Add conditional compilation to eliminate or limit cloning of descriptors when a new task is created

git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@1886 7fd9a85b-ad96-42d3-883c-3090e2eb8679

nuttx/Documentation/NuttxPortingGuide.html

@@ -2067,16 +2067,20 @@ extern void up_ledoff(int led);
   </li>
   <li>
     <code>CONFIG_FDCLONE_DISABLE</code>: Disable cloning of all file descriptors
-		  by task_create() when a new task is started.
+    by task_create() when a new task is started.
+    If set, all files/drivers will appear to be closed in the new task.
   </li>
   <li>
     <code>CONFIG_FDCLONE_STDIO</code>: Disable cloning of all but the first
     three file descriptors (stdin, stdout, stderr) by task_create()
     when a new task is started.
+    If set, all files/drivers will appear to be closed in the new task except
+    for stdin, stdout, and stderr.
   </li>
   <li>
     <code>CONFIG_SDCLONE_DISABLE</code>: Disable cloning of all socket
     desciptors by task_create() when a new task is started.
+    If set, all sockets will appear to be closed in the new task.
   </li>
 </ul>
 

nuttx/TODO

@@ -1,7 +1,7 @@
-NuttX TODO List (Last updated April 12, 2009)
+NuttX TODO List (Last updated June 15, 2009)
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
-  (6)  Task/Scheduler (sched/)
+  (5)  Task/Scheduler (sched/)
   (1)  Dynamic loader (N/A)
   (2)  Memory Managment (mm/)
   (1)  Signals (sched/, arch/)

nuttx/configs/README.txt

@@ -216,12 +216,16 @@ defconfig -- This is a configuration file similar to the Linux
 		  to zero if no more than one thread is expected to wait for
 		  a semaphore.
 		CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
-		  by task_create() when a new task is started.
+		  by task_create() when a new task is started.  If set, all
+  		  files/drivers will appear to be closed in the new task.
 		CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
 		  three file descriptors (stdin, stdout, stderr) by task_create()
-		  when a new task is started.
+		  when a new task is started. If set, all files/drivers will
+		  appear to be closed in the new task except for stdin, stdout,
+		  and stderr.
 		CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
-		  desciptors by task_create() when a new task is started.
+		  desciptors by task_create() when a new task is started. If
+		  set, all sockets will appear to be closed in the new task.
 
 	The following can be used to disable categories of APIs supported
 	by the OS.  If the compiler supports weak functions, then it

nuttx/configs/c5471evm/defconfig

@@ -169,6 +169,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=ostest
 CONFIG_DEBUG=n
@@ -186,6 +211,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/c5471evm/dhcpconfig

@@ -169,6 +169,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=uip
 CONFIG_DEBUG=n
@@ -186,6 +211,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/c5471evm/netconfig

@@ -169,6 +169,31 @@ CONFIG_NET_C5471_BASET10=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=nettest
 CONFIG_DEBUG=n
@@ -186,6 +211,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/c5471evm/nshconfig

@@ -169,6 +169,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=nsh
 CONFIG_DEBUG=n
@@ -186,6 +211,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/eagle100/httpd/defconfig

@@ -222,6 +222,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=uip
 CONFIG_DEBUG=n
@@ -240,6 +265,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=y
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/eagle100/nettest/defconfig

@@ -222,6 +222,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=nettest
 CONFIG_DEBUG=y
@@ -240,6 +265,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=y
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/eagle100/nsh/defconfig

@@ -222,6 +222,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=nsh
 CONFIG_DEBUG=n
@@ -239,6 +264,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/eagle100/ostest/defconfig

@@ -222,6 +222,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=ostest
 CONFIG_DEBUG=n
@@ -239,6 +264,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=y
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/ez80f910200kitg/ostest/defconfig

@@ -206,6 +206,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=ostest
 CONFIG_DEBUG=y
@@ -224,6 +249,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=y
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/ez80f910200zco/dhcpd/defconfig

@@ -212,17 +212,30 @@ CONFIG_HAVE_LIBM=n
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores.
 # CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
-#   inheritance is enabled.  It defines the maximum number of different
-#   threads (minus one) that can take counts on a semaphore with priority
-#   inheritance support.  This may be set to zero if priority inheritance
-#   is disabled OR if you are only using semaphores as mutexes (only
-#   one holder) OR if no more than two threads participate using a
-#   counting semaphore.
-# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled, then this
-#   setting is the maximum number of higher priority threads (minus 1)
-#   than can be waiting for another thread to release a count on a
-#   semaphore.  This value may be set to zero if no more than one
-#   thread is expected to wait for a semaphore.
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=dhcpd
 CONFIG_DEBUG=y
@@ -244,6 +257,9 @@ CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
 CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/ez80f910200zco/httpd/defconfig

