From 8a3be3955de62237232048c4087b7f48cde4ac38 Mon Sep 17 00:00:00 2001 From: patacongo Date: Sat, 21 Mar 2009 19:09:52 +0000 Subject: [PATCH] tiny webserver configuratin git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@1636 7fd9a85b-ad96-42d3-883c-3090e2eb8679 --- nuttx/configs/ez80f910200zco/httpd/Make.defs | 177 ++++ nuttx/configs/ez80f910200zco/httpd/README.txt | 5 + nuttx/configs/ez80f910200zco/httpd/defconfig | 794 ++++++++++++++++++ .../ez80f910200zco/httpd/httpd.linkcmd | 94 +++ .../ez80f910200zco/httpd/httpd.zdsproj | 247 ++++++ nuttx/configs/ez80f910200zco/httpd/setenv.sh | 52 ++ 6 files changed, 1369 insertions(+) create mode 100644 nuttx/configs/ez80f910200zco/httpd/Make.defs create mode 100644 nuttx/configs/ez80f910200zco/httpd/README.txt create mode 100644 nuttx/configs/ez80f910200zco/httpd/defconfig create mode 100755 nuttx/configs/ez80f910200zco/httpd/httpd.linkcmd create mode 100755 nuttx/configs/ez80f910200zco/httpd/httpd.zdsproj create mode 100755 nuttx/configs/ez80f910200zco/httpd/setenv.sh diff --git a/nuttx/configs/ez80f910200zco/httpd/Make.defs b/nuttx/configs/ez80f910200zco/httpd/Make.defs new file mode 100644 index 000000000..9b144501f --- /dev/null +++ b/nuttx/configs/ez80f910200zco/httpd/Make.defs @@ -0,0 +1,177 @@ +############################################################################ +# configs/ez80f910200zco/httpd/Make.defs +# +# Copyright (C) 2009 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +include ${TOPDIR}/.config + +# These are the directories where the ZDS-II toolchain is installed + +ZDSVERSION := 4.11.1 +ZDSINSTALLDIR := C:/Program\ Files/ZiLOG/ZDSII_eZ80Acclaim!_$(ZDSVERSION) +ZDSBINDIR := $(ZDSINSTALLDIR)/bin +ZDSSTDINCDIR := $(ZDSINSTALLDIR)/include/std +ZDSZILOGINCDIR := $(ZDSINSTALLDIR)/include/zilog +ZDSSTDLIBDIR := $(ZDSINSTALLDIR)/lib/std +ZDSZILOGLIBDIR := $(ZDSINSTALLDIR)/lib/zilog + +# These are the same directories but with the directory separator +# character swapped as needed by the ZDS-II compiler + +WTOPDIR := ${shell cygpath -w $(TOPDIR)} +WZDSSTDINCDIR := ${shell cygpath -w $(ZDSSTDINCDIR)} +WZDSZILOGINCDIR := ${shell cygpath -w $(ZDSZILOGINCDIR)} +WZDSSTDLIBDIR := ${shell cygpath -w $(ZDSSTDLIBDIR)} +WZDSZILOGLIBDIR := ${shell cygpath -w $(ZDSZILOGLIBDIR)} + +# Escaped versions + +ETOPDIR := ${shell echo "$(WTOPDIR)" | sed -e "s/ /%20/g"} +EZDSSTDINCDIR := ${shell echo "$(WZDSSTDINCDIR)" | sed -e "s/ /%20/g"} +EZDSZILOGINCDIR := ${shell echo "$(WZDSZILOGINCDIR)" | sed -e "s/ /%20/g"} + +# Assembler definitions + +ifeq ($(CONFIG_ARCH_CHIP_EZ80F91),y) +ARCHCPU = eZ80F91 +ARCHCPUDEF = _EZ80F91 +ARCHFAMILY = _EZ80ACCLAIM! +endif + +ifeq ("${CONFIG_DEBUG}","y") + ARCHASMOPTIMIZATION = -debug -NOsdiopt +else + ARCHASMOPTIMIZATION = -nodebug -NOsdiopt +endif + +ARCHASMCPUFLAGS = -cpu:$(ARCHCPU) -NOigcase +ARCHASMLIST = -list -NOlistmac -name -pagelen:56 -pagewidth:80 -quiet +ARCHASMWARNINGS = -warn +ARCHASMDEFINES = -define:$(ARCHCPUDEF)=1 -define:$(ARCHFAMILYDEF)=1 -define:__ASSEMBLY__ +ARCHASMINCLUDES = -include:'$(WTOPDIR)\include;$(WZDSSTDINCDIR);$(WZDSZILOGINCDIR)' +EARCHASMINCLUDES = -include:'$(ETOPDIR)\include;$(EZDSSTDINCDIR);$(EZDSZILOGINCDIR)' +AFLAGS = $(ARCHASMCPUFLAGS) $(ARCHASMINCLUDES) $(ARCHASMLIST) \ + $(ARCHASMWARNINGS) $(ARCHASMOPTIMIZATION) + +# Compiler definitions + +ifeq ("${CONFIG_DEBUG}","y") + ARCHOPTIMIZATION = -debug -reduceopt +else + ARCHOPTIMIZATION = -nodebug -optsize +endif + +ARCHCPUFLAGS = -chartype:S -promote -cpu:$(ARCHCPU) -NOgenprintf -NOmodsect \ + -asmsw:" $(ARCHASMCPUFLAGS) $(EARCHASMINCLUDES) $(ARCHASMWARNINGS) $(ARCHASMOPTIMIZATION)" +ARCHLIST = -keeplst -NOlist -NOlistinc -keepasm +ARCHPICFLAGS = +ARCHWARNINGS = -warn +ARCHDEFINES = -define:$(ARCHCPUDEF) -define:$(ARCHFAMILYDEF) +ARCHSTDINCLUDES = -stdinc:'$(WTOPDIR)\include;$(WZDSSTDINCDIR);$(WZDSZILOGINCDIR)' +ARCHUSRINCLUDES = -usrinc:'.' +ARCHINCLUDES = $(ARCHSTDINCLUDES) $(ARCHUSRINCLUDES) +CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHLIST) \ + $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) + +CPPDEFINES = -D$(ARCHFAMILYDEF) -D$(ARCHCPUDEF) -D__ASSEMBLY__ +CPPINCLUDES = -I$(TOPDIR)/include +CPPFLAGS = $(CPPDEFINES) $(CPPINCLUDES) + +# Librarian definitions + +ARFLAGS = -quiet -warn + +# Linker definitions + +LINKCMDTEMPLATE = $(TOPDIR)/configs/ez80f910200zco/httpd/httpd.linkcmd + +# Tool names/pathes + +CROSSDEV = +CC = $(ZDSBINDIR)/ez80cc.exe +CPP = gcc -E +LD = $(ZDSBINDIR)/ez80link.exe +AS = $(ZDSBINDIR)/ez80asm.exe +AR = $(ZDSBINDIR)/ez80lib.exe + +# File extensions + +ASMEXT = .asm +OBJEXT = .obj +LIBEXT = .lib +EXEEXT = .lod +HEXEXT = .hex + +# These are the macros that will be used in the NuttX make system +# to compile and assembly source files and to insert the resulting +# object files into an archive + +define PREPROCESS + @echo "CPP: $1->$2" + @$(CPP) $(CPPFLAGS) $1 -o $2 +endef + +define COMPILE + @#echo "CC: $1" + @(wfile=`cygpath -w $1`; $(CC) $(CFLAGS) $$wfile) +endef + +define ASSEMBLE + @#echo "AS: $1" + @(wfile=`cygpath -w $1`; $(AS) $(AFLAGS) $$wfile) +endef + +define ARCHIVE + echo "AR: $2"; \ + $(AR) $(ARFLAGS) $1=-+$2 || { echo "$(AR) $1=-+$2 FAILED!" ; exit 1 ; } +endef + +define CLEAN + @rm -f *.obj *.src *.lib *.hex *.lod *.lst +endef + +# This is the tool to use for dependencies (i.e., none) + +MKDEP = $(TOPDIR)/tools/mknulldeps.sh + +# ZDS-II cannot follow Cygwin soft links, so we will have to use directory copies + +DIRLINK = $(TOPDIR)/tools/winlink.sh +DIRUNLINK = $(TOPDIR)/tools/unlink.sh + +# Linux/Cygwin host tool definitions + +HOSTCC = gcc +HOSTINCLUDES = -I. +HOSTCFLAGS = -Wall -wstrict-prototypes -Wshadow -g -pipe +HOSTLDFLAGS = diff --git a/nuttx/configs/ez80f910200zco/httpd/README.txt b/nuttx/configs/ez80f910200zco/httpd/README.txt new file mode 100644 index 000000000..5bcdc7000 --- /dev/null +++ b/nuttx/configs/ez80f910200zco/httpd/README.txt @@ -0,0 +1,5 @@ +README.txt +^^^^^^^^^^ + +httpd.zdsproj is a simple ZDS-II project that will allow you + to use the ZDS-II debugger. diff --git a/nuttx/configs/ez80f910200zco/httpd/defconfig b/nuttx/configs/ez80f910200zco/httpd/defconfig new file mode 100644 index 000000000..8282b1b1b --- /dev/null +++ b/nuttx/configs/ez80f910200zco/httpd/defconfig @@ -0,0 +1,794 @@ +############################################################################ +# configs/ez80f910200zco/httpd/defconfig +# +# Copyright (C) 2009 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ +# +# Architecture selection +# +# CONFIG_ARCH - identifies the arch subdirectory and, hence, the +# processor architecture. +# CONFIG_ARCH_name - for use in C code. This identifies the particular +# processor architecture or, more accurately, the specific directory under +# nuttx/arch to use (CONFIG_ARCH_Z80 specifies nuttx/arch/z80). +# CONFIG_ARCH_CHIP - Identifies the specific chip or SoC that implements the +# architecture. +# CONFIG_ARCH_CHIP_chip - for use in C code. This identifies the +# particular chip or SoC that the architecture is implemented +# in (CONFIG_ARCH_CHIP_EZ80) +# CONFIG_ARCH_CHIP_EZ80F91 - Identifies ez80 chip variant +# CONFIG_ARCH_CHIP_EZ80F92 +# CONFIG_ARCH_CHIP_EZ80F93 +# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence, +# the board that supports the particular chip or SoC. +# CONFIG_ARCH_BOARD_name - for use in C code +# CONFIG_ARCH_NOINTC - define if the architecture does not +# support an interrupt controller or otherwise cannot support +# APIs like up_enable_irq() and up_disable_irq(). +# CONFIG_ARCH_IRQPRIO +# Define if the architecture suports prioritizaton of interrupts +# and the up_prioritize_irq() API. +# CONFIG_BOARD_LOOPSPERMSEC - for delay loops +# CONFIG_ENDIAN_BIG - Define for big endian (default is little endian) +# CONFIG_DRAM_SIZE - Describes the installed DRAM. +# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. +# CONFIG_ARCH_BUTTONS - Provide button APIs. Unique to board architecture. +# CONFIG_ARCH_TIMERHOOK - Provide board-specific hooks into periodic timer logic. +# +CONFIG_ARCH=z80 +CONFIG_ARCH_Z80=y +CONFIG_ARCH_CHIP=ez80 +CONFIG_ARCH_CHIP_EZ80=y +CONFIG_ARCH_CHIP_EZ80F91=y +CONFIG_ARCH_CHIP_EZ80F92=n +CONFIG_ARCH_CHIP_EZ80F93=n +CONFIG_ARCH_BOARD=ez80f910200zco +CONFIG_ARCH_BOARD_EZ80F910200ZCO=y +CONFIG_ARCH_NOINTC=n +CONFIG_ARCH_IRQPRIO=n +CONFIG_BOARD_LOOPSPERMSEC=1250 +CONFIG_ENDIAN_BIG=n +CONFIG_DRAM_SIZE=65536 +CONFIG_ARCH_LEDS=y +CONFIG_ARCH_BUTTONS=n +CONFIG_ARCH_TIMERHOOK=y +CONFIG_ARCH_STACKDUMP=n + +# +# eZ80 specific device driver settings +# +# CONFIG_UARTn_DISABLE - Disables all support for UARTn. +# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the +# console and ttyS0 (default is the UART0). +# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received. +# This specific the size of the receive buffer +# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before +# being sent. This specific the size of the transmit buffer +# CONFIG_UARTn_BAUD - The configure BAUD of the UART. +# CONFIG_UARTn_BITS - The number of data bits (7 or 8) +# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity +# CONFIG_UARTn_2STOP - 0=1 stop bit; 1=Two stop bits +# +CONFIG_UART0_DISABLE=n +CONFIG_UART1_DISABLE=y +CONFIG_UART0_SERIAL_CONSOLE=y +CONFIG_UART1_SERIAL_CONSOLE=n +CONFIG_UART0_TXBUFSIZE=0 +CONFIG_UART1_TXBUFSIZE=0 +CONFIG_UART0_RXBUFSIZE=0 +CONFIG_UART1_RXBUFSIZE=0 +CONFIG_UART0_BAUD=57600 +CONFIG_UART1_BAUD=57600 +CONFIG_UART0_BITS=0 +CONFIG_UART1_BITS=0 +CONFIG_UART0_PARITY=0 +CONFIG_UART1_PARITY=0 +CONFIG_UART0_2STOP=0 +CONFIG_UART1_2STOP=0 + +# +# ez80 EMAC +# +# CONFIG_EZ80_EMAC - Enables support for ez80 EMAC driver. +# CONFIG_EZ80_FIAD - Provides the MII address of the PHY device +# CONFIG_EZ80_PHYAM79C874 - Define for Am79c874 PHY +# CONFIG_EZ80_PHYCONFIG - 0:Autonegotiate, 1:100FD, 2:100HD, 3:10FD, 4:10HD +# CONFIG_EZ80_RAMADDR - Address of internal SRAM (default is 0xffc000) +# CONFIG_EZ80_PKTBUFSIZE, CONFIG_EZ80_NTXPKTBUFS, and CONFIG_EZ80_NRXPKTBUFS - +# The size of one packet buffer and the number of Rx and Tx packet +# buffers. This must add up to