/**************************************************************************** * examples/nxtext/nxtext_main.c * * Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #ifdef CONFIG_NX_LCDDRIVER # include #else # include #endif #include #include #include #include #include "nxtext_internal.h" /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Configuration ************************************************************/ /* If not specified, assume that the hardware supports one video plane */ #ifndef CONFIG_EXAMPLES_NXTEXT_VPLANE # define CONFIG_EXAMPLES_NXTEXT_VPLANE 0 #endif /* If not specified, assume that the hardware supports one LCD device */ #ifndef CONFIG_EXAMPLES_NXTEXT_DEVNO # define CONFIG_EXAMPLES_NXTEXT_DEVNO 0 #endif #define BGMSG_LINES 24 /**************************************************************************** * Private Types ****************************************************************************/ /**************************************************************************** * Private Function Prototypes ****************************************************************************/ /**************************************************************************** * Private Data ****************************************************************************/ #ifdef CONFIG_NX_KBD static const uint8_t g_pumsg[] = "Pop-Up!"; static const char *g_bgmsg[BGMSG_LINES] = { "\nJULIET\n", /* Line 1 */ "Wilt thou be gone?\n", /* Line 2 */ " It is not yet near day:\n", /* Line 3 */ "It was the nightingale,\n", /* Line 4 */ " and not the lark,\n", /* Line 5 */ "That pierced the fearful hollow\n", /* Line 6 */ " of thine ear;\n", /* Line 7 */ "Nightly she sings\n", /* Line 8 */ " on yon pomegranate-tree:\n", /* Line 9 */ "Believe me, love,\n", /* Line 10 */ " it was the nightingale.\n", /* Line 11 */ "\nROMEO\n", /* Line 12 */ "It was the lark,\n", /* Line 13 */ " the herald of the morn,\n", /* Line 14 */ "No nightingale:\n", /* Line 15 */ " look, love, what envious streaks\n", /* Line 16 */ "Do lace the severing clouds\n", /* Line 17 */ " in yonder east:\n", /* Line 18 */ "Night's candles are burnt out,\n", /* Line 19 */ " and jocund day\n", /* Line 20 */ "Stands tiptoe\n", /* Line 21 */ " on the misty mountain tops.\n", /* Line 22 */ "I must be gone and live,\n", /* Line 23 */ " or stay and die.\n" /* Line 24 */ }; #endif /**************************************************************************** * Public Data ****************************************************************************/ /* The connecton handler */ NXHANDLE g_hnx = NULL; /* The font handles */ NXHANDLE g_bghfont = NULL; NXHANDLE g_puhfont = NULL; /* The screen resolution */ nxgl_coord_t g_xres; nxgl_coord_t g_yres; bool b_haveresolution = false; #ifdef CONFIG_NX_MULTIUSER bool g_connected = false; #endif sem_t g_semevent = {0}; int g_exitcode = NXEXIT_SUCCESS; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: nxtext_suinitialize ****************************************************************************/ #ifndef CONFIG_NX_MULTIUSER static inline int nxtext_suinitialize(void) { FAR NX_DRIVERTYPE *dev; #if defined(CONFIG_EXAMPLES_NXTEXT_EXTERNINIT) /* Use external graphics driver initialization */ message("nxtext_initialize: Initializing external graphics device\n"); dev = up_nxdrvinit(CONFIG_EXAMPLES_NXTEXT_DEVNO); if (!dev) { message("nxtext_initialize: up_nxdrvinit failed, devno=%d\n", CONFIG_EXAMPLES_NXTEXT_DEVNO); g_exitcode = NXEXIT_EXTINITIALIZE; return