@@ -212,17 +212,30 @@ CONFIG_HAVE_LIBM=n
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores.
 # CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
-#   inheritance is enabled.  It defines the maximum number of different
-#   threads (minus one) that can take counts on a semaphore with priority
-#   inheritance support.  This may be set to zero if priority inheritance
-#   is disabled OR if you are only using semaphores as mutexes (only
-#   one holder) OR if no more than two threads participate using a
-#   counting semaphore.
-# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled, then this
-#   setting is the maximum number of higher priority threads (minus 1)
-#   than can be waiting for another thread to release a count on a
-#   semaphore.  This value may be set to zero if no more than one
-#   thread is expected to wait for a semaphore.
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=uip
 CONFIG_DEBUG=y
@@ -244,6 +257,9 @@ CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
 CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/ez80f910200zco/nettest/defconfig

@@ -212,17 +212,30 @@ CONFIG_HAVE_LIBM=n
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores.
 # CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
-#   inheritance is enabled.  It defines the maximum number of different
-#   threads (minus one) that can take counts on a semaphore with priority
-#   inheritance support.  This may be set to zero if priority inheritance
-#   is disabled OR if you are only using semaphores as mutexes (only
-#   one holder) OR if no more than two threads participate using a
-#   counting semaphore.
-# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled, then this
-#   setting is the maximum number of higher priority threads (minus 1)
-#   than can be waiting for another thread to release a count on a
-#   semaphore.  This value may be set to zero if no more than one
-#   thread is expected to wait for a semaphore.
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=nettest
 CONFIG_DEBUG=y
@@ -244,6 +257,9 @@ CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
 CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/ez80f910200zco/nsh/defconfig

@@ -212,17 +212,30 @@ CONFIG_HAVE_LIBM=n
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores.
 # CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
-#   inheritance is enabled.  It defines the maximum number of different
-#   threads (minus one) that can take counts on a semaphore with priority
-#   inheritance support.  This may be set to zero if priority inheritance
-#   is disabled OR if you are only using semaphores as mutexes (only
-#   one holder) OR if no more than two threads participate using a
-#   counting semaphore.
-# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled, then this
-#   setting is the maximum number of higher priority threads (minus 1)
-#   than can be waiting for another thread to release a count on a
-#   semaphore.  This value may be set to zero if no more than one
-#   thread is expected to wait for a semaphore.
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=nsh
 CONFIG_DEBUG=y
@@ -244,6 +257,9 @@ CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
 CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/ez80f910200zco/ostest/defconfig

@@ -210,17 +210,30 @@ CONFIG_HAVE_LIBM=n
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores.
 # CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
-#   inheritance is enabled.  It defines the maximum number of different
-#   threads (minus one) that can take counts on a semaphore with priority
-#   inheritance support.  This may be set to zero if priority inheritance
-#   is disabled OR if you are only using semaphores as mutexes (only
-#   one holder) OR if no more than two threads participate using a
-#   counting semaphore.
-# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled, then this
-#   setting is the maximum number of higher priority threads (minus 1)
-#   than can be waiting for another thread to release a count on a
-#   semaphore.  This value may be set to zero if no more than one
-#   thread is expected to wait for a semaphore.
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=ostest
 CONFIG_DEBUG=y
@@ -241,6 +254,9 @@ CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
 CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/ez80f910200zco/poll/defconfig

@@ -212,17 +212,30 @@ CONFIG_HAVE_LIBM=n
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores.
 # CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
-#   inheritance is enabled.  It defines the maximum number of different
-#   threads (minus one) that can take counts on a semaphore with priority
-#   inheritance support.  This may be set to zero if priority inheritance
-#   is disabled OR if you are only using semaphores as mutexes (only
-#   one holder) OR if no more than two threads participate using a
-#   counting semaphore.
-# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled, then this
-#   setting is the maximum number of higher priority threads (minus 1)
-#   than can be waiting for another thread to release a count on a
-#   semaphore.  This value may be set to zero if no more than one
-#   thread is expected to wait for a semaphore.
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=poll
 CONFIG_DEBUG=y
@@ -244,6 +257,9 @@ CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
 CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/m68332evb/defconfig

@@ -140,6 +140,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=ostest
 CONFIG_DEBUG=n
@@ -157,6 +182,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/mcu123-lpc214x/nsh/defconfig

