phone-side
/
nuttx-bb
9
0
Fork 0
Code Releases Activity

Rename all use of up_boardinitialize(). Should not use common microprocessing naming convention but rather the microprocessor-specific naming conventioni

This commit is contained in:
Gregory Nutt 2015-02-28 07:14:37 -06:00
parent 87994b5856
commit 3c73217003
17 changed files with 98 additions and 98 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

31
nuttx/arch/avr/src/at32uc3/at32uc3_internal.h
View File

@ -1,7 +1,7 @@
/****************************************************************************
* arch/avr/src/at32uc3/at32uc3_internal.h
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Copyright (C) 2010, 2015 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -165,7 +165,8 @@
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C" {
extern "C"
{
#else
#define EXTERN extern
#endif
@ -182,7 +183,7 @@ extern "C" {
*
****************************************************************************/
EXTERN void up_clkinitialize(void);
void up_clkinitialize(void);
/****************************************************************************
* Name: usart_reset
@ -192,7 +193,7 @@ EXTERN void up_clkinitialize(void);
*
****************************************************************************/
EXTERN void usart_reset(uintptr_t usart_base);
void usart_reset(uintptr_t usart_base);
/****************************************************************************
* Name: usart_configure
@ -215,18 +216,18 @@ void usart_configure(uintptr_t usart_base, uint32_t baud, unsigned int parity,
*
****************************************************************************/
EXTERN void up_consoleinit(void);
void up_consoleinit(void);
/****************************************************************************
* Name: up_boardinit
* Name: at32uc3_boardinitialize
*
* Description:
* This function must be provided by the board-specific logic in the
* directory configs/<board-name>/up_boot.c.
* directory configs/<board-name>/src.
*
****************************************************************************/
EXTERN void up_boardinitialize(void);
void at32uc3_boardinitialize(void);
/****************************************************************************
* Name: at32uc3_configgpio
@ -236,7 +237,7 @@ EXTERN void up_boardinitialize(void);
*
****************************************************************************/
EXTERN int at32uc3_configgpio(uint16_t cfgset);
int at32uc3_configgpio(uint16_t cfgset);
/****************************************************************************
* Name: at32uc3_gpiowrite
@ -246,7 +247,7 @@ EXTERN int at32uc3_configgpio(uint16_t cfgset);
*
****************************************************************************/
EXTERN void at32uc3_gpiowrite(uint16_t pinset, bool value);
void at32uc3_gpiowrite(uint16_t pinset, bool value);
/****************************************************************************
* Name: at32uc3_gpioread
@ -256,7 +257,7 @@ EXTERN void at32uc3_gpiowrite(uint16_t pinset, bool value);
*
****************************************************************************/
EXTERN bool at32uc3_gpioread(uint16_t pinset);
bool at32uc3_gpioread(uint16_t pinset);
/****************************************************************************
* Name: gpio_irqinitialize
@ -277,7 +278,7 @@ EXTERN bool at32uc3_gpioread(uint16_t pinset);
****************************************************************************/
#ifdef CONFIG_AVR32_GPIOIRQ
EXTERN void weak_function gpio_irqinitialize(void);
void weak_function gpio_irqinitialize(void);
#endif
/****************************************************************************
@ -295,7 +296,7 @@ EXTERN void weak_function gpio_irqinitialize(void);
****************************************************************************/
#ifdef CONFIG_AVR32_GPIOIRQ
EXTERN int gpio_irqattach(int irq, xcpt_t newisr, xcpt_t *oldisr);
int gpio_irqattach(int irq, xcpt_t newisr, xcpt_t *oldisr);
#endif
/****************************************************************************
@ -313,7 +314,7 @@ EXTERN int gpio_irqattach(int irq, xcpt_t newisr, xcpt_t *oldisr);
****************************************************************************/
#ifdef CONFIG_AVR32_GPIOIRQ
EXTERN void gpio_irqenable(int irq);
void gpio_irqenable(int irq);
#endif
/*****************************************************************************
@ -331,7 +332,7 @@ EXTERN void gpio_irqenable(int irq);
****************************************************************************/
#ifdef CONFIG_AVR32_GPIOIRQ
EXTERN void gpio_irqdisable(int irq);
void gpio_irqdisable(int irq);
#endif
#undef EXTERN

