9
0
Fork 0

I learned how to spell PSEUDO

git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@5010 7fd9a85b-ad96-42d3-883c-3090e2eb8679
This commit is contained in:
patacongo 2012-08-05 17:44:11 +00:00
parent ffd511a6a7
commit 9fc3bfb88d
35 changed files with 1644 additions and 1645 deletions

View File

@ -30,5 +30,5 @@ device.c
device.c implements a simple device driver. Reads from this device
will access the in-memory copy of hello.pex This device driver is
registered as /dev/pashello in the psuedo filesystem.
registered as /dev/pashello in the pseudo filesystem.

View File

@ -505,14 +505,14 @@ o mkfatfs <path>
Format a fat file system on the block device specified by path.
NSH provides this command to access the mkfatfs() NuttX API.
This block device must reside in the NuttX psuedo filesystem and
This block device must reside in the NuttX pseudo filesystem and
must have been created by some call to register_blockdriver() (see
include/nuttx/fs/fs.h).
o mkfifo <path>
Creates a FIFO character device anywhere in the pseudo file system,
creating whatever psuedo directories that may be needed to complete
creating whatever pseudo directories that may be needed to complete
the full path. By convention, however, device drivers are place in
the standard /dev directory. After it is created, the FIFO device
may be used as any other device driver. NSH provides this command
@ -584,7 +584,7 @@ o mount [-t <fstype> <block-device> <dir-path>]
If the mount parameters are provied on the command after the 'mount'
command, then the 'mount' command will mount a file system in the
NuttX psuedo-file system. 'mount' performs a three way association,
NuttX pseudo-file system. 'mount' performs a three way association,
binding:
File system. The '-t <fstype>' option identifies the type of
@ -592,19 +592,19 @@ o mount [-t <fstype> <block-device> <dir-path>]
of this writing, vfat is the only supported value for <fstype>
Block Device. The <block-device> argument is the full or relative
path to a block driver inode in the psuedo filesystem. By convention,
path to a block driver inode in the pseudo filesystem. By convention,
this is a name under the /dev sub-directory. This <block-device>
must have been previously formatted with the same file system
type as specified by <fstype>
Mount Point. The mount point is the location in the psuedo file
Mount Point. The mount point is the location in the pseudo file
system where the mounted volume will appear. This mount point
can only reside in the NuttX psuedo filesystem. By convention, this
can only reside in the NuttX pseudo filesystem. By convention, this
mount point is a subdirectory under /mnt. The mount command will
create whatever psuedo directories that may be needed to complete
create whatever pseudo directories that may be needed to complete
the full path but the full path must not already exist.
After the volume has been mounted in the NuttX psuedo file
After the volume has been mounted in the NuttX pseudo file
system, it may be access in the same way as other objects in the
file system.

