have to configure which DAC channel it is assigned to. choice prompt "Select TIM14 DAC channel" default STM32_TIM14_DAC1 depends on STM32_TIM14_DAC config STM32_TIM14_DAC1 bool "TIM14 DAC channel 1" ---help--- Reserve TIM14 to trigger DAC1 config STM32_TIM14_DAC2 bool "TIM14 DAC channel 2" ---help--- Reserve TIM14 to trigger DAC2 endchoice menu "USART1 Configuration" depends on STM32_USART1 config USART1_SERIAL_CONSOLE bool "USART1 serial console" default y ---help--- Selects the USART1 for the console and ttys0 (default is the USART1). config USART1_RXBUFSIZE int "USART1 Rx buffer size" default 256 ---help--- Characters are buffered as received. This specific the size of the receive buffer. config USART1_TXBUFSIZE int "USART1 Tx buffer size" default 256 ---help--- Characters are buffered before being sent. This specific the size of the transmit buffer config USART1_BAUD int "USART1 BAUD" default 11520 ---help--- The configured BAUD of the UART config USART1_BITS int "USART1 number of bits" default 8 ---help--- The number of bits. Must be either 7 or 8. config USART1_PARITY int "USART1 parity" default 0 ---help--- 0=no parity, 1=odd parity, 2=even parity config USART1_2STOP int "USART1 two stop bits" default 0 ---help--- 0=1 stop bit, 1=Two stop bits. Default: 1 stop bit config USART1_RXDMA bool "USART1 Rx DMA" default n depends on STM32_STM32F40XX && ARCH_DMA && STM32_DMA2 ---help--- In high data rate usage, Rx DMA may eliminate Rx overrun errors endmenu menu "USART2 Configuration" depends on STM32_USART2 config USART2_SERIAL_CONSOLE bool "USART2 serial console" default y if !STM32_USART1 ---help--- Selects the USART2 for the console and ttys0 (default is the USART2). config USART2_RXBUFSIZE int "USART2 Rx buffer size" default 256 ---help--- Characters are buffered as received. This specific the size of the receive buffer. config USART2_TXBUFSIZE int "USART2 Tx buffer size" default 256 ---help--- Characters are buffered before being sent. This specific the size of the transmit buffer config USART2_BAUD int "USART2 BAUD" default 11520 ---help--- The configured BAUD of the UART config USART2_BITS int "USART2 number of bits" default 8 ---help--- The number of bits. Must be either 7 or 8. config USART2_PARITY int "USART2 parity" default 0 ---help--- 0=no parity, 1=odd parity, 2=even parity config USART2_2STOP int "USART2 two stop bits" default 0 ---help--- 0=1 stop bit, 1=Two stop bits. Default: 1 stop bit config USART2_RXDMA bool "USART2 Rx DMA" default n depends on STM32_STM32F40XX && ARCH_DMA && STM32_DMA1 ---help--- In high data rate usage, Rx DMA may eliminate Rx overrun errors endmenu menu "USART3 Configuration" depends on STM32_USART3 config USART3_SERIAL_CONSOLE bool "USART3 serial console" default y if !STM32_USART1 && !STM32_USART2 ---help--- Selects the USART3 for the console and ttys0 (default is the USART3). config USART3_RXBUFSIZE int "USART3 Rx buffer size" default 256 ---help--- Characters are buffered as received. This specific the size of the receive buffer. config USART3_TXBUFSIZE int "USART3 Tx buffer size" default 256 ---help--- Characters are buffered before being sent. This specific the size of the transmit buffer config USART3_BAUD int "USART3 BAUD" default 11520 ---help--- The configured BAUD of the UART config USART3_BITS int "USART3 number of bits" default 8 ---help--- The number of bits. Must be either 7 or 8. config USART3_PARITY int "USART3 parity" default 0 ---help--- 0=no parity, 1=odd parity, 2=even parity config USART3_2STOP int "USART3 two stop bits" default 0 ---help--- 0=1 stop bit, 1=Two stop bits. Default: 1 stop bit config USART3_RXDMA bool "USART3 Rx DMA" default n depends on STM32_STM32F40XX && ARCH_DMA && STM32_DMA1 ---help--- In high data rate usage, Rx DMA may eliminate Rx overrun errors endmenu menu "UART4 Configuration" depends on STM32_UART4 config UART4_SERIAL_CONSOLE bool "UART4 serial console" default y if !STM32_USART1 && !STM32_USART2 && !STM32_USART3 ---help--- Selects the UART4 for the console and ttys0 (default is the USART1). config UART4_RXBUFSIZE int "UART4 Rx buffer size" default 256 ---help--- Characters are buffered