Add SCSI definitions
git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@1058 7fd9a85b-ad96-42d3-883c-3090e2eb8679
This commit is contained in:
patacongo
parent
b44597f5f8
commit
fa05304c36
|
|
@ -518,27 +518,38 @@
|
|||
#define SCSICMD_MODESENSE_PGCODEMASK 0x3f /* Bits 0-5: Page code */
|
||||
|
||||
#define SCSICMD_MODESENSE6_PCDEFAULT 0x80 /* Default values */
|
||||
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_VENDOR 0x00 /* Vendor-specific */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_RWERROR 0x01 /* Read/Write error recovery mode page */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_RECONNECT 0x02 /* Disconnect-reconnect mode page */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_FORMATDEV 0x03 /* Format device mode page (obsolete) */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_RIGID 0x04 /* Rigid disk geometry mode page (obsolete) */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_FLEXIBLE 0x05 /* Flexible disk geometry mode page (obsolete) */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_VERIFY 0x07 /* Verify error recovery mode page */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_CACHING 0x08 /* Caching mode page */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_CONTROL 0x0a /* Control mode page (0x0a/0x00) */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_CONTROLEXT 0x0a /* Control extension mode page (0x0a/0x01) */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_MEDIUMTYPES 0x0b /* Medum types supported mode page (obsolete) */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_NP 0x0c /* Notch and partition mode page (obsolete) */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_XOR 0x10 /* XOR control mode page */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_ES 0x14 /* Enclosure services mode page */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_PSLUN 0x18 /* Protocol-specific LUN mode page */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_PSPORT 0x19 /* Protocol-specific port mode page */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_POWER 0x1a /* Power condition mode page */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_IE 0x1c /* Informational exceptions control mode page (0x1c/0x00) */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_BC 0x1c /* Background control mode page (0x1c/0x01) */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_RETURNALL 0x3f /* Return all mode pages */
|
||||
/* Direct-access device page codes */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_VENDOR 0x00 /* Vendor-specific */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_RWERROR 0x01 /* Read/Write error recovery mode page */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_RECONNECT 0x02 /* Disconnect-reconnect mode page */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_FORMATDEV 0x03 /* Format device mode page (obsolete) */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_RIGID 0x04 /* Rigid disk geometry mode page (obsolete) */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_FLEXIBLE 0x05 /* Flexible disk geometry mode page (obsolete) */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_VERIFY 0x07 /* Verify error recovery mode page */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_CACHING 0x08 /* Caching mode page */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_CONTROL 0x0a /* Control mode page (0x0a/0x00) */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_CONTROLEXT 0x0a /* Control extension mode page (0x0a/0x01) */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_MEDIUMTYPES 0x0b /* Medum types supported mode page (obsolete) */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_NP 0x0c /* Notch and partition mode page (obsolete) */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_XOR 0x10 /* XOR control mode page */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_ES 0x14 /* Enclosure services mode page */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_PSLUN 0x18 /* Protocol-specific LUN mode page */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_PSPORT 0x19 /* Protocol-specific port mode page */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_POWER 0x1a /* Power condition mode page */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_IE 0x1c /* Informational exceptions control mode page (0x1c/0x00) */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_BC 0x1c /* Background control mode page (0x1c/0x01) */
|
||||
#define SCSIRESP_MODESENSE_PGCCODE_RETURNALL 0x3f /* Return all mode pages */
|
||||
/* Direct-access caching mode page */
|
||||
#define SCSIRESP_CACHINGMODEPG_PS 0x80 /* Byte 0, Bit 7: PS */
|
||||
#define SCSIRESP_CACHINGMODEPG_SPF 0x60 /* Byte 0, Bit 6: SPF */
|
||||
#define SCSIRESP_CACHINGMODEPG_IC 0x80 /* Byte 2, Bit 7: IC */
|
||||
#define SCSIRESP_CACHINGMODEPG_ABPF 0x40 /* Byte 2, Bit 6: ABPF */
|
||||
#define SCSIRESP_CACHINGMODEPG_CAP 0x20 /* Byte 2, Bit 5: CAP */
|
||||
#define SCSIRESP_CACHINGMODEPG_DISC 0x10 /* Byte 2, Bit 4: DISC */
|
||||
#define SCSIRESP_CACHINGMODEPG_SIZE 0x08 /* Byte 2, Bit 3: SIZE */
|
||||
#define SCSIRESP_CACHINGMODEPG_WCE 0x04 /* Byte 2, Bit 2: Write cache enable (WCE) */
|
||||
#define SCSIRESP_CACHINGMODEPG_MF 0x02 /* Byte 2, Bit 1: MF */
|
||||
#define SCSIRESP_CACHINGMODEPG_RCD 0x01 /* Byte 2, Bit 0: Read cache disable (RCD) */
|
||||
|
||||
#define SCSIRESP_MODEPARMHDR_DAPARM_WP 0x80 /* Bit 7: WP (Direct-access block devices only) */
|
||||
#define SCSIRESP_MODEPARMHDR_DAPARM_DBPFUA 0x10 /* Bit 4: DBOFUA (Direct-access block devices only) */
|
||||
|
|
@ -547,6 +558,11 @@
|
|||
#define SCSIRESP_PAGEFMT_SPF 0x40 /* Bit 6: SPF */
|
||||
#define SCSIRESP_PAGEFMT_PGCODEMASK 0x3f /* Bits 0-5: Page code */
|
||||
|
||||
/* Prevent / Allow Medium Removal */
|
||||
|
||||
#define SCSICMD_PREVENTMEDIUMREMOVAL_TRANSPORT 0x01 /* Removal prohibited from data transport */
|
||||
#define SCSICMD_PREVENTMEDIUMREMOVAL_MCHANGER 0x02 /* Removal prohibited from medium changer */
|
||||
|
||||
/* Read 6 */
|
||||
|
||||
#define SCSICMD_READ6_MSLBAMASK 0x1f
|
||||
|
|
@ -568,31 +584,43 @@
|
|||
/* Read 10 */
|
||||
|
||||
#define SCSICMD_READ10FLAGS_RDPROTECTMASK 0xe0
|
||||
#define SCSICMD_READ10FLAGS_DPO 0x10
|
||||
#define SCSICMD_READ10FLAGS_DPO 0x10 /* Disable Page Out */
|
||||
#define SCSICMD_READ10FLAGS_FUA 0x08
|
||||
#define SCSICMD_READ10FLAGS_FUANV 0x02
|
||||
|
||||
/* Write 10 */
|
||||
|
||||
#define SCSICMD_WRITE10FLAGS_WRPROTECTMASK 0xe0
|
||||
#define SCSICMD_WRITE10FLAGS_DPO 0x10
|
||||
#define SCSICMD_WRITE10FLAGS_DPO 0x10 /* Disable Page Out */
|
||||
#define SCSICMD_WRITE10FLAGS_FUA 0x08
|
||||
#define SCSICMD_WRITE10FLAGS_FUANV 0x02
|
||||
|
||||
/* Verify 10 */
|
||||
|
||||
#define SCSICMD_VERIFY10_VRPROTECTMASK 0xe0 /* Byte 1: Bits 5-7: VRPROTECT */
|
||||
#define SCSICMD_VERIFY10_DPO 0x10 /* Byte 1: Bit 4: Disable Page Out (DPO) */
|
||||
#define SCSICMD_VERIFY10_BYTCHK 0x02 /* Byte 1: Bit 2: BytChk */
|
||||
|
||||
/* Read 12 */
|
||||
|
||||
#define SCSICMD_READ12FLAGS_RDPROTECTMASK 0xe0
|
||||
#define SCSICMD_READ13FLAGS_DPO 0x10
|
||||
