phone-side
/
nuttx-bb
9
0
Fork 0
Code Releases Activity

Some improvements in PIC32 USB BDT handling 

git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@4454 7fd9a85b-ad96-42d3-883c-3090e2eb8679
This commit is contained in:
patacongo 2012-03-05 21:02:07 +00:00
parent d3f1f768f6
commit 83cbdf0bd8
1 changed files with 111 additions and 58 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

169
nuttx/arch/mips/src/pic32mx/pic32mx-usbdev.c
View File

@ -364,7 +364,6 @@ struct pic32mx_ep_s
struct pic32mx_req_s *tail;
uint8_t stalled:1; /* true: Endpoint is stalled */
uint8_t halted:1; /* true: Endpoint feature halted */
uint8_t txbusy:1; /* true: TX endpoint FIFO full */
uint8_t txnullpkt:1; /* Null packet needed at end of TX transfer */
uint8_t txdata1:1; /* Data0/1 of next TX transfer */
uint8_t rxdata1:1; /* Data0/1 of next RX transfer */
@ -429,6 +428,7 @@ static inline void
struct pic32mx_req_s *privreq, int16_t result);
static void pic32mx_reqcomplete(struct pic32mx_ep_s *privep, int16_t result);
static void pic32mx_epwrite(struct pic32mx_ep_s *privep,
volatile struct usbotg_bdtentry_s *bdt,
const uint8_t *src, uint32_t nbytes);
static void pic32mx_wrcomplete(struct pic32mx_usbdev_s *priv,
struct pic32mx_ep_s *privep);
@ -750,10 +750,10 @@ static void pic32mx_reqcomplete(struct pic32mx_ep_s *privep, int16_t result)
* Name: pic32mx_epwrite
****************************************************************************/
static void pic32mx_epwrite(struct pic32mx_ep_s *privep, const uint8_t *src,
uint32_t nbytes)
static void pic32mx_epwrite(struct pic32mx_ep_s *privep,
volatile struct usbotg_bdtentry_s *bdt,
const uint8_t *src, uint32_t nbytes)
{
volatile struct usbotg_bdtentry_s *bdt = privep->bdtin;
uint32_t status;
usbtrace(TRACE_WRITE(USB_EPNO(privep->ep.eplog)), nbytes);
@ -786,12 +786,6 @@ static void pic32mx_epwrite(struct pic32mx_ep_s *privep, const uint8_t *src,
USB_EPNO(privep->ep.eplog), bdt, status, bdt->addr);
bdt->status = status;
/* Indicate that there is TX data inflight. This will be cleared
* when the next data out interrupt is received.
*/
privep->txbusy = true;
}
/****************************************************************************
@ -826,9 +820,16 @@ static void pic32mx_wrcomplete(struct pic32mx_usbdev_s *priv,
bdtdbg("EP%d BDT IN [%p] {%08x, %08x}\n",
epno, bdtin, bdtin->status, bdtin->addr);
/* We should own the BDT that just completed */
/* We should own the BDT that just completed. But NULLify the entire BDT IN.
* Why? So that we can tell later that the BDT available. No, it is not
* sufficient to look at the UOWN bit. If UOWN==0, then the transfer has
* been completed BUT it may not yet have been processed. But a completely
* NULLified BDT is a sure indication
*/
DEBUGASSERT((bdtin->status & USB_BDT_UOWN) == USB_BDT_COWN);
bdtin->status = 0;
bdtin->addr = 0;
/* Toggle bdtin to the other BDT. Is the current bdtin the EVEN bdt? */
@ -882,7 +883,6 @@ static void pic32mx_wrrestart(struct pic32mx_usbdev_s *priv,
/* Reset some endpoint state variables */
privep->txnullpkt = false;
privep->txbusy = false;
/* Check the request from the head of the endpoint request queue */
@ -903,18 +903,17 @@ static void pic32mx_wrrestart(struct pic32mx_usbdev_s *priv,
static int pic32mx_wrrequest(struct pic32mx_usbdev_s *priv, struct pic32mx_ep_s *privep)
{
volatile struct usbotg_bdtentry_s *bdt;
struct pic32mx_req_s *privreq;
uint8_t *buf;
uint8_t epno;
int nbytes;
int bytesleft;
/* We get here when an IN endpoint interrupt occurs. So now we know that
* there is no TX transfer in progress.