2
nuttx/arch/avr/src/at32uc3/at32uc3_lowinit.c
View File

@ -101,7 +101,7 @@ void up_lowinit(void)
/* Perform board-level initialization */
up_boardinitialize();
at32uc3_boardinitialize();
}

33
nuttx/arch/avr/src/at90usb/at90usb_internal.h
View File

@ -1,7 +1,7 @@
/****************************************************************************
* arch/avr/src/at90usb/at90usb_internal.h
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Copyright (C) 2011, 2015 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -71,7 +71,8 @@
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C" {
extern "C"
{
#else
#define EXTERN extern
#endif
@ -84,11 +85,11 @@ extern "C" {
* Name: up_clkinit
*
* Description:
* Initialiaze clock/PLL settings per the definitions in the board.h file.
* Initialize clock/PLL settings per the definitions in the board.h file.
*
****************************************************************************/
EXTERN void up_clkinitialize(void);
void up_clkinitialize(void);
/****************************************************************************
* Name: usart1_reset
@ -98,7 +99,7 @@ EXTERN void up_clkinitialize(void);
*
****************************************************************************/
EXTERN void usart1_reset(void);
void usart1_reset(void);
/****************************************************************************
* Name: usart1_configure
@ -108,30 +109,30 @@ EXTERN void usart1_reset(void);
*
****************************************************************************/
EXTERN void usart1_configure(void);
void usart1_configure(void);
/****************************************************************************
* Name: up_consoleinit
*
* Description:
* Initialize a console for debug output. This function is called very
* early in the initializeation sequence to configure the serial console
* uart (only).
* early in the initialization sequence to configure the serial console
* UART (only).
*
****************************************************************************/
EXTERN void up_consoleinit(void);
void up_consoleinit(void);
/****************************************************************************
* Name: up_boardinit
* Name: at90usb_boardinitialize
*
* Description:
* This function must be provided by the board-specific logic in the
* directory configs/<board-name>/up_boot.c.
* directory configs/<board-name>/src/.
*
****************************************************************************/
EXTERN void up_boardinitialize(void);
void at90usb_boardinitialize(void);
/****************************************************************************
* Name: gpio_irqinitialize
@ -150,7 +151,7 @@ EXTERN void up_boardinitialize(void);
****************************************************************************/
#ifdef CONFIG_AVR_GPIOIRQ
EXTERN void weak_function gpio_irqinitialize(void);
void weak_function gpio_irqinitialize(void);
#endif
/****************************************************************************
@ -166,7 +167,7 @@ EXTERN void weak_function gpio_irqinitialize(void);
****************************************************************************/
#ifdef CONFIG_AVR_GPIOIRQ
EXTERN int gpio_irqattach(int irq, xcpt_t newisr, xcpt_t *oldisr);
int gpio_irqattach(int irq, xcpt_t newisr, xcpt_t *oldisr);
#endif
/****************************************************************************
@ -182,7 +183,7 @@ EXTERN int gpio_irqattach(int irq, xcpt_t newisr, xcpt_t *oldisr);
****************************************************************************/
#ifdef CONFIG_AVR_GPIOIRQ
EXTERN void gpio_irqenable(int irq);
void gpio_irqenable(int irq);
#endif
/*****************************************************************************
@ -198,7 +199,7 @@ EXTERN void gpio_irqenable(int irq);
****************************************************************************/
#ifdef CONFIG_AVR_GPIOIRQ
EXTERN void gpio_irqdisable(int irq);
void gpio_irqdisable(int irq);
#endif
#undef EXTERN

6
nuttx/arch/avr/src/at90usb/at90usb_lowinit.c
View File

@ -1,7 +1,7 @@
/**************************************************************************
* arch/avr/src/at90usb/at90usb_lowinit.c
*
* Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2011-2012, 2015 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -148,7 +148,5 @@ void up_lowinit(void)
/* Perform board-level initialization */
up_boardinitialize();
at90usb_boardinitialize();
}

