From a36f33adf2af3a3d158549a920b417352c8be275 Mon Sep 17 00:00:00 2001 From: patacongo Date: Sun, 2 May 2010 21:58:00 +0000 Subject: [PATCH] Add XTI support git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@2645 7fd9a85b-ad96-42d3-883c-3090e2eb8679 --- nuttx/ChangeLog | 4 + nuttx/Documentation/NuttX.html | 6 +- nuttx/arch/arm/include/str71x/irq.h | 92 ++++--- nuttx/arch/arm/src/str71x/Make.defs | 3 + nuttx/arch/arm/src/str71x/str71x_internal.h | 32 +++ nuttx/arch/arm/src/str71x/str71x_xti.c | 230 ++++++++++++++++++ nuttx/arch/arm/src/str71x/str71x_xti.h | 2 +- .../configs/olimex-strp711/nettest/defconfig | 2 +- .../configs/olimex-strp711/src/up_enc28j60.c | 30 ++- 9 files changed, 360 insertions(+), 41 deletions(-) create mode 100755 nuttx/arch/arm/src/str71x/str71x_xti.c diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog index eabff844e..e8906495c 100644 --- a/nuttx/ChangeLog +++ b/nuttx/ChangeLog @@ -1104,4 +1104,8 @@ * configs/olimex-str7p11/nettest - examples/nettest configuration using the ENC28J60 driver on the Olimex STMicro STR-P711. (unverified on original check-in) + * configs/olimex-str7p11/src/up_enc28j60.c - Add ENC28J60 initialization + logic. + * arch/arm/src/str7x/str7x_xti.c - Add basic XTI support (external + interrupts). diff --git a/nuttx/Documentation/NuttX.html b/nuttx/Documentation/NuttX.html index e86046858..63e59af74 100644 --- a/nuttx/Documentation/NuttX.html +++ b/nuttx/Documentation/NuttX.html @@ -8,7 +8,7 @@

NuttX RTOS

-

Last Updated: May 1, 2010

+

Last Updated: May 2, 2010

@@ -1686,6 +1686,10 @@ nuttx-5.5 2010-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr> * configs/olimex-str7p11/nettest - examples/nettest configuration using the ENC28J60 driver on the Olimex STMicro STR-P711. (unverified on original check-in) + * configs/olimex-str7p11/src/up_enc28j60.c - Add ENC28J60 initialization + logic. + * arch/arm/src/str7x/str7x_xti.c - Add basic XTI support (external + interrupts). pascal-2.1 2010-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr> diff --git a/nuttx/arch/arm/include/str71x/irq.h b/nuttx/arch/arm/include/str71x/irq.h index 137dab715..bac58bb2a 100644 --- a/nuttx/arch/arm/include/str71x/irq.h +++ b/nuttx/arch/arm/include/str71x/irq.h @@ -1,7 +1,7 @@ /************************************************************************************ * arch/arm/include/str71x/irq.h * - * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. + * Copyright (C) 2008-2010 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without @@ -52,36 +52,68 @@ /* IRQ channels */ -#define STR71X_IRQ_T0TIMI (0) -#define STR71X_IRQ_FLASH (1) -#define STR71X_IRQ_RCCU (2) -#define STR71X_IRQ_RTC (3) -#define STR71X_IRQ_WDG (4) -#define STR71X_IRQ_XTI (5) -#define STR71X_IRQ_USBHP (6) -#define STR71X_IRQ_I2C0ITERR (7) -#define STR71X_IRQ_I2C1ITERR (8) -#define STR71X_IRQ_UART0 (9) -#define STR71X_IRQ_UART1 (10) -#define STR71X_IRQ_UART2 (11) -#define STR71X_IRQ_UART3 (12) -#define STR71X_IRQ_SPI0 (13) -#define STR71X_IRQ_SPI1 (14) -#define STR71X_IRQ_I2C0 (15) -#define STR71X_IRQ_I2C1 (16) -#define