diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog
index 73ac116cc..85d2953a6 100644
--- a/nuttx/ChangeLog
+++ b/nuttx/ChangeLog
@@ -947,3 +947,8 @@
 	  range!
 
 0.4.14 2009-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
+
+	* arch/arm/src/stm32/stm32_gpio.c - Add support for configure an input GPIO
+	  to generate an EXTI interrupt.
+	* config/stm3210e-eval/src/up_buttons.c - Add support for on-board buttons.
+
diff --git a/nuttx/Documentation/NuttX.html b/nuttx/Documentation/NuttX.html
index 04b671484..efa24c38e 100644
--- a/nuttx/Documentation/NuttX.html
+++ b/nuttx/Documentation/NuttX.html
@@ -8,7 +8,7 @@
   <tr align="center" bgcolor="#e4e4e4">
     <td>
       <h1><big><font color="#3c34ec"><i>NuttX RTOS</i></font></big></h1>
-      <p>Last Updated: October 30, 2009</p>
+      <p>Last Updated: November 5, 2009</p>
     </td>
   </tr>
 </table>
@@ -1596,6 +1596,10 @@ buildroot-0.1.7 2009-06-26 &lt;spudmonkey@racsa.co.cr&gt;
 <ul><pre>
 nuttx-0.4.14 2009-xx-xx Gregory Nutt &lt;spudmonkey@racsa.co.cr&gt;
 
+	* arch/arm/src/stm32/stm32_gpio.c - Add support for configure an input GPIO
+	  to generate an EXTI interrupt.
+	* config/stm3210e-eval/src/up_buttons.c - Add support for on-board buttons.
+
 pascal-0.1.3 2009-xx-xx Gregory Nutt &lt;spudmonkey@racsa.co.cr&gt;
 
 buildroot-0.1.8 2009-xx-xx &lt;spudmonkey@racsa.co.cr&gt;
diff --git a/nuttx/arch/arm/src/stm32/stm32_gpio.c b/nuttx/arch/arm/src/stm32/stm32_gpio.c
index 454e83351..10bf482cb 100755
--- a/nuttx/arch/arm/src/stm32/stm32_gpio.c
+++ b/nuttx/arch/arm/src/stm32/stm32_gpio.c
@@ -203,9 +203,24 @@ int stm32_configgpio(uint32 cfgset)
         }
       else
         {
-          /* It is an input pin... If it is pull-down or pull up,
-           * then we need to set the ODR appropriately for that
-           * function.
+          /* It is an input pin... Should it configured as an EXTI interrupt? */
+
+          if ((cfgset & GPIO_EXTI) != 0)
+            {
+               int shift;
+
+               /* Yes.. Set the bits in the EXTI CR register */
+
+               regaddr = STM32_AFIO_EXTICR(pin);
+               regval  = getreg32(regaddr);
+               shift   = AFIO_EXTICR_EXTI_SHIFT(pin);
+               regval &= ~(AFIO_EXTICR_PORT_MASK << shift);
+               regval |= (((uint32)port) << shift);
+               putreg32(regval, regaddr);
+            }
+
+          /* If it is pull-down or pull up, then we need to set the ODR
+           * appropriately for that function.
            */
         
           if ((cfgset & GPIO_CNF_MASK) == GPIO_CNF_INPULLUP)
diff --git a/nuttx/arch/arm/src/stm32/stm32_gpio.h b/nuttx/arch/arm/src/stm32/stm32_gpio.h
index 37cdbba6b..c18d31557 100644
--- a/nuttx/arch/arm/src/stm32/stm32_gpio.h
+++ b/nuttx/arch/arm/src/stm32/stm32_gpio.h
@@ -62,6 +62,7 @@
 