/* We get here when either (1) an IN endpoint completion interrupt occurs,
* or (2) a new write request is reqeived from the class.
*/
privep->txbusy = false;
/* Get the endpoint number that we are servicing */
epno = USB_EPNO(privep->ep.eplog);
@ -924,21 +923,50 @@ static int pic32mx_wrrequest(struct pic32mx_usbdev_s *priv, struct pic32mx_ep_s
privreq = pic32mx_rqpeek(privep);
if (!privreq)
{
/* There is no TX transfer in progress and no new pending TX
* requests to send.
*/
/* There are no queue TX requests to be sent. */
usbtrace(TRACE_INTDECODE(PIC32MX_TRACEINTID_EPINQEMPTY), epno);
/* Special case endpoint zero. If there is nothing to be sent, then
* we need to configure to received the next SETUP packet.
/* Return -ENODATA to indicate that there are no further requests
* to be processed.
*/
if (epno == 0)
return -ENODATA;
}
/* Decide which BDT to use. bdtin points to the "current" BDT. That is,
* the one that either (1) avaialble for next transfer, or (2) the one
* that is currently busy with the current transfer. If the current
* BDT is busy, we have the option of setting up the other BDT in advance
* in order to improve data transfer performance.
*/
bdt = privep->bdtin;
if (bdt->status || bdt->addr)
{
/* The current BDT is not available, check the other BDT */
volatile struct usbotg_bdtentry_s *otherbdt;
otherbdt = &g_bdt[EP(epno, EP_DIR_IN, EP_PP_EVEN)];
if (otherbdt == bdt)
{
priv->ctrlstate = CTRLSTATE_WAITSETUP;
otherbdt++;
}
return OK;
/* Is it available? */
if (otherbdt->status || otherbdt->addr)
{
/* No, neither are available. We cannot perform the transfer now.
* Return -EBUSY to indicate this condition.
*/
return -EBUSY;
}
/* Yes... use the other BDT */
bdt = otherbdt;
}
ullvdbg("epno=%d req=%p: len=%d xfrd=%d nullpkt=%d\n",
@ -981,7 +1009,7 @@ static int pic32mx_wrrequest(struct pic32mx_usbdev_s *priv, struct pic32mx_ep_s
/* Setup the writes to the endpoints */
pic32mx_epwrite(privep, buf, nbytes);
pic32mx_epwrite(privep, privep->bdtin, buf, nbytes);
/* Special case endpoint 0 state information. The write request is in
* progress.
@ -1055,6 +1083,15 @@ static int pic32mx_rdcomplete(struct pic32mx_usbdev_s *priv,
pic32mx_reqcomplete(privep, OK);
}
/* Nullify the BDT entry that just completed. Why? So that we can tell later
* that the BDT has been processed. No, it is not sufficient to look at the
* UOWN bit. If UOWN==0, then the transfer has been completed BUT it may not
* yet have been processed.
*/
bdtout->status = 0;
bdtout->addr = 0;
/* Toggle bdtout to the other BDT. Is the current bdtout the EVEN bdt? */
privep->bdtout = &g_bdt[EP_OUT_EVEN(epno)];
@ -1104,24 +1141,37 @@ static int pic32mx_ep0rdsetup(struct pic32mx_usbdev_s *priv, uint8_t *dest,
if (!priv->rxbusy)
{
/* Nullify all BDT OUT entries. Why? So that we can tell later
* that the BDT available. No, it is not sufficient to look at the
* UOWN bit. If UOWN==0, then the transfer has been completed BUT
* it may not yet have been processed. But a completely NULLified
* BDT is a sure indication
*/
bdtout->status = 0;
bdtout->addr = 0;
otherbdt->status = 0;
otherbdt->addr = 0;
/* Reset the other BDT to zero... this will cause any attempted use
* of the other BDT to be NAKed. Set the first DATA0/1 value to 1.
