phone-side
/
nuttx-bb
9
0
Fork 0
Code Releases Activity

Add USB host support for the STM3240G-EVAL board 

git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@5069 7fd9a85b-ad96-42d3-883c-3090e2eb8679
This commit is contained in:
patacongo 2012-08-30 18:18:47 +00:00
parent 719d84691f
commit 98d0ef6c36
22 changed files with 585 additions and 193 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
nuttx/ChangeLog
View File

@ -3215,3 +3215,9 @@
appears to handle NAKing correctly is complete.
* configs/stm32f4discovery/*: Added and verifed support for USB OTG FS
host on the STM32F4Discovery board.
* configs/*/defconfig: Remove configuration documentation from config
files. It is redundant, error-prone, and difficult to maintain.
Configuration documentation is available in configs/README.txt for
common configurations and in configs/*/README.txt for board and MCU_
specific configurations.
* configs/stm3240g-eval: Add USB host support.

2
nuttx/configs/stm3220g-eval/nsh/defconfig
View File

@ -528,8 +528,6 @@ CONFIG_USBDEV_TRACE_NRECORDS=128
#
# STM32 USB OTG FS Host Configuration
#
# Pre-requisites
#
CONFIG_USBHOST=n
#CONFIG_STM32_OTGFS_RXFIFO_SIZE
#CONFIG_STM32_OTGFS_NPTXFIFO_SIZE

65
nuttx/configs/stm3240g-eval/README.txt
View File

@ -853,7 +853,7 @@ STM3240G-EVAL-specific Configuration Options
want to do that?
CONFIG_STM32_USBHOST_REGDEBUG - Enable very low-level register access
debug. Depends on CONFIG_DEBUG.
CONFIG_STM32_USBHOST_PKTDUMP - Dump all incoming and outgoing USB
CONFIG_STM32_USBHOST_PKTDUMP - Dump all incoming and outgoing USB
packets. Depends on CONFIG_DEBUG.
Configurations
@ -1028,8 +1028,67 @@ Where <subdir> is one of the following:
CONFIG_STM32_OTGFS - Enable the STM32 USB OTG FS block
CONFIG_STM32_SYSCFG - Needed
CONFIG_SCHED_WORKQUEUE - Worker thread support is required
9. This configuration requires that jumper JP22 be set to enable RS-232
9. USB OTG FS Host Support. The following changes will enable support for
a USB host on the STM32F4Discovery, including support for a mass storage
class driver:
CONFIG_USBDEV=n - Make sure tht USB device support is disabled
CONFIG_USBHOST=y - Enable USB host support
CONFIG_STM32_OTGFS=y - Enable the STM32 USB OTG FS block
CONFIG_STM32_SYSCFG=y - Needed for all USB OTF FS support
CONFIG_SCHED_WORKQUEUE=y - Worker thread support is required for the mass
storage class driver.
CONFIG_NSH_ARCHINIT=y - Architecture specific USB initialization
is needed for NSH
CONFIG_FS_FAT=y - Needed by the USB host mass storage class.
With those changes, you can use NSH with a FLASH pen driver as shown
belong. Here NSH is started with nothing in the USB host slot:
NuttShell (NSH) NuttX-x.yy
nsh> ls /dev
/dev:
console
null
ttyS0
After inserting the FLASH drive, the /dev/sda appears and can be
mounted like this:
nsh> ls /dev
/dev:
console
null
sda
ttyS0
nsh> mount -t vfat /dev/sda /mnt/stuff
nsh> ls /mnt/stuff
/mnt/stuff:
-rw-rw-rw- 16236 filea.c
And files on the FLASH can be manipulated to standard interfaces:
nsh> echo "This is a test" >/mnt/stuff/atest.txt
nsh> ls /mnt/stuff
/mnt/stuff:
-rw-rw-rw- 16236 filea.c
-rw-rw-rw- 16 atest.txt
nsh> cat /mnt/stuff/atest.txt
This is a test
nsh> cp /mnt/stuff/filea.c fileb.c
nsh> ls /mnt/stuff
/mnt/stuff:
-rw-rw-rw- 16236 filea.c
-rw-rw-rw- 16 atest.txt
-rw-rw-rw- 16236 fileb.c
To prevent data loss, don't forget to un-mount the FLASH drive
before removing it:
nsh> umount /mnt/stuff
11. This configuration requires that jumper JP22 be set to enable RS-232
operation.
nsh2:

14
nuttx/configs/stm3240g-eval/dhcpd/defconfig
View File

@ -440,7 +440,7 @@ CONFIG_RTC_FREQUENCY=n
CONFIG_RTC_ALARM=n
#
# USB Device Configuration
# STM32 USB OTG FS Device Configuration
#
CONFIG_USBDEV=n
CONFIG_USBDEV_ISOCHRONOUS=n
@ -451,6 +451,18 @@ CONFIG_USBDEV_MAXPOWER=100
CONFIG_USBDEV_TRACE=n
CONFIG_USBDEV_TRACE_NRECORDS=128
#
# STM32 USB OTG FS Host Configuration
#
CONFIG_USBHOST=n
#CONFIG_STM32_OTGFS_RXFIFO_SIZE
#CONFIG_STM32_OTGFS_NPTXFIFO_SIZE
#CONFIG_STM32_OTGFS_PTXFIFO_SIZE
#CONFIG_STM32_OTGFS_DESCSIZE
CONFIG_STM32_OTGFS_SOFINTR=n
CONFIG_STM32_USBHOST_REGDEBUG=n
CONFIG_STM32_USBHOST_PKTDUMP=n
#
# USB Serial Device Configuration
#

14
nuttx/configs/stm3240g-eval/nettest/defconfig
View File

@ -440,7 +440,7 @@ CONFIG_RTC_FREQUENCY=n
CONFIG_RTC_ALARM=n
#
# USB Device Configuration
# STM32 USB OTG FS Device Configuration
#
CONFIG_USBDEV=n
CONFIG_USBDEV_ISOCHRONOUS=n
@ -451,6 +451,18 @@ CONFIG_USBDEV_MAXPOWER=100
CONFIG_USBDEV_TRACE=n
CONFIG_USBDEV_TRACE_NRECORDS=128
#
# STM32 USB OTG FS Host Configuration
#
CONFIG_USBHOST=n
#CONFIG_STM32_OTGFS_RXFIFO_SIZE
#CONFIG_STM32_OTGFS_NPTXFIFO_SIZE
#CONFIG_STM32_OTGFS_PTXFIFO_SIZE
#CONFIG_STM32_OTGFS_DESCSIZE
CONFIG_STM32_OTGFS_SOFINTR=n
CONFIG_STM32_USBHOST_REGDEBUG=n
CONFIG_STM32_USBHOST_PKTDUMP=n
#
# USB Serial Device Configuration
#

14
nuttx/configs/stm3240g-eval/nsh/defconfig
View File

@ -519,7 +519,7 @@ CONFIG_STMPE811_THRESHX=26
CONFIG_STMPE811_THRESHY=34
#
# USB Device Configuration
# STM32 USB OTG FS Device Configuration
#
CONFIG_USBDEV=n
CONFIG_USBDEV_ISOCHRONOUS=n
@ -530,6 +530,18 @@ CONFIG_USBDEV_MAXPOWER=100
CONFIG_USBDEV_TRACE=n
CONFIG_USBDEV_TRACE_NRECORDS=128
#
# STM32 USB OTG FS Host Configuration
#
CONFIG_USBHOST=n
#CONFIG_STM32_OTGFS_RXFIFO_SIZE
#CONFIG_STM32_OTGFS_NPTXFIFO_SIZE
#CONFIG_STM32_OTGFS_PTXFIFO_SIZE
#CONFIG_STM32_OTGFS_DESCSIZE
CONFIG_STM32_OTGFS_SOFINTR=n
CONFIG_STM32_USBHOST_REGDEBUG=n
CONFIG_STM32_USBHOST_PKTDUMP=n
#
# USB Serial Device Configuration
#

14
nuttx/configs/stm3240g-eval/nsh2/defconfig
View File

@ -490,7 +490,7 @@ CONFIG_RTC_FREQUENCY=n
CONFIG_RTC_ALARM=n
#
# USB Device Configuration
# STM32 USB OTG FS Device Configuration
#
CONFIG_USBDEV=n
CONFIG_USBDEV_ISOCHRONOUS=n
@ -501,6 +501,18 @@ CONFIG_USBDEV_MAXPOWER=100
CONFIG_USBDEV_TRACE=n
CONFIG_USBDEV_TRACE_NRECORDS=128
#
# STM32 USB OTG FS Host Configuration
#
CONFIG_USBHOST=n
#CONFIG_STM32_OTGFS_RXFIFO_SIZE
#CONFIG_STM32_OTGFS_NPTXFIFO_SIZE
#CONFIG_STM32_OTGFS_PTXFIFO_SIZE
#CONFIG_STM32_OTGFS_DESCSIZE
CONFIG_STM32_OTGFS_SOFINTR=n
CONFIG_STM32_USBHOST_REGDEBUG=n
CONFIG_STM32_USBHOST_PKTDUMP=n
#
# USB Serial Device Configuration
#