@@ -173,6 +173,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=nsh
 CONFIG_DEBUG=n
@@ -190,6 +215,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/mcu123-lpc214x/ostest/defconfig

@@ -169,6 +169,35 @@ CONFIG_HAVE_LIBM=n
 #   provides /dev/console.  Enables stdout, stderr, stdin.
 # CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
 #   driver (minimul support)
+# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
+#   errorcheck mutexes. Enables pthread_mutexattr_settype().
+# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
+#   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=ostest
 CONFIG_DEBUG=n
@@ -186,6 +215,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=y
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/mcu123-lpc214x/usbserial/defconfig

@@ -173,6 +173,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=usbserial
 CONFIG_DEBUG=n
@@ -191,6 +216,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/mcu123-lpc214x/usbstorage/defconfig

@@ -173,6 +173,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=usbstorage
 CONFIG_DEBUG=n
@@ -191,6 +216,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/mx1ads/ostest/defconfig

@@ -180,6 +180,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=ostest
 CONFIG_DEBUG=n
@@ -197,6 +222,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/ntosd-dm320/nettest/defconfig

@@ -157,6 +157,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=nettest
 CONFIG_DEBUG=n
@@ -174,6 +199,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/ntosd-dm320/nsh/defconfig

@@ -157,6 +157,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=nsh
 CONFIG_DEBUG=n
@@ -174,6 +199,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/ntosd-dm320/ostest/defconfig

@@ -157,6 +157,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=ostest
 CONFIG_DEBUG=n
@@ -174,6 +199,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/ntosd-dm320/poll/defconfig

@@ -157,6 +157,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=poll
 CONFIG_DEBUG=n
@@ -174,6 +199,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/ntosd-dm320/udp/defconfig

@@ -157,6 +157,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=udp
 CONFIG_DEBUG=n
@@ -174,6 +199,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/ntosd-dm320/uip/defconfig

@@ -157,6 +157,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=uip
 CONFIG_DEBUG=n
@@ -174,6 +199,11 @@ CONFIG_DEV_CONSOLE=n
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/olimex-strp711/nsh/defconfig

@@ -240,6 +240,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=nsh
 CONFIG_DEBUG=n
@@ -257,6 +282,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/olimex-strp711/ostest/defconfig

@@ -240,6 +240,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=ostest
 CONFIG_DEBUG=n
@@ -257,6 +282,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=y
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/pjrc-8051/defconfig

@@ -137,6 +137,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=ostest
 CONFIG_DEBUG=n
@@ -154,6 +179,11 @@ CONFIG_DEV_CONSOLE=n
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/sim/mount/defconfig

@@ -86,6 +86,31 @@ CONFIG_ARCH_BOARD_SIM=y
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=mount
 CONFIG_DEBUG=y
@@ -103,6 +128,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/sim/nettest/defconfig

@@ -86,6 +86,31 @@ CONFIG_ARCH_BOARD_SIM=y
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=nettest
 CONFIG_DEBUG=n
@@ -103,6 +128,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/sim/nsh/defconfig

@@ -86,6 +86,31 @@ CONFIG_ARCH_BOARD_SIM=y
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=nsh
 CONFIG_DEBUG=y
@@ -103,6 +128,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/sim/nx/defconfig

@@ -93,6 +93,31 @@ CONFIG_SIM_FBBPP=8
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=nx
 CONFIG_DEBUG=y
@@ -111,6 +136,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/sim/nx/defconfig-x11

@@ -89,6 +89,35 @@ CONFIG_SIM_FBBPP=32
 #   provides /dev/console.  Enables stdout, stderr, stdin.
 # CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
 #   driver (minimul support)
+# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
+#   errorcheck mutexes. Enables pthread_mutexattr_settype().
+# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
+#   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=nx
 CONFIG_DEBUG=y
@@ -105,6 +134,13 @@ CONFIG_START_DAY=28
 CONFIG_JULIAN_TIME=n
 CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=n
+CONFIG_MUTEX_TYPES=n
+CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/sim/ostest/defconfig

