Add support for LPCXpresso OLED
git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@3518 7fd9a85b-ad96-42d3-883c-3090e2eb8679
This commit is contained in:
patacongo
parent
c045fa803b
commit
b8a71f238e
|
|
@ -2,7 +2,7 @@
|
|||
* config/lm3s6965-ek/src/up_oled.c
|
||||
* arch/arm/src/board/up_oled.c
|
||||
*
|
||||
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
* Copyright (C) 2010-2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
|
|
@ -88,7 +88,7 @@
|
|||
* Name: up_nxdrvinit
|
||||
*
|
||||
* Description:
|
||||
* Called NX initialization logic to configure the OLED.
|
||||
* Called by NX initialization logic to configure the OLED.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
|
|
|
|||
|
|
@ -29,10 +29,10 @@ LCPXpresso LPC1768 Board
|
|||
P0[3]/RXD0/AD0[6] J6-22
|
||||
P0[4]/I2SRX-CLK/RD2/CAP2.0 J6-38 CAN_RX2
|
||||
P0[5]/I2SRX-WS/TD2/CAP2.1 J6-39 CAN_TX2
|
||||
P0[6]/I2SRX_SDA/SSEL1/MAT2[0] J6-8 SSEL1
|
||||
P0[7]/I2STX_CLK/SCK1/MAT2[1] J6-7 SCK1
|
||||
P0[6]/I2SRX_SDA/SSEL1/MAT2[0] J6-8 SSEL1, OLED CS
|
||||
P0[7]/I2STX_CLK/SCK1/MAT2[1] J6-7 SCK1, OLED SCK
|
||||
P0[8]/I2STX_WS/MISO1/MAT2[2] J6-6 MISO1
|
||||
P0[9]/I2STX_SDA/MOSI1/MAT2[3] J6-5 MOSI1
|
||||
P0[9]/I2STX_SDA/MOSI1/MAT2[3] J6-5 MOSI1, OLED data in
|
||||
P0[10] J6-40 TXD2/SDA2
|
||||
P0[11] J6-41 RXD2/SCL2
|
||||
P0[15]/TXD1/SCK0/SCK J6-13 TXD1/SCK0
|
||||
|
|
@ -84,7 +84,7 @@ LCPXpresso LPC1768 Board
|
|||
P2[4]/PWM1.5/DSR1/TRACEDATA[1] J6-46 PWM1.5
|
||||
P2[5]/PWM1[6]/DTR1/TRACEDATA[0] J6-47 PWM1.6
|
||||
P2[6]/PCAP1[0]/RI1/TRACECLK J6-48
|
||||
P2[7]/RD2/RTS1 J6-49
|
||||
P2[7]/RD2/RTS1 J6-49 OLED command/data
|
||||
P2[8]/TD2/TXD2 J6-50
|
||||
P2[9]/USB_CONNECT/RXD2 PAD19 USB Pullup N/A
|
||||
P2[10]/EINT0/NMI J6-51
|
||||
|
|
@ -126,8 +126,8 @@ SD Slot
|
|||
*J55 must be set to provide chip select PIO1_11 signal as the SD slot
|
||||
chip select.
|
||||
|
||||
USB Device
|
||||
----------
|
||||
USB Device
|
||||
----------
|
||||
|
||||
Base-board J4/J6 LPC1768
|
||||
Signal Pin Pin
|
||||
|
|
@ -160,6 +160,65 @@ SD Slot
|
|||
|
||||
*P2.9 Connect to a transistor driven USB-D+ pullup on the LPCXpresso board.
|
||||
|
||||
96x64 White OLED with I2C/SPI interface
|
||||
---------------------------------------
|
||||
The OLED display can be connected either to the SPI-bus or the I2C-bus.
|
||||
|
||||
Jumper Settings:
|
||||
|
||||
- For the SPI interface (default), insert jumpers in J42, J43, J45 pin1-2
|
||||
and J46 pin 1-2.
|
||||
- For I2C interface, insert jumpers in J45 pin 2-3, J46 pin 2-3 and J47.
|
||||
|
||||
In either case insert a jumper in J44 in order to allow PIO1_10 to control
|
||||
the OLED-voltage.