14
nuttx/configs/stm3240g-eval/nxconsole/defconfig
View File

@ -489,7 +489,7 @@ CONFIG_RTC_FREQUENCY=n
CONFIG_RTC_ALARM=n
#
# USB Device Configuration
# STM32 USB OTG FS Device Configuration
#
CONFIG_USBDEV=n
CONFIG_USBDEV_ISOCHRONOUS=n
@ -500,6 +500,18 @@ CONFIG_USBDEV_MAXPOWER=100
CONFIG_USBDEV_TRACE=n
CONFIG_USBDEV_TRACE_NRECORDS=128
#
# STM32 USB OTG FS Host Configuration
#
CONFIG_USBHOST=n
#CONFIG_STM32_OTGFS_RXFIFO_SIZE
#CONFIG_STM32_OTGFS_NPTXFIFO_SIZE
#CONFIG_STM32_OTGFS_PTXFIFO_SIZE
#CONFIG_STM32_OTGFS_DESCSIZE
CONFIG_STM32_OTGFS_SOFINTR=n
CONFIG_STM32_USBHOST_REGDEBUG=n
CONFIG_STM32_USBHOST_PKTDUMP=n
#
# USB Serial Device Configuration
#

14
nuttx/configs/stm3240g-eval/nxwm/defconfig
View File

@ -520,7 +520,7 @@ CONFIG_STMPE811_THRESHX=39
CONFIG_STMPE811_THRESHY=51
#
# USB Device Configuration
# STM32 USB OTG FS Device Configuration
#
CONFIG_USBDEV=n
CONFIG_USBDEV_ISOCHRONOUS=n
@ -531,6 +531,18 @@ CONFIG_USBDEV_MAXPOWER=100
CONFIG_USBDEV_TRACE=n
CONFIG_USBDEV_TRACE_NRECORDS=128
#
# STM32 USB OTG FS Host Configuration
#
CONFIG_USBHOST=n
#CONFIG_STM32_OTGFS_RXFIFO_SIZE
#CONFIG_STM32_OTGFS_NPTXFIFO_SIZE
#CONFIG_STM32_OTGFS_PTXFIFO_SIZE
#CONFIG_STM32_OTGFS_DESCSIZE
CONFIG_STM32_OTGFS_SOFINTR=n
CONFIG_STM32_USBHOST_REGDEBUG=n
CONFIG_STM32_USBHOST_PKTDUMP=n
#
# USB Serial Device Configuration
#

14
nuttx/configs/stm3240g-eval/ostest/defconfig
View File

@ -426,7 +426,7 @@ CONFIG_RTC_FREQUENCY=n
CONFIG_RTC_ALARM=n
#
# USB Device Configuration
# STM32 USB OTG FS Device Configuration
#
CONFIG_USBDEV=n
CONFIG_USBDEV_ISOCHRONOUS=n
@ -437,6 +437,18 @@ CONFIG_USBDEV_MAXPOWER=100
CONFIG_USBDEV_TRACE=n
CONFIG_USBDEV_TRACE_NRECORDS=128
#
# STM32 USB OTG FS Host Configuration
#
CONFIG_USBHOST=n
#CONFIG_STM32_OTGFS_RXFIFO_SIZE
#CONFIG_STM32_OTGFS_NPTXFIFO_SIZE
#CONFIG_STM32_OTGFS_PTXFIFO_SIZE
#CONFIG_STM32_OTGFS_DESCSIZE
CONFIG_STM32_OTGFS_SOFINTR=n
CONFIG_STM32_USBHOST_REGDEBUG=n
CONFIG_STM32_USBHOST_PKTDUMP=n
#
# USB Serial Device Configuration
#

4
nuttx/configs/stm3240g-eval/src/Makefile
View File

@ -56,8 +56,8 @@ ifeq ($(CONFIG_ARCH_BUTTONS),y)
CSRCS += up_buttons.c
endif
ifeq ($(CONFIG_USBDEV),y)
CSRCS += up_usbdev.c
ifeq ($(CONFIG_STM32_OTGFS),y)
CSRCS += up_usb.c
endif
ifeq ($(CONFIG_STM32_FSMC),y)