View File

@ -88,12 +88,12 @@
# define MAX_ARGV_ENTRIES (NSH_MAX_ARGUMENTS+4)
#endif
/* Help layout */
/* Help command summary layout */
#define MAX_CMDLEN 12
#define CMDS_PER_LINE 5
#define CMDS_PER_LINE 6
#define NUM_CMDS (sizeof(g_cmdmap)/sizeof(struct cmdmap_s))
#define NUM_CMDS ((sizeof(g_cmdmap)/sizeof(struct cmdmap_s)) - 1)
#define NUM_CMD_ROWS ((NUM_CMDS + (CMDS_PER_LINE-1)) / CMDS_PER_LINE)
/****************************************************************************
@ -443,7 +443,7 @@ static inline void help_cmdlist(FAR struct nsh_vtbl_s *vtbl)
for (i = 0; i < NUM_CMD_ROWS; i++)
{
nsh_output(vtbl, " ");
for (j = 0, k = i; j < CMDS_PER_LINE && k < NUM_CMDS; j++, k += CMDS_PER_LINE)
for (j = 0, k = i; j < CMDS_PER_LINE && k < NUM_CMDS; j++, k += NUM_CMD_ROWS)
{
nsh_output(vtbl, "%-12s", g_cmdmap[k].cmd);
}
@ -516,6 +516,7 @@ static int help_cmd(FAR struct nsh_vtbl_s *vtbl, FAR const char *cmd)
{
/* Yes... show it */
nsh_output(vtbl, "%s usage:", cmd);
help_showcmd(vtbl, cmdmap);
return OK;
}
@ -574,14 +575,14 @@ static inline void help_builtins(FAR struct nsh_vtbl_s *vtbl)
static int cmd_help(FAR struct nsh_vtbl_s *vtbl, int argc, char **argv)
{
FAR const char *cmd = NULL;
#ifdef CONFIG_NSH_HELP_TERSE
#ifndef CONFIG_NSH_HELP_TERSE
bool verbose = false;
int i;
#endif
/* The command may be followed by a verbose option */
#ifdef CONFIG_NSH_HELP_TERSE
#ifndef CONFIG_NSH_HELP_TERSE
i = 1;
if (argc > i)
{
@ -618,14 +619,13 @@ static int cmd_help(FAR struct nsh_vtbl_s *vtbl, int argc, char **argv)
{
/* Yes.. show the single command */
nsh_output(vtbl, "%s usage:", cmd);
help_cmd(vtbl, cmd);
}
else
{
/* In verbose mode, show detailed help for all commands */
#ifdef CONFIG_NSH_HELP_TERSE
#ifndef CONFIG_NSH_HELP_TERSE
if (verbose)
{
nsh_output(vtbl, "Where <cmd> is one of:\n");
@ -637,7 +637,6 @@ static int cmd_help(FAR struct nsh_vtbl_s *vtbl, int argc, char **argv)
else
#endif
{
nsh_output(vtbl, "help usage:");
help_cmd(vtbl, "help");
nsh_output(vtbl, "\n");
help_cmdlist(vtbl);

View File

@ -192,7 +192,7 @@ enum pcode_e
opSYSIO,
/* Psuedo-operations:
/* Pseudo-operations:
* For LINE: arg1 = file number; arg2 = line number
*/

View File

@ -135,7 +135,7 @@
* dlbl = stack data label
* offs = 16-bit frame offset (signed)
* uoffs = 16-bit base offset (unsigned)
* c = string follows psuedo-operation
* c = string follows pseudo-operation
* * = Indicates pseudo-operations (these are removed
* after final fixup of the object file).
*/
@ -399,7 +399,7 @@
/* (o16|o8|0x3a)-(o8|o16|0x3e) -- unassigned */
/* Psuedo-operations:
/* Pseudo-operations:
* For LINE: arg8 = file number; arg16 = line number
*/

View File

@ -431,7 +431,7 @@ static const struct
/* 0xfd */ { invOp, NOARG16 },
/* 0xfe */ { invOp, NOARG16 },
/* Psuedo-operations:
/* Pseudo-operations:
* For LINE: arg8 = file number; arg16 = line number
*/

View File

@ -2185,7 +2185,7 @@ static int pexec32(FAR struct pexec_s *st, uint8_t opcode, uint8_t imm8, uint16_
ret = pexec_sysio(st, imm8, imm16);
break;
/* Psuedo-operations: (No stack arguments)
/* Pseudo-operations: (No stack arguments)
* For LINE: imm8 = file number; imm16 = line number
*/

View File

@ -115,5 +115,5 @@ KEY:
uoffs4 = 32-bit word offset with respect to SPB (unsigned)
uoffs2 = 32-bit halfword offset with respect to SPB (unsigned)
uoffs = 32-bit byte offset with respect to SPB (unsigned)
c = string follows psuedo-operation
c = string follows pseudo-operation
= Indicates pseudo-operations (these are removed

View File

@ -162,7 +162,7 @@
* uoffs4 = 32-bit word offset with respect to SPB (unsigned)
* uoffs2 = 32-bit halfword offset with respect to SPB (unsigned)
* uoffs = 32-bit byte offset with respect to SPB (unsigned)
* c = string follows psuedo-operation
* c = string follows pseudo-operation
* * = Indicates pseudo-operations (these are removed
* after final fixup of the object file).
*/
@ -418,7 +418,7 @@
#define oLABEL (o32|0x3d)
/* Psuedo-operations: arg = file number OR line number */
/* Pseudo-operations: arg = file number OR line number */
#define oINCLUDE (o32|0x3e)
#define oLINE (o32|0x3f)