|
||||
|
||||
Jumper Signal Control:
|
||||
|
||||
J42: Short: SPI Open: I2C (Default: inserted)
|
||||
|
||||
J44: Allow control of OLED voltage (Default: inserted)
|
||||
|
||||
PIO1_10-------->J44 ---------->FAN5331
|
||||
|
||||
Common Reset:
|
||||
|
||||
PIO0_0-RESET ---------------> RES#
|
||||
|
||||
J43: Select OLED chip select
|
||||
J58: For embed (Default: not inserted)
|
||||
|
||||
PIO0_2--------------->J43 ---->CS#
|
||||
PIO2_7--------->J58 ->J43 ---->D/C#
|
||||
PIO0_8-MISO --------^
|
||||
|
||||
J45: Select SPI or I2C clock (Default: SPI clock)
|
||||
|
||||
PIO2_11-SCK---->J45 ----------> D0
|
||||
PIO0_4-SCL------------^
|
||||
|
||||
J46: Select serial data input (Default: SPI MOSI)
|
||||
|
||||
PIO0_9-MOSI---->J46 ----------> D1
|
||||
I2C_SDA---------------^
|
||||
|
||||
J47: Allow I2C bi-directional communications (Default: SPI unidirectional)
|
||||
|
||||
PIO0_5-SDA---->J47 ----------> D2
|
||||
|
||||
LPCXpresso Signals
|
||||
|
||||
----------------------------+-------+-------------- ----------------------------------------
|
||||
LPC1758 Pin | J4/6 | Base Board Description
|
||||
----------------------------+-------+-------------- ----------------------------------------
|
||||
P2.1/PWM1.2/RXD1 | 43 | PIO1_10 FAN5331 Power Control (SHDN#)
|
||||
RESET_N | 4 | PIO0_0-RESET OLED reset (RES#) -- Resets EVERYTHING
|
||||
P0.6/I2SRX-SDA/SSEL1/MAT2.0 | 8 | PIO0_2 OLED chip select (CS#)
|
||||
P2.7/RD2/RTS1 | 49 | PIO2_7 OLED command/data (D/C#)
|
||||
P0.7/I2STX-CLK/SCK1/MAT2.1 | 7 | PIO2_11-SCK OLED clock (D0)
|
||||
P0.9/I2STX-SDA/MOSI1/MAT2.3 | 5 | PIO0_9-MOSI OLED data in (D1)
|
||||
----------------------------+-------+-------------- ----------------------------------------
|
||||
|
||||
Development Environment
|
||||
^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
|
|
|
|||
|
|
@ -151,10 +151,10 @@
|
|||
* P0[3]/RXD0/AD0[6] J6-22
|
||||
* P0[4]/I2SRX-CLK/RD2/CAP2.0 J6-38 CAN_RX2
|
||||
* P0[5]/I2SRX-WS/TD2/CAP2.1 J6-39 CAN_TX2
|
||||
* P0[6]/I2SRX_SDA/SSEL1/MAT2[0] J6-8 SSEL1
|
||||
* P0[7]/I2STX_CLK/SCK1/MAT2[1] J6-7 SCK1
|
||||
* P0[6]/I2SRX_SDA/SSEL1/MAT2[0] J6-8 SSEL1, OLED CS
|
||||
* P0[7]/I2STX_CLK/SCK1/MAT2[1] J6-7 SCK1, OLED SCK
|
||||
* P0[8]/I2STX_WS/MISO1/MAT2[2] J6-6 MISO1
|
||||
* P0[9]/I2STX_SDA/MOSI1/MAT2[3] J6-5 MOSI1
|
||||
* P0[9]/I2STX_SDA/MOSI1/MAT2[3] J6-5 MOSI1, OLED data in
|
||||
* P0[10] J6-40 TXD2/SDA2
|
||||
* P0[11] J6-41 RXD2/SCL2
|
||||
* P0[15]/TXD1/SCK0/SCK J6-13 TXD1/SCK0
|
||||
|
|
@ -219,13 +219,13 @@
|
|||
#define GPIO_ENET_MDIO GPIO_ENET_MDIO_1
|
||||
|
||||
/* P2[0]/PWM1.1/TXD1 J6-42 PWM1.1 / RGB LED / RS422 RX
|
||||
* P2[1]/PWM1.2/RXD1 J6-43 PWM1.2 / RGB LED / RS422 RX
|
||||
* P2[1]/PWM1.2/RXD1 J6-43 PWM1.2 / OLED voltage / RGB LED / RS422 RX
|
||||
* P2[2]/PWM1.3/CTS1/TRACEDATA[3] J6-44 PWM1.3
|
||||
* P2[3]/PWM1.4/DCD1/TRACEDATA[2] J6-45 PWM1.4
|
||||
* P2[4]/PWM1.5/DSR1/TRACEDATA[1] J6-46 PWM1.5
|
||||