STR71X_IRQ_CAN (17) -#define STR71X_IRQ_ADC (18) -#define STR71X_IRQ_T1TIMI (19) -#define STR71X_IRQ_T2TIMI (20) -#define STR71X_IRQ_T3TIMI (21) -#define STR71X_IRQ_HDLC (25) -#define STR71X_IRQ_USBLP (26) -#define STR71X_IRQ_T0TOI (29) -#define STR71X_IRQ_T0OC1 (30) -#define STR71X_IRQ_T0OC2 (31) +#define STR71X_IRQ_T0TIMI (0) /* IRQ 0: T0.EFTI Timer 0 global interrupt */ +#define STR71X_IRQ_FLASH (1) /* IRQ 1: FLASH FLASH global interrupt */ +#define STR71X_IRQ_RCCU (2) /* IRQ 2: PRCCU PRCCU global interrupt */ +#define STR71X_IRQ_RTC (3) /* IRQ 3: RTC Real Time Clock global interrupt */ +#define STR71X_IRQ_WDG (4) /* IRQ 4: WDG.IRQ Watchdog timer interrupt */ +#define STR71X_IRQ_XTI (5) /* IRQ 5: XTI.IRQ XTI external interrupt */ +#define STR71X_IRQ_USBHP (6) /* IRQ 6: USB.HPIRQ USB high priority event interrupt */ +#define STR71X_IRQ_I2C0ITERR (7) /* IRQ 7: I2C0.ITERR I2C 0 error interrupt */ +#define STR71X_IRQ_I2C1ITERR (8) /* IRQ 8: I2C1.ITERR I2C 1 error interrupt */ +#define STR71X_IRQ_UART0 (9) /* IRQ 9: UART0.IRQ UART 0 global interrupt */ +#define STR71X_IRQ_UART1 (10) /* IRQ 10: UART1.IRQ UART 1 global interrupt */ +#define STR71X_IRQ_UART2 (11) /* IRQ 11: UART2.IRQ UART 2 global interrupt */ +#define STR71X_IRQ_UART3 (12) /* IRQ 12: UART3.IRQ UART 3 global interrupt */ +#define STR71X_IRQ_SPI0 (13) /* IRQ 13: BSPI0.IRQ BSPI 0 global interrupt */ +#define STR71X_IRQ_SPI1 (14) /* IRQ 14: BSPI1.IRQ BSPI 1 global interrupt */ +#define STR71X_IRQ_I2C0 (15) /* IRQ 15: I2C0.IRQ I2C 0 tx/rx interrupt */ +#define STR71X_IRQ_I2C1 (16) /* IRQ 16: I2C1.IRQ I2C 1 tx/rx interrupt */ +#define STR71X_IRQ_CAN (17) /* IRQ 17: CAN.IRQ CAN module global interrupt */ +#define STR71X_IRQ_ADC (18) /* IRQ 18: ADC.IRQ ADC sample ready interrupt */ +#define STR71X_IRQ_T1TIMI (19) /* IRQ 19: T1.GI Timer 1 global interrupt */ +#define STR71X_IRQ_T2TIMI (20) /* IRQ 20: T2.GI Timer 2 global interrupt */ +#define STR71X_IRQ_T3TIMI (21) /* IRQ 21: T3.GI Timer 3 global interrupt */ + /* IRQ 22-24: Reserved */ +#define STR71X_IRQ_HDLC (25) /* IRQ 25: HDLC.IRQ HDLC global interrupt */ +#define STR71X_IRQ_USBLP (26) /* IRQ 26: USB.LPIRQ USB low priority event interrupt */ + /* IRQ 27-28: Reserved */ +#define STR71X_IRQ_T0TOI (29) /* IRQ 29: T0.TOI Timer 0 Overflow interrupt */ +#define STR71X_IRQ_T0OC1 (30) /* IRQ 30: T0.OCMPA Timer 0 Output Compare A interrupt */ +#define STR71X_IRQ_T0OC2 (31) /* IRQ 31: T0.OCMPB Timer 0 Output Compare B interrupt */ + +#define STR71X_NBASEIRQS (32) + +#ifdef CONFIG_STR71X_XTI +# define STR71X_IRQ_FIRSTXTI (32) +# define STR71X_IRQ_SW (32) /* Line 0: SW interrupt - no HW connection */ +# define STR71X_IRQ_USBWKUP (33) /* Line 1: USB wake-up event: generated while exiting + * from suspend mode */ +# define STR71X_IRQ_PORT2p8 (34) /* Line 2: Port 2.8 - External Interrupt */ +# define STR71X_IRQ_PORT2p9 (35) /* Line 3: Port 2.9 - External Interrupt */ +# define STR71X_IRQ_PORT2p10 (36) /* Line 4: Port 2.10 - External Interrupt */ +# define STR71X_IRQ_PORT2p11 (37) /* Line 5: Port 2.11 - External Interrupt */ +# define