phone-side
/
nuttx-bb
9
0
Fork 0
Code Releases Activity

Add M25Px as paging source 

git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@2937 7fd9a85b-ad96-42d3-883c-3090e2eb8679
This commit is contained in:
patacongo 2010-09-11 01:58:26 +00:00
parent e3bc212c54
commit 2794f1b7f8
11 changed files with 235 additions and 22 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
nuttx/Documentation/NuttxPortingGuide.html
View File

@ -12,7 +12,7 @@
<h1><big><font color="#3c34ec">
<i>NuttX RTOS Porting Guide</i>
</font></big></h1>
<p>Last Updated: September 8, 2010</p>
<p>Last Updated: September 10, 2010</p>
</td>
</tr>
</table>
@ -2593,6 +2593,21 @@ build
This should be defined to be zero for the typical device that has only a single slot (See <code>CONFIG_MMCSD_NSLOTS</code>).
If defined, <code>CONFIG_PAGING_SDSLOT</code> will instruct certain board-specific logic to initialize the media in this SD slot.
</li>
<li>
<code>CONFIG_PAGING_M25PX</code>:
Use the m25px.c FLASH driver.
If this is selected, then the MTD interface to the MP25x device will be used to support paging.
</li>
<li>
<code>CONFIG_PAGING_M25PX_BINOFFSET</code>:
If CONFIG_PAGING_M25PX is defined then CONFIG_PAGING_M25PX_BINOFFSET will be used to specify the offset in bytes into the FLASH device where the NuttX binary image is located.
Default: 0
</li>
<li>
<code>CONFIG_PAGING_M25PX_SPIPORT</code>:
If CONFIG_PAGING_M25PX is defined and the device has multiple SPI busses (ports), then this configuration should be set to indicate which SPI port the M25Px device is connected.
Default: 0
</li>
</ul>
<p>
The following can be used to disable categories of APIs supported

11
nuttx/configs/README.txt
View File

@ -420,6 +420,17 @@ defconfig -- This is a configuration file similar to the Linux
only a single slot (See CONFIG_MMCSD_NSLOTS). If defined,
CONFIG_PAGING_SDSLOT will instruct certain board-specific logic to
initialize the media in this SD slot.
CONFIG_PAGING_M25PX - Use the m25px.c FLASH driver. If this is selected,
then the MTD interface to the MP25x device will be used to support
paging.
CONFIG_PAGING_M25PX_BINOFFSET - If CONFIG_PAGING_M25PX is defined then
CONFIG_PAGING_M25PX_BINOFFSET will be used to specify the offset
in bytes into the FLASH device where the NuttX binary image is located.
Default: 0
CONFIG_PAGING_M25PX_SPIPORT - If CONFIG_PAGING_M25PX is defined and
the device has multiple SPI busses (ports), then this configuration
should be set to indicate which SPI port the M25Px device is connected.
Default: 0
The following can be used to disable categories of APIs supported
by the OS. If the compiler supports weak functions, then it

2
nuttx/configs/ea3131/include/board.h
View File

@ -2,7 +2,7 @@
* configs/ea3131/include/board.h
* include/arch/board/board.h
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without

16
nuttx/configs/ea3131/pgnsh/defconfig
View File

@ -117,7 +117,7 @@ CONFIG_LPC313X_BUILDROOT=y
# Individual subsystems can be enabled:
#
CONFIG_LPC313X_MCI=n
CONFIG_LPC313X_SPI=n
CONFIG_LPC313X_SPI=y
CONFIG_LPC313X_UART=y
#
@ -424,6 +424,17 @@ CONFIG_SIG_SIGWORK=4
# only a single slot (See CONFIG_MMCSD_NSLOTS). If defined,
# CONFIG_PAGING_SDSLOT will instruct certain board-specific logic to
# initialize the media in this SD slot.
# CONFIG_PAGING_M25PX - Use the m25px.c FLASH driver. If this is selected,
# then the MTD interface to the MP25x device will be used to support
# paging.
# CONFIG_PAGING_M25PX_BINOFFSET - If CONFIG_PAGING_M25PX is defined then
# CONFIG_PAGING_M25PX_BINOFFSET will be used to specify the offset
# in bytes into the FLASH device where the NuttX binary image is located.
# Default: 0
# CONFIG_PAGING_M25PX_SPIPORT - If CONFIG_PAGING_M25PX is defined and
# the device has multiple SPI busses (ports), then this configuration
# should be set to indicate which SPI port the M25Px device is connected.
# Default: 0
#
CONFIG_PAGING=y
CONFIG_PAGING_PAGESIZE=1024
@ -445,6 +456,9 @@ CONFIG_PAGING_BLOCKINGFILL=y
CONFIG_PAGING_MOUNTPT="/mnt/pgsrc"
CONFIG_PAGING_MINOR=0
CONFIG_PAGING_SDSLOT=0
CONFIG_PAGING_M25PX=y
CONFIG_PAGING_M25PX_BINOFFSET=0
CONFIG_PAGING_M25PX_SPIPORT=0
#
# The following can be used to disable categories of