70
nuttx/configs/stm3240g-eval/src/stm3240g-internal.h
View File

@ -134,9 +134,14 @@
* PF11 OTG_FS_Overcurrent
*/
#define GPIO_OTGFS_VBUS (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_OPENDRAIN|GPIO_PORTA|GPIO_PIN9)
#define GPIO_OTGFS_PWRON (GPIO_OUTPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_PUSHPULL|GPIO_PORTH|GPIO_PIN5)
#define GPIO_OTGFS_OVER (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_PUSHPULL|GPIO_PORTF|GPIO_PIN11)
#define GPIO_OTGFS_VBUS (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_OPENDRAIN|GPIO_PORTA|GPIO_PIN9)
#define GPIO_OTGFS_PWRON (GPIO_OUTPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_PUSHPULL|GPIO_PORTH|GPIO_PIN5)
#ifdef CONFIG_USBHOST
# define GPIO_OTGFS_OVER (GPIO_INPUT|GPIO_EXTI|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_PUSHPULL|GPIO_PORTF|GPIO_PIN11)
#else
# define GPIO_OTGFS_OVER (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_PUSHPULL|GPIO_PORTF|GPIO_PIN11)
#endif
/* The STM3240G-EVAL has two STMPE811QTR I/O expanders on board both connected
* to the STM32 via I2C1. They share a common interrupt line: PI2.
@ -212,77 +217,93 @@
void weak_function stm32_spiinitialize(void);
/************************************************************************************
/****************************************************************************************************
* Name: stm32_usbinitialize
*
* Description:
* Called to setup USB-related GPIO pins for the STM3210E-EVAL board.
* Called from stm32_usbinitialize very early in inialization to setup USB-related GPIO pins for
* the STM3240G-EVAL board.
*
************************************************************************************/
****************************************************************************************************/
#ifdef CONFIG_STM32_OTGFS
void weak_function stm32_usbinitialize(void);
#endif
/************************************************************************************
/****************************************************************************************************
* Name: stm32_usbhost_initialize
*
* Description:
* Called at application startup time to initialize the USB host functionality. This function will
* start a thread that will monitor for device connection/disconnection events.
*
****************************************************************************************************/
#if defined(CONFIG_STM32_OTGFS) && defined(CONFIG_USBHOST)
int stm32_usbhost_initialize(void);
#endif
/****************************************************************************************************
* Name: stm32_extmemgpios
*
* Description:
* Initialize GPIOs for external memory usage
*
************************************************************************************/
****************************************************************************************************/
#ifdef CONFIG_STM32_FSMC
void stm32_extmemgpios(const uint32_t *gpios, int ngpios);
#endif
/************************************************************************************
/****************************************************************************************************
* Name: stm32_extmemaddr
*
* Description:
* Initialize adress line GPIOs for external memory access
*
************************************************************************************/
****************************************************************************************************/
#ifdef CONFIG_STM32_FSMC
void stm32_extmemaddr(int naddrs);
#endif
/************************************************************************************
/****************************************************************************************************
* Name: stm32_extmemdata
*
* Description:
* Initialize data line GPIOs for external memory access
*
************************************************************************************/
****************************************************************************************************/
#ifdef CONFIG_STM32_FSMC
void stm32_extmemdata(int ndata);
#endif
/************************************************************************************
/****************************************************************************************************
* Name: stm32_enablefsmc
*
* Description:
* enable clocking to the FSMC module
*
************************************************************************************/
****************************************************************************************************/
#ifdef CONFIG_STM32_FSMC
void stm32_enablefsmc(void);
#endif
/************************************************************************************
/****************************************************************************************************
* Name: stm32_disablefsmc
*
* Description:
* enable clocking to the FSMC module
*
************************************************************************************/
****************************************************************************************************/
#ifdef CONFIG_STM32_FSMC
void stm32_disablefsmc(void);
#endif
/************************************************************************************
/****************************************************************************************************
* Name: stm32_selectsram
*
* Description:
@ -306,43 +327,43 @@ void stm32_disablefsmc(void);
* word and uses the needed byte only). The NBL[1:0] are always kept low
* during read transactions.
*
************************************************************************************/
****************************************************************************************************/
#ifdef CONFIG_STM32_FSMC
void stm32_selectsram(void);
#endif
/************************************************************************************
/****************************************************************************************************
* Name: stm32_deselectsram
*
* Description:
* Disable SRAM
*
************************************************************************************/
****************************************************************************************************/
#ifdef CONFIG_STM32_FSMC
void stm32_deselectsram(void);
#endif
/************************************************************************************
/****************************************************************************************************
* Name: stm32_selectlcd
*
* Description:
* Initialize to the LCD
*
************************************************************************************/
****************************************************************************************************/
#ifdef CONFIG_STM32_FSMC
void stm32_selectlcd(void);
#endif
/************************************************************************************
/****************************************************************************************************
* Name: stm32_deselectlcd
*
* Description:
* Disable the LCD
*
************************************************************************************/
****************************************************************************************************/
#ifdef CONFIG_STM32_FSMC
void stm32_deselectlcd(void);
@ -350,4 +371,3 @@ void stm32_deselectlcd(void);
#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_STM3240G_EVAL_SRC_STM3240G_INTERNAL_H */