STR71X_IRQ_PORT1p11 (38) /* Line 6: Port 1.11 - CAN module receive pin (CANRX). */ +# define STR71X_IRQ_PORT1p13 (39) /* Line 7: Port 1.13 - HDLC clock (HCLK) or I2C.0 Clock + * (I0.SCL) */ +# define STR71X_IRQ_PORT1p14 (40) /* Line 8: Port 1.14 - HDLC receive pin (HRXD) or I2C.0 + * Data (SDA) */ +# define STR71X_IRQ_PORT0p1 (41) /* Line 9: Port 0.1 - BSPI0 Slave Input data (S0.MOSI) + * or UART3 Receive Data Input (U3.Rx) */ +# define STR71X_IRQ_PORT0p2 (42) /* Line 10: Port 0.2 - BSPI0 Slave Input serial clock + * (S0.SCLK) or I2C.1 Clock (I1.SCL) */ +# define STR71X_IRQ_PORT0p6 (43) /* Line 11: Port 0.6 - BSPI1 Slave Input serial clock + * (S1.SCLK) */ +# define STR71X_IRQ_PORT0p8 (44) /* Line 12: Port 0.8 - UART0 Receive Data Input (U0.Rx) */ +# define STR71X_IRQ_PORT0p10 (45) /* Line 13: Port 0.10 - UART1 Receive Data Input (U1.Rx) */ +# define STR71X_IRQ_PORT0p13 (46) /* Line 14: Port 0.13 - UART2 Receive Data Input (U2.Rx) */ +# define STR71X_IRQ_PORT0p15 (47) /* Line 15: Port 0.15 - WAKEUP pin or RTC ALARM */ +# define NR_IRQS (48) +#else +# define NR_IRQS (32) +#endif #define STR71X_IRQ_SYSTIMER STR71X_IRQ_T0TIMI -#define NR_IRQS 32 /* FIQ channels */ @@ -113,7 +145,7 @@ extern "C" { #ifdef __cplusplus } #endif -#endif +#endif /* __ASSEMBLY__ */ #endif /* __ARCH_ARM_INCLUDE_STR71X_IRQ_H */ diff --git a/nuttx/arch/arm/src/str71x/Make.defs b/nuttx/arch/arm/src/str71x/Make.defs index c6e0e23c4..4ca4edff4 100644 --- a/nuttx/arch/arm/src/str71x/Make.defs +++ b/nuttx/arch/arm/src/str71x/Make.defs @@ -54,4 +54,7 @@ CHIP_CSRCS = str71x_prccu.c str71x_lowputc.c str71x_decodeirq.c str71x_irq.c \ ifeq ($(CONFIG_USBDEV),y) CHIP_CSRCS += str71x_usbdev.c endif +ifeq ($(CONFIG_STR71X_XTI),y) +CHIP_CSRCS += str71x_xti.c +endif diff --git a/nuttx/arch/arm/src/str71x/str71x_internal.h b/nuttx/arch/arm/src/str71x/str71x_internal.h index 468c48600..6c8913376 100644 --- a/nuttx/arch/arm/src/str71x/str71x_internal.h +++ b/nuttx/arch/arm/src/str71x/str71x_internal.h @@ -42,6 +42,8 @@ #include +#include + #include /************************************************************************************ @@ -92,4 +94,34 @@ * Public Functions ************************************************************************************/ +/******************************************************************************** + * Name: str7x_xtiinitialize + * + * Description: + * Configure XTI for operation. Note that the lines are not used as wake-up + * sources in this implementation. Some extensions would be required for that + * capability. + * + ********************************************************************************/ + +#ifdef CONFIG_STR71X_XTI +extern int str7x_xtiinitialize(void); +#else +# define str7x_xtiinitialize() +#endif /* CONFIG_STR71X_XTI */ + +/******************************************************************************** + * Name: str7x_xticonfig + * + * Description: + * Configure an external line to provide interrupts. + * + ********************************************************************************/ + +#ifdef CONFIG_STR71X_XTI +extern int