exactly 8192 bytes. +# CONFIG_EZ80_MDCDIV=1 - The value to use for the divider to derive +# the MII MDC clock from SLCK. Options are 1->4; 2->6; 3->8; 4->10; +# 5->14; 6->20; and 7->28 +# CONFIG_EZ80_TXPOLLTIMERMS - Specifies how often the EMAC controller +# should poll for a Tx packet (milliseconds) +# CONFIG_ARCH_MCFILTER - Enalbes multicast MAC address filtering (not +# fully implemented +CONFIG_EZ80_EMAC=y +CONFIG_EZ80_FIAD=0x1f +CONFIG_EZ80_PHYAM79C874=y +CONFIG_EZ80_PHYCONFIG=1 +CONFIG_EZ80_RAMADDR=0xf7c000 +CONFIG_EZ80_PKTBUFSIZE=64 +CONFIG_EZ80_NTXPKTBUFS=64 +CONFIG_EZ80_NRXPKTBUFS=64 +CONFIG_EZ80_PKTBUFSIZE=64 +CONFIG_EZ80_MDCDIV=0 +CONFIG_EZ80_TXPOLLTIMERMS=10 +CONFIG_ARCH_MCFILTER=n + +# +# General build options +# +# CONFIG_RRLOAD_BINARY - make the rrload binary format used with +# BSPs from www.ridgerun.com using the tools/mkimage.sh script +# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format +# used with many different loaders using the GNU objcopy program +# Should not be selected if you are not using the GNU toolchain. +# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format +# used with many different loaders using the GNU objcopy program +# Should not be selected if you are not using the GNU toolchain. +# CONFIG_RAW_BINARY - make a raw binary format file used with many +# different loaders using the GNU objcopy program. This option +# should not be selected if you are not using the GNU toolchain. +# CONFIG_HAVE_LIBM - toolchain supports libm.a +# +CONFIG_RRLOAD_BINARY=n +CONFIG_INTELHEX_BINARY=n +CONFIG_MOTOROLA_SREC=n +CONFIG_RAW_BINARY=n +CONFIG_HAVE_LIBM=n + +# +# General OS setup +# +# CONFIG_EXAMPLE - identifies the subdirectory in examples +# that will be used in the build +# CONFIG_DEBUG - enables built-in debug options +# CONFIG_DEBUG_VERBOSE - enables verbose debug output +# CONFIG_DEBUG_NET - enables debug of the network subsystem +# CONFIG_MM_REGIONS - If the architecture includes multiple +# regions of memory to allocate from, this specifies the +# number of memory regions that the memory manager must +# handle and enables the API mm_addregion(start, end); +# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot +# time console output +# CONFIG_HAVE_GETPUTC - architecture supports low-level, boot +# time console input +# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz +# or TICKS_PER_MSEC=10. This setting may be defined to +# inform NuttX that the processor hardware is providing +# system timer interrupts at some interrupt interval other +# than 10 msec. +# CONFIG_RR_INTERVAL - The round robin timeslice will be set +# this number of milliseconds; Round robin scheduling can +# be disabled by setting this value to zero. +# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in +# scheduler to monitor system performance +# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a +# task name to save in the TCB. Useful if scheduler +# instrumentation is selected. Set to zero to disable. +# CONFIG_JULIAN_TIME - Enables Julian time conversions +# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY - +# Used to initialize the internal time logic. +# CONFIG_HAVE_LOWUARTINIT - Provides low-level UART initialization +# logic as up_lowuartinit (only needed if there is no +# serial driver). +# CONFIG_DEV_CONSOLE - Set if architecture-specific logic +# provides /dev/console. Enables stdout, stderr, stdin. +# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console +# driver (minimal, write-only support) +# CONFIG_MUTEX_TYPES: Set to enable support for recursive and +# errorcheck mutexes. Enables pthread_mutexattr_settype(). +# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority +# inheritance on mutexes and semaphores. +# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority +# inheritance is enabled. It defines the maximum number of different +# threads (minus one) that can take counts on a semaphore with priority +# inheritance support. This may be set to zero if priority inheritance +# is disabled OR if you are only using semaphores as mutexes (only +# one holder) OR if no more than two threads participate using a +# counting semaphore. +# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled, then this +# setting is the maximum number of higher priority threads (minus 1) +# than can be waiting for another thread to release a count on a +# semaphore. This value may be set to zero if no more than one +# thread is expected to wait for a semaphore. +# +CONFIG_EXAMPLE=uip +CONFIG_DEBUG=y +CONFIG_DEBUG_VERBOSE=n +CONFIG_DEBUG_NET=n +CONFIG_MM_REGIONS=1 +CONFIG_ARCH_LOWPUTC=y +CONFIG_RR_INTERVAL=200 +CONFIG_SCHED_INSTRUMENTATION=n +CONFIG_TASK_NAME_SIZE=0 +CONFIG_START_YEAR=2009 +CONFIG_START_MONTH=3 +CONFIG_START_DAY=14 +CONFIG_JULIAN_TIME=n +CONFIG_HAVE_LOWUARTINIT=y +CONFIG_DEV_CONSOLE=y +CONFIG_DEV_LOWCONSOLE=y +CONFIG_MUTEX_TYPES=n +CONFIG_PRIORITY_INHERITANCE=n +CONFIG_SEM_PREALLOCHOLDERS=0 +CONFIG_SEM_NNESTPRIO=0 + +# +# The following can be used to disable categories of +# APIs