11
nuttx/configs/stm3240g-eval/src/up_boot.c
View File

@ -88,12 +88,13 @@ void stm32_boardinitialize(void)
stm32_selectsram();
#endif
/* Initialize USB is 1) USBDEV is selected, 2) the OTG FS controller is not
* disabled, and 3) the weak function stm32_usbinitialize() has been brought
* into the build.
/* Initialize USB if the 1) OTG FS controller is in the configuration and 2)
* disabled, and 3) the weak function stm32_usbinitialize() has been brought
* the weak function stm32_usbinitialize() has been brought into the build.
* Presumeably either CONFIG_USBDEV or CONFIG_USBHOST is also selected.
*/
#if defined(CONFIG_USBDEV) && defined(CONFIG_STM32_OTGFS)
#ifdef CONFIG_STM32_OTGFS
if (stm32_usbinitialize)
{
stm32_usbinitialize();

101
nuttx/configs/stm3240g-eval/src/up_nsh.c
View File

@ -55,7 +55,12 @@
# include <nuttx/mmcsd.h>
#endif
#ifdef CONFIG_STM32_OTGFS
# include "stm32_usbhost.h"
#endif
#include "stm32_internal.h"
#include "stm3240g-internal.h"
/****************************************************************************
* Pre-Processor Definitions
@ -67,41 +72,56 @@
#undef CONFIG_STM32_SPI1
/* PORT and SLOT number probably depend on the board configuration */
/* Assume that we support everything until convinced otherwise */
#ifdef CONFIG_ARCH_BOARD_STM3240G_EVAL
# define CONFIG_NSH_HAVEUSBDEV 1
# define CONFIG_NSH_HAVEMMCSD 1
# if defined(CONFIG_NSH_MMCSDSLOTNO) && CONFIG_NSH_MMCSDSLOTNO != 0
# error "Only one MMC/SD slot"
# undef CONFIG_NSH_MMCSDSLOTNO
# endif
# ifndef CONFIG_NSH_MMCSDSLOTNO
# define CONFIG_NSH_MMCSDSLOTNO 0
# endif
#else
/* Add configuration for new STM32 boards here */
# error "Unrecognized STM32 board"
# undef CONFIG_NSH_HAVEUSBDEV
# undef CONFIG_NSH_HAVEMMCSD
#endif
/* Can't support USB features if USB is not enabled */
#ifndef CONFIG_USBDEV
# undef CONFIG_NSH_HAVEUSBDEV
#endif
#define HAVE_MMCSD 1
#define HAVE_USBDEV 1
#define HAVE_USBHOST 1
/* Can't support MMC/SD features if mountpoints are disabled or if SDIO support
* is not enabled.
*/
#if defined(CONFIG_DISABLE_MOUNTPOINT) || !defined(CONFIG_STM32_SDIO)
# undef CONFIG_NSH_HAVEMMCSD
# undef HAVE_MMCSD
#endif
#ifndef CONFIG_NSH_MMCSDMINOR
# define CONFIG_NSH_MMCSDMINOR 0
/* Default MMC/SD minor number */
#ifdef HAVE_MMCSD
# ifndef CONFIG_NSH_MMCSDMINOR
# define CONFIG_NSH_MMCSDMINOR 0
# endif
/* Default MMC/SD SLOT number */
# if defined(CONFIG_NSH_MMCSDSLOTNO) && CONFIG_NSH_MMCSDSLOTNO != 0
# error "Only one MMC/SD slot"
# undef CONFIG_NSH_MMCSDSLOTNO
# endif
# ifndef CONFIG_NSH_MMCSDSLOTNO
# define CONFIG_NSH_MMCSDSLOTNO 0
# endif
#endif
/* Can't support USB host or device features if USB OTG FS is not enabled */
#ifndef CONFIG_STM32_OTGFS