 #define STM32_AFIO_EVCR_OFFSET       0x0000  /* Event control register */
 #define STM32_AFIO_MAPR_OFFSET       0x0004  /* AF remap and debug I/O configuration register */
+#define STM32_AFIO_EXTICR_OFFSET(p)  (0x0008 + ((p) >> 2))
 #define STM32_AFIO_EXTICR1_OFFSET    0x0008  /* External interrupt configuration register 1 */
 #define STM32_AFIO_EXTICR2_OFFSET    0x000c  /* External interrupt configuration register 2 */
 #define STM32_AFIO_EXTICR3_OFFSET    0x0010  /* External interrupt configuration register 3 */
@@ -141,6 +142,7 @@
 
 #define STM32_AFIO_EVCR              (STM32_AFIO_BASE+STM32_AFIO_EVCR_OFFSET)
 #define STM32_AFIO_MAPR              (STM32_AFIO_BASE+STM32_AFIO_MAPR_OFFSET)
+#define STM32_AFIO_EXTICR(p)         (STM32_AFIO_BASE+STM32_AFIO_EXTICR_OFFSET(p))
 #define STM32_AFIO_EXTICR1           (STM32_AFIO_BASE+STM32_AFIO_EXTICR1_OFFSET)
 #define STM32_AFIO_EXTICR2           (STM32_AFIO_BASE+STM32_AFIO_EXTICR3_OFFSET)
 #define STM32_AFIO_EXTICR3           (STM32_AFIO_BASE+STM32_AFIO_EXTICR3_OFFSET)
@@ -312,53 +314,59 @@
 
 /* External interrupt configuration register 1 */
 
+#define AFIO_EXTICR_PORT_MASK        (0x0f)
+#define AFIO_EXTICR_EXTI_SHIFT(g)    (((g) & 3) << 2)
+#define AFIO_EXTICR_EXTI_MASK(g)     (AFIO_EXTICR_PORT_MASK << (AFIO_EXTICR_EXTI_SHIFT(g)))
+
 #define AFIO_EXTICR1_EXTI0_SHIFT     (0)       /* Bits 3-0: EXTI 0 configuration */
-#define AFIO_EXTICR1_EXTI0_MASK      (0x0f << AFIO_EXTICR1_EXTI0_SHIFT)
+#define AFIO_EXTICR1_EXTI0_MASK      (AFIO_EXTICR_PORT_MASK << AFIO_EXTICR1_EXTI0_SHIFT)
 #define AFIO_EXTICR1_EXTI1_SHIFT     (4)       /* Bits 7-4: EXTI 1 configuration */
-#define AFIO_EXTICR1_EXTI1_MASK      (0x0f << AFIO_EXTICR1_EXTI1_SHIFT)
+#define AFIO_EXTICR1_EXTI1_MASK      (AFIO_EXTICR_PORT_MASK << AFIO_EXTICR1_EXTI1_SHIFT)
 #define AFIO_EXTICR1_EXTI2_SHIFT     (8)       /* Bits 11-8: EXTI 2 configuration */
-#define AFIO_EXTICR1_EXTI2_MASK      (0x0f << AFIO_EXTICR1_EXTI2_SHIFT)
+#define AFIO_EXTICR1_EXTI2_MASK      (AFIO_EXTICR_PORT_MASK << AFIO_EXTICR1_EXTI2_SHIFT)
 #define AFIO_EXTICR1_EXTI3_SHIFT     (12)      /* Bits 15-12: EXTI 3 configuration */
-#define AFIO_EXTICR1_EXTI3_MASK      (0x0f << AFIO_EXTICR1_EXTI3_SHIFT)
+#define AFIO_EXTICR1_EXTI3_MASK      (AFIO_EXTICR_PORT_MASK << AFIO_EXTICR1_EXTI3_SHIFT)
 
 #define AFIO_EXTICR_PORTA            (0)       /* 0000: PA[x] pin */
 #define AFIO_EXTICR_PORTB            (1)       /* 0001: PB[x] pin */
 #define AFIO_EXTICR_PORTC            (2)       /* 0010: PC[x] pin */
 #define AFIO_EXTICR_PORTD            (3)       /* 0011: PD[x] pin */
 #define AFIO_EXTICR_PORTE            (4)       /* 0100: PE[x] pin */
+#define AFIO_EXTICR_PORTF            (5)       /* 0101: PF[x] pin */
+#define AFIO_EXTICR_PORTG            (6)       /* 0110: PG[x] pin */
 
