Add infrastructure to support RS-485 on the LPC43xx (logic still incomplete)
git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@4958 7fd9a85b-ad96-42d3-883c-3090e2eb8679
This commit is contained in:
patacongo
parent
263da58bac
commit
528290eda3
|
|
@ -3029,4 +3029,9 @@
|
|||
add the ability to run the chip off the internal oscillator. There is no open
|
||||
board configuration for this part yet (the STM32VLDiscovery would be a candidate).
|
||||
Contributed by Mike Smith.
|
||||
* arch/arm/src/stm32: Fixed typos in conditional compilation in the CAN and DMA
|
||||
and some pin configuration. This would have caused problems for STM32 F107xx.
|
||||
Typos noted by Mike Smith.
|
||||
* arch/arm/src/lpc43xx/lpc43_serial.c: Add support for certain RS-485 features
|
||||
in the serial driver (still a work in progress on initial check-in).
|
||||
|
||||
|
|
|
|||
|
|
@ -857,6 +857,50 @@ static int up_interrupt(int irq, void *context)
|
|||
return OK;
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_set_rs485_mode
|
||||
*
|
||||
* Description:
|
||||
* Handle LPC43xx USART0,2,3 RS485 mode set ioctl (TIOCSRS485) to enable
|
||||
* and disable RS-485 mode. This is part of the serial ioctl logic.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_USART_RS485MODE
|
||||
static inline int up_set_rs485_mode(struct up_dev_s *priv,
|
||||
const struct serial_rs485 *mode)
|
||||
{
|
||||
irqstate_t flags;
|
||||
|
||||
DEBUGASSERT(priv && mode);
|
||||
flags = irqsave();
|
||||
#warning "Missing logic"
|
||||
irqrestore(flags);
|
||||
}
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_get_rs485_mode
|
||||
*
|
||||
* Description:
|
||||
* Handle LPC43xx USART0,2,3 RS485 mode get ioctl (TIOCGRS485) to get the
|
||||
* current RS-485 mode.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_USART_RS485MODE
|
||||
static inline int up_get_rs485_mode(struct up_dev_s *priv,
|
||||
struct serial_rs485 *mode)
|
||||
{
|
||||
irqstate_t flags;
|
||||
|
||||
DEBUGASSERT(priv && mode);
|
||||
flags = irqsave();
|
||||
#warning "Missing logic"
|
||||
irqrestore(flags);
|
||||
}
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_ioctl
|
||||
*
|
||||
|
|
@ -906,6 +950,22 @@ static int up_ioctl(struct file *filep, int cmd, unsigned long arg)
|
|||
}
|
||||
break;
|
||||
|
||||
#ifdef CONFIG_USART_RS485MODE
|
||||
case TIOCSRS485: /* Set RS485 mode, arg: pointer to struct serial_rs485 */
|
||||
{
|
||||
ret = up_set_rs485_mode(priv,
|
||||
(const struct serial_rs485 *)((uintptr_t)arg));
|
||||
}
|
||||
break;
|
||||
|
||||
case TIOCGRS485: /* Get RS485 mode, arg: pointer to struct serial_rs485 */
|
||||
{
|
||||
ret = up_get_rs485_mode(priv,
|
||||
(struct serial_rs485 *)((uintptr_t)arg));
|
||||
}
|
||||
break;
|
||||
#endif
|
||||
|
||||
default:
|
||||
*get_errno_ptr() = ENOTTY;
|
||||
ret = ERROR;
|
||||
|
|
|
|||
|
|
@ -716,7 +716,7 @@ LPC4330-Xplorer Configuration Options
|
|||
CONFIG_LPC43_USB1_ULPI=y
|
||||
CONFIG_LPC43_WWDT=y
|
||||
|
||||
LPC43xx specific device driver settings
|
||||
LPC43xx specific U[S]ART device driver settings
|
||||
|
||||
CONFIG_U[S]ARTn_SERIAL_CONSOLE - selects the UARTn for the
|
||||
console and ttys0 (default is the USART0).