29
nuttx/arch/avr/src/atmega/atmega_internal.h
View File

@ -71,7 +71,8 @@
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C" {
extern "C"
{
#else
#define EXTERN extern
#endif
@ -88,7 +89,7 @@ extern "C" {
*
****************************************************************************/
EXTERN void up_clkinitialize(void);
void up_clkinitialize(void);
/****************************************************************************
* Name: usart0_reset and usart1_reset
@ -98,8 +99,8 @@ EXTERN void up_clkinitialize(void);
*
****************************************************************************/
EXTERN void usart0_reset(void);
EXTERN void usart1_reset(void);
void usart0_reset(void);
void usart1_reset(void);
/****************************************************************************
* Name: usart0_configure and usart1_configure
@ -109,8 +110,8 @@ EXTERN void usart1_reset(void);
*
****************************************************************************/
EXTERN void usart0_configure(void);
EXTERN void usart1_configure(void);
void usart0_configure(void);
void usart1_configure(void);
/****************************************************************************
* Name: up_consoleinit
@ -122,18 +123,18 @@ EXTERN void usart1_configure(void);
*
****************************************************************************/
EXTERN void up_consoleinit(void);
void up_consoleinit(void);
/****************************************************************************
* Name: up_boardinit
* Name: atmega_boardinitialize
*
* Description:
* This function must be provided by the board-specific logic in the
* directory configs/<board-name>/up_boot.c.
* directory configs/<board-name>/src.
*
****************************************************************************/
EXTERN void up_boardinitialize(void);
void atmega_boardinitialize(void);
/****************************************************************************
* Name: gpio_irqinitialize
@ -152,7 +153,7 @@ EXTERN void up_boardinitialize(void);
****************************************************************************/
#ifdef CONFIG_AVR_GPIOIRQ
EXTERN void weak_function gpio_irqinitialize(void);
void weak_function gpio_irqinitialize(void);
#endif
/****************************************************************************
@ -168,7 +169,7 @@ EXTERN void weak_function gpio_irqinitialize(void);
****************************************************************************/
#ifdef CONFIG_AVR_GPIOIRQ
EXTERN int gpio_irqattach(int irq, xcpt_t newisr, xcpt_t *oldisr);
int gpio_irqattach(int irq, xcpt_t newisr, xcpt_t *oldisr);
#endif
/****************************************************************************
@ -184,7 +185,7 @@ EXTERN int gpio_irqattach(int irq, xcpt_t newisr, xcpt_t *oldisr);
****************************************************************************/
#ifdef CONFIG_AVR_GPIOIRQ
EXTERN void gpio_irqenable(int irq);
void gpio_irqenable(int irq);
#endif
/*****************************************************************************
@ -200,7 +201,7 @@ EXTERN void gpio_irqenable(int irq);
****************************************************************************/
#ifdef CONFIG_AVR_GPIOIRQ
EXTERN void gpio_irqdisable(int irq);
void gpio_irqdisable(int irq);
#endif
#undef EXTERN

4
nuttx/arch/avr/src/atmega/atmega_lowinit.c
View File

@ -1,7 +1,7 @@
/**************************************************************************
* arch/avr/src/atmega/atmega_lowinit.c
*
* Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2011-2012, 2015 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -153,7 +153,7 @@ void up_lowinit(void)
/* Perform board-level initialization */
up_boardinitialize();
atmega_boardinitialize();
}

2
nuttx/arch/avr/src/avr/avr_internal.h
View File

@ -146,7 +146,7 @@ uint8_t *up_doirq(uint8_t irq, uint8_t *regs);
* including up_spiinitialize()) are provided by common LPC17xx logic. To use
* this common SPI logic on your board:
*
* 1. Provide logic in up_boardinitialize() to configure SPI chip select
* 1. Provide logic in <arch>_boardinitialize() to configure SPI chip select
* pins.
* 2. Provide avr_spiselect() and avr_spistatus() functions in your board-specific
* logic. These functions will perform chip selection and status operations

