phone-side
/
nuttx-bb
9
0
Fork 0
Code Releases Activity

Cosmetic 

git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@3499 7fd9a85b-ad96-42d3-883c-3090e2eb8679
This commit is contained in:
patacongo 2011-04-13 18:18:58 +00:00
parent a51988c766
commit f88b9c4992
4 changed files with 27 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
nuttx/ChangeLog
View File

@ -1685,4 +1685,7 @@
} >sram
+ __exidx_end = ABSOLUTE(.);
* arch/arm/src/lpc17xx: Correct some typos/bugs in configuration of LPC17xx
UART2 and UART3.

2
nuttx/arch/arm/include/lpc17xx/irq.h
View File

@ -115,7 +115,7 @@
#define LPC17_IRQ_I2C0 (LPC17_IRQ_EXTINT+10) /* I2C0 SI (state change) */
#define LPC17_IRQ_I2C1 (LPC17_IRQ_EXTINT+11) /* I2C1 SI (state change) */
#define LPC17_IRQ_I2C2 (LPC17_IRQ_EXTINT+12) /* I2C2 SI (state change) */
#define LPC17_IRQ_SPIF (LPC17_IRQ_EXTINT+13) /* SPI SPI Interrupt Flag (SPIF)
#define LPC17_IRQ_SPIF (LPC17_IRQ_EXTINT+13) /* SPI SPI Interrupt Flag (SPIF)
* Mode Fault (MODF) */
#define LPC17_IRQ_SSP0 (LPC17_IRQ_EXTINT+14) /* SSP0 Tx FIFO half empty of SSP0
* Rx FIFO half full of SSP0

7
nuttx/arch/arm/src/lpc17xx/lpc17_serial.c
View File

@ -1,7 +1,7 @@
/****************************************************************************
* arch/arm/src/lpc17xx/lpc17_serial.c
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Copyright (C) 2010-2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
@ -595,7 +595,7 @@ static inline uint32_t lpc17_uartcclkdiv(uint32_t baud)
}
/************************************************************************************
* Name: lpc17_uart0config, uart1config, uart2config, nad uart3config
* Name: lpc17_uart0config, uart1config, uart2config, and uart3config
*
* Descrption:
* Configure the UART. UART0/1/2/3 peripherals are configured using the following
@ -1283,6 +1283,7 @@ void up_earlyserialinit(void)
#endif
up_disableuartint(&g_uart0priv, NULL);
#endif
#ifdef CONFIG_LPC17_UART1
g_uart1priv.cclkdiv = lpc17_uartcclkdiv(CONFIG_UART1_BAUD);
#ifndef CONFIG_UART1_SERIAL_CONSOLE
@ -1290,6 +1291,7 @@ void up_earlyserialinit(void)
#endif
up_disableuartint(&g_uart1priv, NULL);
#endif
#ifdef CONFIG_LPC17_UART2
g_uart2priv.cclkdiv = lpc17_uartcclkdiv(CONFIG_UART2_BAUD);
#ifndef CONFIG_UART2_SERIAL_CONSOLE
@ -1297,6 +1299,7 @@ void up_earlyserialinit(void)
#endif
up_disableuartint(&g_uart2priv, NULL);
#endif
#ifdef CONFIG_LPC17_UART3
g_uart3priv.cclkdiv = lpc17_uartcclkdiv(CONFIG_UART3_BAUD);
#ifndef CONFIG_UART3_SERIAL_CONSOLE

18
nuttx/configs/lpcxpresso-lpc1768/README.txt
View File

@ -538,6 +538,24 @@ selected as follow:
Where <subdir> is one of the following:
nsh:
Configures the NuttShell (nsh) located at examples/nsh. The
Configuration enables both the serial and telnet NSH interfaces.
Support for the board's SPI-based MicroSD card is included
(but not passing tests as of this writing).
ostest:
This configuration directory, performs a simple OS test using
examples/ostest.
NOTE: The OSTest runs on the LPCXpresso if it is not installed
on the base board (using an add-on MAX232 RS232 driver connected
to:
P0[0]/RD1/TXD3/SDA1 J6-9
P0[1]/TD1/RXD3/SCL J6-10
I suspect that this test does not run on with the base board
attached because OSTest blasts out a lot of serial data and
overruns the FTDI chip before it has a chance to establish the
connection with the host.