 /* External interrupt configuration register 2 */
 
 #define AFIO_EXTICR2_EXTI4_SHIFT     (0)       /* Bits 3-0: EXTI 4 configuration */
-#define AFIO_EXTICR2_EXTI4_MASK      (0x0f << AFIO_EXTICR2_EXTI4_SHIFT)
+#define AFIO_EXTICR2_EXTI4_MASK      (AFIO_EXTICR_PORT_MASK << AFIO_EXTICR2_EXTI4_SHIFT)
 #define AFIO_EXTICR2_EXTI5_SHIFT     (4)       /* Bits 7-4: EXTI 5 configuration */
-#define AFIO_EXTICR2_EXTI5_MASK      (0x0f << AFIO_EXTICR2_EXTI5_SHIFT)
+#define AFIO_EXTICR2_EXTI5_MASK      (AFIO_EXTICR_PORT_MASK << AFIO_EXTICR2_EXTI5_SHIFT)
 #define AFIO_EXTICR2_EXTI6_SHIFT     (8)       /* Bits 11-8: EXTI 6 configuration */
-#define AFIO_EXTICR2_EXTI6_MASK      (0x0f << AFIO_EXTICR2_EXTI6_SHIFT)
+#define AFIO_EXTICR2_EXTI6_MASK      (AFIO_EXTICR_PORT_MASK << AFIO_EXTICR2_EXTI6_SHIFT)
 #define AFIO_EXTICR2_EXTI7_SHIFT     (12)      /* Bits 15-12: EXTI 7 configuration */
-#define AFIO_EXTICR2_EXTI7_MASK      (0x0f << AFIO_EXTICR2_EXTI7_SHIFT)
+#define AFIO_EXTICR2_EXTI7_MASK      (AFIO_EXTICR_PORT_MASK << AFIO_EXTICR2_EXTI7_SHIFT)
 
 /* External interrupt configuration register 3 */
 
 #define AFIO_EXTICR3_EXTI8_SHIFT     (0)       /* Bits 3-0: EXTI 8 configuration */
-#define AFIO_EXTICR3_EXTI8_MASK      (0x0f << AFIO_EXTICR3_EXTI8_SHIFT)
+#define AFIO_EXTICR3_EXTI8_MASK      (AFIO_EXTICR_PORT_MASK << AFIO_EXTICR3_EXTI8_SHIFT)
 #define AFIO_EXTICR3_EXTI9_SHIFT     (4)       /* Bits 7-4: EXTI 9 configuration */
-#define AFIO_EXTICR3_EXTI9_MASK      (0x0f << AFIO_EXTICR3_EXTI9_SHIFT)
+#define AFIO_EXTICR3_EXTI9_MASK      (AFIO_EXTICR_PORT_MASK << AFIO_EXTICR3_EXTI9_SHIFT)
 #define AFIO_EXTICR3_EXTI10_SHIFT    (8)       /* Bits 11-8: EXTI 10 configuration */
-#define AFIO_EXTICR3_EXTI10_MASK     (0x0f << AFIO_EXTICR3_EXTI10_SHIFT)
+#define AFIO_EXTICR3_EXTI10_MASK     (AFIO_EXTICR_PORT_MASK << AFIO_EXTICR3_EXTI10_SHIFT)
 #define AFIO_EXTICR3_EXTI11_SHIFT    (12)      /* Bits 15-12: EXTI 11 configuration */
-#define AFIO_EXTICR3_EXTI11_MASK     (0x0f << AFIO_EXTICR3_EXTI11_SHIFT)
+#define AFIO_EXTICR3_EXTI11_MASK     (AFIO_EXTICR_PORT_MASK << AFIO_EXTICR3_EXTI11_SHIFT)
 