*/
otherbdt->status = 0;
privep->rxdata1 = 1;
}
/* Otherwise, there are RX transfers in progress. bdtout may be
* unavailable now. In that case, we are free to setup the other BDT
* in order to improve performance.
* in order to improve performance. NOTE: That we check if the
* entire BDT has been NULLified. That is the only sure indication
* that the BDT is available (see above).
*/
if ((bdtout->status & USB_BDT_UOWN) != USB_BDT_COWN)
if (bdtout->status || bdtout->addr)
{
/* bdtout is not available. Is the other BDT available? */
if ((otherbdt->status & USB_BDT_UOWN) != USB_BDT_COWN)
if (otherbdt->status || otherbdt->addr)
{
/* Neither are available... we cannot accept the request now */
@ -1135,12 +1185,6 @@ static int pic32mx_ep0rdsetup(struct pic32mx_usbdev_s *priv, uint8_t *dest,
usbtrace(TRACE_READ(EP0), readlen);
/* Clear status bits (making sure that UOWN is cleared before doing anything
* else).
*/
bdtout->status = 0;
/* Get the correct data toggle (as well as other BDT bits) */
if (privep->rxdata1)
@ -1189,10 +1233,16 @@ static int pic32mx_rdsetup(struct pic32mx_ep_s *privep, uint8_t *dest, int readl
/* bdtout refers to the next ping-pong BDT to use. However, bdtout may be
* unavailable now. But, in that case, we are free to setup the other BDT
* in order to improve performance.
*
* Note that we NULLify the BDT OUT entries. This is so that we can tell
* that the BDT readlly available. No, it is not sufficient to look at the
* UOWN bit. If UOWN==0, then the transfer has been completed BUT it may
* not yet have been processed. But a completely NULLified BDT is a sure
* indication
*/
bdtout = privep->bdtout;
if ((bdtout->status & USB_BDT_UOWN) != USB_BDT_COWN)
if (bdtout->status || bdtout->addr)
{
/* Is the current BDT the EVEN BDT? */
@ -1206,7 +1256,7 @@ static int pic32mx_rdsetup(struct pic32mx_ep_s *privep, uint8_t *dest, int readl
/* Is the other BDT available? */
if ((otherbdt->status & USB_BDT_UOWN) != USB_BDT_COWN)
if (otherbdt->status || otherbdt->addr)
{
/* Neither are available... we cannot accept the request now */
@ -1454,7 +1504,7 @@ static void pic32mx_eptransfer(struct pic32mx_usbdev_s *priv, uint8_t epno,
/* Handle additional queued write requests */
pic32mx_wrrequest(priv, privep);
(void)pic32mx_wrrequest(priv, privep);
}
}
@ -1593,7 +1643,6 @@ static void pic32mx_ep0setup(struct pic32mx_usbdev_s *priv)
*/
ep0->stalled = false;
ep0->txbusy = false;
ep0->rxdata1 = 0;
ep0->txdata1 = 1;
@ -2079,7 +2128,7 @@ resume_packet_processing:
/* Send the EP0 SETUP response (might be a zero-length packet) */
pic32mx_epwrite(&priv->eplist[EP0], response.b, nbytes);
pic32mx_epwrite(ep0, ep0->bdtin, response.b, nbytes);
priv->ctrlstate = CTRLSTATE_WAITSETUP;
}
@ -2108,10 +2157,7 @@ static void pic32mx_ep0incomplete(struct pic32mx_usbdev_s *priv)
struct pic32mx_ep_s *ep0 = &priv->eplist[EP0];
volatile struct usbotg_bdtentry_s *bdtlast;
volatile struct usbotg_bdtentry_s *bdtnext;
/* An EP0 OUT transfer has just completed */
ep0->txbusy = false;
int ret;
/* Get the last and the next IN BDT */
@ -2126,7 +2172,7 @@ static void pic32mx_ep0incomplete(struct pic32mx_usbdev_s *priv)
bdtnext = &g_bdt[EP0_IN_EVEN];
}
/* Make sure that we own the last BDTs. */
/* Make sure that we own the last BDT. */
bdtlast->status = 0;
bdtlast->addr = 0;
@ -2147,11 +2193,22 @@ static void pic32mx_ep0incomplete(struct pic32mx_usbdev_s *priv)
pic32mx_wrcomplete(priv, &priv->eplist[EP0]);
/* Handle the next queue IN transfer. If there are no further IN
* transfers, pic32mx_wrrequest will set ctrlstate = CTRLSTATE_WAITSETUP
/* Handle the next queue IN transfer. If there are no further queued
* IN transfers, pic32mx_wrrequest will return -ENODATA and that is the
* only expected error return value in this context.