14
nuttx/configs/ea3131/src/Makefile
View File

@ -40,7 +40,19 @@ CFLAGS += -I$(TOPDIR)/sched
ASRCS =
AOBJS = $(ASRCS:.S=$(OBJEXT))
CSRCS = up_boot.c up_buttons.c up_clkinit.c up_leds.c up_mem.c up_spi.c
CSRCS = up_boot.c up_clkinit.c
ifeq ($(CONFIG_ARCH_BUTTONS),y)
CSRCS += up_buttons.c
endif
ifeq ($(CONFIG_LPC313X_EXTSDRAM),y)
CSRCS += up_mem.c
endif
ifeq ($(CONFIG_ARCH_LEDS),y)
CSRCS += up_leds.c
endif
ifeq ($(CONFIG_LPC313X_SPI),y)
CSRCS += up_spi.c
endif
ifeq ($(CONFIG_EXAMPLES_NSH_ARCHINIT),y)
CSRCS += up_nsh.c
endif

2
nuttx/configs/ea3131/src/up_buttons.c
View File

@ -1,7 +1,7 @@
/****************************************************************************
* configs/ea3131/src/up_leds.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without

2
nuttx/configs/ea3131/src/up_clkinit.c
View File

@ -2,7 +2,7 @@
* configs/ea3131/src/up_clkinit.c
* arch/arm/src/board/up_clkinit.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* References:

187
nuttx/configs/ea3131/src/up_fillpage.c
View File

@ -62,6 +62,13 @@
# endif
#endif
#ifdef CONFIG_PAGING_M25PX
# include <sys/ioctl.h>
# include <nuttx/ioctl.h>
# include <nuttx/spi.h>
# include <nuttx/mtd.h>
#endif
/****************************************************************************
* Definitions
****************************************************************************/
@ -71,7 +78,8 @@
/* SD SLOT number might depend on the board configuration */
#ifdef CONFIG_ARCH_BOARD_EA3131
# define HAVE_SD 1
# define HAVE_SD 1
# define HAVE_SPINOR 1
# if defined(CONFIG_PAGING_SDSLOT) && CONFIG_PAGING_SDSLOT != 0
# error "Only one SD slot"
# undef CONFIG_PAGING_SDSLOT
@ -81,6 +89,14 @@
# error "Unrecognized LPC313X board"
# undef CONFIG_PAGING_SDSLOT
# undef HAVE_SD
# undef HAVE_SPINOR
#endif
/* Sanity check: We can only perform paging using a single source device */
#if defined(CONFIG_PAGING_BINPATH) && defined(CONFIG_PAGING_M25PX)
# error "Both CONFIG_PAGING_BINPATH and CONFIG_PAGING_M25PX are defined"
# undef CONFIG_PAGING_BINPATH
#endif
/* Are we accessing the page source data through a file path? */
@ -122,10 +138,37 @@
#endif /* CONFIG_PAGING_BINPATH */
/* Are we accessing the page source data through the M25P* MTD device? */
#ifdef CONFIG_PAGING_M25PX
/* Verify that SPI support is enabld */
#ifndef CONFIG_LPC313X_SPI
# error "SPI support is not enabled"
#endif
/* Make sure that some value is defined for the offset into the FLASH
* of the NuttX binary image.
*/
# ifndef CONFIG_PAGING_M25PX_BINOFFSET
# define CONFIG_PAGING_M25PX_BINOFFSET 0
# endif
/* Make sure that some value is defined for the SPI port number */
# ifndef CONFIG_PAGING_M25PX_SPIPORT
# define CONFIG_PAGING_M25PX_SPIPORT 0
# endif
#endif
/****************************************************************************
* Private Types
****************************************************************************/
/* State structure needed to support paging from a file */
#ifdef CONFIG_PAGING_BINPATH
struct pg_source_s
{
@ -134,11 +177,34 @@ struct pg_source_s
};
#endif
/* State structured needd to support paging through the M25P* MTD interface. */
#ifdef CONFIG_PAGING_M25PX
struct pg_source_s
{
/* If interrupts or DMA are used, then we will have to defer initialization */
#if defined(CONFIG_LPC313x_SPI_INTERRUPTS) || defined(CONFIG_LPC313x_SPI_DMA)
bool initialized; /* TRUE: we are initialized */
#endif
/* This is the MP25P* device state structure */
FAR struct mtd_dev_s *mtd;
/* This the the device geometry */
#ifdef CONFIG_DEBUG
FAR struct mtd_geometry_s geo;
#endif
};
#endif
/****************************************************************************
* Private Data
****************************************************************************/
#ifdef CONFIG_PAGING_BINPATH
#if defined(CONFIG_PAGING_BINPATH) || defined(CONFIG_PAGING_M25PX)
static struct pg_source_s g_pgsrc;
#endif
@ -157,7 +223,7 @@ static struct pg_source_s g_pgsrc;
*
****************************************************************************/
#ifdef CONFIG_PAGING_BINPATH
#if defined(CONFIG_PAGING_BINPATH)
static inline void lpc313x_initsrc(void)
{
#ifdef CONFIG_PAGING_SDSLOT
@ -211,9 +277,56 @@ static inline void lpc313x_initsrc(void)
}
}
#else /* CONFIG_PAGING_BINPATH */
#elif defined(CONFIG_PAGING_M25PX)
static inline void lpc313x_initsrc(void)
{
#ifdef CONFIG_DEBUG
uint32_t capacity;
int ret;
#endif
/* Are we already initialized? */
#if defined(CONFIG_LPC313x_SPI_INTERRUPTS) || defined(CONFIG_LPC313x_SPI_DMA)
if (!g_pgsrc.initialized)
#endif
{
pgvdbg("Initializing\n");
/* First get an instance of the SPI device interface */
FAR struct spi_dev_s *spi = up_spiinitialize(CONFIG_PAGING_M25PX_SPIPORT);
DEBUGASSERT(spi != NULL);
/* Then bind the SPI interface to the M25Px MTD driver */
g_pgsrc.mtd = m25p_initialize(spi);
DEBUGASSERT(g_pgsrc.mtd != NULL);
/* Verify that we can use the device */
#ifdef CONFIG_DEBUG
/* Get the device geometry. (casting to uintptr_t first eliminates
* complaints on some architectures where the sizeof long is different
* from the size of a pointer).
*/
ret = MTD_IOCTL(g_pgsrc.mtd, MTDIOC_GEOMETRY, (unsigned long)&g_pgsrc.geo);
DEBUGASSERT(ret >= 0);
capacity = g_pgsrc.geo.erasesize*g_pgsrc.geo.neraseblocks;
pgllvdbg("capacity: %d\n", capacity);
DEBUGASSERT(capacity >= (CONFIG_PAGING_M25PX_BINOFFSET + PG_TEXT_VSIZE));
#endif
#if defined(CONFIG_LPC313x_SPI_INTERRUPTS) || defined(CONFIG_LPC313x_SPI_DMA)
g_pgsrc.initialized = true;