 /* External interrupt configuration register 4 */
 
 #define AFIO_EXTICR4_EXTI12_SHIFT    (0)       /* Bits 3-0: EXTI 12 configuration */
-#define AFIO_EXTICR4_EXTI12_MASK     (0x0f << AFIO_EXTICR4_EXTI12_SHIFT)
+#define AFIO_EXTICR4_EXTI12_MASK     (AFIO_EXTICR_PORT_MASK << AFIO_EXTICR4_EXTI12_SHIFT)
 #define AFIO_EXTICR4_EXTI13_SHIFT    (4)       /* Bits 7-4: EXTI 13 configuration */
-#define AFIO_EXTICR4_EXTI13_MASK     (0x0f << AFIO_EXTICR4_EXTI13_SHIFT)
+#define AFIO_EXTICR4_EXTI13_MASK     (AFIO_EXTICR_PORT_MASK << AFIO_EXTICR4_EXTI13_SHIFT)
 #define AFIO_EXTICR4_EXTI14_SHIFT    (8)       /* Bits 11-8: EXTI 14 configuration */
-#define AFIO_EXTICR4_EXTI14_MASK     (0x0f << AFIO_EXTICR4_EXTI14_SHIFT)
+#define AFIO_EXTICR4_EXTI14_MASK     (AFIO_EXTICR_PORT_MASK << AFIO_EXTICR4_EXTI14_SHIFT)
 #define AFIO_EXTICR4_EXTI15_SHIFT    (12)      /* Bits 15-12: EXTI 15 configuration */
-#define AFIO_EXTICR4_EXTI15_MASK     (0x0f << AFIO_EXTICR4_EXTI15_SHIFT)
+#define AFIO_EXTICR4_EXTI15_MASK     (AFIO_EXTICR_PORT_MASK << AFIO_EXTICR4_EXTI15_SHIFT)
 
 /************************************************************************************
  * Public Types
diff --git a/nuttx/arch/arm/src/stm32/stm32_internal.h b/nuttx/arch/arm/src/stm32/stm32_internal.h
index 374c1bd33..2a464c0bf 100755
--- a/nuttx/arch/arm/src/stm32/stm32_internal.h
+++ b/nuttx/arch/arm/src/stm32/stm32_internal.h
@@ -59,7 +59,7 @@
 /* Bit-encoded input to stm32_configgpio() *******************************************/
 
 /* 16-bit Encoding:
- * OFFS S... VPPP BBBB
+ * OFFS SX.. VPPP BBBB
  */
 
 /* Output mode:
@@ -99,6 +99,12 @@
 #  define GPIO_MODE_2MHz              (2 << GPIO_MODE_SHIFT)     /* Output mode, max speed 2 MHz */
 #  define GPIO_MODE_50MHz             (3 << GPIO_MODE_SHIFT)     /* Output mode, max speed 50 MHz */
 
+/* External interrupt selection (GPIO inputs only):
+ * .... .X.. .... ....
+ */
+
+#define GPIO_EXTI                     (1 << 10)                   /* Bit 10: Configure as EXTI interrupt */
+
 /* If the pin is an GPIO digital output, then this identifies the initial output value:
  * .... .... V... ....
  */
diff --git a/nuttx/configs/stm3210e-eval/RIDE/defconfig b/nuttx/configs/stm3210e-eval/RIDE/defconfig
index 6bb7331ad..3f7bfec5a 100755
--- a/nuttx/configs/stm3210e-eval/RIDE/defconfig
+++ b/nuttx/configs/stm3210e-eval/RIDE/defconfig
@@ -60,6 +60,7 @@
 # CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
 # CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader.
 # CONFIG_ARCH_LEDS -  Use LEDs to show state. Unique to board architecture.
+# CONFIG_ARCH_BUTTONS -  Enable support for buttons. Unique to board architecture.
 # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
 #   cause a 100 second delay during boot-up.  This 100 second delay
 #   serves no purpose other than it allows you to calibrate
@@ -83,6 +84,7 @@ CONFIG_ARCH_INTERRUPTSTACK=n
 CONFIG_ARCH_STACKDUMP=y
 CONFIG_ARCH_BOOTLOADER=n
 CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_BUTTONS=n
 CONFIG_ARCH_CALIBRATION=n
 