supported by the OS. If the compiler supports +# weak functions, then it should not be necessary to +# disable functions unless you want to restrict usage +# of those APIs. +# +# There are certain dependency relationships in these +# features. +# +# o mq_notify logic depends on signals to awaken tasks +# waiting for queues to become full or empty. +# o pthread_condtimedwait() depends on signals to wake +# up waiting tasks. +# +CONFIG_DISABLE_CLOCK=n +CONFIG_DISABLE_POSIX_TIMERS=n +CONFIG_DISABLE_PTHREAD=n +CONFIG_DISABLE_SIGNALS=n +CONFIG_DISABLE_MQUEUE=y +CONFIG_DISABLE_MOUNTPOINT=y +CONFIG_DISABLE_ENVIRON=y +CONFIG_DISABLE_POLL=y + +# +# Misc libc settings +# +# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a +# little smaller if we do not support fieldwidthes +# +CONFIG_NOPRINTF_FIELDWIDTH=n + +# +# Allow for architecture optimized implementations +# +# The architecture can provide optimized versions of the +# following to improve sysem performance +# +CONFIG_ARCH_MEMCPY=n +CONFIG_ARCH_MEMCMP=n +CONFIG_ARCH_MEMMOVE=n +CONFIG_ARCH_MEMSET=n +CONFIG_ARCH_STRCMP=n +CONFIG_ARCH_STRCPY=n +CONFIG_ARCH_STRNCPY=n +CONFIG_ARCH_STRLEN=n +CONFIG_ARCH_BZERO=n +CONFIG_ARCH_KMALLOC=n +CONFIG_ARCH_KZMALLOC=n +CONFIG_ARCH_KFREE=n + +# +# Sizes of configurable things (0 disables) +# +# CONFIG_MAX_TASKS - The maximum number of simultaneously +# active tasks. This value must be a power of two. +# CONFIG_MAX_TASK_ARGS - This controls the maximum number of +# of parameters that a task may receive (i.e., maxmum value +# of 'argc') +# CONFIG_NPTHREAD_KEYS - The number of items of thread- +# specific data that can be retained +# CONFIG_NFILE_DESCRIPTORS - The maximum number of file +# descriptors (one for each open) +# CONFIG_NFILE_STREAMS - The maximum number of streams that +# can be fopen'ed +# CONFIG_NAME_MAX - The maximum size of a file name. +# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate +# on fopen. (Only if CONFIG_NFILE_STREAMS > 0) +# CONFIG_NUNGET_CHARS - Number of characters that can be +# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0) +# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message +# structures. The system manages a pool of preallocated +# message structures to minimize dynamic allocations +# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with +# a fixed payload size given by this settin (does not include +# other message structure overhead. +# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that +# can be passed to a watchdog handler +# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog +# structures. The system manages a pool of preallocated +# watchdog structures to minimize dynamic allocations +# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX +# timer structures. The system manages a pool of preallocated +# timer structures to minimize dynamic allocations. Set to +# zero for all dynamic allocations. +# +CONFIG_MAX_TASKS=8 +CONFIG_MAX_TASK_ARGS=4 +CONFIG_NPTHREAD_KEYS=0 +CONFIG_NFILE_DESCRIPTORS=8 +CONFIG_NFILE_STREAMS=8 +CONFIG_NAME_MAX=32 +CONFIG_STDIO_BUFFER_SIZE=0 +CONFIG_NUNGET_CHARS=0 +CONFIG_PREALLOC_MQ_MSGS=0 +CONFIG_MQ_MAXMSGSIZE=0 +CONFIG_MAX_WDOGPARMS=4 +CONFIG_PREALLOC_WDOGS=8 +CONFIG_PREALLOC_TIMERS=8 + +# +# Framebuffer driver options +CONFIG_FB_CMAP=n +CONFIG_FB_HWCURSOR=n +CONFIG_FB_HWCURSORIMAGE=n +#CONFIG_FB_HWCURSORSIZE +#CONFIG_FB_TRANSPARENCY + +# +# Filesystem configuration +# +# CONFIG_FS_FAT - Enable FAT filesystem support +# CONFIG_FAT_SECTORSIZE - Max supported sector size +# CONFIG_FS_ROMFS - Enable ROMFS filesystem support +CONFIG_FS_FAT=n +CONFIG_FS_ROMFS=n + +# +# SPI-based MMC/SD driver +# +# CONFIG_MMCSD_NSLOTS +# Number of MMC/SD slots supported by the driver +# CONFIG_MMCSD_READONLY +# Provide read-only access (default is read/write) +CONFIG_MMCSD_NSLOTS=1 +CONFIG_MMCSD_READONLY=n + +# +# TCP/IP and UDP support via uIP +# CONFIG_NET - Enable or disable all network features +# CONFIG_NET_IPv6 - Build in support for IPv6 +# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread. +# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options +# CONFIG_NET_BUFSIZE - uIP buffer size +# CONFIG_NET_TCP - TCP support on or off +# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks) +# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers +# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero) +# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until +# accept() is called. The size of the backlog is selected when listen() is called. +# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks) +# CONFIG_NET_UDP - UDP support on or off +# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off +# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections +# CONFIG_NET_ICMP - ICMP ping response support on or off +# CONFIG_NET_ICMP_PING - ICMP ping request support on or off +# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address +# CONFIG_NET_STATISTICS - uIP statistics on or off +# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window +# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table +# CONFIG_NET_BROADCAST - Broadcast support +# CONFIG_NET_LLH_LEN - The link level header length +# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates +CONFIG_NET=y +CONFIG_NET_IPv6=n +CONFIG_NSOCKET_DESCRIPTORS=8 +CONFIG_NET_SOCKOPTS=y +CONFIG_NET_BUFSIZE=420 +CONFIG_NET_TCP=n +CONFIG_NET_TCP_CONNS=8 +CONFIG_NET_NTCP_READAHEAD_BUFFERS=8 +CONFIG_NET_TCPBACKLOG=n +CONFIG_NET_MAX_LISTENPORTS=8 +CONFIG_NET_UDP=y +CONFIG_NET_UDP_CHECKSUMS=y +#CONFIG_NET_UDP_CONNS=10 +CONFIG_NET_ICMP=y +CONFIG_NET_ICMP_PING=n +#CONFIG_NET_PINGADDRCONF=0 +CONFIG_NET_STATISTICS=n +#CONFIG_NET_RECEIVE_WINDOW= +#CONFIG_NET_ARPTAB_SIZE=8 +CONFIG_NET_BROADCAST=y +#CONFIG_NET_LLH_LEN=14 +#CONFIG_NET_FWCACHE_SIZE=2 + +# +# UIP Network Utilities +# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP +# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries +CONFIG_NET_DHCP_LIGHT=n +CONFIG_NET_RESOLV_ENTRIES=4 + +# +# USB Device Configuration +# +# CONFIG_USBDEV +# Enables USB device support +# CONFIG_USBDEV_ISOCHRONOUS +# Build in extra support for isochronous endpoints +# CONFIG_USBDEV_DUALSPEED +# Hardware handles high and full speed operation (USB 2.0) +# CONFIG_USBDEV_SELFPOWERED +# Will cause USB features to indicate that the device is +# self-powered +# CONFIG_USBDEV_MAXPOWER +# Maximum power consumption in mA +# CONFIG_USBDEV_TRACE +# Enables USB tracing for debug +# CONFIG_USBDEV_TRACE_NRECORDS +# Number of trace entries to remember +CONFIG_USBDEV=n +CONFIG_USBDEV_ISOCHRONOUS=n +CONFIG_USBDEV_DUALSPEED=n +CONFIG_USBDEV_SELFPOWERED=y +CONFIG_USBDEV_REMOTEWAKEUP=n +CONFIG_USBDEV_MAXPOWER=100 +CONFIG_USBDEV_TRACE=n +CONFIG_USBDEV_TRACE_NRECORDS=128 + +# +# USB Serial Device Configuration +# +# CONFIG_USBSER +# Enable compilation of the USB serial driver +# CONFIG_USBSER_EPINTIN +# The logical 7-bit address of a hardware endpoint that supports +# interrupt IN operation +# CONFIG_USBSER_EPBULKOUT +# The logical 7-bit address of a hardware endpoint that supports +# bulk OUT operation +# CONFIG_USBSER_EPBULKIN +# The logical 7-bit address of a hardware endpoint that supports +# bulk IN operation +# CONFIG_USBSER_NWRREQS and CONFIG_USBSER_NRDREQS +# The number of write/read requests that can be in flight +# CONFIG_USBSER_VENDORID and CONFIG_USBSER_VENDORSTR +# The vendor ID code/string +# CONFIG_USBSER_PRODUCTID and CONFIG_USBSER_PRODUCTSTR +# The product ID code/string +# CONFIG_USBSER_RXBUFSIZE and CONFIG_USBSER_TXBUFSIZE +# Size of the serial receive/transmit buffers +CONFIG_USBSER=n +CONFIG_USBSER_EPINTIN=1 +CONFIG_USBSER_EPBULKOUT=2 +CONFIG_USBSER_EPBULKIN=5 +CONFIG_USBSER_NWRREQS=4 +CONFIG_USBSER_NRDREQS=4 +CONFIG_USBSER_VENDORID=0x067b +CONFIG_USBSER_PRODUCTID=0x2303 +CONFIG_USBSER_VENDORSTR="Nuttx" +CONFIG_USBSER_PRODUCTSTR="USBdev Serial" +CONFIG_USBSER_RXBUFSIZE=512 +CONFIG_USBSER_TXBUFSIZE=512 + +# +# USB Storage Device Configuration +# +# CONFIG_USBSTRG +# Enable compilation of the USB storage driver +# CONFIG_USBSTRG_EP0MAXPACKET +# Max packet size for endpoint 0 +# CONFIG_USBSTRG_EPBULKOUT and CONFIG_USBSTRG_EPBULKIN +# The logical 7-bit address of a hardware endpoints that support +# bulk OUT and IN operations +# CONFIG_USBSTRG_NWRREQS and CONFIG_USBSTRG_NRDREQS +# The number of write/read requests that can be in flight +# CONFIG_USBSTRG_BULKINREQLEN and CONFIG_USBSTRG_BULKOUTREQLEN +# The size of the buffer in each write/read request. This +# value needs to be at least as large as the endpoint +# maxpacket and ideally as large as a block device sector. +# CONFIG_USBSTRG_VENDORID and CONFIG_USBSTRG_VENDORSTR +# The vendor ID code/string +# CONFIG_USBSTRG_PRODUCTID and CONFIG_USBSTRG_PRODUCTSTR +# The product ID code/string +# CONFIG_USBSTRG_REMOVABLE +# Select if the media is removable +CONFIG_USBSTRG=n +CONFIG_USBSTRG_EP0MAXPACKET=64 +CONFIG_USBSTRG_EPBULKOUT=2 +CONFIG_USBSTRG_EPBULKIN=5 +CONFIG_USBSTRG_NRDREQS=2 +CONFIG_USBSTRG_NWRREQS=2 +CONFIG_USBSTRG_BULKINREQLEN=256 +CONFIG_USBSTRG_BULKOUTREQLEN=256 +CONFIG_USBSTRG_VENDORID=0x584e +CONFIG_USBSTRG_VENDORSTR="NuttX" +CONFIG_USBSTRG_PRODUCTID=0x5342 +CONFIG_USBSTRG_PRODUCTSTR="USBdev Storage" +CONFIG_USBSTRG_VERSIONNO=0x0399 +CONFIG_USBSTRG_REMOVABLE=y + +# +# CONFIG_NX +# Enables overall support for graphics library and NX +# CONFIG_NX_MULTIUSER +# Configures NX in multi-user mode +# CONFIG_NX_NPLANES +# Some YUV color formats requires support for multiple planes, +# one for each color component. Unless you have such special +# hardware, this value should be undefined or set to 1 +# CONFIG_NX_DISABLE_1BPP, CONFIG_NX_DISABLE_2BPP, +# CONFIG_NX_DISABLE_4BPP, CONFIG_NX_DISABLE_8BPP, +# CONFIG_NX_DISABLE_16BPP, CONFIG_NX_DISABLE_24BPP, and +# CONFIG_NX_DISABLE_32BPP +# NX supports a variety of pixel depths. You can save some +# memory by disabling support for unused color depths. +# CONFIG_NX_PACKEDMSFIRST +# If a pixel depth of less than 8-bits is used, then NX needs +# to know if the pixels pack from the MS to LS or from LS to MS +# CONFIG_NX_MOUSE +# Build in support for mouse input +# CONFIG_NX_KBD +# Build in support of keypad/keyboard input +# CONFIG_NXTK_BORDERWIDTH +# Specifies with with of the border (in pixels) used with +# framed windows. The default is 4. +# CONFIG_NXTK_BORDERCOLOR1 and CONFIG_NXTK_BORDERCOLOR2 +# Specify the colors of the border used with framed windows. +# CONFIG_NXTK_BORDERCOLOR2 is the shadow side color and so +# is normally darker. The default is medium and dark grey, +# respectively +# CONFIG_NXTK_AUTORAISE +# If set, a window will be raised to the top if the mouse position +# is over a visible portion of the window. Default: A mouse +# button must be clicked over a visible portion of the window. +# CONFIG_NXFONTS_CHARBITS +# The number of bits in the character set. Current options are +# only 7 and 8. The default is 7. +# CONFIG_NXFONT_SANS +# At present, there is only one font. But if there were were more, +# then this option would select the sans serif font. +# +# NX Multi-user only options: +# +# CONFIG_NX_BLOCKING +# Open the client message queues in blocking mode. In this case, +# nx_eventhandler() will not return until a message is received and processed. +# CONFIG_NX_MXSERVERMSGS and CONFIG_NX_MXCLIENTMSGS +# Specifies the maximum number of messages that can fit in +# the message queues. No additional resources are allocated, but +# this can be set to prevent flooding of the client or server with +# too many messages (CONFIG_PREALLOC_MQ_MSGS controls how many +# messages are pre-allocated). +# +CONFIG_NX=n +CONFIG_NX_MULTIUSER=n +CONFIG_NX_NPLANES=1 +CONFIG_NX_DISABLE_1BPP=y +CONFIG_NX_DISABLE_2BPP=y +CONFIG_NX_DISABLE_4BPP=y +CONFIG_NX_DISABLE_8BPP=n +CONFIG_NX_DISABLE_16BPP=y +CONFIG_NX_DISABLE_24BPP=y +CONFIG_NX_DISABLE_32BPP=y +CONFIG_NX_PACKEDMSFIRST=n +CONFIG_NX_MOUSE=y +CONFIG_NX_KBD=y +#CONFIG_NXTK_BORDERWIDTH=4 +#CONFIG_NXTK_BORDERCOLOR1 +#CONFIG_NXTK_BORDERCOLOR2 +CONFIG_NXTK_AUTORAISE=n +CONFIG_NXFONT_SANS=y +CONFIG_NXFONTS_CHARBITS=7 +CONFIG_NX_BLOCKING=y +CONFIG_NX_MXSERVERMSGS=32 +CONFIG_NX_MXCLIENTMSGS=16 + +# +# Settings for examples/poll +CONFIG_EXAMPLE_POLL_NOMAC=y +CONFIG_EXAMPLE_POLL_IPADDR=(10L<<24|0L<<16|0L<<8|2L) +CONFIG_EXAMPLE_POLL_DRIPADDR=(10L<<24|0L<<16|0L<<8|1L) +CONFIG_EXAMPLE_POLL_NETMASK=(255L<<24|255L<<16|255L<<8|0L) + +# +# Settings for examples/uip +CONFIG_EXAMPLE_UIP_IPADDR=(10L<<24|0L<<16|0L<<8|2L) +CONFIG_EXAMPLE_UIP_DRIPADDR=(10L<<24|0L<<16|0L<<8|1L) +CONFIG_EXAMPLE_UIP_NETMASK=(255L<<24|255L<<16|255L<<8|0L) +CONFIG_EXAMPLE_UIP_SMTP=n +CONFIG_EXAMPLE_UIP_TELNETD=n +CONFIG_EXAMPLE_UIP_WEBSERVER=y +CONFIG_EXAMPLE_UIP_DHCPC=n +CONFIG_EXAMPLE_UIP_WEBCLIENT=n + +# +# Settings for examples/nettest +# CONFIG_EXAMPLE_NETTEST_SERVER - The target board can act +# as either the client side or server side of the test +# CONFIG_EXAMPLE_NETTEST_PERFORMANCE - If set, then the +# client side simply receives messages forever, allowing +# measurement of throughput +# CONFIG_EXAMPLE_NETTEST_NOMAC - Set if the hardware has +# no MAC address; one will be assigned +# CONFIG_EXAMPLE_NETTEST_IPADDR - Target board IP address +# CONFIG_EXAMPLE_NETTEST_DRIPADDR - Default router address +# CONFIG_EXAMPLE_NETTEST_NETMASK - Network mask +# CONFIG_EXAMPLE_NETTEST_CLIENTIP - IP address of the +# client side of the test (may be target or host) +CONFIG_EXAMPLE_NETTEST_SERVER=n +CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n +CONFIG_EXAMPLE_NETTEST_NOMAC=y +CONFIG_EXAMPLE_NETTEST_IPADDR=(10L<<24|0L<<16|0L<<8|2L) +CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10L<<24|0L<<16|0L<<8|1L) +CONFIG_EXAMPLE_NETTEST_NETMASK=(255L<<24|255L<<16|255L<<8|0L) +CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10L<<24|0L<<16|0L<<8|1L) + +# +# Settings for examples/ostest +CONFIG_EXAMPLES_OSTEST_LOOPS=1 +CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048 +CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 + +# +# Settings for examples/nsh +# +# CONFIG_EXAMPLES_NSH_FILEIOSIZE - Size of a static I/O buffer +# CONFIG_EXAMPLES_NSH_STRERROR - Use strerror(errno) +# CONFIG_EXAMPLES_NSH_LINELEN - Maximum length of one command line +# CONFIG_EXAMPLES_NSH_STACKSIZE - Stack size to use for new threads. +# CONFIG_EXAMPLES_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi +# CONFIG_EXAMPLES_NSH_DISABLESCRIPT - Disable scripting support +# CONFIG_EXAMPLES_NSH_DISABLEBG - Disable background commands +# CONFIG_EXAMPLES_NSH_ROMFSETC - Use startup script in /etc +# CONFIG_EXAMPLES_NSH_CONSOLE - Use serial console front end +# CONFIG_EXAMPLES_NSH_TELNET - Use telnetd console front end +# +# If CONFIG_EXAMPLES_NSH_TELNET is selected: +# CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size +# CONFIG_EXAMPLES_NSH_DHCPC - Obtain address using DHCP +# CONFIG_EXAMPLES_NSH_IPADDR - Provides static IP address +# CONFIG_EXAMPLES_NSH_DRIPADDR - Provides static router IP address +# CONFIG_EXAMPLES_NSH_NETMASK - Provides static network mask +# CONFIG_EXAMPLES_NSH_NOMAC - Use a bogus MAC address +# +# If CONFIG_EXAMPLES_NSH_ROMFSETC