str7x_xticonfig(int irq, bool rising); +#else +# define str7x_xticonfig(irq,rising) +#endif /* CONFIG_STR71X_XTI */ + #endif /* __ARCH_ARM_SRC_STR71X_STR71X_INTERNAL_H */ diff --git a/nuttx/arch/arm/src/str71x/str71x_xti.c b/nuttx/arch/arm/src/str71x/str71x_xti.c new file mode 100755 index 000000000..e95e4349b --- /dev/null +++ b/nuttx/arch/arm/src/str71x/str71x_xti.c @@ -0,0 +1,230 @@ +/******************************************************************************** + * arch/arm/src/str71x/str71x_xti.c + * + * Copyright (C) 2010 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ********************************************************************************/ + +/******************************************************************************** + * Included Files + ********************************************************************************/ + +#include + +#include +#include +#include +#include +#include +#include + +#include + +#include "chip.h" +#include "up_arch.h" +#include "os_internal.h" +#include "up_internal.h" + +#ifdef CONFIG_STR71X_XTI + +/******************************************************************************** + * Pre-procesor Definitions + ********************************************************************************/ + +/******************************************************************************** + * Private Types + ********************************************************************************/ + +struct xtiregs_s +{ + uint32_t mr; /* Mask register */ + uint32_t tr; /* Trigger polarity register */ +}; + +/******************************************************************************** + * Public Data + ********************************************************************************/ + +static const struct xtiregs_s g_xtiregs[2] = +{ + { STR71X_XTI_MRL, STR71X_XTI_TRL }, + { STR71X_XTI_MRH, STR71X_XTI_TRH } +}; + +/******************************************************************************** + * Private Data + ********************************************************************************/ + +/******************************************************************************** + * Private Functions + ********************************************************************************/ + +static int str7x_xtiinterrupt(int irq, FAR void *context) +{ + uint16_t enabled = (uint16_t)getreg8(STR71X_XTI_MRH) << 8 | + (uint16_t)getreg8(STR71X_XTI_MRL); + uint16_t pending = (uint16_t)getreg8(STR71X_XTI_PRH) << 8 | + (uint16_t)getreg8(STR71X_XTI_PRL); + uint16_t mask; + + /* Clear the interrupts now. This seems unsafe? Couldn't this cause lost + * interupts? + */ + + mask = ~pending; + putreg8(mask >> 8, STR71X_XTI_PRH); + putreg8(mask & 0xff, STR71X_XTI_PRH); + + /* Then dispatch the interrupts */ + + pending &= enabled; + + for (irq = STR71X_IRQ_FIRSTXTI, mask = 0x0001; + irq < NR_IRQS && pending != 0; + irq++, mask <<= 1) + { + /* Is this interrupt pending? */ + + if ((pending & mask) != 0) + { + /* Deliver the IRQ */ + + irq_dispatch(irq, context); + pending &= ~mask; + } + } + return