#endif
}
}
#else
# define lpc313x_initsrc()
#endif /* CONFIG_PAGING_BINPATH */
#endif
/****************************************************************************
* Public Functions
@ -277,10 +390,13 @@ static inline void lpc313x_initsrc(void)
int up_fillpage(FAR _TCB *tcb, FAR void *vpage)
{
#ifdef CONFIG_PAGING_BINPATH
#if defined(CONFIG_PAGING_BINPATH)
ssize_t nbytes;
off_t offset;
off_t pos;
#elif defined(CONFIG_PAGING_M25PX)
ssize_t nbytes;
off_t offset;
#endif
pgdbg("TCB: %p vpage: %p far: %08x\n", tcb, vpage, tcb->xcp.far);
@ -291,7 +407,7 @@ int up_fillpage(FAR _TCB *tcb, FAR void *vpage)
* time that up_fillpage() is called. Are we initialized?
*/
#ifdef CONFIG_PAGING_BINPATH
#if defined(CONFIG_PAGING_BINPATH)
/* Perform initialization of the paging source device (if necessary and
* appropriate)
@ -303,7 +419,7 @@ int up_fillpage(FAR _TCB *tcb, FAR void *vpage)
* virtual address. File offset 0 corresponds to PG_LOCKED_VBASE.
*/
offset = (off_t)vpage - PG_LOCKED_VBASE;
offset = (off_t)tcb->xcp.far - PG_LOCKED_VBASE;
/* Seek to that position */
@ -316,15 +432,41 @@ int up_fillpage(FAR _TCB *tcb, FAR void *vpage)
DEBUGASSERT(nbytes == PAGESIZE);
return OK;
#else /* CONFIG_PAGING_BINPATH */
#elif defined(CONFIG_PAGING_M25PX) /* !CONFIG_PAGING_BINPATH */
/* If CONFIG_PAGING_M25PX is defined, use the m25px.c FLASH driver. If this
* is selected, then the MTD interface to the MP25x device will be used to
* support paging.
*
* If the driver is configured to use interrupts or DMA, then it must be
* initialized in this context.
*/
#if defined(CONFIG_LPC313x_SPI_INTERRUPTS) || defined(CONFIG_LPC313x_SPI_DMA)
lpc313x_initsrc();
#endif
/* Create an offset into the binary image that corresponds to the
* virtual address. File offset 0 corresponds to PG_LOCKED_VBASE.
*/
offset = (off_t)tcb->xcp.far - PG_LOCKED_VBASE + CONFIG_PAGING_M25PX_BINOFFSET;
/* Read the page at the correct offset into the SPI FLASH device */
nbytes = MTD_READ(g_pgsrc.mtd, offset, PAGESIZE, (FAR uint8_t *)vpage);
DEBUGASSERT(nbytes == PAGESIZE);
return OK;
#else /* !CONFIG_PAGING_BINPATH && !CONFIG_PAGING_M25PX */
# warning "Not implemented"
return -ENOSYS;
#endif /* CONFIG_PAGING_BINPATH */
#endif /* !CONFIG_PAGING_BINPATH && !CONFIG_PAGING_M25PX */
}
#else
#else /* CONFIG_PAGING_BLOCKINGFILL */
/* Version 2: Supports non-blocking, asynchronous fill operations */
@ -333,8 +475,10 @@ int up_fillpage(FAR _TCB *tcb, FAR void *vpage, up_pgcallback_t pg_callback)
pgdbg("TCB: %p vpage: %d far: %08x\n", tcb, vpage, tcb->xcp.far);
DEBUGASSERT(tcb->xcp.far >= PG_PAGED_VBASE && tcb->xcp.far < PG_PAGED_VEND);
#ifdef CONFIG_PAGING_BINPATH
#if defined(CONFIG_PAGING_BINPATH)
# error "File system-based paging must always be implemented with blocking calls"
#elif defined(CONFIG_PAGING_M25PX)
# error "SPI FLASH paging must always be implemented with blocking calls"
#else
# warning "Not implemented"
#endif
@ -367,7 +511,8 @@ void weak_function lpc313x_pginitialize(void)
* that it is called.
*/
#ifdef CONFIG_PAGING_BINPATH
#if defined(CONFIG_PAGING_BINPATH)
/* If BINPATH is defined, then it is the full path to a file on a mounted file
* system. However, in this case, initialization will involve some higher level
* file system operations. Since this function is called from a low level (before
@ -375,6 +520,22 @@ void weak_function lpc313x_pginitialize(void)
* operations yet. Therefore, initialization will be deferred until the first
* time that up_fillpage() is called.
*/
#elif defined(CONFIG_PAGING_M25PX)
/* If CONFIG_PAGING_M25PX is defined, use the m25px.c FLASH driver. If this
* is selected, then the MTD interface to the MP25x device will be used to
* support paging.
*
* If the driver is not configured to use interrupts or DMA, then it is
* probably safe to initialize it in this context.
*/
#if !defined(CONFIG_LPC313x_SPI_INTERRUPTS) && !defined(CONFIG_LPC313x_SPI_DMA)
lpc313x_initsrc();
#endif
#endif
}

2
nuttx/configs/ea3131/src/up_leds.c
View File

@ -2,7 +2,7 @@
* configs/ea3131/src/up_leds.c
* arch/arm/src/board/up_leds.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without

2
nuttx/configs/ea3131/src/up_mem.c
View File

@ -2,7 +2,7 @@
* configs/ea3131/src/up_mem.c
* arch/arm/src/board/up_mem.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* References:

2
nuttx/configs/ea3131/src/up_spi.c
View File

@ -2,7 +2,7 @@
* configs/ea3131/src/up_spi.c
* arch/arm/src/board/up_spi.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without