View File

@ -303,7 +303,7 @@ static const struct optab_s g_sArg32OpTable[64] =
/* 0xbd */ { NULL, LABEL_DEC },
/* Psuedo-operations: arg = file number OR line number */
/* Pseudo-operations: arg = file number OR line number */
/* 0xbe */ { "INCLUDE ", FILENO },
/* 0xbf */ { "LINE ", LINENO },

View File

@ -272,7 +272,7 @@ void pas_GenerateIoOperation(uint16_t ioOpcode, uint16_t fileNumber)
}
/***********************************************************************/
/* Generate a psuedo call to a built-in, standard pascal function */
/* Generate a pseudo call to a built-in, standard pascal function */
void pas_BuiltInFunctionCall(uint16_t libOpcode)
{

View File

@ -3119,7 +3119,7 @@
function called stm32_clockenable() that can be used by PM logic to re-start
the PLL after re-awakening from deep sleep modes.
* fs/fs_foreachinode.c and fs/fs_foreachmountpoint.c: All logic to traverse
inodes and mountpoints in the NuttX psuedo-file system.
inodes and mountpoints in the NuttX pseudo-file system.
* fs/fat/fs_fat32.c: Max. filename length reported by statfs() was wrong
if FAT long file names were enabled.
* lib/stdio/lib_libvsprintf.c: Fieldwidth and justification were not

View File

@ -84,7 +84,7 @@
<code>CONFIG_NFILE_DESCRIPTORS > 0</code>. You must include support for file descriptors.
</li>
<li>
<code>CONFIG_DISABLE_MOUNTPOINT=n</code>. You must include support for mount points in the psuedo-file system.
<code>CONFIG_DISABLE_MOUNTPOINT=n</code>. You must include support for mount points in the pseudo-file system.
</li>
</ul>
<li>
@ -123,8 +123,8 @@ int mount(const char *source, const char *target, const char *filesystemtype, un
<p>
<b>Input Paramters</b>:
<ul>
<li><code>source</code>. A null-terminated string providing the fill path to a block driver in the NuttX psuedo-file system.
<li><code>target</code>. The location in the NuttX psuedo-file system where the volume will be mounted.
<li><code>source</code>. A null-terminated string providing the fill path to a block driver in the NuttX pseudo-file system.
<li><code>target</code>. The location in the NuttX pseudo-file system where the volume will be mounted.
<li><code>filesystemtype</code>. A string identifying the type of file system to use.
<li><code>mountflags</code>. Various flags that can be used to qualify how the file system is mounted.
<li><code>data</code>. Opaque data that is passed to the file system with the mount occurs.
@ -220,7 +220,7 @@ nfsmount &lt;server-address&gt; &lt;mount-point&gt; &lt;remote-path&gt;
</pre></ul>
<p>
<b>Synopsis</b>.
The <code>nfsmount</code> command mounts a network file system in the NuttX psuedo filesystem.
The <code>nfsmount</code> command mounts a network file system in the NuttX pseudo filesystem.
The <code>nfsmount</code> will use NFSv3 UDP protocol to mount the remote file system.
</p>
<p>
@ -236,7 +236,7 @@ nfsmount &lt;server-address&gt; &lt;mount-point&gt; &lt;remote-path&gt;
The <code>&lt;mount-point &gt;</code> is the location in the NuttX pseudo filesystem where the mounted volume will appear.
This mount point can only reside in the NuttX pseudo filesystem.
By convention, this mount point is a subdirectory under <code>/mnt</code>.
The mount command will create whatever psuedo directories that may be needed to complete the full path (but the full path must not already exist).
The mount command will create whatever pseudo directories that may be needed to complete the full path (but the full path must not already exist).
</li>
<li>
The <code>&lt;remote-path&gt;</code> is the file system <code>/</code> directory being exported from server.