OK; +} + +/******************************************************************************** + * Public Functions + ********************************************************************************/ + +/******************************************************************************** + * Name: str7x_xtiinitialize + * + * Description: + * Configure XTI for operation. Note that the lines are not used as wake-up + * sources in this implementation. Some extensions would be required for that + * capability. + * + ********************************************************************************/ + +int str7x_xtiinitialize(void) +{ + int ret; + + /* Mask all interrupts by setting XTI MRH/L to zero */ + + putreg8(0, STR71X_XTI_MRH); + putreg8(0, STR71X_XTI_MRL); + + /* Clear any pending interrupts by setting XTI PRH/L to zero */ + + putreg8(0, STR71X_XTI_PRH); + putreg8(0, STR71X_XTI_PRL); + + /* Attach the XTI interrupt */ + + ret = irq_attach(STR71X_IRQ_XTI, str7x_xtiinterrupt); + if (ret == OK) + { + /* Enable the XTI interrupt at the XTI */ + + putreg8(STR71X_XTICTRL_ID1S, STR71X_XTI_CTRL); + + /* And enable the XTI interrupt at the interrupt controller */ + + up_enable_irq(STR71X_IRQ_XTI); + } + return ret; +} + +/******************************************************************************** + * Name: str7x_xticonfig + * + * Description: + * Configure an external line to provide interrupts. + * + ********************************************************************************/ + +int str7x_xticonfig(int irq, bool rising) +{ + uint8_t regval; + int bit; + int ndx; + int ret = -EINVAL; + + /* Configure one of the 16 lines as an interrupt source */ + + if (irq > STR71X_IRQ_FIRSTXTI && irq <= NR_IRQS) + { + /* Decide if we use the lower or upper regiser */ + + bit = irq - STR71X_IRQ_FIRSTXTI; + ndx = 0; + if (bit > 7) + { + /* Select the high register */ + + bit -= 8; + ndx = 1; + } + + /* Set the rising or trailing edge */ + + regval = getreg8(g_xtiregs[ndx].tr); + if (rising) + { + regval |= (1 << bit); + } + else + { + regval &= ~(1 << bit); + } + putreg8(regval, g_xtiregs[ndx].tr); + + /* Enable the interrupt be setting the corresponding mask bit + * the XTI_MRL/H register. + */ + + regval = getreg8(g_xtiregs[ndx].mr); + regval |= (1 << bit); + putreg8(regval, g_xtiregs[ndx].mr); + + /* Return success */ + + ret = OK; + } + return ret; +} + +#endif /* CONFIG_STR71X_XTI */ diff --git a/nuttx/arch/arm/src/str71x/str71x_xti.h b/nuttx/arch/arm/src/str71x/str71x_xti.h index bbe3c46e0..d9458c196 100644 --- a/nuttx/arch/arm/src/str71x/str71x_xti.h +++ b/nuttx/arch/arm/src/str71x/str71x_xti.h @@ -1,7 +1,7 @@ /************************************************************************************ * arch/arm/src/str71x/str71x_xti.h * - * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. + * Copyright (C) 2008-2010 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without diff --git a/nuttx/configs/olimex-strp711/nettest/defconfig b/nuttx/configs/olimex-strp711/nettest/defconfig index 80c48d7ac..256f81665 100755 --- a/nuttx/configs/olimex-strp711/nettest/defconfig +++ b/nuttx/configs/olimex-strp711/nettest/defconfig @@ -118,7 +118,7 @@ CONFIG_STR71X_CAN=n CONFIG_STR71X_BSPI0=y CONFIG_STR71X_BSPI1=n CONFIG_STR71X_HDLC=n -CONFIG_STR71X_XTI=n +CONFIG_STR71X_XTI=y CONFIG_STR71X_GPIO0=y CONFIG_STR71X_GPIO1=y CONFIG_STR71X_GPIO2=n diff --git a/nuttx/configs/olimex-strp711/src/up_enc28j60.c b/nuttx/configs/olimex-strp711/src/up_enc28j60.c index cc285a3dc..8d80e4d34 100755 --- a/nuttx/configs/olimex-strp711/src/up_enc28j60.c +++ b/nuttx/configs/olimex-strp711/src/up_enc28j60.c @@ -71,6 +71,7 @@ * UART3, I2C cannot be used with SPI0. The GPIOs selected for the ENC28J60 * interrupt conflict with TMR1. */ +#warning "Need to select differnt interrupt pin.. XTI doesn't support this one" /**************************************************************************** * Included Files @@ -90,6 +91,7 @@ #include "chip.h" #include "up_arch.h" #include "up_internal.h" +#include "str71x_internal.h" #ifdef CONFIG_NET_ENC28J60 @@ -105,6 +107,10 @@ # error "Need CONFIG_STR71X_BSPI0 in the configuration" #endif +#ifndef CONFIG_STR71X_XTI +# error "Need CONFIG_STR71X_XTI in the configuration" +#endif + /* UART3, I2C cannot be used with SPI0. The GPIOs selected for the ENC28J60 * interrupt conflict with TIM1. */ @@ -123,7 +129,7 @@ #define ENC28J60_DEVNO 0 /* Only one ENC28J60 */ #define ENC28J60_IRQ 0 /* NEEDED!!!!!!!!!!!!!!!! */ -/* Debug ********************************************************************/ +#warning "Eventually need to fix XTI IRQ number!" /**************************************************************************** * Private Data @@ -148,34 +154,42 @@ void up_netinitialize(void) /* Get the SPI port */ - nvdbg("up_netinitialize: Initializing SPI port %d\n", ENC28J60_SPI_PORTNO); + nvdbg("Initializing SPI port %d\n", ENC28J60_SPI_PORTNO); spi = up_spiinitialize(ENC28J60_SPI_PORTNO); if (!spi) { - ndbg("up_netinitialize: Failed to initialize SPI port %d\n", + ndbg("Failed to initialize SPI port %d\n", ENC28J60_SPI_PORTNO); return; } - nvdbg("up_netinitialize: Successfully initialized SPI port %d\n", + /* Configure the XTI for the ENC28J60 interrupt. */ + + ret = str7x_xticonfig(ENC28J60_IRQ, false); + if (ret < 0) + { + ndbg("Failed configure interrupt for IRQ %d: %d\n", ENC28J60_IRQ, ret); + return; + } + + nvdbg("Successfully initialized SPI port %d\n", ENC28J60_SPI_PORTNO); /* Bind the SPI port to the ENC28J60 driver */ - nvdbg("up_netinitialize: Binding SPI port %d to ENC28J60 device %d\n", + nvdbg("Binding SPI port %d to ENC28J60 device %d\n", ENC28J60_SPI_PORTNO, ENC28J60_DEVNO); -#warning "Need to implement IRQ interrupt before we can use this" ret = enc_initialize(spi, ENC28J60_DEVNO, ENC28J60_IRQ); if (ret < 0) { - ndbg("up_netinitialize: Failed to bind SPI port %d ENC28J60 device %d: %d\n", + ndbg("Failed to bind SPI port %d ENC28J60 device %d: %d\n", ENC28J60_SPI_PORTNO, ENC28J60_DEVNO, ret); return; } - nvdbg("up_netinitialize: Successfuly bound SPI port %d ENC28J60 device %d\n", + nvdbg("Successfuly bound SPI port %d ENC28J60 device %d\n", ENC28J60_SPI_PORTNO, ENC28J60_DEVNO); } #endif /* CONFIG_NET_ENC28J60 */