is selected: +# CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT - ROMFS mountpoint +# CONFIG_EXAMPLES_NSH_INITSCRIPT - Relative path to init script +# CONFIG_EXAMPLES_NSH_ROMFSDEVNO - ROMFS RAM device minor +# CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE - ROMF sector size +# CONFIG_EXAMPLES_NSH_FATDEVNO - FAT FS RAM device minor +# CONFIG_EXAMPLES_NSH_FATSECTSIZE - FAT FS sector size +# CONFIG_EXAMPLES_NSH_FATNSECTORS - FAT FS number of sectors +# CONFIG_EXAMPLES_NSH_FATMOUNTPT - FAT FS mountpoint +CONFIG_EXAMPLES_NSH_FILEIOSIZE=512 +CONFIG_EXAMPLES_NSH_STRERROR=n +CONFIG_EXAMPLES_NSH_LINELEN=64 +CONFIG_EXAMPLES_NSH_STACKSIZE=1024 +CONFIG_EXAMPLES_NSH_NESTDEPTH=3 +CONFIG_EXAMPLES_NSH_DISABLESCRIPT=n +CONFIG_EXAMPLES_NSH_DISABLEBG=n +CONFIG_EXAMPLES_NSH_ROMFSETC=n +CONFIG_EXAMPLES_NSH_CONSOLE=y +CONFIG_EXAMPLES_NSH_TELNET=n +CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE=512 +CONFIG_EXAMPLES_NSH_DHCPC=n +CONFIG_EXAMPLES_NSH_NOMAC=y +CONFIG_EXAMPLES_NSH_IPADDR=(10L<<24|0L<<16|0L<<8|2L) +CONFIG_EXAMPLES_NSH_DRIPADDR=(10L<<24|0L<<16|0L<<8|1L) +CONFIG_EXAMPLES_NSH_NETMASK=(255L<<24|255L<<16|255L<<8|0L) +CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT="/etc" +CONFIG_EXAMPLES_NSH_INITSCRIPT="init.d/rcS" +CONFIG_EXAMPLES_NSH_ROMFSDEVNO=0 +CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE=64 +CONFIG_EXAMPLES_NSH_FATDEVNO=1 +CONFIG_EXAMPLES_NSH_FATSECTSIZE=512 +CONFIG_EXAMPLES_NSH_FATNSECTORS=1024 +CONFIG_EXAMPLES_NSH_FATMOUNTPT=/tmp + +# +# Architecture-specific NSH options +CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO=1 +CONFIG_EXAMPLES_NSH_MMCSDSLOTNO=0 +CONFIG_EXAMPLES_NSH_MMCSDMINOR=0 + +# +# Settings for examples/dhcpd +CONFIG_EXAMPLE_DHCPD_NOMAC=y +CONFIG_EXAMPLE_DHCPD_IPADDR=(10L<<24|0L<<16|0L<<8|1L) +CONFIG_EXAMPLE_DHCPD_DRIPADDR=(10L<<24|0L<<16|0L<<8|1L) +CONFIG_EXAMPLE_DHCPD_NETMASK=(255L<<24|255L<<16|255L<<8|0L) + +# +# Settings for examples/nx +# +# CONFIG_EXAMPLES_NX_VPLANE -- The plane to select from the frame- +# buffer driver for use in the test. Default: 0 +# CONFIG_EXAMPLES_NX_BGCOLOR -- The color of the background. Default depends on +# CONFIG_EXAMPLES_NX_BPP. +# CONFIG_EXAMPLES_NX_COLOR1 -- The color of window 1. Default depends on +# CONFIG_EXAMPLES_NX_BPP. +# CONFIG_EXAMPLES_NX_COLOR2 -- The color of window 2. Default depends on +# CONFIG_EXAMPLES_NX_BPP. +# CONFIG_EXAMPLES_NX_TBCOLOR -- The color of the toolbar. Default depends on +# CONFIG_EXAMPLES_NX_BPP. +# CONFIG_EXAMPLES_NX_FONTCOLOR -- The color of the toolbar. Default depends on +# CONFIG_EXAMPLES_NX_BPP. +# CONFIG_EXAMPLES_NX_BPP -- Pixels per pixel to use. Valid options +# include 2, 4, 8, 16, 24, and 32. Default is 32. +# CONFIG_EXAMPLES_NX_RAWWINDOWS -- Use raw windows; Default is to +# use pretty, framed NXTK windows with toolbars. +# CONFIG_EXAMPLES_NX_STACKSIZE -- The stacksize to use when creating +# the NX server. Default 2048 +# CONFIG_EXAMPLES_NX_CLIENTPRIO -- The client priority. Default: 80 +# CONFIG_EXAMPLES_NX_SERVERPRIO -- The server priority. Default: 120 +# CONFIG_EXAMPLES_NX_NOTIFYSIGNO -- The signal number to use with +# nx_eventnotify(). Default: 4 +CONFIG_EXAMPLES_NX_VPLANE=0 +#CONFIG_EXAMPLES_NX_BGCOLOR +#CONFIG_EXAMPLES_NX_COLOR1 +#CONFIG_EXAMPLES_NX_COLOR2 +#CONFIG_EXAMPLES_NX_TBCOLOR +#CONFIG_EXAMPLES_NX_FONTCOLOR +CONFIG_EXAMPLES_NX_BPP=CONFIG_SIM_FBBPP +CONFIG_EXAMPLES_NX_RAWWINDOWS=n +CONFIG_EXAMPLES_NX_STACKSIZE=8192 +CONFIG_EXAMPLES_NX_CLIENTPRIO=80 +CONFIG_EXAMPLES_NX_SERVERPRIO=120 +CONFIG_EXAMPLES_NX_NOTIFYSIGNO=4 + +# +# Settings for examples/mount +CONFIG_EXAMPLES_MOUNT_DEVNAME="/dev/ram0" +#CONFIG_EXAMPLES_MOUNT_NSECTORS=2048 +#CONFIG_EXAMPLES_MOUNT_SECTORSIZE=512 +#CONFIG_EXAMPLES_MOUNT_RAMDEVNO=1 + +# +# Stack and heap information +# +# CONFIG_BOOT_FROM_FLASH - Some configurations support XIP +# operation from FLASH. +# CONFIG_CUSTOM_STACK - The up_ implementation will handle +# all stack operations outside of the nuttx model. +# CONFIG_STACK_POINTER - The initial stack pointer +# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack. +# This is the thread that (1) performs the inital boot of the system up +# to the point where user_start() is spawned, and (2) there after is the +# IDLE thread that executes only when there is no other thread ready to +# run. +# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate +# for the main user thread that begins at the user_start() entry point. +# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size +# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size +# CONFIG_HEAP_BASE - The beginning of the heap +# CONFIG_HEAP_SIZE - The size of the heap +# +CONFIG_BOOT_FROM_FLASH=n +CONFIG_CUSTOM_STACK=n +CONFIG_STACK_POINTER= +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=1024 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=1024 +CONFIG_HEAP_BASE= +CONFIG_HEAP_SIZE= diff --git a/nuttx/configs/ez80f910200zco/httpd/httpd.linkcmd b/nuttx/configs/ez80f910200zco/httpd/httpd.linkcmd new file mode 100755 index 