|
||||
|
|
@ -729,6 +729,10 @@ LPC4330-Xplorer Configuration Options
|
|||
CONFIG_U[S]ARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
|
||||
CONFIG_U[S]ARTn_2STOP - Two stop bits
|
||||
|
||||
CONFIG_USART_RS485MODE - Support LPC43xx USART0,2,3 RS485 mode
|
||||
ioctls (TIOCSRS485 and TIOCGRS485) to enable and disable
|
||||
RS-485 mode.
|
||||
|
||||
LPC43xx specific CAN device driver settings. These settings all
|
||||
require CONFIG_CAN:
|
||||
|
||||
|
|
|
|||
|
|
@ -227,6 +227,13 @@ CONFIG_UART1_2STOP=0
|
|||
CONFIG_USART2_2STOP=0
|
||||
CONFIG_USART3_2STOP=0
|
||||
|
||||
#
|
||||
# CONFIG_USART_RS485MODE - Support LPC43xx USART0,2,3 RS485 mode
|
||||
# ioctls (TIOCSRS485 and TIOCGRS485) to enable and disable
|
||||
# RS-485 mode.
|
||||
#
|
||||
CONFIG_USART_RS485MODE=n
|
||||
|
||||
#
|
||||
# LPC43xx specific PHY/Ethernet device driver settings
|
||||
#
|
||||
|
|
|
|||
|
|
@ -227,6 +227,13 @@ CONFIG_UART1_2STOP=0
|
|||
CONFIG_USART2_2STOP=0
|
||||
CONFIG_USART3_2STOP=0
|
||||
|
||||
#
|
||||
# CONFIG_USART_RS485MODE - Support LPC43xx USART0,2,3 RS485 mode
|
||||
# ioctls (TIOCSRS485 and TIOCGRS485) to enable and disable
|
||||
# RS-485 mode.
|
||||
#
|
||||
CONFIG_USART_RS485MODE=n
|
||||
|
||||
#
|
||||
# LPC43xx specific PHY/Ethernet device driver settings
|
||||
#
|
||||
|
|
|
|||
|
|
@ -160,9 +160,21 @@
|
|||
#define TIOCMIWAIT _TIOC(0x0028) /* Wait for a change on serial input line(s): void */
|
||||
#define TIOCGICOUNT _TIOC(0x0029) /* Read serial port interrupt count: FAR struct serial_icounter_struct */
|
||||
|
||||
/* RS-485 Support */
|
||||
|
||||
#define TIOCSRS485 _TIOC(0x002a) /* Set RS485 mode, arg: pointer to struct serial_rs485 */
|
||||
#define TIOCGRS485 _TIOC(0x002b) /* Get RS485 mode, arg: pointer to struct serial_rs485 */
|
||||
|
||||
/* Debugging */
|
||||
|
||||
#define TIOCSERGSTRUCT _TIOC(0x002a) /* Get device TTY structure */
|
||||
#define TIOCSERGSTRUCT _TIOC(0x002c) /* Get device TTY structure */
|
||||
|
||||
/* Definitions used in struct serial_rs485 (Linux compatible) */
|
||||
|
||||
#define SER_RS485_ENABLED (1 << 0) /* Enable/disble RS-485 support */
|
||||
#define SER_RS485_RTS_ON_SEND (1 << 1) /* Logic level for RTS pin when sending */
|
||||
#define SER_RS485_RTS_AFTER_SEND (1 << 2) /* Logic level for RTS pin after sent */
|
||||
#define SER_RS485_RX_DURING_TX (1 << 4)
|
||||
|
||||
/********************************************************************************************
|
||||
* Public Type Definitions
|
||||
|
|
@ -178,6 +190,15 @@ struct winsize
|
|||
/* uint16_t ws_ypixel; unused */
|
||||
};
|
||||
|
||||
/* Structure used with TIOCSRS485 and TIOCGRS485 (Linux compatible) */
|
||||
|
||||
struct serial_rs485
|
||||
{
|
||||
uint32_t flags /* See SER_RS485_* definitions */
|
||||
uint32_t delay_rts_before_send; /* Delay before send (milliseconds) */
|
||||
uint32_t delay_rts_after_send; /* Delay after send (milliseconds) */
|
||||
};
|
||||
|
||||
/********************************************************************************************
|
||||
* Public Function Prototypes
|
||||
********************************************************************************************/
|
||||
|
|
|
|||
Loading…
Reference in New Issue