*/
(void)pic32mx_wrrequest(priv, &priv->eplist[EP0]);
ret = pic32mx_wrrequest(priv, &priv->eplist[EP0]);
if (ret < 0)
{
DEBUGASSERT(ret == -ENODATA);
/* If there is nothing to be sent, then we need to configure to
* receive the next SETUP packet.
*/
priv->ctrlstate = CTRLSTATE_WAITSETUP;
}
}
/* No.. Are we processing the completion of a status response? */
@ -2276,7 +2333,7 @@ static void pic32mx_ep0transfer(struct pic32mx_usbdev_s *priv, uint16_t ustat)
/* It was an EP0 OUT transaction. Get the index to the BDT. */
index = ((ustat & USB_STAT_PPBI) == 0 ? EP0_OUT_EVEN : EP0_OUT_ODD);
bdt = &g_bdt[index];
bdt = &g_bdt[index];
priv->eplist[0].bdtout = bdt;
bdtdbg("EP0 BDT OUT [%p] {%08x, %08x}\n", bdt, bdt->status, bdt->addr);
@ -2869,7 +2926,7 @@ static int pic32mx_epconfigure(struct usbdev_ep_s *ep,
{
/* Get the pointer to BDT entry */
index = EP(epno, 1, 0);
index = EP(epno, EP_DIR_IN, EP_PP_EVEN);
bdt = &g_bdt[index];
privep->bdtin = bdt;
@ -2891,7 +2948,7 @@ static int pic32mx_epconfigure(struct usbdev_ep_s *ep,
if (!epin || bidi)
{
index = EP(epno, 0, 0);
index = EP(epno, EP_DIR_OUT, EP_PP_EVEN);
bdt = &g_bdt[index];
privep->bdtout = bdt;
@ -2971,7 +3028,7 @@ static int pic32mx_epdisable(struct usbdev_ep_s *ep)
* 32-bit words per BDT.
*/
ptr = (uint32_t*)&g_bdt[EP(epno, 0, 0)];
ptr = (uint32_t*)&g_bdt[EP(epno, EP_DIR_OUT, EP_PP_EVEN)];
for (i = 0; i < USB_BDT_WORD_SIZE * USB_NBDTS_PER_EP; i++)
{
*ptr++ = 0;
@ -3092,12 +3149,9 @@ static int pic32mx_epsubmit(struct usbdev_ep_s *ep, struct usbdev_req_s *req)
pic32mx_rqenqueue(privep, privreq);
usbtrace(TRACE_INREQQUEUED(epno), req->len);
/* If the IN endpoint FIFO is available, then transfer the data now */
/* If an IN endpoint BDT is available, then transfer the data now */
if (!privep->txbusy)
{
ret = pic32mx_wrrequest(priv, privep);
}
(void)pic32mx_wrrequest(priv, privep);
}
/* Handle OUT (host-to-device) requests */
@ -3709,7 +3763,6 @@ static void pic32mx_swreset(struct pic32mx_usbdev_s *priv)
privep->stalled = false;
privep->halted = false;
privep->txbusy = false;
privep->txnullpkt = false;
}