View File

@ -1400,7 +1400,7 @@ mkfifo &lt;path&gt;
<p>
<b>Synopsis</b>.
Creates a FIFO character device anywhere in the pseudo file system, creating
whatever psuedo directories that may be needed to complete the <code>&lt;path&gt;</code>.
whatever pseudo directories that may be needed to complete the <code>&lt;path&gt;</code>.
By convention, however, device drivers are place in the standard <code>/dev</code> directory.
After it is created, the FIFO device may be used as any other device driver.
NSH provides this command to access the <a href="NuttxUserGuide.html#mkfifo"><code>mkfifo()</code></a> NuttX API.
@ -1492,7 +1492,7 @@ mount -t &lt;fstype&gt; &lt;block-device&gt; <code>&lt;dir-path&gt;</code>
If no paramters are provided on the command line after the <code>mount</code> command, then the <code>mount</code> command will enumerate all of the current mountpoints on the console.
</p>
<p>
If the mount parameters are provied on the command after the <code>mount</code> command, then the <code>mount</code> command will mount a file system in the NuttX psuedo-file system.
If the mount parameters are provied on the command after the <code>mount</code> command, then the <code>mount</code> command will mount a file system in the NuttX pseudo-file system.
<code>mount</code>' performs a three way association, binding:
</p>
<ol>
@ -1513,7 +1513,7 @@ mount -t &lt;fstype&gt; &lt;block-device&gt; <code>&lt;dir-path&gt;</code>
<a href="NuttxUserGuide.html#FileSystemOverview"><i>pseudo</i> filesystem</a> where the mounted volume will appear.
This mount point can only reside in the NuttX <a href="NuttxUserGuide.html#FileSystemOverview"><i>pseudo</i> filesystem</a>.
By convention, this mount point is a subdirectory under <code>/mnt</code>.
The mount command will create whatever psuedo directories that may be needed to complete the
The mount command will create whatever pseudo directories that may be needed to complete the
full path but the full path must not already exist.
</li>
</ol>

View File

@ -703,9 +703,9 @@ o File system / Generic drivers (fs/, drivers/)
Title: REMOVING PIPES AND FIFOS
Description: There is no way to remove a FIFO or PIPE created in the
psuedo filesystem. Once created, they persist indefinitely
pseudo filesystem. Once created, they persist indefinitely
and cannot be unlinked. This is actually a more generic
issue: unlink does not work for anything in the psuedo-
issue: unlink does not work for anything in the pseudo-
filesystem.
Status: Open, but partially resolved: pipe buffer is at least freed
when there are not open references to the pipe/FIFO.

View File

@ -413,7 +413,7 @@ host operations. To make these modifications, do the following:
When this change is made, NSH should be extended to support USB flash
devices. When a FLASH device is inserted, you should see a device
appear in the /dev (psuedo) directory. The device name should be
appear in the /dev (pseudo) directory. The device name should be
like /dev/sda, /dev/sdb, etc. The USB mass storage device, is present
it can be mounted from the NSH command line like:

View File

@ -829,7 +829,7 @@ host operations. To make these modifications, do the following:
When this change is made, NSH should be extended to support USB flash
devices. When a FLASH device is inserted, you should see a device
appear in the /dev (psuedo) directory. The device name should be
appear in the /dev (pseudo) directory. The device name should be
like /dev/sda, /dev/sdb, etc. The USB mass storage device, is present
it can be mounted from the NSH command line like:

View File

@ -384,7 +384,7 @@ host operations. To make these modifications, do the following:
When this change is made, NSH should be extended to support USB flash
devices. When a FLASH device is inserted, you should see a device
appear in the /dev (psuedo) directory. The device name should be
appear in the /dev (pseudo) directory. The device name should be
like /dev/sda, /dev/sdb, etc. The USB mass storage device, is present
it can be mounted from the NSH command line like:

View File

@ -788,7 +788,7 @@ USB host operations. To make these modifications, do the following:
When this change is made, NSH should be extended to support USB flash
devices. When a FLASH device is inserted, you should see a device
appear in the /dev (psuedo) directory. The device name should be
appear in the /dev (pseudo) directory. The device name should be
like /dev/sda, /dev/sdb, etc. The USB mass storage device, is present
it can be mounted from the NSH command line like:

View File

@ -96,7 +96,7 @@ int closedir(FAR DIR *dirp)
*/
#ifndef CONFIG_DISABLE_MOUNTPOINT
if (INODE_IS_MOUNTPT(inode) && !DIRENT_ISPSUEDONODE(idir->fd_flags))
if (INODE_IS_MOUNTPT(inode) && !DIRENT_ISPSEUDONODE(idir->fd_flags))
{
/* The node is a file system mointpoint. Verify that the mountpoint
* supports the closedir() method (not an error if it does not)
@ -117,13 +117,13 @@ int closedir(FAR DIR *dirp)
else
#endif
{
/* The node is part of the root psuedo file system, release
/* The node is part of the root pseudo file system, release
* our contained reference to the 'next' inode.
*/
if (idir->u.psuedo.fd_next)
if (idir->u.pseudo.fd_next)
{
inode_release(idir->u.psuedo.fd_next);
inode_release(idir->u.pseudo.fd_next);
}
}

View File

@ -342,7 +342,7 @@ int files_dup(FAR struct file *filep1, FAR struct file *filep2)
#endif
#endif
{
/* Open the psuedo file or device driver */
/* Open the pseudo file or device driver */
ret = inode->u.i_ops->open(filep2);
}

View File

@ -171,7 +171,7 @@ int foreach_inodelevel(FAR struct inode *node, struct inode_path_s *info)
* when the callback 'handler' returns a non-zero value, or when all of
* the inodes have been visited.
*
* NOTE 1: Use with caution... The psuedo-file system is locked throughout
* NOTE 1: Use with caution... The pseudo-file system is locked throughout
* the traversal.
* NOTE 2: The search algorithm is recursive and could, in principle, use
* an indeterminant amount of stack space. This will not usually be a

View File

@ -154,7 +154,7 @@ static int mountpoint_filter(FAR struct inode *node,
* mountpoint inodes. It is intended to support the mount() command to
* when the mount command is used to enumerate mounts.
*
* NOTE 1: Use with caution... The psuedo-file system is locked throughout
* NOTE 1: Use with caution... The pseudo-file system is locked throughout
* the traversal.
* NOTE 2: The search algorithm is recursive and could, in principle, use
* an indeterminant amount of stack space. This will not usually be a

View File

@ -75,10 +75,10 @@
/* Mountpoint fd_flags values */
#define DIRENTFLAGS_PSUEDONODE 1
#define DIRENTFLAGS_PSEUDONODE 1
#define DIRENT_SETPSUEDONODE(f) do (f) |= DIRENTFLAGS_PSUEDONODE; while (0)
#define DIRENT_ISPSUEDONODE(f) (((f) & DIRENTFLAGS_PSUEDONODE) != 0)
#define DIRENT_SETPSEUDONODE(f) do (f) |= DIRENTFLAGS_PSEUDONODE; while (0)
#define DIRENT_ISPSEUDONODE(f) (((f) & DIRENTFLAGS_PSEUDONODE) != 0)
/****************************************************************************
* Public Types
@ -236,7 +236,7 @@ EXTERN void inode_release(FAR struct inode *inode);
* when the callback 'handler' returns a non-zero value, or when all of
* the inodes have been visited.
*
* NOTE 1: Use with caution... The psuedo-file system is locked throughout
* NOTE 1: Use with caution... The pseudo-file system is locked throughout
* the traversal.
* NOTE 2: The search algorithm is recursive and could, in principle, use
* an indeterminant amount of stack space. This will not usually be a

View File

@ -138,19 +138,19 @@ static inline int open_mountpoint(FAR struct inode *inode,
static void open_pseudodir(FAR struct inode *inode, FAR struct fs_dirent_s *dir)
{
/* We have a valid psuedo-filesystem node. Take two references on the
/* We have a valid pseudo-filesystem node. Take two references on the
* inode -- one for the parent (fd_root) and one for the child (fd_next).
* Note that we do not call inode_addref because we are holding the tree
* semaphore and that would result in deadlock.
*/
inode->i_crefs += 2;
dir->u.psuedo.fd_next = inode; /* This is the next node to use for readdir() */
dir->u.pseudo.fd_next = inode; /* This is the next node to use for readdir() */
/* Flag the inode as belonging to the psuedo-filesystem */
/* Flag the inode as belonging to the pseudo-filesystem */
#ifndef CONFIG_DISABLE_MOUNTPOINT
DIRENT_SETPSUEDONODE(dir->fd_flags);
DIRENT_SETPSEUDONODE(dir->fd_flags);
#endif
}
@ -242,7 +242,7 @@ FAR DIR *opendir(FAR const char *path)
}
/* Populate the DIR structure and return it to the caller. The way that
* we do this depends on whenever this is a "normal" psuedo-file-system
* we do this depends on whenever this is a "normal" pseudo-file-system
* inode or a file system mountpoint.
*/
@ -262,7 +262,7 @@ FAR DIR *opendir(FAR const char *path)
open_pseudodir(inode, dir);
}
/* Is this a node in the psuedo filesystem? Or a mountpoint? If the node
/* Is this a node in the pseudo filesystem? Or a mountpoint? If the node
* is the root (bisroot == TRUE), then this is a special case.
*/
@ -280,7 +280,7 @@ FAR DIR *opendir(FAR const char *path)
#endif
else
{
/* The node is part of the root psuedo file system. Does the inode have a child?
/* The node is part of the root pseudo file system. Does the inode have a child?
* If so that the child would be the 'root' of a list of nodes under
* the directory.
*/
@ -292,7 +292,7 @@ FAR DIR *opendir(FAR const char *path)
goto errout_with_direntry;
}
/* It looks we have a valid psuedo-filesystem directory node. */
/* It looks we have a valid pseudo-filesystem directory node. */
open_pseudodir(inode, dir);
}