000000000..19910368d --- /dev/null +++ b/nuttx/configs/ez80f910200zco/httpd/httpd.linkcmd @@ -0,0 +1,94 @@ +/****************************************************************************/ +/* configs/ez80f910200zco/httpd/httpd.linkcmd */ +/* */ +/* Copyright (C) 2009 Gregory Nutt. All rights reserved. */ +/* Author: Gregory Nutt */ +/* */ +/* Redistribution and use in source and binary forms, with or without */ +/* modification, are permitted provided that the following conditions */ +/* are met: */ +/* */ +/* 1. Redistributions of source code must retain the above copyright */ +/* notice, this list of conditions and the following disclaimer. */ +/* 2. Redistributions in binary form must reproduce the above copyright */ +/* notice, this list of conditions and the following disclaimer in */ +/* the documentation and/or other materials provided with the */ +/* distribution. */ +/* 3. Neither the name NuttX nor the names of its contributors may be */ +/* used to endorse or promote products derived from this software */ +/* without specific prior written permission. */ +/* */ +/* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS */ +/* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT */ +/* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS */ +/* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE */ +/* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, */ +/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, */ +/* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS */ +/* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED */ +/* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT */ +/* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN */ +/* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE */ +/* POSSIBILITY OF SUCH DAMAGE. */ +/* */ +/****************************************************************************/ + +-FORMAT=OMF695,INTEL32 +-map -maxhexlen=64 -quiet -NOwarnoverlap -xref -unresolved=fatal +-sort ADDRESS=ascending -warn -NOdebug -NOigcase + +RANGE ROM $000000 : $03FFFF +RANGE RAM $B80000 : $BFFFFF +RANGE EXTIO $000000 : $00FFFF +RANGE INTIO $000000 : $0000FF + +CHANGE STRSECT is ROM + +ORDER .RESET,.IVECTS,.STARTUP,CODE,DATA +COPY DATA ROM + +DEFINE __low_romdata = copy base of DATA +DEFINE __low_data = base of DATA +DEFINE __len_data = length of DATA +DEFINE __low_bss = base of BSS +DEFINE __len_bss = length of BSS +DEFINE __stack = highaddr of RAM + 1 +DEFINE __heaptop = highaddr of RAM +DEFINE __heapbot = top of RAM + 1 +DEFINE __low_romcode = copy base of CODE +DEFINE __low_code = base of CODE +DEFINE __len_code = length of CODE +DEFINE __copy_code_to_ram = 0 +DEFINE __crtl = 1 +DEFINE __CS0_LBR_INIT_PARAM = $10 +DEFINE __CS0_UBR_INIT_PARAM = $1f +DEFINE __CS0_CTL_INIT_PARAM = $a8 +DEFINE __CS0_BMC_INIT_PARAM = $02 +DEFINE __CS1_LBR_INIT_PARAM = $c0 +DEFINE __CS1_UBR_INIT_PARAM = $c7 +DEFINE __CS1_CTL_INIT_PARAM = $28 +DEFINE __CS1_BMC_INIT_PARAM = $02 +DEFINE __CS2_LBR_INIT_PARAM = $80 +DEFINE __CS2_UBR_INIT_PARAM = $bf +DEFINE __CS2_CTL_INIT_PARAM = $28 +DEFINE __CS2_BMC_INIT_PARAM = $81 +DEFINE __CS3_LBR_INIT_PARAM = $00 +DEFINE __CS3_UBR_INIT_PARAM = $00 +DEFINE __CS3_CTL_INIT_PARAM = $00 +DEFINE __CS3_BMC_INIT_PARAM = $02 +DEFINE __RAM_CTL_INIT_PARAM = $C0 +DEFINE __RAM_ADDR_U_INIT_PARAM = $B7 +DEFINE __FLASH_CTL_INIT_PARAM = $68 +DEFINE __FLASH_ADDR_U_INIT_PARAM = $00 + +define _SYS_CLK_FREQ = 50000000 + +define _OSC_FREQ = 50000000 +define _SYS_CLK_SRC = 0 +define _OSC_FREQ_MULT = 1 +define __PLL_CTL0_INIT_PARAM = $40 + +define _zsl_g_clock_xdefine = 50000000 + +/* arch/z80/src/Makefile.zdsii will append target, object and library paths below */ + diff --git a/nuttx/configs/ez80f910200zco/httpd/httpd.zdsproj b/nuttx/configs/ez80f910200zco/httpd/httpd.zdsproj new file mode 100755 index 000000000..3c826277d --- /dev/null +++ b/nuttx/configs/ez80f910200zco/httpd/httpd.zdsproj @@ -0,0 +1,247 @@ + +eZ80F91 + + + +..\..\..\nuttx.hex + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/nuttx/configs/ez80f910200zco/httpd/setenv.sh b/nuttx/configs/ez80f910200zco/httpd/setenv.sh new file mode 100755 index 000000000..2cdf7b9f6 --- /dev/null +++ b/nuttx/configs/ez80f910200zco/httpd/setenv.sh @@ -0,0 +1,52 @@ +#!/bin/bash +# configs/ez80f910200zco/dhcpd/setenv.sh +# +# Copyright (C) 2009 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +# Check how we were executed +# +if [ "$(basename $0)" = "setenv.sh" ] ; then + echo "You must source this script, not run it!" 1>&2 + exit 1 +fi + +# +# The ZDS-II toolchain lies outside of the Cygwin "sandbox" and +# attempts to set the PATH variable do not have the desired effect. +# Instead, alias are provided for all of the ZDS-II command line tools. +# Version 4.10.1 installed in the default location is assumed here. +# +ZDSBINDIR="C:/Program\ Files/ZiLOG/ZDSII_eZ80Acclaim!_4.11.1/bin" +alias ez8asm="${ZDSBINDIR}/ez8asm.exe" +alias ez8cc="${ZDSBINDIR}/ez8cc.exe" +alias ez8lib="${ZDSBINDIR}/ez8lib.exe" +alias ez8link="${ZDSBINDIR}/ez8link.exe" +