9
0
Fork 0

Initial debug fixes for LPC1766 ethernet

git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@3114 7fd9a85b-ad96-42d3-883c-3090e2eb8679
This commit is contained in:
patacongo 2010-11-16 02:50:52 +00:00
parent eea10ad3a4
commit bfccd3eff4
10 changed files with 85 additions and 32 deletions

View File

@ -72,6 +72,7 @@
* Definitions
****************************************************************************/
/* Configuration ************************************************************/
/* CONFIG_LPC17_NINTERFACES determines the number of physical interfaces
* that will be supported -- unless it is more than actually supported by the
* hardware!
@ -107,6 +108,29 @@
# define CONFIG_NET_PRIORITY NVIC_SYSH_PRIORITY_MAX
#endif
/* Debug Configuration *****************************************************/
/* Register debug -- can only happen of CONFIG_DEBUG is selected */
#ifndef CONFIG_DEBUG
# undef CONFIG_NET_REGDEBUG
#endif
/* CONFIG_NET_DUMPPACKET will dump the contents of each packet to the
* console.
*/
#ifndef CONFIG_DEBUG
# undef CONFIG_NET_DUMPPACKET
#endif
#ifdef CONFIG_NET_DUMPPACKET
# define lpc17_dumppacket(m,a,n) lib_dumpbuffer(m,a,n)
#else
# define lpc17_dumppacket(m,a,n)
#endif
/* Timing *******************************************************************/
/* TX poll deley = 1 seconds. CLK_TCK is the number of clock ticks per second */
#define LPC17_WDDELAY (1*CLK_TCK)
@ -116,15 +140,22 @@
#define LPC17_TXTIMEOUT (60*CLK_TCK)
/* Interrupts */
/* Interrupts ***************************************************************/
#define ETH_RXINTS (ETH_INT_RXOVR | ETH_INT_RXERR | ETH_INT_RXFIN | ETH_INT_RXDONE)
#define ETH_TXINTS (ETH_INT_TXUNR | ETH_INT_TXERR | ETH_INT_TXFIN | ETH_INT_TXDONE)
/* Misc. Helpers ***********************************************************/
/* This is a helper pointer for accessing the contents of the Ethernet header */
#define BUF ((struct uip_eth_hdr *)priv->lp_dev.d_buf)
/* This is the number of ethernet GPIO pins that must be configured */
#define GPIO_NENET_PINS 10
/* PHYs *********************************************************************/
/* Select PHY-specific values. Add more PHYs as needed. */
#ifdef CONFIG_PHY_KS8721
@ -168,10 +199,7 @@
# endif
#endif
/* This is the number of ethernet GPIO pins that must be configured */
#define GPIO_NENET_PINS 10
/* Descriptors **************************************************************/
/* EMAC DMA RAM and descriptor definitions. The configured number of
* descriptors will determine the organization and the size of the
* descriptor and status tables. There is a complex interaction between
@ -291,12 +319,6 @@
# error "Packet memory overlaps descriptor tables"
#endif
/* Register debug -- can only happen of CONFIG_DEBUG is selected */
#ifndef CONFIG_DEBUG
# undef CONFIG_NET_REGDEBUG
#endif
/****************************************************************************
* Private Types
****************************************************************************/
@ -672,9 +694,11 @@ static int lpc17_transmit(struct lpc17_driver_s *priv)
DEBUGASSERT(lpc17_txdesc(priv) == OK);
/* Increment statistics */
/* Increment statistics and dump the packet *if so configured) */
EMAC_STAT(priv, tx_packets);
lpc17_dumppacket("Transmit packet",
priv->lp_dev.d_buf, priv->lp_dev.d_len);
/* Get the current producer index */
@ -929,6 +953,9 @@ static void lpc17_rxdone(struct lpc17_driver_s *priv)
memcpy(priv->lp_dev.d_buf, rxbuffer, pktlen);
priv->lp_dev.d_len = pktlen;
lpc17_dumppacket("Received packet",
priv->ld_dev.d_buf, priv->ld_dev.d_len);
/* We only accept IP packets of the configured type and ARP packets */
#ifdef CONFIG_NET_IPv6
@ -1151,7 +1178,6 @@ static int lpc17_interrupt(int irq, void *context)
# warning "Missing logic"
}
#endif
}
return OK;
@ -1367,11 +1393,30 @@ static int lpc17_ifup(struct uip_driver_s *dev)
lpc17_putreg(ETH_RXINTS, LPC17_ETH_INTEN);
#endif
/* Enable Rx */
regval = lpc17_getreg(LPC17_ETH_CMD);
regval |= ETH_CMD_RXEN;
lpc17_putreg(regval, LPC17_ETH_CMD);
regval = lpc17_getreg(LPC17_ETH_MAC1);
regval |= ETH_MAC1_RE;
lpc17_putreg(regval, LPC17_ETH_MAC1);
/* Enable Tx */
regval = lpc17_getreg(LPC17_ETH_CMD);
regval |= ETH_CMD_TXEN;
lpc17_putreg(regval, LPC17_ETH_CMD);
/* Set and activate a timer process */
(void)wd_start(priv->lp_txpoll, LPC17_WDDELAY, lpc17_polltimer, 1, (uint32_t)priv);
(void)wd_start(priv->lp_txpoll, LPC17_WDDELAY, lpc17_polltimer, 1,
(uint32_t)priv);
/* Finally, enable the Ethernet interrupt at the interrupt controller */
/* Finally, make the interface up and enable the Ethernet interrupt at
* the interrupt controller
*/
priv->lp_ifup = true;
#if CONFIG_LPC17_NINTERFACES > 1
@ -1573,13 +1618,13 @@ static void lpc17_showpins(void)
static void lpc17_showmii(uint8_t phyaddr, const char *msg)
{
dbg("PHY " LPC17_PHYNAME ": %s\n", msg);
dbg(" MCR: %04x\n", lpc17_getreg(MII_MCR));
dbg(" MSR: %04x\n", lpc17_getreg(MII_MSR));
dbg(" ADVERTISE: %04x\n", lpc17_getreg(MII_ADVERTISE));
dbg(" LPA: %04x\n", lpc17_getreg(MII_LPA));
dbg(" EXPANSION: %04x\n", lpc17_getreg(MII_EXPANSION));
dbg(" MCR: %04x\n", lpc17_phyread(phyaddr, MII_MCR));
dbg(" MSR: %04x\n", lpc17_phyread(phyaddr, MII_MSR));
dbg(" ADVERTISE: %04x\n", lpc17_phyread(phyaddr, MII_ADVERTISE));
dbg(" LPA: %04x\n", lpc17_phyread(phyaddr, MII_LPA));
dbg(" EXPANSION: %04x\n", lpc17_phyread(phyaddr, MII_EXPANSION));
#ifdef CONFIG_PHY_KS8721
dbg(" 10BTCR: %04x\n", lpc17_getreg(MII_KS8721_10BTCR));
dbg(" 10BTCR: %04x\n", lpc17_phyread(phyaddr, MII_KS8721_10BTCR));
#endif
}
#endif
@ -2106,9 +2151,9 @@ static inline void lpc17_rxdescinit(struct lpc17_driver_s *priv)
*rxstat++ = 0;
}
/* Point to first Tx descriptor */
/* Point to first Rx descriptor */
lpc17_putreg(0, LPC17_ETH_RXPRODIDX);
lpc17_putreg(0, LPC17_ETH_RXCONSIDX);
}
/****************************************************************************