as received. This specific the size of the receive buffer. config UART4_TXBUFSIZE int "UART4 Tx buffer size" default 256 ---help--- Characters are buffered before being sent. This specific the size of the transmit buffer config UART4_BAUD int "UART4 BAUD" default 11520 ---help--- The configured BAUD of the UART config UART4_BITS int "UART4 number of bits" default 8 ---help--- The number of bits. Must be either 7 or 8. config UART4_PARITY int "UART4 parity" default 0 ---help--- 0=no parity, 1=odd parity, 2=even parity config UART4_2STOP int "UART4 two stop bits" default 0 ---help--- 0=1 stop bit, 1=Two stop bits. Default: 1 stop bit config UART4_RXDMA bool "UART4 Rx DMA" default n depends on STM32_STM32F40XX && ARCH_DMA && STM32_DMA1 ---help--- In high data rate usage, Rx DMA may eliminate Rx overrun errors endmenu menu "UART5 Configuration" depends on STM32_UART5 config UART5_SERIAL_CONSOLE bool "UART5 serial console" default y if !STM32_USART1 && !STM32_USART2 && !STM32_USART3 && !STM32_UART4 ---help--- Selects the UART5 for the console and ttys0 (default is the USART1). config UART5_RXBUFSIZE int "UART5 Rx buffer size" default 256 ---help--- Characters are buffered as received. This specific the size of the receive buffer. config UART5_TXBUFSIZE int "UART5 Tx buffer size" default 256 ---help--- Characters are buffered before being sent. This specific the size of the transmit buffer config UART5_BAUD int "UART5 BAUD" default 11520 ---help--- The configured BAUD of the UART config UART5_BITS int "UART5 number of bits" default 8 ---help--- The number of bits. Must be either 7 or 8. config UART5_PARITY int "UART5 parity" default 0 ---help--- 0=no parity, 1=odd parity, 2=even parity config UART5_2STOP int "UART5 two stop bits" default 0 ---help--- 0=1 stop bit, 1=Two stop bits. Default: 1 stop bit config UART5_RXDMA bool "UART5 Rx DMA" default n depends on STM32_STM32F40XX && ARCH_DMA && STM32_DMA1 ---help--- In high data rate usage, Rx DMA may eliminate Rx overrun errors endmenu menu "USART6 Configuration" depends on STM32_USART6 config USART6_SERIAL_CONSOLE bool "USART6 serial console" default y if !STM32_USART1 && !STM32_USART2 && !STM32_USART3 && !STM32_UART4 && !STM32_UART5 ---help--- Selects the USART6 for the console and ttys0 (default is the USART6). config USART6_RXBUFSIZE int "USART6 Rx buffer size" default 256 ---help--- Characters are buffered as received. This specific the size of the receive buffer. config USART6_TXBUFSIZE int "USART6 Tx buffer size" default 256 ---help--- Characters are buffered before being sent. This specific the size of the transmit buffer config USART6_BAUD int "USART6 BAUD" default 11520 ---help--- The configured BAUD of the UART config USART6_BITS int "USART6 number of bits" default 8 ---help--- The number of bits. Must be either 7 or 8. config USART6_PARITY int "USART6 parity" default 0 ---help--- 0=no parity, 1=odd parity, 2=even parity config USART6_2STOP int "USART6 two stop bits" default 0 ---help--- 0=1 stop bit, 1=Two stop bits. Default: 1 stop bit config USART6_RXDMA bool "USART6 Rx DMA" default n depends on STM32_STM32F40XX && ARCH_DMA && STM32_DMA2 ---help--- In high data rate usage, Rx DMA may eliminate Rx overrun errors endmenu config SERIAL_TERMIOS bool "Serial driver TERMIOS supported" depends on STM32_USART1 || STM32_USART2 || STM32_USART3 || STM32_UART4 || STM32_UART5 || STM32_USART6 default n ---help--- Serial driver supports termios.h interfaces (tcsetattr, tcflush, etc.). If this is not defined, then the terminal settings (baud, parity, etc). are not configurable at runtime; serial streams cannot be flushed, etc.. menu "SPI Configuration" depends on STM32_SPI config STM32_SPI_INTERRUPTS bool "Interrupt driver SPI" default n ---help--- Select to enable interrupt driven SPI support. Non-interrupt-driven, poll-waiting is recommended if the interrupt rate would be to high in the interrupt driven case. config STM32_SPI_DMA bool "SPI DMA" default n ---help--- Use DMA to improve SPI transfer performance. Cannot be used with STM32_SPI_INTERRUPT. endmenu menu "SDIO Configuration" depends on STM32_SDIO config SDIO_DMA bool "Support DMA data transfers" default y if STM32_DMA2 depends on STM32_DMA2 ---help--- Support DMA data transfers. Requires STM32_SDIO and config STM32_DMA2. config SDIO_PRI hex "SDIO interrupt priority" default 128 ---help--- Select SDIO interrupt prority. Default: 128. config SDIO_DMAPRIO hex "SDIO DMA priority" default 0x00001000 ---help--- Select SDIO DMA prority. Options: 0x00000000 low, 0x00001000 medium, 0x00002000 high, 0x00003000 very high. Default: medium. config SDIO_WIDTH_D1_ONLY bool "Use D1 only" default n ---help--- Select 1-bit transfer mode. Default: 4-bit transfer mode. endmenu menu "Ethernet MAC configuration" config STM32_PHYADDR int "PHY address" ---help--- The 5-bit address of the PHY on the board config STM32_MII bool "Use MII interface" default n ---help--- Support Ethernet MII interface. config STM32_MII_MCO2 bool "Use MC02 as MII clock" default n depends on STM32_MII ---help--- Use MCO2 to clock the MII interface. Default: Use MC01 config STM32_AUTONEG bool "Use autonegtiation" default y ---help--- Use PHY autonegotion to determine speed and mode config STM32_ETHFD bool "Full duplex" default n depends on !STM32_AUTONEG ---help--- If STM32_AUTONEG is not defined, then this may be defined to select full duplex mode. Default: half-duplex config STM32_ETH100MBPS bool "100 Mbps" default n depends on !STM32_AUTONEG ---help--- If STM32_AUTONEG is not defined, then this may be defined to select 100 MBps speed. Default: 10 Mbps config STM32_PHYSR hex "PHY status register address" depends on STM32_AUTONEG ---help--- This must be provided if STM32_AUTONEG is defined. The PHY status register address may diff from PHY to PHY. This configuration sets the address of the PHY status register. config STM32_PHYSR_SPEED hex "PHY speed mask" depends on STM32_AUTONEG ---help--- This must be provided if STM32_AUTONEG is defined. This provides bit mask indicating 10 or 100MBps speed. config STM32_PHYSR_100MBPS hex "PHY 100Mbps speed value" depends on STM32_AUTONEG ---help--- This must be provided if STM32_AUTONEG is defined. This provides the value of the speed bit(s) indicating 100MBps speed. config STM32_PHYSR_MODE hex "PHY mode mask" depends on STM32_AUTONEG ---help--- This must be provided if STM32_AUTONEG is defined. This provide bit mask indicating full or half duplex modes. config STM32_PHYSR_FULLDUPLEX hex "PHY full duplex mode value" depends on STM32_AUTONEG ---help--- This must be provided if STM32_AUTONEG is defined. This provides the value of the mode bits indicating full duplex mode. config STM32_ETH_PTP bool "Precision Time Protocol (PTP)" default n ---help--- Precision Time Protocol (PTP). Not supported but some hooks are indicated with this condition. endmenu config STM32_RMII bool default y if !STM32_MII config STM32_MII_MCO1 bool default y if !STM32_MII_MCO2 depends on STM32_MII menu "USB Host Configuration" config STM32_OTGFS_RXFIFO_SIZE int "Rx Packet Size" default 128 depends on USBHOST && STM32_OTGFS ---help--- Size of the RX FIFO in 32-bit words. Default 128 (512 bytes) config STM32_OTGFS_NPTXFIFO_SIZE int "Non-periodic Tx FIFO Size" default 96 depends on USBHOST && STM32_OTGFS ---help--- Size of the non-periodic Tx FIFO in 32-bit words. Default 96 (384 bytes) config STM32_OTGFS_PTXFIFO_SIZE int "Periodic Tx FIFO size" default 128 depends on USBHOST && STM32_OTGFS ---help--- Size of the periodic Tx FIFO in 32-bit words. Default 96 (384 bytes) config STM32_OTGFS_DESCSIZE int "Descriptor Size" default 128 depends on USBHOST && STM32_OTGFS ---help--- Maximum size to allocate for descriptor memory descriptor. Default: 128 config STM32_OTGFS_SOFINTR bool "Enable SOF interrupts" default n depends on USBHOST && STM32_OTGFS ---help--- Enable SOF interrupts. Why would you ever want to do that? config STM32_USBHOST_REGDEBUG bool "Register-Level Debug" default n depends on USBHOST && STM32_OTGFS ---help--- Enable very low-level register access debug. Depends on CONFIG_DEBUG. config STM32_USBHOST_PKTDUMP bool "Packet Dump Debug" default n depends on USBHOST && STM32_OTGFS ---help--- Dump all incoming and outgoing USB packets. Depends on CONFIG_DEBUG. endmenu