 #
diff --git a/nuttx/configs/stm3210e-eval/include/board.h b/nuttx/configs/stm3210e-eval/include/board.h
index 9968957c2..c753d0650 100755
--- a/nuttx/configs/stm3210e-eval/include/board.h
+++ b/nuttx/configs/stm3210e-eval/include/board.h
@@ -102,12 +102,51 @@
 #define LED_ASSERTION     6  /* LED1 + LED2 + LED3 */
 #define LED_PANIC         7  /* N/C  + N/C  + N/C + LED4 */
 
+/* The STM3210E-EVAL supports several buttons
+ *
+ * Reset           -- Connected to NRST
+ * Wakeup          -- Connected to PA.0
+ * Tamper          -- Connected to PC.13
+ * Key             -- Connected to PG.8
+ *
+ * And a Joystick
+ *
+ * Joystick center -- Connected to PG.7
+ * Joystick down   -- Connected to PD.3
+ * Joystick left   -- Connected to PG.14
+ * Joystick right  -- Connected to PG.13
+ * Joystick up     -- Connected to PG.15
+ */
+
+#define BUTTON_WAKEUP  (1 << 0)
+#define BUTTON_TAMPER  (1 << 1)
+#define BUTTON_KEY     (1 << 2)
+
+#define JOYSTICK_SEL   (1 << 3)
+#define JOYSTICK_DOWN  (1 << 4)
+#define JOYSTICK_LEFT  (1 << 5)
+#define JOYSTICK_RIGHT (1 << 6)
+#define JOYSTICK_UP    (1 << 7)
+
+#define NUM_BUTTONS     8
+
 /************************************************************************************
- * Public Function Prototypes
+ * Public Data
  ************************************************************************************/
 
 #ifndef __ASSEMBLY__
 
+#undef EXTERN
+#if defined(__cplusplus)
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+/************************************************************************************
+ * Public Function Prototypes
+ ************************************************************************************/
 /************************************************************************************
  * Name: stm32_boardinitialize
  *
@@ -118,7 +157,28 @@
  *
  ************************************************************************************/
 
-extern void stm32_boardinitialize(void);
+EXTERN void stm32_boardinitialize(void);
+
+/************************************************************************************
+ * Button support.
+ *
+ * Description:
+ *   up_buttoninit() must be called to initialize button resources.  After that,
+ *   up_buttons() may be called to collect the state of all buttons.  up_buttons()
+ *   returns an 8-bit bit set with each bit associated with a button.  See the
+ *   BUTTON_* and JOYSTICK_* definitions above for the meaning of each bit.
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_ARCH_BUTTONS
+EXTERN void up_buttoninit(void);
+EXTERN ubyte up_buttons(void);
+#endif
+
+#undef EXTERN
+#if defined(__cplusplus)
+}
+#endif
 
 #endif /* __ASSEMBLY__ */
 #endif  /* __ARCH_BOARD_BOARD_H */
diff --git a/nuttx/configs/stm3210e-eval/nsh/defconfig b/nuttx/configs/stm3210e-eval/nsh/defconfig
index 842f5951a..a3d22defd 100755
--- a/nuttx/configs/stm3210e-eval/nsh/defconfig
+++ b/nuttx/configs/stm3210e-eval/nsh/defconfig
@@ -60,6 +60,7 @@
 # CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
 # CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader.
 # CONFIG_ARCH_LEDS -  Use LEDs to show state. Unique to board architecture.
+# CONFIG_ARCH_BUTTONS -  Enable support for buttons. Unique to board architecture.
 # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
 #   cause a 100 second delay during boot-up.  This 100 second delay
 #   serves no purpose other than it allows you to calibrate
@@ -83,6 +84,7 @@ CONFIG_ARCH_INTERRUPTSTACK=n
 CONFIG_ARCH_STACKDUMP=y
 CONFIG_ARCH_BOOTLOADER=n
 CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_BUTTONS=n
 CONFIG_ARCH_CALIBRATION=n
 