View File

@ -298,6 +298,8 @@ mbed Configuration Options
CONFIG_NET_WOL - Enable Wake-up on Lan (not fully implemented).
CONFIG_NET_REGDEBUG - Enabled low level register debug. Also needs
CONFIG_DEBUG.
CONFIG_NET_DUMPPACKET - Dump all received and transmitted packets.
Also needs CONFIG_DEBUG.
CONFIG_NET_BROADCAST - Enable receipt of broadcast frames
CONFIG_NET_HASH - Enable receipt of near-perfect match frames.
CONFIG_NET_MULTICAST - Enable receipt of multicast (and unicast) frames.

View File

@ -249,7 +249,7 @@ LEDs
#define LED_INIRQ 4 /* NC NC ON (momentary) */
#define LED_SIGNAL 5 /* NC NC ON (momentary) */
#define LED_ASSERTION 6 /* NC NC ON (momentary) */
#define LED_PANIC 7 /* NC NC ON (1Hz flashing) */
#define LED_PANIC 7 /* NC NC ON (0.5Hz flashing) */
After the system is booted, this logic will no longer use LEDs 1 and 2. They
are then available for use the application software using lpc17_led1() and
@ -410,6 +410,8 @@ Nucleus 2G Configuration Options
CONFIG_NET_WOL - Enable Wake-up on Lan (not fully implemented).
CONFIG_NET_REGDEBUG - Enabled low level register debug. Also needs
CONFIG_DEBUG.
CONFIG_NET_DUMPPACKET - Dump all received and transmitted packets.
Also needs CONFIG_DEBUG.
CONFIG_NET_BROADCAST - Enable receipt of broadcast frames
CONFIG_NET_HASH - Enable receipt of near-perfect match frames.
CONFIG_NET_MULTICAST - Enable receipt of multicast (and unicast) frames.