* P2[5]/PWM1[6]/DTR1/TRACEDATA[0] J6-47 PWM1.6
|
||||
* P2[6]/PCAP1[0]/RI1/TRACECLK J6-48
|
||||
* P2[7]/RD2/RTS1 J6-49
|
||||
* P2[7]/RD2/RTS1 J6-49 OLED command/data
|
||||
* P2[8]/TD2/TXD2 J6-50
|
||||
* P2[9]/USB_CONNECT/RXD2 PAD19 USB Pullup N/A
|
||||
* P2[10]/EINT0/NMI J6-51
|
||||
|
|
|
|||
|
|
@ -44,6 +44,10 @@ ifeq ($(CONFIG_NSH_ARCHINIT),y)
|
|||
CSRCS += up_nsh.c
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_NX_LCDDRIVER),y)
|
||||
CSRCS += up_oled.c
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_USBSTRG),y)
|
||||
CSRCS += up_usbstrg.c
|
||||
endif
|
||||
|
|
|
|||
|
|
@ -147,11 +147,11 @@
|
|||
* CD PIO2_10 52 P2.11 (See LPCXPRESSO_SD_CD)
|
||||
*/
|
||||
|
||||
#define LPCXPRESSO_SD_CS (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT2 | GPIO_PIN2)
|
||||
#define LPCXPRESSO_SD_CS (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT2 | GPIO_PIN2)
|
||||
#ifdef CONFIG_GPIO_IRQ
|
||||
# define LPCXPRESSO_SD_CD (GPIO_INTBOTH | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN11)
|
||||
# define LPCXPRESSO_SD_CD (GPIO_INTBOTH | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN11)
|
||||
#else
|
||||
# define LPCXPRESSO_SD_CD (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN11)
|
||||
# define LPCXPRESSO_SD_CD (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN11)
|
||||
#endif
|
||||
|
||||
/* USB:
|
||||
|
|
@ -179,13 +179,30 @@
|
|||
* - The standard USB LED (P1.18) is not connected.
|
||||
*/
|
||||
|
||||
#define LPCXPRESSO_USB_CONNECT (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT0 | GPIO_PIN21)
|
||||
#define LPCXPRESSO_USB_CONNECT (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT0 | GPIO_PIN21)
|
||||
#ifdef CONFIG_GPIO_IRQ
|
||||
# define LPCXPRESSO_USB_VBUSSENSE (GPIO_INTBOTH | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN5)
|
||||
# define LPCXPRESSO_USB_VBUSSENSE (GPIO_INTBOTH | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN5)
|
||||
#else
|
||||
# define LPCXPRESSO_USB_VBUSSENSE (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN5)
|
||||
# define LPCXPRESSO_USB_VBUSSENSE (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN5)
|
||||
#endif
|
||||
|
||||
/* 96x64 White OLED with I2C/SPI interface
|
||||
*
|
||||
* ----------------------------+-------+-------------- -----------------------------
|
||||
* LPC1758 Pin | J4/6 | Base Board Description
|
||||
* ----------------------------+-------+-------------- -----------------------------
|
||||
* P2.1/PWM1.2/RXD1 | 43 | PIO1_10 FAN5331 Power Control (SHDN#)
|
||||
* P0.6/I2SRX-SDA/SSEL1/MAT2.0 | 8 | PIO0_2 OLED chip select (CS#)
|
||||
* P2.7/RD2/RTS1 | 49 | PIO2_7 OLED command/data (D/C#)
|
||||
* P0.7/I2STX-CLK/SCK1/MAT2.1 | 7 | PIO2_11-SCK OLED clock (D0)
|
||||
* P0.9/I2STX-SDA/MOSI1/MAT2.3 | 5 | PIO0_9-MOSI OLED data in (D1)
|
||||
* ----------------------------+-------+-------------- -----------------------------
|
||||
*/
|
||||
|
||||