#define SCSICMD_READ13FLAGS_DPO 0x10 /* Disable Page Out */
|
||||
#define SCSICMD_READ14FLAGS_FUA 0x08
|
||||
#define SCSICMD_READ15FLAGS_FUANV 0x02
|
||||
|
||||
/* Write 12 */
|
||||
|
||||
#define SCSICMD_WRITE12FLAGS_WRPROTECTMASK 0xe0
|
||||
#define SCSICMD_WRITE12FLAGS_DPO 0x10
|
||||
#define SCSICMD_WRITE12FLAGS_DPO 0x10 /* Disable Page Out */
|
||||
#define SCSICMD_WRITE12FLAGS_FUA 0x08
|
||||
#define SCSICMD_WRITE12FLAGS_FUANV 0x02
|
||||
|
||||
/* Verify 12 */
|
||||
|
||||
#define SCSICMD_VERIFY12_VRPROTECTMASK 0xe0 /* Byte 1: Bits 5-7: VRPROTECT */
|
||||
#define SCSICMD_VERIFY12_DPO 0x10 /* Byte 1: Bit 4: Disable Page Out (DPO) */
|
||||
#define SCSICMD_VERIFY12_BYTCHK 0x02 /* Byte 1: Bit 2: BytChk */
|
||||
|
||||
/****************************************************************************
|
||||
* Public Types
|
||||
****************************************************************************/
|
||||
|
|
@ -723,28 +751,83 @@ struct scsiresp_subpageformat_s
|
|||
ubyte parms[1]; /* 4-n: Mode parameters */
|
||||
};
|
||||
|
||||
struct scsiresp_cachingmodepage_s
|
||||
{
|
||||
ubyte pgcode; /* 0: Bit 7: PS; Bit 6: SPF, Bits 0-5: page code == 8 */
|
||||
ubyte len; /* 1: Page length (18) */
|
||||
ubyte flags1; /* 2: See SCSIRESP_CACHINGMODEPG_* definitions */
|
||||
ubyte priority; /* 3: Bits 4-7: Demand read retention priority; Bits 0-3: Write retention priority */
|
||||
ubyte dpflen[2]; /* 4-5: Disable prefetch transfer length */
|
||||
ubyte minpf[2]; /* 6-7: Minimum pre-fetch */
|
||||
ubyte maxpf[2]; /* 8-9: Maximum pre-fetch */
|
||||
ubyte maxpfc[2]; /* 10-11: Maximum pref-fetch ceiling */
|
||||
ubyte flags2; /* 12: See SCSIRESP_CACHINGMODEPG_* definitions */
|
||||
ubyte nsegments; /* 13: Number of cache segments */
|
||||
ubyte segsize[2]; /* 14-15: Cache segment size */
|
||||
ubyte reserved; /* 16: Reserved */
|
||||
ubyte obsolete[3]; /* 17-19: Obsolete */
|
||||
};
|
||||
|
||||
/* Format structures for selected SCSI block commands */
|
||||
|
||||
struct scsicmd_read6_s
|
||||
{
|
||||
ubyte opcode; /* 0x08 */
|
||||
ubyte mslba; /* Bits 5-7: reserved; Bits 0-6: MS Logical Block Address (LBA) */
|
||||
ubyte lslba[2]; /* LS Logical Block Address (LBA) */
|
||||
ubyte xferlen; /* Transfer length */
|
||||
ubyte control; /* Control */
|
||||
ubyte opcode; /* 0: 0x08 */
|
||||
ubyte mslba; /* 1: Bits 5-7: reserved; Bits 0-6: MS Logical Block Address (LBA) */
|
||||
ubyte lslba[2]; /* 2-3: LS Logical Block Address (LBA) */
|
||||
ubyte xferlen; /* 4: Transfer length */
|
||||
ubyte control; /* 5: Control */
|
||||
};
|
||||
#define SCSICMD_READ6_SIZEOF 6
|
||||
|
||||
struct scsicmd_write6_s
|
||||
{
|
||||
ubyte opcode; /* 0x0a */
|
||||
ubyte mslba; /* Bits 5-7: reserved; Bits 0-6: MS Logical Block Address (LBA) */
|
||||
ubyte lslba[2]; /* LS Logical Block Address (LBA) */
|
||||
ubyte xferlen; /* Transfer length */
|
||||
ubyte control; /* Control */
|
||||
ubyte opcode; /* 0: 0x0a */
|
||||
ubyte mslba; /* 1: Bits 5-7: reserved; Bits 0-6: MS Logical Block Address (LBA) */
|
||||
ubyte lslba[2]; /* 2-3: LS Logical Block Address (LBA) */
|
||||
ubyte xferlen; /* 4: Transfer length */
|
||||
ubyte control; /* 5: Control */
|
||||
};
|
||||
#define SCSICMD_WRITE6_SIZEOF 6
|
||||
|
||||
struct scsicmd_startstopunit_s
|
||||
{
|
||||
ubyte opcode; /* 0: 0x1b */
|
||||
ubyte immed; /* 1: Bits 2-7: Reserved, Bit 0: Immed */
|
||||
ubyte reserved; /* 2: reserved */
|
||||
ubyte pcm; /* 3: Bits 4-7: Reserved, Bits 0-3: Power condition modifier */
|
||||
ubyte pc; /* 4: Bits 4-7: Power condition, Bit 2: NO_FLUSH, Bit 1: LOEJ, Bit 0: START */