@@ -87,17 +87,30 @@ CONFIG_ARCH_BOARD_SIM=y
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores.
 # CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
-#   inheritance is enabled.  It defines the maximum number of different
-#   threads (minus one) that can take counts on a semaphore with priority
-#   inheritance support.  This may be set to zero if priority inheritance
-#   is disabled OR if you are only using semaphores as mutexes (only
-#   one holder) OR if no more than two threads participate using a
-#   counting semaphore.
-# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled, then this
-#   setting is the maximum number of higher priority threads (minus 1)
-#   than can be waiting for another thread to release a count on a
-#   semaphore.  This value may be set to zero if no more than one
-#   thread is expected to wait for a semaphore.
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=ostest
 CONFIG_DEBUG=y
@@ -117,6 +130,9 @@ CONFIG_MUTEX_TYPES=y
 CONFIG_PRIORITY_INHERITANCE=n
 CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/sim/pashello/defconfig

@@ -86,6 +86,31 @@ CONFIG_ARCH_BOARD_SIM=y
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=pashello
 CONFIG_DEBUG=n
@@ -103,6 +128,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/skp16c26/ostest/defconfig

@@ -184,6 +184,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=ostest
 CONFIG_DEBUG=n
@@ -201,6 +226,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=y
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/us7032evb1/nsh/defconfig

@@ -188,6 +188,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=nsh
 CONFIG_DEBUG=n
@@ -205,6 +230,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/us7032evb1/ostest/defconfig

@@ -188,6 +188,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=ostest
 CONFIG_DEBUG=n
@@ -205,6 +230,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=y
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/xtrs/nsh/defconfig

@@ -132,6 +132,31 @@ CONFIG_LINKER_ROM_AT_0000=y
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=nsh
 CONFIG_DEBUG=n
@@ -150,6 +175,11 @@ CONFIG_DEV_CONSOLE=n
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/xtrs/ostest/defconfig

@@ -132,6 +132,31 @@ CONFIG_LINKER_ROM_AT_0000=y
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=ostest
 CONFIG_DEBUG=n
@@ -150,6 +175,11 @@ CONFIG_DEV_CONSOLE=n
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/xtrs/pashello/defconfig

@@ -132,6 +132,31 @@ CONFIG_LINKER_ROM_AT_0000=y
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=pashello
 CONFIG_DEBUG=n
@@ -150,6 +175,11 @@ CONFIG_DEV_CONSOLE=n
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/z16f2800100zcog/ostest/defconfig

@@ -161,6 +161,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=ostest
 CONFIG_DEBUG=y
@@ -178,6 +203,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=y
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/z16f2800100zcog/pashello/defconfig

@@ -161,6 +161,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=pashello
 CONFIG_DEBUG=y
@@ -178,6 +203,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=y
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/z80sim/nsh/defconfig

@@ -122,6 +122,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=nsh
 CONFIG_DEBUG=n
@@ -140,6 +165,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/z80sim/ostest/defconfig

@@ -122,6 +122,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=ostest
 CONFIG_DEBUG=n
@@ -140,6 +165,11 @@ CONFIG_DEV_CONSOLE=n
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/z80sim/pashello/defconfig

@@ -122,6 +122,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=pashello
 CONFIG_DEBUG=n
@@ -140,6 +165,11 @@ CONFIG_DEV_CONSOLE=y
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/z8encore000zco/ostest/defconfig

@@ -156,6 +156,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=ostest
 CONFIG_DEBUG=y
@@ -174,6 +199,11 @@ CONFIG_DEV_CONSOLE=n
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/configs/z8f64200100kit/ostest/defconfig

@@ -156,6 +156,31 @@ CONFIG_HAVE_LIBM=n
 #   errorcheck mutexes. Enables pthread_mutexattr_settype().
 # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
 #   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
 #
 CONFIG_EXAMPLE=ostest
 CONFIG_DEBUG=y
@@ -174,6 +199,11 @@ CONFIG_DEV_CONSOLE=n
 CONFIG_DEV_LOWCONSOLE=n
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
 
 #
 # The following can be used to disable categories of

nuttx/net/net_clone.c

@@ -91,7 +91,7 @@ int net_clone(FAR struct socket *psock1, FAR struct socket *psock2)
   if (psock2->s_type == SOCK_STREAM)
     {
       struct uip_conn *conn = psock2->s_conn;
-      DEBUGASSERT(conn->crefs > 0);
+      DEBUGASSERT(conn->crefs > 0 && conn->crefs < 255);
       conn->crefs++;
     }
   else
@@ -100,7 +100,7 @@ int net_clone(FAR struct socket *psock1, FAR struct socket *psock2)
   if (psock2->s_type == SOCK_DGRAM)
     {
       struct uip_udp_conn *conn = psock2->s_conn;
-      DEBUGASSERT(conn->crefs > 0);
+      DEBUGASSERT(conn->crefs > 0 && conn->crefs < 255);
       conn->crefs++;
     }
   else