# undef HAVE_USBDEV
# undef HAVE_USBHOST
#endif
/* Can't support USB device is USB device is not enabled */
#ifndef CONFIG_USBDEV
# undef HAVE_USBDEV
#endif
/* Can't support USB host is USB host is not enabled */
#ifndef CONFIG_USBHOST
# undef HAVE_USBHOST
#endif
/* Debug ********************************************************************/
@ -138,8 +158,10 @@ int nsh_archinitialize(void)
FAR struct spi_dev_s *spi;
FAR struct mtd_dev_s *mtd;
#endif
#ifdef CONFIG_NSH_HAVEMMCSD
#ifdef HAVE_MMCSD
FAR struct sdio_dev_s *sdio;
#endif
#if defined(HAVE_MMCSD) || defined(HAVE_USBHOST)
int ret;
#endif
@ -148,35 +170,29 @@ int nsh_archinitialize(void)
#ifdef CONFIG_STM32_SPI1
/* Get the SPI port */
message("nsh_archinitialize: Initializing SPI port 1\n");
spi = up_spiinitialize(1);
if (!spi)
{
message("nsh_archinitialize: Failed to initialize SPI port 0\n");
return -ENODEV;
}
message("nsh_archinitialize: Successfully initialized SPI port 0\n");
/* Now bind the SPI interface to the M25P64/128 SPI FLASH driver */
message("nsh_archinitialize: Bind SPI to the SPI flash driver\n");
mtd = m25p_initialize(spi);
if (!mtd)
{
message("nsh_archinitialize: Failed to bind SPI port 0 to the SPI FLASH driver\n");
return -ENODEV;
}
message("nsh_archinitialize: Successfully bound SPI port 0 to the SPI FLASH driver\n");
#warning "Now what are we going to do with this SPI FLASH driver?"
#endif
/* Mount the SDIO-based MMC/SD block driver */
#ifdef CONFIG_NSH_HAVEMMCSD
#ifdef HAVE_MMCSD
/* First, get an instance of the SDIO interface */
message("nsh_archinitialize: Initializing SDIO slot %d\n",
CONFIG_NSH_MMCSDSLOTNO);
sdio = sdio_initialize(CONFIG_NSH_MMCSDSLOTNO);
if (!sdio)
{
@ -187,15 +203,12 @@ int nsh_archinitialize(void)
/* Now bind the SDIO interface to the MMC/SD driver */
message("nsh_archinitialize: Bind SDIO to the MMC/SD driver, minor=%d\n",
CONFIG_NSH_MMCSDMINOR);
ret = mmcsd_slotinitialize(CONFIG_NSH_MMCSDMINOR, sdio);
if (ret != OK)
{
message("nsh_archinitialize: Failed to bind SDIO to the MMC/SD driver: %d\n", ret);
return ret;
}
message("nsh_archinitialize: Successfully bound SDIO to the MMC/SD driver\n");
/* Then let's guess and say that there is a card in the slot. I need to check to
* see if the STM3240G-EVAL board supports a GPIO to detect if there is a card in
@ -204,5 +217,19 @@ int nsh_archinitialize(void)
sdio_mediachange(sdio, true);
#endif
#ifdef HAVE_USBHOST
/* Initialize USB host operation. stm32_usbhost_initialize() starts a thread
* will monitor for USB connection and disconnection events.
*/
ret = stm32_usbhost_initialize();
if (ret != OK)
{
message("nsh_archinitialize: Failed to initialize USB host: %d\n", ret);
return ret;
}
#endif
return OK;
}