ERROR; } #elif defined(CONFIG_NX_LCDDRIVER) int ret; /* Initialize the LCD device */ message("nxtext_initialize: Initializing LCD\n"); ret = up_lcdinitialize(); if (ret < 0) { message("nxtext_initialize: up_lcdinitialize failed: %d\n", -ret); g_exitcode = NXEXIT_LCDINITIALIZE; return ERROR; } /* Get the device instance */ dev = up_lcdgetdev(CONFIG_EXAMPLES_NXTEXT_DEVNO); if (!dev) { message("nxtext_initialize: up_lcdgetdev failed, devno=%d\n", CONFIG_EXAMPLES_NXTEXT_DEVNO); g_exitcode = NXEXIT_LCDGETDEV; return ERROR; } /* Turn the LCD on at 75% power */ (void)dev->setpower(dev, ((3*CONFIG_LCD_MAXPOWER + 3)/4)); #else int ret; /* Initialize the frame buffer device */ message("nxtext_initialize: Initializing framebuffer\n"); ret = up_fbinitialize(); if (ret < 0) { message("nxtext_initialize: up_fbinitialize failed: %d\n", -ret); g_exitcode = NXEXIT_FBINITIALIZE; return ERROR; } dev = up_fbgetvplane(CONFIG_EXAMPLES_NXTEXT_VPLANE); if (!dev) { message("nxtext_initialize: up_fbgetvplane failed, vplane=%d\n", CONFIG_EXAMPLES_NXTEXT_VPLANE); g_exitcode = NXEXIT_FBGETVPLANE; return ERROR; } #endif /* Then open NX */ message("nxtext_initialize: Open NX\n"); g_hnx = nx_open(dev); if (!g_hnx) { message("nxtext_initialize: nx_open failed: %d\n", errno); g_exitcode = NXEXIT_NXOPEN; return ERROR; } return OK; } #endif /**************************************************************************** * Name: nxtext_initialize ****************************************************************************/ #ifdef CONFIG_NX_MULTIUSER static inline int nxtext_muinitialize(void) { struct sched_param param; pthread_t thread; pid_t servrid; int ret; /* Set the client task priority */ param.sched_priority = CONFIG_EXAMPLES_NXTEXT_CLIENTPRIO; ret = sched_setparam(0, ¶m); if (ret < 0) { message("nxtext_initialize: sched_setparam failed: %d\n" , ret); g_exitcode = NXEXIT_SCHEDSETPARAM; return ERROR; } /* Start the server task */ message("nxtext_initialize: Starting nxtext_server task\n"); servrid = task_create("NX Server", CONFIG_EXAMPLES_NXTEXT_SERVERPRIO, CONFIG_EXAMPLES_NXTEXT_STACKSIZE, nxtext_server, NULL); if (servrid < 0) { message("nxtext_initialize: Failed to create nxtext_server task: %d\n", errno); g_exitcode = NXEXIT_TASKCREATE; return ERROR; } /* Wait a bit to let the server get started */ sleep(1); /* Connect to the server */ g_hnx = nx_connect(); if (g_hnx) { pthread_attr_t attr; /* Start a separate thread to listen for server events. This is probably * the least efficient way to do this, but it makes this example flow more * smoothly. */ (void)pthread_attr_init(&attr); param.sched_priority = CONFIG_EXAMPLES_NXTEXT_LISTENERPRIO; (void)pthread_attr_setschedparam(&attr, ¶m); (void)pthread_attr_setstacksize(&attr, CONFIG_EXAMPLES_NXTEXT_STACKSIZE); ret = pthread_create(&thread, &attr, nxtext_listener, NULL); if (ret != 0) { printf("nxtext_initialize: pthread_create failed: %d\n", ret); g_exitcode = NXEXIT_PTHREADCREATE; return ERROR; } /* Don't return until we are connected to the server */ while (!g_connected) { /* Wait for the listener thread to wake us up when we really * are connected. */ (void)sem_wait(&g_semevent); } } else { message("nxtext_initialize: nx_connect failed: %d\n", errno); g_exitcode = NXEXIT_NXCONNECT; return ERROR; } return OK; } #endif /**************************************************************************** * Name: nxtext_initialize ****************************************************************************/ static int