View File

@ -293,7 +293,7 @@ LEDs
- ON/OFF toggles means that various events are happening.
- GLowing: LED2 is turned on and off on every interrupt so even timer interrupts
should cause LED2 to glow faintly in the normal case.
- Flashing. If the LED2 is flashing at about 1Hz, that means that a crash
- Flashing. If the LED2 is flashing at about 0.5Hz, that means that a crash
has occurred. If CONFIG_ARCH_STACKDUMP=y, you will get some diagnostic
information on the console to help debug what happened.
@ -616,6 +616,8 @@ Olimex LPC1766-STK Configuration Options
CONFIG_NET_WOL - Enable Wake-up on Lan (not fully implemented).
CONFIG_NET_REGDEBUG - Enabled low level register debug. Also needs
CONFIG_DEBUG.
CONFIG_NET_DUMPPACKET - Dump all received and transmitted packets.
Also needs CONFIG_DEBUG.
CONFIG_NET_BROADCAST - Enable receipt of broadcast frames
CONFIG_NET_HASH - Enable receipt of near-perfect match frames.
CONFIG_NET_MULTICAST - Enable receipt of multicast (and unicast) frames.

View File

@ -76,7 +76,7 @@ CONFIG_ARCH_CHIP=lpc17xx
CONFIG_ARCH_CHIP_LPC1766=y
CONFIG_ARCH_BOARD=olimex-lpc1766stk
CONFIG_ARCH_BOARD_LPC1766STK=y
CONFIG_BOARD_LOOPSPERMSEC=7982
CONFIG_BOARD_LOOPSPERMSEC=8111
CONFIG_DRAM_SIZE=(32*1024)
CONFIG_DRAM_START=0x10000000
CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
@ -195,6 +195,8 @@ CONFIG_UART3_2STOP=0
# CONFIG_NET_WOL - Enable Wake-up on Lan (not fully implemented).
# CONFIG_NET_REGDEBUG - Enabled low level register debug. Also needs
# CONFIG_DEBUG.
# CONFIG_NET_DUMPPACKET - Dump all received and transmitted packets.
# Also needs CONFIG_DEBUG.
# CONFIG_NET_BROADCAST - Enable receipt of broadcast frames
# CONFIG_NET_HASH - Enable receipt of near-perfect match frames.
# CONFIG_NET_MULTICAST - Enable receipt of multicast (and unicast) frames.

View File

@ -76,7 +76,7 @@ CONFIG_ARCH_CHIP=lpc17xx
CONFIG_ARCH_CHIP_LPC1766=y
CONFIG_ARCH_BOARD=olimex-lpc1766stk
CONFIG_ARCH_BOARD_LPC1766STK=y
CONFIG_BOARD_LOOPSPERMSEC=7982
CONFIG_BOARD_LOOPSPERMSEC=8111
CONFIG_DRAM_SIZE=(32*1024)
CONFIG_DRAM_START=0x10000000
CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)

View File

@ -76,7 +76,7 @@ CONFIG_ARCH_CHIP=lpc17xx
CONFIG_ARCH_CHIP_LPC1766=y
CONFIG_ARCH_BOARD=olimex-lpc1766stk
CONFIG_ARCH_BOARD_LPC1766STK=y
CONFIG_BOARD_LOOPSPERMSEC=7982
CONFIG_BOARD_LOOPSPERMSEC=8111
CONFIG_DRAM_SIZE=(32*1024)
CONFIG_DRAM_START=0x10000000
CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)

View File

@ -76,7 +76,7 @@ CONFIG_ARCH_CHIP=lpc17xx
CONFIG_ARCH_CHIP_LPC1766=y
CONFIG_ARCH_BOARD=olimex-lpc1766stk
CONFIG_ARCH_BOARD_LPC1766STK=y
CONFIG_BOARD_LOOPSPERMSEC=7982
CONFIG_BOARD_LOOPSPERMSEC=8111
CONFIG_DRAM_SIZE=(32*1024)
CONFIG_DRAM_START=0x10000000
CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)

View File

@ -76,7 +76,7 @@ CONFIG_ARCH_CHIP=lpc17xx
CONFIG_ARCH_CHIP_LPC1766=y
CONFIG_ARCH_BOARD=olimex-lpc1766stk
CONFIG_ARCH_BOARD_LPC1766STK=y
CONFIG_BOARD_LOOPSPERMSEC=7982
CONFIG_BOARD_LOOPSPERMSEC=8111
CONFIG_DRAM_SIZE=(32*1024)
CONFIG_DRAM_START=0x10000000
CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)

View File

@ -1,7 +1,7 @@
/****************************************************************************
* examples/nettest/nettest.c
*
* Copyright (C) 2007, 2009 Gregory Nutt. All rights reserved.
* Copyright (C) 2007, 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
@ -81,7 +81,7 @@ void user_initialize(void)
int user_start(int argc, char *argv[])
{
struct in_addr addr;
#if defined(CONFIG_EXAMPLE_NETTEST_NOMAC)
#ifdef CONFIG_EXAMPLE_NETTEST_NOMAC
uint8_t mac[IFHWADDRLEN];
#endif