#define LPCXPRESSO_OLED_POWER (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT2 | GPIO_PIN1)
|
||||
#define LPCXPRESSO_OLED_CS (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT0 | GPIO_PIN6)
|
||||
#define LPCXPRESSO_OLED_DC (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT2 | GPIO_PIN7)
|
||||
|
||||
/************************************************************************************
|
||||
* Public Types
|
||||
************************************************************************************/
|
||||
|
|
|
|||
|
|
@ -0,0 +1,183 @@
|
|||
/****************************************************************************
|
||||
* config/lpcxpresso-lpc1768/src/up_oled.c
|
||||
* arch/arm/src/board/up_oled.c
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdio.h>
|
||||
#include <debug.h>
|
||||
#include <errno.h>
|
||||
|
||||
#include <nuttx/spi.h>
|
||||
#include <nuttx/lcd/lcd.h>
|
||||
#include <nuttx/lcd/p14201.h>
|
||||
|
||||
#include "lpc17_internal.h"
|
||||
#include "lpcxpresso_internal.h"
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-Processor Definitions
|
||||
****************************************************************************/
|
||||
/* Configuration ************************************************************/
|
||||
/* This module is only built if CONFIG_NX_LCDDRIVER is selected. In this
|
||||
* case, it would be an error if SSP1 is not also enabled.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_LPC17_SSP1
|
||||
# error "The OLED driver required CONFIG_LPC17_SSP1 in the configuration"
|
||||
#endif
|
||||
|
||||
/* Debug ********************************************************************/
|
||||
/* Define the CONFIG_LCD_RITDEBUG to enable detailed debug output (stuff you
|
||||
* would never want to see unless you are debugging this file).
|
||||
*
|
||||
* Verbose debug must also be enabled
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_DEBUG
|
||||
# undef CONFIG_DEBUG_VERBOSE
|
||||
# undef CONFIG_DEBUG_GRAPHICS
|
||||
#endif
|
||||
|
||||
#ifndef CONFIG_DEBUG_VERBOSE
|
||||
# undef CONFIG_LCD_RITDEBUG
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_LCD_RITDEBUG
|
||||
# define ritdbg(format, arg...) vdbg(format, ##arg)
|
||||
# define oleddc_dumpgpio(m) lm3s_dumpgpio(LPCXPRESSO_OLED_POWER, m)
|
||||
# define oledcs_dumpgpio(m) lm3s_dumpgpio(LPCXPRESSO_OLED_CS, m)
|
||||
#else
|
||||
# define ritdbg(x...)
|
||||
# define oleddc_dumpgpio(m)
|
||||
# define oledcs_dumpgpio(m)
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_nxdrvinit
|
||||
*
|
||||
* Description:
|
||||
* Called by NX initialization logic to configure the OLED.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
FAR struct lcd_dev_s *up_nxdrvinit(unsigned int devno)
|
||||
{
|
||||
FAR struct spi_dev_s *spi;
|
||||
FAR struct lcd_dev_s *dev;
|
||||
|
||||
/* Configure the OLED GPIOs. For the SPI interface, insert jumpers in J42,
|
||||
* J43, J45 pin1-2 and J46 pin 1-2.