View File

@ -53,16 +53,16 @@
****************************************************************************/
/****************************************************************************
* Name: readpsuedodir
* Name: readpseudodir
****************************************************************************/
static inline int readpsuedodir(struct fs_dirent_s *idir)
static inline int readpseudodir(struct fs_dirent_s *idir)
{
FAR struct inode *prev;
/* Check if we are at the end of the list */
if (!idir->u.psuedo.fd_next)
if (!idir->u.pseudo.fd_next)
{
/* End of file and error conditions are not distinguishable
* with readdir. Here we return -ENOENT to signal the end
@ -74,21 +74,21 @@ static inline int readpsuedodir(struct fs_dirent_s *idir)
/* Copy the inode name into the dirent structure */
strncpy(idir->fd_dir.d_name, idir->u.psuedo.fd_next->i_name, NAME_MAX+1);
strncpy(idir->fd_dir.d_name, idir->u.pseudo.fd_next->i_name, NAME_MAX+1);
/* If the node has file operations, we will say that it is
* a file.
*/
idir->fd_dir.d_type = 0;
if (idir->u.psuedo.fd_next->u.i_ops)
if (idir->u.pseudo.fd_next->u.i_ops)
{
#ifndef CONFIG_DISABLE_MOUNTPOINT
if (INODE_IS_BLOCK(idir->u.psuedo.fd_next))
if (INODE_IS_BLOCK(idir->u.pseudo.fd_next))
{
idir->fd_dir.d_type |= DTYPE_BLK;
}
if (INODE_IS_MOUNTPT(idir->u.psuedo.fd_next))
if (INODE_IS_MOUNTPT(idir->u.pseudo.fd_next))
{
idir->fd_dir.d_type |= DTYPE_DIRECTORY;
}
@ -103,7 +103,7 @@ static inline int readpsuedodir(struct fs_dirent_s *idir)
* is a directory. NOTE: that the node can be both!
*/
if (idir->u.psuedo.fd_next->i_child || !idir->u.psuedo.fd_next->u.i_ops)
if (idir->u.pseudo.fd_next->i_child || !idir->u.pseudo.fd_next->u.i_ops)
{
idir->fd_dir.d_type |= DTYPE_DIRECTORY;
}
@ -112,14 +112,14 @@ static inline int readpsuedodir(struct fs_dirent_s *idir)
inode_semtake();
prev = idir->u.psuedo.fd_next;
idir->u.psuedo.fd_next = prev->i_peer; /* The next node to visit */
prev = idir->u.pseudo.fd_next;
idir->u.pseudo.fd_next = prev->i_peer; /* The next node to visit */
if (idir->u.psuedo.fd_next)
if (idir->u.pseudo.fd_next)
{
/* Increment the reference count on this next node */
idir->u.psuedo.fd_next->i_crefs++;
idir->u.pseudo.fd_next->i_crefs++;
}
inode_semgive();
@ -179,7 +179,7 @@ FAR struct dirent *readdir(DIR *dirp)
#ifndef CONFIG_DISABLE_MOUNTPOINT
inode = idir->fd_root;
if (INODE_IS_MOUNTPT(inode) && !DIRENT_ISPSUEDONODE(idir->fd_flags))
if (INODE_IS_MOUNTPT(inode) && !DIRENT_ISPSEUDONODE(idir->fd_flags))
{
/* The node is a file system mointpoint. Verify that the mountpoint
* supports the readdir() method
@ -198,9 +198,9 @@ FAR struct dirent *readdir(DIR *dirp)
else
#endif
{
/* The node is part of the root psuedo file system */
/* The node is part of the root pseudo file system */
ret = readpsuedodir(idir);
ret = readpseudodir(idir);
}
/* ret < 0 is an error. Special case: ret = -ENOENT is end of file */