nxtext_initialize(void) { #ifdef CONFIG_NX_MULTIUSER return nxtext_muinitialize(); #else return nxtext_suinitialize(); #endif } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: nxtext_main ****************************************************************************/ int nxtext_main(int argc, char **argv) { FAR struct nxtext_state_s *bgstate; NXWINDOW hwnd = NULL; nxgl_mxpixel_t color; int popcnt; int bkgndx; int ret; /* Initialize NX */ ret = nxtext_initialize(); message("nxtext_main: NX handle=%p\n", g_hnx); if (!g_hnx || ret < 0) { message("nxtext_main: Failed to get NX handle: %d\n", errno); g_exitcode = NXEXIT_NXOPEN; goto errout; } /* Get the configured font handles */ g_bghfont = nxf_getfonthandle(CONFIG_EXAMPLES_NXTEXT_BGFONTID); if (!g_bghfont) { message("nxtext_main: Failed to get background font handle: %d\n", errno); g_exitcode = NXEXIT_FONTOPEN; goto errout; } g_puhfont = nxf_getfonthandle(CONFIG_EXAMPLES_NXTEXT_PUFONTID); if (!g_puhfont) { message("nxtext_main: Failed to get pop-up font handle: %d\n", errno); g_exitcode = NXEXIT_FONTOPEN; goto errout; } /* Set the background to the configured background color */ message("nxtext_main: Set background color=%d\n", CONFIG_EXAMPLES_NXTEXT_BGCOLOR); color = CONFIG_EXAMPLES_NXTEXT_BGCOLOR; ret = nx_setbgcolor(g_hnx, &color); if (ret < 0) { message("nxtext_main: nx_setbgcolor failed: %d\n", errno); g_exitcode = NXEXIT_NXSETBGCOLOR; goto errout_with_nx; } /* Get the background window */ bgstate = nxbg_getstate(); ret = nx_requestbkgd(g_hnx, &g_nxtextcb, bgstate); if (ret < 0) { message("nxtext_main: nx_setbgcolor failed: %d\n", errno); g_exitcode = NXEXIT_NXREQUESTBKGD; goto errout_with_nx; } /* Wait until we have the screen resolution. We'll have this immediately * unless we are dealing with the NX server. */ while (!b_haveresolution) { (void)sem_wait(&g_semevent); } message("nxtext_main: Screen resolution (%d,%d)\n", g_xres, g_yres); /* Now loop, adding text to the background and periodically presenting * a pop-up window. */ popcnt = 0; bkgndx = 0; for (;;) { /* Sleep for one second */ sleep(1); popcnt++; /* Each three seconds, create a pop-up window. Destroy the pop-up * window after two more seconds. */ if (popcnt == 3) { /* Create a pop-up window */ hwnd = nxpu_open(); /* Give keyboard input to the top window (which should be the pop-up) */ #ifdef CONFIG_NX_KBD message("nxtext_main: Send keyboard input: %s\n", g_pumsg); ret = nx_kbdin(g_hnx, strlen((FAR const char *)g_pumsg), g_pumsg); if (ret < 0) { message("nxtext_main: nx_kbdin failed: %d\n", errno); goto errout_with_hwnd; } #endif } else if (popcnt == 5) { /* Destroy the pop-up window and restart the sequence */ message("nxtext_main: Close pop-up\n"); (void)nxpu_close(hwnd); popcnt = 0; } /* Give another line of text to the background window. Force this * text to go the background by calling the background window interfaces * directly. */ nxbg_write(g_bgwnd, (FAR const uint8_t *)g_bgmsg[bkgndx], strlen(g_bgmsg[bkgndx])); if (++bkgndx >= BGMSG_LINES) { bkgndx = 0; } } /* Close the pop-up window */ errout_with_hwnd: if (popcnt >= 3) { message("nxtext_main: Close pop-up\n"); (void)nxpu_close(hwnd); } //errout_with_bkgd: (void)nx_releasebkgd(g_bgwnd); errout_with_nx: #ifdef CONFIG_NX_MULTIUSER /* Disconnect from the server */ message("nxtext_main: Disconnect from the server\n"); nx_disconnect(g_hnx); #else /* Close the server */ message("nxtext_main: Close NX\n"); nx_close(g_hnx); #endif errout: return g_exitcode; }