294
nuttx/configs/stm3240g-eval/src/up_usb.c Normal file
View File

@ -0,0 +1,294 @@
/************************************************************************************
* configs/stm3240g-eval/src/up_usbdev.c
* arch/arm/src/board/up_boot.c
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include <sched.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/usb/usbdev.h>
#include <nuttx/usb/usbhost.h>
#include <nuttx/usb/usbdev_trace.h>
#include "up_arch.h"
#include "stm32_internal.h"
#include "stm3240g-internal.h"
#ifdef CONFIG_STM32_OTGFS
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
#if defined(CONFIG_USBDEV) || defined(CONFIG_USBHOST)
# define HAVE_USB 1
#else
# warning "CONFIG_STM32_OTGFS is enabled but neither CONFIG_USBDEV nor CONFIG_USBHOST"
# undef HAVE_USB
#endif
#ifndef CONFIG_USBHOST_DEFPRIO
# define CONFIG_USBHOST_DEFPRIO 50
#endif
#ifndef CONFIG_USBHOST_STACKSIZE
# define CONFIG_USBHOST_STACKSIZE 1024
#endif
/************************************************************************************
* Private Data
************************************************************************************/
#ifdef CONFIG_USBHOST
static struct usbhost_driver_s *g_drvr;
#endif
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Name: usbhost_waiter
*
* Description:
* Wait for USB devices to be connected.
*
************************************************************************************/
#ifdef CONFIG_USBHOST
static int usbhost_waiter(int argc, char *argv[])
{
bool connected = false;
int ret;
uvdbg("Running\n");
for (;;)
{
/* Wait for the device to change state */
ret = DRVR_WAIT(g_drvr, connected);
DEBUGASSERT(ret == OK);
connected = !connected;
uvdbg("%s\n", connected ? "connected" : "disconnected");
/* Did we just become connected? */
if (connected)
{
/* Yes.. enumerate the newly connected device */
(void)DRVR_ENUMERATE(g_drvr);
}
}
/* Keep the compiler from complaining */
return 0;
}
#endif
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: stm32_usbinitialize
*
* Description:
* Called from stm32_usbinitialize very early in inialization to setup USB-related
* GPIO pins for the STM3240G-EVAL board.
*
************************************************************************************/
void stm32_usbinitialize(void)
{
/* The OTG FS has an internal soft pull-up. No GPIO configuration is required */
/* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */
#ifdef CONFIG_STM32_OTGFS
stm32_configgpio(GPIO_OTGFS_VBUS);
stm32_configgpio(GPIO_OTGFS_PWRON);
stm32_configgpio(GPIO_OTGFS_OVER);
#endif
}
/***********************************************************************************
* Name: stm32_usbhost_initialize
*
* Description:
* Called at application startup time to initialize the USB host functionality.
* This function will start a thread that will monitor for device
* connection/disconnection events.
*
***********************************************************************************/
#ifdef CONFIG_USBHOST
int stm32_usbhost_initialize(void)
{
int pid;
int ret;
/* First, register all of the class drivers needed to support the drivers
* that we care about:
*/
uvdbg("Register class drivers\n");
ret = usbhost_storageinit();
if (ret != OK)
{
udbg("Failed to register the mass storage class\n");
}
/* Then get an instance of the USB host interface */
uvdbg("Initialize USB host\n");
g_drvr = usbhost_initialize(0);
if (g_drvr)
{
/* Start a thread to handle device connection. */
uvdbg("Start usbhost_waiter\n");
pid = TASK_CREATE("usbhost", CONFIG_USBHOST_DEFPRIO,
CONFIG_USBHOST_STACKSIZE,
(main_t)usbhost_waiter, (const char **)NULL);
return pid < 0 ? -ENOEXEC : OK;
}
return -ENODEV;
}
#endif
/***********************************************************************************
* Name: stm32_usbhost_vbusdrive
*
* Description:
* Enable/disable driving of VBUS 5V output. This function must be provided be
* each platform that implements the STM32 OTG FS host interface
*
* "On-chip 5 V VBUS generation is not supported. For this reason, a charge pump
* or, if 5 V are available on the application board, a basic power switch, must
* be added externally to drive the 5 V VBUS line. The external charge pump can
* be driven by any GPIO output. When the application decides to power on VBUS
* using the chosen GPIO, it must also set the port power bit in the host port
* control and status register (PPWR bit in OTG_FS_HPRT).
*
* "The application uses this field to control power to this port, and the core
* clears this bit on an overcurrent condition."
*
* Input Parameters:
* iface - For future growth to handle multiple USB host interface. Should be zero.
* enable - true: enable VBUS power; false: disable VBUS power
*
* Returned Value:
* None
*
***********************************************************************************/
#ifdef CONFIG_USBHOST
void stm32_usbhost_vbusdrive(int iface, bool enable)
{
DEBUGASSERT(iface == 0);
if (enable)
{
/* Enable the Power Switch by driving the enable pin low */
stm32_gpiowrite(GPIO_OTGFS_PWRON, false);
}
else
{
/* Disable the Power Switch by driving the enable pin high */
stm32_gpiowrite(GPIO_OTGFS_PWRON, true);
}
}
#endif
/************************************************************************************
* Name: stm32_setup_overcurrent
*
* Description:
* Setup to receive an interrupt-level callback if an overcurrent condition is
* detected.
*
* Input paramter:
* handler - New overcurrent interrupt handler
*
* Returned value:
* Old overcurrent interrupt handler
*
************************************************************************************/
#ifdef CONFIG_USBHOST
xcpt_t stm32_setup_overcurrent(xcpt_t handler)
{
return stm32_gpiosetevent(GPIO_OTGFS_OVER, true, true, true, handler);
}
#endif
/************************************************************************************
* Name: stm32_usbsuspend
*
* Description:
* Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is
* used. This function is called whenever the USB enters or leaves suspend mode.
* This is an opportunity for the board logic to shutdown clocks, power, etc.
* while the USB is suspended.
*
************************************************************************************/
#ifdef CONFIG_USBDEV
void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
{
ulldbg("resume: %d\n", resume);
}
#endif
#endif /* CONFIG_STM32_OTGFS */