 #
diff --git a/nuttx/configs/stm3210e-eval/ostest/defconfig b/nuttx/configs/stm3210e-eval/ostest/defconfig
index 06b8df95d..1d18778fe 100755
--- a/nuttx/configs/stm3210e-eval/ostest/defconfig
+++ b/nuttx/configs/stm3210e-eval/ostest/defconfig
@@ -60,6 +60,7 @@
 # CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
 # CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader.
 # CONFIG_ARCH_LEDS -  Use LEDs to show state. Unique to board architecture.
+# CONFIG_ARCH_BUTTONS -  Enable support for buttons. Unique to board architecture.
 # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
 #   cause a 100 second delay during boot-up.  This 100 second delay
 #   serves no purpose other than it allows you to calibrate
@@ -83,6 +84,7 @@ CONFIG_ARCH_INTERRUPTSTACK=n
 CONFIG_ARCH_STACKDUMP=y
 CONFIG_ARCH_BOOTLOADER=n
 CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_BUTTONS=n
 CONFIG_ARCH_CALIBRATION=n
 
 #
diff --git a/nuttx/configs/stm3210e-eval/src/Makefile b/nuttx/configs/stm3210e-eval/src/Makefile
index 3e3576ee9..b3e82e7af 100755
--- a/nuttx/configs/stm3210e-eval/src/Makefile
+++ b/nuttx/configs/stm3210e-eval/src/Makefile
@@ -39,8 +39,9 @@ CFLAGS		+= -I$(TOPDIR)/sched
 
 ASRCS		= 
 AOBJS		= $(ASRCS:.S=$(OBJEXT))
-CSRCS		= up_boot.c up_leds.c up_spi.c up_usbdev.c up_extcontext.c \
-		  up_selectnor.c up_deselectnor.c up_selectsram.c up_deselectsram.c
+CSRCS		= up_boot.c up_leds.c up_buttons.c up_spi.c up_usbdev.c \
+		  up_extcontext.c up_selectnor.c up_deselectnor.c \
+		  up_selectsram.c up_deselectsram.c
 ifeq ($(CONFIG_EXAMPLES_NSH_ARCHINIT),y)
 CSRCS		+= up_nsh.c
 endif
diff --git a/nuttx/configs/stm3210e-eval/src/stm3210e-internal.h b/nuttx/configs/stm3210e-eval/src/stm3210e-internal.h
index 897f2a5ca..64101af73 100755
--- a/nuttx/configs/stm3210e-eval/src/stm3210e-internal.h
+++ b/nuttx/configs/stm3210e-eval/src/stm3210e-internal.h
@@ -72,7 +72,26 @@
 #define GPIO_LED3       (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
                          GPIO_OUTPUT_CLEAR|GPIO_PORTF|GPIO_PIN8)
 #define GPIO_LED4       (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
-                         GPIO_OUTPUT_CLEAR|GPIO_PORTF|GPIO_PIN9)
+                         GPIO_OUTPUT_CLEAR|GPIO_PORTF|GPIO_PIN9)
+
+/* BUTTONS -- NOTE that some have EXTI interrupts configured */
+
+#define GPIO_BTN_WAKEUP (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|\
+                         GPIO_PORTA|GPIO_PIN0)
+#define GPIO_BTN_TAMPER (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|\
+                         GPIO_PORTA|GPIO_PIN0)
+#define GPIO_BTN_KEY    (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|\
+                         GPIO_EXTI|GPIO_PORTG|GPIO_PIN8)
+#define GPIO_JOY_KEY    (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|\
+                         GPIO_EXTI|GPIO_PORTG|GPIO_PIN7)
+#define GPIO_JOY_DOWN   (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|\
+                         GPIO_EXTI|GPIO_PORTD|GPIO_PIN3)
+#define GPIO_JOY_LEFT   (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|\
+                         GPIO_EXTI|GPIO_PORTG|GPIO_PIN14)
+#define GPIO_JOY_RIGHT  (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|\
+                         GPIO_EXTI|GPIO_PORTG|GPIO_PIN13)
+#define GPIO_JOY_UP     (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|\
+                         GPIO_EXTI|GPIO_PORTG|GPIO_PIN15)
 