10
nuttx/arch/avr/src/avr32/avr32_internal.h
View File

@ -88,7 +88,7 @@ extern uint32_t g_idle_topstack;
****************************************************************************/
/****************************************************************************
* Public Functions
* Public Function Prototypes
****************************************************************************/
#ifndef __ASSEMBLY__
@ -102,7 +102,7 @@ extern uint32_t g_idle_topstack;
*
************************************************************************************/
extern void up_copystate(uint32_t *dest, uint32_t *src);
void up_copystate(uint32_t *dest, uint32_t *src);
/************************************************************************************
* Name: up_fullcontextrestore
@ -112,7 +112,7 @@ extern void up_copystate(uint32_t *dest, uint32_t *src);
*
************************************************************************************/
extern void up_fullcontextrestore(uint32_t *restoreregs) noreturn_function;
void up_fullcontextrestore(uint32_t *restoreregs) noreturn_function;
/************************************************************************************
* Name: up_switchcontext
@ -122,7 +122,7 @@ extern void up_fullcontextrestore(uint32_t *restoreregs) noreturn_function;
*
************************************************************************************/
extern void up_switchcontext(uint32_t *saveregs, uint32_t *restoreregs);
void up_switchcontext(uint32_t *saveregs, uint32_t *restoreregs);
/************************************************************************************
* Name: up_doirq
@ -132,7 +132,7 @@ extern void up_switchcontext(uint32_t *saveregs, uint32_t *restoreregs);
*
************************************************************************************/
extern uint32_t *up_doirq(int irq, uint32_t *regs);
uint32_t *up_doirq(int irq, uint32_t *regs);
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_AVR_SRC_AVR32_AVR32_INTERNAL_H */

11
nuttx/arch/x86/src/common/up_internal.h
View File

@ -179,6 +179,17 @@ extern uint32_t _ebss; /* End+1 of .bss */
#ifndef __ASSEMBLY__
/****************************************************************************
* Name: x86_boardinitialize
*
* Description:
* This function must be provided by the board-specific logic in the
* directory configs/<board-name>/src/.
*
****************************************************************************/
void x86_boardinitialize(void);
/* Defined in files with the same name as the function */
extern void up_boot(void);

4
nuttx/arch/x86/src/qemu/qemu_lowsetup.c
View File

@ -1,7 +1,7 @@
/****************************************************************************
* arch/x86/src/qemu/qemu_lowsetup.c
*
* Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2011-2012, 2015 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -135,6 +135,6 @@ void up_lowsetup(void)
/* Now perform board-specific initializations */
up_boardinitialize();
x86_boardinitialize();
}

10
nuttx/configs/amber/src/up_boot.c
View File

@ -1,7 +1,7 @@
/************************************************************************************
* configs/amber/src/up_boot.c
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Copyright (C) 2011, 2015 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -50,7 +50,7 @@
#include "amber_internal.h"
/************************************************************************************
* Definitions
* Pre-processor Definitions
************************************************************************************/
/************************************************************************************
@ -62,16 +62,16 @@
************************************************************************************/
/************************************************************************************
* Name: up_boardinitialize
* Name: atmega_boardinitialize
*
* Description:
* All ATMega architectures must provide the following entry point. This entry
* point is called early in the intitialization -- after all memory has been
* point is called early in the initialization -- after all memory has been
* configured and mapped but before any devices have been initialized.
*
************************************************************************************/
void up_boardinitialize(void)
void atmega_boardinitialize(void)
{
/* Configure SSP chip selects if 1) at least one SSP is enabled, and 2) the weak
* function atmega_spiinitialize() has been brought into the link.