103
nuttx/configs/stm3240g-eval/src/up_usbdev.c
View File

@ -1,103 +0,0 @@
/************************************************************************************
* configs/stm3240g-eval/src/up_usbdev.c
* arch/arm/src/board/up_boot.c
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <nuttx/usb/usbdev.h>
#include <nuttx/usb/usbdev_trace.h>
#include "up_arch.h"
#include "stm32_internal.h"
#include "stm3240g-internal.h"
/************************************************************************************
* Definitions
************************************************************************************/
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: stm32_usbinitialize
*
* Description:
* Called to setup USB-related GPIO pins for the STM3210E-EVAL board.
*
************************************************************************************/
void stm32_usbinitialize(void)
{
/* The OTG FS has an internal soft pull-up */
/* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */
#ifdef CONFIG_STM32_OTGFS
stm32_configgpio(GPIO_OTGFS_VBUS);
stm32_configgpio(GPIO_OTGFS_PWRON);
stm32_configgpio(GPIO_OTGFS_OVER);
#endif
}
/************************************************************************************
* Name: stm32_usbsuspend
*
* Description:
* Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is
* used. This function is called whenever the USB enters or leaves suspend mode.
* This is an opportunity for the board logic to shutdown clocks, power, etc.
* while the USB is suspended.
*
************************************************************************************/
void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
{
ulldbg("resume: %d\n", resume);
}

14
nuttx/configs/stm3240g-eval/telnetd/defconfig
View File

@ -440,7 +440,7 @@ CONFIG_RTC_FREQUENCY=n
CONFIG_RTC_ALARM=n
#
# USB Device Configuration
# STM32 USB OTG FS Device Configuration
#
CONFIG_USBDEV=n
CONFIG_USBDEV_ISOCHRONOUS=n
@ -451,6 +451,18 @@ CONFIG_USBDEV_MAXPOWER=100
CONFIG_USBDEV_TRACE=n
CONFIG_USBDEV_TRACE_NRECORDS=128
#
# STM32 USB OTG FS Host Configuration
#
CONFIG_USBHOST=n
#CONFIG_STM32_OTGFS_RXFIFO_SIZE
#CONFIG_STM32_OTGFS_NPTXFIFO_SIZE
#CONFIG_STM32_OTGFS_PTXFIFO_SIZE
#CONFIG_STM32_OTGFS_DESCSIZE
CONFIG_STM32_OTGFS_SOFINTR=n
CONFIG_STM32_USBHOST_REGDEBUG=n
CONFIG_STM32_USBHOST_PKTDUMP=n
#
# USB Serial Device Configuration
#

2
nuttx/configs/stm32f4discovery/nsh/defconfig
View File

@ -460,8 +460,6 @@ CONFIG_USBDEV_TRACE_NRECORDS=128
#
# STM32 USB OTG FS Host Configuration
#
# Pre-requisites
#
CONFIG_USBHOST=n
#CONFIG_STM32_OTGFS_RXFIFO_SIZE
#CONFIG_STM32_OTGFS_NPTXFIFO_SIZE

2
nuttx/configs/stm32f4discovery/nxlines/defconfig
View File

@ -460,8 +460,6 @@ CONFIG_USBDEV_TRACE_NRECORDS=128
#
# STM32 USB OTG FS Host Configuration
#
# Pre-requisites
#
CONFIG_USBHOST=n
#CONFIG_STM32_OTGFS_RXFIFO_SIZE
#CONFIG_STM32_OTGFS_NPTXFIFO_SIZE

2
nuttx/configs/stm32f4discovery/ostest/defconfig
View File

@ -418,8 +418,6 @@ CONFIG_USBDEV_TRACE_NRECORDS=128
#
# STM32 USB OTG FS Host Configuration
#
# Pre-requisites
#
CONFIG_USBHOST=n
#CONFIG_STM32_OTGFS_RXFIFO_SIZE
#CONFIG_STM32_OTGFS_NPTXFIFO_SIZE

2
nuttx/configs/stm32f4discovery/pm/defconfig
View File

@ -479,8 +479,6 @@ CONFIG_USBDEV_TRACE_NRECORDS=128
#
# STM32 USB OTG FS Host Configuration
#
# Pre-requisites
#
CONFIG_USBHOST=n
#CONFIG_STM32_OTGFS_RXFIFO_SIZE
#CONFIG_STM32_OTGFS_NPTXFIFO_SIZE

2
nuttx/configs/stm32f4discovery/src/up_usb.c
View File

@ -281,10 +281,12 @@ xcpt_t stm32_setup_overcurrent(xcpt_t handler)
*
************************************************************************************/
#ifdef CONFIG_USBDEV
void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
{
ulldbg("resume: %d\n", resume);
}
#endif
#endif /* CONFIG_STM32_OTGFS */