View File

@ -52,10 +52,10 @@
****************************************************************************/
/****************************************************************************
* Name: rewindpsuedodir
* Name: rewindpseudodir
****************************************************************************/
static inline void rewindpsuedodir(struct fs_dirent_s *idir)
static inline void rewindpseudodir(struct fs_dirent_s *idir)
{
struct inode *prev;
@ -63,8 +63,8 @@ static inline void rewindpsuedodir(struct fs_dirent_s *idir)
/* Reset the position to the beginning */
prev = idir->u.psuedo.fd_next; /* (Save to delete later) */
idir->u.psuedo.fd_next = idir->fd_root; /* The next node to visit */
prev = idir->u.pseudo.fd_next; /* (Save to delete later) */
idir->u.pseudo.fd_next = idir->fd_root; /* The next node to visit */
idir->fd_position = 0; /* Reset position */
/* Increment the reference count on the root=next node. We
@ -138,8 +138,8 @@ void rewinddir(FAR DIR *dirp)
else
#endif
{
/* The node is part of the root psuedo file system */
/* The node is part of the root pseudo file system */
rewindpsuedodir(idir);
rewindpseudodir(idir);
}
}

View File

@ -53,10 +53,10 @@
****************************************************************************/
/****************************************************************************
* Name: seekpsuedodir
* Name: seekpseudodir
****************************************************************************/
static inline void seekpsuedodir(struct fs_dirent_s *idir, off_t offset)
static inline void seekpseudodir(struct fs_dirent_s *idir, off_t offset)
{
struct inode *curr;
struct inode *prev;
@ -76,7 +76,7 @@ static inline void seekpsuedodir(struct fs_dirent_s *idir, off_t offset)
else
{
pos = idir->fd_position;
curr = idir->u.psuedo.fd_next;
curr = idir->u.pseudo.fd_next;
}
/* Traverse the peer list starting at the 'root' of the
@ -90,8 +90,8 @@ static inline void seekpsuedodir(struct fs_dirent_s *idir, off_t offset)
/* Now get the inode to vist next time that readdir() is called */
prev = idir->u.psuedo.fd_next;
idir->u.psuedo.fd_next = curr; /* The next node to visit (might be null) */
prev = idir->u.pseudo.fd_next;
idir->u.pseudo.fd_next = curr; /* The next node to visit (might be null) */
idir->fd_position = pos; /* Might be beyond the last dirent */
if (curr)
@ -223,8 +223,8 @@ void seekdir(FAR DIR *dirp, off_t offset)
else
#endif
{
/* The node is part of the root psuedo file system */
/* The node is part of the root pseudo file system */
seekpsuedodir(idir, offset);
seekpseudodir(idir, offset);
}
}

View File

@ -51,10 +51,10 @@
****************************************************************************/
/****************************************************************************
* Name: statpsuedo
* Name: statpseudo
****************************************************************************/
static inline int statpsuedo(FAR struct inode *inode, FAR struct stat *buf)
static inline int statpseudo(FAR struct inode *inode, FAR struct stat *buf)
{
/* Most of the stat entries just do not apply */
@ -92,7 +92,7 @@ static inline int statpsuedo(FAR struct inode *inode, FAR struct stat *buf)
{
/* If it has no operations, then it must just be a intermediate
* node in the inode tree. It is something like a directory.
* We'll say that all psuedo-directories are read-able but not
* We'll say that all pseudo-directories are read-able but not
* write-able.
*/
@ -195,9 +195,9 @@ int stat(const char *path, FAR struct stat *buf)
else
#endif
{
/* The node is part of the root psuedo file system */
/* The node is part of the root pseudo file system */
ret = statpsuedo(inode, buf);
ret = statpseudo(inode, buf);
}
/* Check if the stat operation was successful */