10
nuttx/configs/avr32dev1/src/up_boot.c
View File

@ -63,16 +63,16 @@
************************************************************************************/
/************************************************************************************
* Name: up_boardinitialize
* Name: at32uc3_boardinitialize
*
* Description:
* All AVR32 architectures must provide the following entry point. This entry point
* is called early in the intitialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
* All AVR32 AT32UC3 architectures must provide the following entry point. This
* entry point is called early in the initialization -- after all memory has been
* configured and mapped but before any devices have been initialized.
*
************************************************************************************/
void up_boardinitialize(void)
void at32uc3_boardinitialize(void)
{
/* Configure SPI chip selects */

11
nuttx/configs/micropendous3/src/up_boot.c
View File

@ -1,8 +1,7 @@
/************************************************************************************
* configs/micropendous3/src/up_boot.c
* arch/mips/src/board/up_boot.c
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Copyright (C) 2011, 2015 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -51,7 +50,7 @@
#include "micropendous3_internal.h"
/************************************************************************************
* Definitions
* Pre-processor Definitions
************************************************************************************/
/************************************************************************************
@ -63,16 +62,16 @@
************************************************************************************/
/************************************************************************************
* Name: up_boardinitialize
* Name: at90usb_boardinitialize
*
* Description:
* All AT90USB architectures must provide the following entry point. This entry
* point is called early in the intitialization -- after all memory has been
* point is called early in the initialization -- after all memory has been
* configured and mapped but before any devices have been initialized.
*
************************************************************************************/
void up_boardinitialize(void)
void at90usb_boardinitialize(void)
{
/* Configure SSP chip selects if 1) at least one SSP is enabled, and 2) the weak
* function at90usb_spiinitialize() has been brought into the link.

4
nuttx/configs/moteino-mega/src/avr_boot.c
View File

@ -62,7 +62,7 @@
************************************************************************************/
/************************************************************************************
* Name: up_boardinitialize
* Name: atmega_boardinitialize
*
* Description:
* All ATMega architectures must provide the following entry point. This entry
@ -71,7 +71,7 @@
*
************************************************************************************/
void up_boardinitialize(void)
void atmega_boardinitialize(void)
{
/* Configure SSP chip selects if 1) at least one SSP is enabled, and 2) the weak
* function atmega_spiinitialize() has been brought into the link.

14
nuttx/configs/qemu-i486/include/board.h
View File

@ -72,7 +72,8 @@
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C" {
extern "C"
{
#else
#define EXTERN extern
#endif
@ -80,17 +81,6 @@ extern "C" {
/************************************************************************************
* Public Function Prototypes
************************************************************************************/
/************************************************************************************
* Name: up_boardinitialize
*
* Description:
* All x86 architectures must provide the following entry point. This entry point
* is called early in the intitialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
EXTERN void up_boardinitialize(void);
#undef EXTERN
#if defined(__cplusplus)

6
nuttx/configs/qemu-i486/src/qemu_boot.c
View File

@ -63,16 +63,16 @@
************************************************************************************/
/************************************************************************************
* Name: up_boardinitialize
* Name: x86_boardinitialize
*
* Description:
* All x86 architectures must provide the following entry point. This entry point
* is called early in the intitialization -- after all memory has been configured
* is called early in the initialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
void up_boardinitialize(void)
void x86_boardinitialize(void)
{
/* Configure on-board LEDs if LED support has been selected. */

9
nuttx/configs/teensy/src/up_boot.c
View File

@ -1,8 +1,7 @@
/************************************************************************************
* configs/teensy/src/up_boot.c
* arch/mips/src/board/up_boot.c
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Copyright (C) 2011, 2015 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -63,16 +62,16 @@
************************************************************************************/
/************************************************************************************
* Name: up_boardinitialize
* Name: at90usb_boardinitialize
*
* Description:
* All AT90USB architectures must provide the following entry point. This entry
* point is called early in the intitialization -- after all memory has been
* point is called early in the initialization -- after all memory has been
* configured and mapped but before any devices have been initialized.
*
************************************************************************************/
void up_boardinitialize(void)
void at90usb_boardinitialize(void)
{
/* Configure SSP chip selects if 1) at least one SSP is enabled, and 2) the weak
* function at90usb_spiinitialize() has been brought into the link.