|
||||
ubyte control; /* 5: Control */
|
||||
};
|
||||
#define SCSICMD_STARTSTOPUNIT_SIZEOF 6
|
||||
|
||||
struct scsicmd_preventmediumremoval_s
|
||||
{
|
||||
ubyte opcode; /* 0: 0x1e */
|
||||
ubyte reserved[3]: /* 1-3: Reserved */
|
||||
ubyte prevent; /* 4: Bits 2-7: Reserved, Bits 0:1: prevent */
|
||||
ubyte control; /* 5: Control */
|
||||
};
|
||||
#define SCSICMD_PREVENTMEDIUMREMOVAL_SIZEOF 6
|
||||
|
||||
struct scsicmd_readcapacity10_s
|
||||
{
|
||||
ubyte opcode; /* 0: 0x25 */
|
||||
ubyte reserved; /* 1: Bits 1-7: Reserved, Bit 0: Obsolete */
|
||||
ubyte lba[4]; /* 2-5: Logical block address (LBA) */
|
||||
ubyte reserved[2; /* 6-7: Reserved */
|
||||
ubyte pmi; /* 8: Bits 1-7 Reserved; Bit 0: PMI */
|
||||
ubyte control; /* 9: Control */
|
||||
};
|
||||
#define SCSICMD_READCAPACITY10_SIZEOF 10
|
||||
|
||||
struct scsiresp_readcapacity10_s
|
||||
{
|
||||
ubyte lba[4]; /* 0-3: Returned logical block address (LBA) */
|
||||
ubyte blklen[4]; /* 4-7: Logical block length (in bytes) */
|
||||
};
|
||||
#define SCSIRESP_READCAPACITY10_SIZEOF 8
|
||||
|
||||
struct scsicmd_read10_s
|
||||
{
|
||||
ubyte opcode; /* 0x28 */
|
||||
|
|
@ -767,6 +850,28 @@ struct scsicmd_write10_s
|
|||
};
|
||||
#define SCSICMD_WRITE10_SIZEOF 10
|
||||
|
||||
struct scsicmd_verify10_s
|
||||
{
|
||||
ubyte opcode; /* 0: 0x2f */
|
||||
ubyte flags; /* 1: See SCSICMD_VERIFY10_* definitions */
|
||||
ubyte lba[4]; /* 2-5: Logical block address (LBA) */
|
||||
ubyte groupno; /* 6: Bit 7: restricted; Bits 5-6: Reserved, Bits 0-4: Group number */
|
||||
ubyte len[2]; /* 7-8: Verification length (in blocks) */
|
||||
ubyte control; /* 9: Control */
|
||||
};
|
||||
#define SCSICMD_VERIFY10_SIZEOF 10
|
||||
|
||||
struct scsicmd_synchronizecache10_s
|
||||
{
|
||||
ubyte opcode; /* 0: 0x35 */
|
||||
ubyte flags; /* 1: See SCSICMD_SYNCHRONIZECACHE10_* definitions */
|
||||
ubyte lba[4]; /* 2-5: Logical block address (LBA) */
|
||||
ubyte groupno; /* 6: Bit 7: restricted; Bits 5-6: Reserved, Bits 0-4: Group number */
|
||||
ubyte len[2]; /* 7-8: Number of logical blocks */
|
||||
ubyte control; /* 9: Control */
|
||||
};
|
||||
#define SCSICMD_SYNCHRONIZECACHE10_SIZEOF 10
|
||||
|
||||
struct scsicmd_modeselect10_s
|
||||
{
|
||||
ubyte opcode; /* 0: 0x55 */
|
||||
|
|
@ -799,6 +904,17 @@ struct scsicmd_modesense10_s
|
|||
};
|
||||
#define SCSICMD_MODESENSE10_SIZEOF 10
|
||||
|
||||
struct scsicmd_readcapacity16_s
|
||||
{
|
||||
ubyte opcode; /* 0: 0x9e */
|
||||
ubyte action; /* 1: Bits 5-7: Reserved, Bits 0-4: Service action */
|
||||
ubyte lba[8]; /* 2-9: Logical block address (LBA) */
|
||||
ubyte len[4]; /* 10-13: Allocation length */
|
||||
ubyte reserved; /* 14: Reserved */
|
||||
ubyte control; /* 15: Control */
|
||||
};
|
||||
#define SCSICMD_READCAPACITY16_SIZEOF 16
|
||||
|
||||
struct scsicmd_read12_s
|
||||
{
|
||||
ubyte opcode; /* 0xa8 */
|
||||
|
|
@ -821,6 +937,17 @@ struct scsicmd_write12_s
|
|||
};
|
||||
#define SCSICMD_WRITE12_SIZEOF 12
|
||||
|
||||
struct scsicmd_verify12_s
|
||||
{
|
||||
ubyte opcode; /* 0: 0xaf */
|
||||
ubyte flags; /* 1: See SCSICMD_VERIFY12_* definitions */
|
||||
ubyte lba[4]; /* 2-5: Logical block address (LBA) */
|
||||
ubyte len[4]; /* 6-9: Verification length */
|
||||
ubyte groupno; /* 10: Bit 7: restricted; Bits 5-6: Reserved, Bits 0-4: Group number */
|
||||
ubyte control; /* 11: Control */
|
||||
};
|
||||
#define SCSICMD_VERIFY12_SIZEOF 12
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
|
|
|||
Loading…
Reference in New Issue