View File

@ -52,10 +52,10 @@
****************************************************************************/
/****************************************************************************
* Name: statpsuedo
* Name: statpseudo
****************************************************************************/
static inline int statpsuedofs(FAR struct inode *inode, FAR struct statfs *buf)
static inline int statpseudofs(FAR struct inode *inode, FAR struct statfs *buf)
{
memset(buf, 0, sizeof(struct statfs));
buf->f_type = PROC_SUPER_MAGIC;
@ -137,9 +137,9 @@ int statfs(FAR const char *path, FAR struct statfs *buf)
else
#endif
{
/* The node is part of the root psuedo file system */
/* The node is part of the root pseudo file system */
ret = statpsuedofs(inode, buf);
ret = statpseudofs(inode, buf);
}
/* Check if the statfs operation was successful */

View File

@ -319,7 +319,7 @@ int syslog_initialize(void)
SYSLOG_OFLAGS, 0666);
}
/* No... then it must be a character driver in the NuttX psuedo-
/* No... then it must be a character driver in the NuttX pseudo-
* file system.
*/

View File

@ -71,7 +71,7 @@
* Name: unregister_blockdriver
*
* Description:
* Remove the block driver inode at 'path' from the psuedo-file system
* Remove the block driver inode at 'path' from the pseudo-file system
*
****************************************************************************/

View File

@ -71,7 +71,7 @@
* Name: unregister_driver
*
* Description:
* Remove the character driver inode at 'path' from the psuedo-file system
* Remove the character driver inode at 'path' from the pseudo-file system
*
****************************************************************************/

View File

@ -65,12 +65,12 @@
* reference, a position, a dirent structure, and file-system-specific
* information.
*
* For the root psuedo-file system, we need retain only the 'next' inode
* For the root pseudo-file system, we need retain only the 'next' inode
* need for the next readdir() operation. We hold a reference on this
* inode so we know that it will persist until closedir is called.
*/
struct fs_psuedodir_s
struct fs_pseudodir_s
{
struct inode *fd_next; /* The inode for the next call to readdir() */
};
@ -140,7 +140,7 @@ struct fs_dirent_s
{
/* This is the node that was opened by opendir. The type of the inode
* determines the way that the readdir() operations are performed. For the
* psuedo root psuedo-file system, it is also used to support rewind.
* pseudo root pseudo-file system, it is also used to support rewind.
*
* We hold a reference on this inode so we know that it will persist until
* closedir() is called (although inodes linked to this inode may change).
@ -166,9 +166,9 @@ struct fs_dirent_s
union
{
/* Private data used by the built-in psuedo-file system */
/* Private data used by the built-in pseudo-file system */
struct fs_psuedodir_s psuedo;
struct fs_pseudodir_s pseudo;
/* Private data used by other file systems */

View File

@ -199,7 +199,7 @@ union inode_ops_u
#endif
};
/* This structure represents one inode in the Nuttx psuedo-file system */
/* This structure represents one inode in the Nuttx pseudo-file system */
struct inode
{
@ -342,7 +342,7 @@ EXTERN void weak_function fs_initialize(void);
* mountpoint inodes. It is intended to support the mount() command to
* when the mount command is used to enumerate mounts.
*
* NOTE 1: Use with caution... The psuedo-file system is locked throughout
* NOTE 1: Use with caution... The pseudo-file system is locked throughout
* the traversal.
* NOTE 2: The search algorithm is recursive and could, in principle, use
* an indeterminant amount of stack space. This will not usually be a
@ -415,7 +415,7 @@ EXTERN int register_blockdriver(const char *path,
* Name: unregister_driver
*
* Description:
* Remove the character driver inode at 'path' from the psuedo-file system
* Remove the character driver inode at 'path' from the pseudo-file system
*
****************************************************************************/
@ -426,7 +426,7 @@ EXTERN int unregister_driver(const char *path);
* Name: unregister_blockdriver
*
* Description:
* Remove the block driver inode at 'path' from the psuedo-file system
* Remove the block driver inode at 'path' from the pseudo-file system
*
****************************************************************************/