 /* SPI FLASH chip select:  PA.4 */
 
diff --git a/nuttx/configs/stm3210e-eval/src/up_buttons.c b/nuttx/configs/stm3210e-eval/src/up_buttons.c
new file mode 100644
index 000000000..67b8537c7
--- /dev/null
+++ b/nuttx/configs/stm3210e-eval/src/up_buttons.c
@@ -0,0 +1,112 @@
+/****************************************************************************
+ * configs/stm3210e-eval/src/up_leds.c
+ *
+ *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+
+#include <arch/board/board.h>
+#include "stm3210e-internal.h"
+
+#ifdef CONFIG_ARCH_BUTTONS
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+static const uint16 g_buttons[NUM_BUTTONS] =
+{
+  GPIO_BTN_WAKEUP, GPIO_BTN_TAMPER, GPIO_BTN_KEY,   GPIO_JOY_KEY,
+  GPIO_JOY_DOWN,   GPIO_JOY_LEFT,   GPIO_JOY_RIGHT, GPIO_JOY_UP
+};
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_buttoninit
+ ****************************************************************************/
+
+void up_buttoninit(void)
+{
+  int i;
+
+  /* Configure the GPIO pins as inputs.  NOTE that EXTI interrupts are 
+   * configured for some pins but NOT used in this file
+   */
+
+  for (i = 0; i < NUM_BUTTONS; i++)
+    {
+      stm32_configgpio(g_buttons[i]);
+    }
+}
+
+/****************************************************************************
+ * Name: up_buttons
+ ****************************************************************************/
+
+ubyte up_buttons(void)
+{
+  ubyte ret = 0;
+  int i;
+
+  /* Check that state of each key */
+
+  for (i = 0; i < NUM_BUTTONS; i++)
+    {
+       /* A LOW value means that the key is pressed */
+
+       if (!stm32_gpioread(g_buttons[i]))
+         {
+           ret |= (1 << i);
+         }
+    }
+
+  return ret;
+}
+
+#endif /* CONFIG_ARCH_BUTTONS */
diff --git a/nuttx/configs/stm3210e-eval/usbserial/defconfig b/nuttx/configs/stm3210e-eval/usbserial/defconfig
index 1ee43d1cb..0917bc2f1 100755
--- a/nuttx/configs/stm3210e-eval/usbserial/defconfig
+++ b/nuttx/configs/stm3210e-eval/usbserial/defconfig
@@ -60,6 +60,7 @@
 # CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
 # CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader.
 # CONFIG_ARCH_LEDS -  Use LEDs to show state. Unique to board architecture.
+# CONFIG_ARCH_BUTTONS -  Enable support for buttons. Unique to board architecture.
 # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
 #   cause a 100 second delay during boot-up.  This 100 second delay
 #   serves no purpose other than it allows you to calibrate
@@ -83,6 +84,7 @@ CONFIG_ARCH_INTERRUPTSTACK=n
 CONFIG_ARCH_STACKDUMP=y
 CONFIG_ARCH_BOOTLOADER=n
 CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_BUTTONS=n
 CONFIG_ARCH_CALIBRATION=n
 
 #
diff --git a/nuttx/graphics/README.txt b/nuttx/graphics/README.txt
index 44127a53c..1822067ad 100644
--- a/nuttx/graphics/README.txt
+++ b/nuttx/graphics/README.txt
@@ -59,7 +59,7 @@ graphics/nxsu
   single user front-end is selected when CONFIG_NX_MULTIUSER is not defined in the
   NuttX configuration file.
 
-graphics/nxsu
+graphics/nxmu
   This is the NX multi user "front end".  When combined with the generic "back-end"
   (nxbe), it implements a multi-threaded, multi-user windowing system.  The files
   in this directory present the window APIs described in include/nuttx/nx.h.  The