|
||||
*/
|
||||
|
||||
oledcs_dumpgpio("up_nxdrvinit: After OLED CS setup");
|
||||
oleddc_dumpgpio("up_nxdrvinit: On entry");
|
||||
|
||||
(void)lpc17_configgpio(LPCXPRESSO_OLED_POWER); /* OLED 11V power */
|
||||
(void)lpc17_configgpio(LPCXPRESSO_OLED_DC); /* OLED Command/Data */
|
||||
|
||||
oleddc_dumpgpio("up_nxdrvinit: After OLED Power/DC setup");
|
||||
|
||||
/* Get the SSI port (configure as a Freescale SPI port) */
|
||||
|
||||
spi = up_spiinitialize(1);
|
||||
if (!spi)
|
||||
{
|
||||
glldbg("Failed to initialize SSI port 1\n");
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Bind the SSI port to the OLED */
|
||||
|
||||
dev = rit_initialize(spi, devno);
|
||||
if (!dev)
|
||||
{
|
||||
glldbg("Failed to bind SSI port 1 to OLED %d: %d\n", devno);
|
||||
}
|
||||
else
|
||||
{
|
||||
gllvdbg("Bound SSI port 1 to OLED %d\n", devno);
|
||||
|
||||
/* And turn the OLED on (CONFIG_LCD_MAXPOWER should be 1) */
|
||||
|
||||
(void)dev->setpower(dev, CONFIG_LCD_MAXPOWER);
|
||||
return dev;
|
||||
}
|
||||
}
|
||||
return NULL;
|
||||
}
|
||||
|
||||
/******************************************************************************
|
||||
* Name: lm3s_spicmddata
|
||||
*
|
||||
* Description:
|
||||
* Set or clear the SD1329 D/Cn bit to select data (true) or command
|
||||
* (false). This function must be provided by platform-specific logic.
|
||||
* This is an implementation of the cmddata method of the SPI
|
||||
* interface defined by struct spi_ops_s (see include/nuttx/spi.h).
|
||||
*
|
||||
* Input Parameters:
|
||||
*
|
||||
* spi - SPI device that controls the bus the device that requires the CMD/
|
||||
* DATA selection.
|
||||
* devid - If there are multiple devices on the bus, this selects which one
|
||||
* to select cmd or data. NOTE: This design restricts, for example,
|
||||
* one one SPI display per SPI bus.
|
||||
* cmd - true: select command; false: select data
|
||||
*
|
||||
* Returned Value:
|
||||
* None
|
||||
*
|
||||
******************************************************************************/
|
||||
|
||||
int lm3s_spicmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd)
|
||||
{
|
||||
if (devid == SPIDEV_DISPLAY)
|
||||
{
|
||||
/* Set GPIO to 1 for data, 0 for command */
|
||||
|
||||
lm3s_gpiowrite(OLEDDC_GPIO, !cmd);
|
||||
return OK;
|
||||
}
|
||||
return -ENODEV;
|
||||
}
|
||||
|
|
@ -115,6 +115,14 @@ void weak_function lpc17_sspinitialize(void)
|
|||
#ifdef CONFIG_LPC17_SSP1
|
||||
(void)lpc17_configgpio(LPCXPRESSO_SD_CS);
|
||||
(void)lpc17_configgpio(LPCXPRESSO_SD_CD);
|
||||
|
||||
/* Configure chip select for the OLED. For the SPI interface, insert jumpers in
|
||||
* J42, J43, J45 pin1-2 and J46 pin 1-2.
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_NX_LCDDRIVER
|
||||
(void)lpc17_configgpio(LPCXPRESSO_OLED_CS);
|
||||
#endif
|
||||
#endif
|
||||
|
||||
ssp_dumpgpio("lpc17_sspinitialize() Exit");
|
||||
|
|
@ -175,7 +183,14 @@ void lpc17_ssp1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool sel
|
|||
|
||||
(void)lpc17_gpiowrite(LPCXPRESSO_SD_CS, !selected);
|
||||
}
|
||||
#ifdef CONFIG_NX_LCDDRIVER
|
||||
else if (devid == SPIDEV_DISPLAY)
|
||||
{
|
||||
/* Assert the CS pin to the OLED display */
|
||||
|
||||
(void)lpc17_gpiowrite(LPCXPRESSO_OLED_CS, !selected);
|
||||
}
|
||||
#endif
|
||||
ssp_dumpgpio("lpc17_spi1select() Exit");
|
||||
}
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue