diff --git a/configs/us7032evb1/nsh/Make.defs b/configs/us7032evb1/nsh/Make.defs deleted file mode 100644 index 3f418c1a3..000000000 --- a/configs/us7032evb1/nsh/Make.defs +++ /dev/null @@ -1,97 +0,0 @@ -############################################################################## -# configs/olimex-strp711/nsh/Make.defs -# -# Copyright (C) 2008 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################## - -include ${TOPDIR}/.config - -ifeq ("${CONFIG_DEBUG}","y") - ARCHOPTIMIZATION = -g -else - ARCHOPTIMIZATION = -Os -fno-strict-aliasing -fno-strength-reduce \ - -fomit-frame-pointer -endif - -ARCHCPUFLAGS = -m1 -fno-builtin -ARCHPICFLAGS = -fpic -ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -ARCHDEFINES = -ARCHINCLUDES = -I. -isystem $(TOPDIR)/include -ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/ld.script - -CROSSDEV = sh-elf- -CC = $(CROSSDEV)gcc -LD = $(CROSSDEV)ld -AR = $(CROSSDEV)ar rcs -NM = $(CROSSDEV)nm -OBJCOPY = $(CROSSDEV)objcopy -OBJDUMP = $(CROSSDEV)objdump - -CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \ - $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe -AFLAGS = $(CFLAGS) -D__ASSEMBLY__ - -OBJEXT = .o -LIBEXT = .a -EXEEXT = - -ifeq ("${CONFIG_DEBUG}","y") - LDFLAGS += -g -endif - -define COMPILE - @echo "CC: $1" - @$(CC) -c $(CFLAGS) $1 -o $2 -endef - -define ASSEMBLE - @echo "AS: $1" - @$(CC) -c $(AFLAGS) $1 -o $2 -endef - -define ARCHIVE - echo "AR: $2"; \ - $(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; } -endef - -define CLEAN - @rm -f *.o *.a -endef - -MKDEP = $(TOPDIR)/tools/mkdeps.sh - -HOSTCC = gcc -HOSTINCLUDES = -I. -HOSTCFLAGS = -Wall -wstrict-prototypes -Wshadow -g -pipe -HOSTLDFLAGS = - diff --git a/configs/us7032evb1/nsh/defconfig b/configs/us7032evb1/nsh/defconfig deleted file mode 100644 index c07d4b6ff..000000000 --- a/configs/us7032evb1/nsh/defconfig +++ /dev/null @@ -1,561 +0,0 @@ -############################################################################ -# configs/us7032evb1/nsh/defconfig -# -# Copyright (C) 2008 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ -# -# Architecture selection -# -# CONFIG_ARCH - identifies the arch subdirectory and, hence, the -# processor architecture. -# CONFIG_ARCH_name - for use in C code. This identifies the -# particular chip or SoC that the architecture is implemented -# in. -# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory -# CONFIG_ARCH_CHIP_name - For use in C code -# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence, -# the board that supports the particular chip or SoC. -# CONFIG_ENDIAN_BIG - define if big endian (default is little endian) -# CONFIG_ARCH_BOARD_name - for use in C code -# CONFIG_ARCH_NOINTC - define if the architecture does not -# support an interrupt controller or otherwise cannot support -# APIs like up_enable_irq() and up_disable_irq(). -# CONFIG_ARCH_IRQPRIO -# Define if the architecture suports prioritizaton of interrupts -# and the up_prioritize_irq() API. -# CONFIG_ENDIAN_BIG - Define for big-endian operation -# CONFIG_BOARD_LOOPSPERMSEC - for delay loops -# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to Olimex STR-P711 -# CONFIG_ARCH_BUTTONS - Support reading buttons. Unique to Olimex STR-P711 -# CONFIG_DRAM_SIZE - Describes the internal DRAM. -# CONFIG_DRAM_START - The start address of internal DRAM -# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt -# stack. If defined, this symbol is the size of the interrupt -# stack in bytes. If not defined, the user task stacks will be -# used during interrupt handling. -# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions -# -CONFIG_ARCH=sh -CONFIG_ARCH_CHIP=sh1 -CONFIG_ARCH_SH1=y -CONFIG_ARCH_SH7032=y -CONFIG_ARCH_BOARD=us7032evb1 -CONFIG_ARCH_BOARD_US7032EVB1=y -CONFIG_ENDIAN_BIG=y -CONFIG_ARCH_NOINTC=y -CONFIG_ARCH_IRQPRIO=y -CONFIG_BOARD_LOOPSPERMSEC=572 -CONFIG_ARCH_LEDS=y -CONFIG_ARCH_BUTTONS=y -CONFIG_DRAM_SIZE=0x0000e000 -CONFIG_DRAM_START=0x0a002000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) -CONFIG_ARCH_INTERRUPTSTACK=0 -CONFIG_ARCH_STACKDUMP=y - -# -# SH-1 specific boot/build settings -# -CONFIG_SH1_DMAC0=n -CONFIG_SH1_DMAC1=n -CONFIG_SH1_DMAC2=n -CONFIG_SH1_DMAC3=n -CONFIG_SH1_ITU1=n -CONFIG_SH1_ITU2=n -CONFIG_SH1_ITU3=n -CONFIG_SH1_ITU4=n -CONFIG_SH1_SCI0=n -CONFIG_SH1_SCI1=y -CONFIG_SH1_PCU=n -CONFIG_SH1_AD=n -CONFIG_SH1_WDT=n -CONFIG_SH1_CMI=n - -# -# SH1 specific device driver settings -# -# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the -# console and ttys0 (default is the UART0). -# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received. -# This specific the size of the receive buffer -# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before -# being sent. This specific the size of the transmit buffer -# CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be -# CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8. -# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity, 3=mark 1, 4=space 0 -# CONFIG_UARTn_2STOP - Two stop bits -# -CONFIG_SCI0_SERIAL_CONSOLE=n -CONFIG_SCI1_SERIAL_CONSOLE=y -CONFIG_SCI0_TXBUFSIZE=64 -CONFIG_SCI1_TXBUFSIZE=256 -CONFIG_SCI0_RXBUFSIZE=32 -CONFIG_SCI1_RXBUFSIZE=256 -CONFIG_SCI0_BAUD=9600 -CONFIG_SCI1_BAUD=9600 -CONFIG_SCI0_BITS=8 -CONFIG_SCI1_BITS=8 -CONFIG_SCI0_PARITY=0 -CONFIG_SCI1_PARITY=0 -CONFIG_SCI0_2STOP=0 -CONFIG_SCI1_2STOP=0 - -# -# General build options -# -# CONFIG_RRLOAD_BINARY - make the rrload binary format used with -# BSPs from www.ridgerun.com using the tools/mkimage.sh script -# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format -# used with many different loaders using the GNU objcopy program -# Should not be selected if you are not using the GNU toolchain. -# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format -# used with many different loaders using the GNU objcopy program -# Should not be selected if you are not using the GNU toolchain. -# CONFIG_RAW_BINARY - make a raw binary format file used with many -# different loaders using the GNU objcopy program. This option -# should not be selected if you are not using the GNU toolchain. -# CONFIG_HAVE_LIBM - toolchain supports libm.a -# -CONFIG_RRLOAD_BINARY=n -CONFIG_INTELHEX_BINARY=n -CONFIG_MOTOROLA_SREC=y -CONFIG_RAW_BINARY=y -CONFIG_HAVE_LIBM=n - -# -# General OS setup -# -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build -# CONFIG_DEBUG - enables built-in debug options -# CONFIG_DEBUG_VERBOSE - enables verbose debug output -# CONFIG_MM_REGIONS - If the architecture includes multiple -# regions of memory to allocate from, this specifies the -# number of memory regions that the memory manager must -# handle and enables the API mm_addregion(start, end); -# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot -# time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to -# inform NuttX that the processor hardware is providing -# system timer interrupts at some interrupt interval other -# than 10 msec. -# CONFIG_RR_INTERVAL - The round robin timeslice will be set -# this number of milliseconds; Round robin scheduling can -# be disabled by setting this value to zero. -# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in -# scheduler to monitor system performance -# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a -# task name to save in the TCB. Useful if scheduler -# instrumentation is selected. Set to zero to disable. -# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY - -# Used to initialize the internal time logic. -# CONFIG_JULIAN_TIME - Enables Julian time conversions -# CONFIG_DEV_CONSOLE - Set if architecture-specific logic -# provides /dev/console. Enables stdout, stderr, stdin. -# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console -# driver (minimul support) -# -CONFIG_EXAMPLE=nsh -CONFIG_DEBUG=n -CONFIG_DEBUG_VERBOSE=n -CONFIG_MM_REGIONS=1 -CONFIG_ARCH_LOWPUTC=y -CONFIG_RR_INTERVAL=0 -CONFIG_SCHED_INSTRUMENTATION=n -CONFIG_TASK_NAME_SIZE=0 -CONFIG_START_YEAR=2008 -CONFIG_START_MONTH=11 -CONFIG_START_DAY=10 -CONFIG_JULIAN_TIME=n -CONFIG_DEV_CONSOLE=y -CONFIG_DEV_LOWCONSOLE=n - -# -# The following can be used to disable categories of -# APIs supported by the OS. If the compiler supports -# weak functions, then it should not be necessary to -# disable functions unless you want to restrict usage -# of those APIs. -# -# There are certain dependency relationships in these -# features. -# -# o mq_notify logic depends on signals to awaken tasks -# waiting for queues to become full or empty. -# o pthread_condtimedwait() depends on signals to wake -# up waiting tasks. -# -CONFIG_DISABLE_CLOCK=y -CONFIG_DISABLE_POSIX_TIMERS=y -CONFIG_DISABLE_PTHREAD=y -CONFIG_DISABLE_SIGNALS=y -CONFIG_DISABLE_MQUEUE=y -CONFIG_DISABLE_MOUNTPOINT=y -CONFIG_DISABLE_ENVIRON=n - -# -# Misc libc settings -# -# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a -# little smaller if we do not support fieldwidthes -# -CONFIG_NOPRINTF_FIELDWIDTH=y - -# -# Allow for architecture optimized implementations -# -# The architecture can provide optimized versions of the -# following to improve sysem performance -# -CONFIG_ARCH_MEMCPY=n -CONFIG_ARCH_MEMCMP=n -CONFIG_ARCH_MEMMOVE=n -CONFIG_ARCH_MEMSET=n -CONFIG_ARCH_STRCMP=n -CONFIG_ARCH_STRCPY=n -CONFIG_ARCH_STRNCPY=n -CONFIG_ARCH_STRLEN=n -CONFIG_ARCH_BZERO=n -CONFIG_ARCH_KMALLOC=n -CONFIG_ARCH_KZMALLOC=n -CONFIG_ARCH_KFREE=n - -# -# Sizes of configurable things (0 disables) -# -# CONFIG_MAX_TASKS - The maximum number of simultaneously -# active tasks. This value must be a power of two. -# CONFIG_MAX_TASK_ARGS - This controls the maximum number of -# of parameters that a task may receive (i.e., maxmum value -# of 'argc') -# CONFIG_NPTHREAD_KEYS - The number of items of thread- -# specific data that can be retained -# CONFIG_NFILE_DESCRIPTORS - The maximum number of file -# descriptors (one for each open) -# CONFIG_NFILE_STREAMS - The maximum number of streams that -# can be fopen'ed -# CONFIG_NAME_MAX - The maximum size of a file name. -# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate -# on fopen. (Only if CONFIG_NFILE_STREAMS > 0) -# CONFIG_NUNGET_CHARS - Number of characters that can be -# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0) -# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message -# structures. The system manages a pool of preallocated -# message structures to minimize dynamic allocations -# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with -# a fixed payload size given by this settin (does not include -# other message structure overhead. -# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that -# can be passed to a watchdog handler -# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog -# structures. The system manages a pool of preallocated -# watchdog structures to minimize dynamic allocations -# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX -# timer structures. The system manages a pool of preallocated -# timer structures to minimize dynamic allocations. Set to -# zero for all dynamic allocations. -# -CONFIG_MAX_TASKS=8 -CONFIG_MAX_TASK_ARGS=4 -CONFIG_NPTHREAD_KEYS=0 -CONFIG_NFILE_DESCRIPTORS=8 -CONFIG_NFILE_STREAMS=8 -CONFIG_NAME_MAX=32 -CONFIG_STDIO_BUFFER_SIZE=0 -CONFIG_NUNGET_CHARS=0 -CONFIG_PREALLOC_MQ_MSGS=0 -CONFIG_MQ_MAXMSGSIZE=0 -CONFIG_MAX_WDOGPARMS=2 -CONFIG_PREALLOC_WDOGS=4 -CONFIG_PREALLOC_TIMERS=0 - -# -# Filesystem configuration -# -# CONFIG_FS_FAT - Enable FAT filesystem support -# CONFIG_FAT_SECTORSIZE - Max supported sector size -# CONFIG_FS_ROMFS - Enable ROMFS filesystem support -CONFIG_FS_FAT=n -CONFIG_FS_ROMFS=n - -# -# SPI-based MMC/SD driver -# -# CONFIG_MMCSD_NSLOTS -# Number of MMC/SD slots supported by the driver -# CONFIG_MMCSD_READONLY -# Provide read-only access (default is read/write) -CONFIG_MMCSD_NSLOTS=1 -CONFIG_MMCSD_READONLY=n - -# -# TCP/IP and UDP support via uIP -# CONFIG_NET - Enable or disable all network features -# CONFIG_NET_IPv6 - Build in support for IPv6 -# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread. -# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options -# CONFIG_NET_BUFSIZE - uIP buffer size -# CONFIG_NET_TCP - TCP support on or off -# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks) -# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers -# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero) -# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks) -# CONFIG_NET_UDP - UDP support on or off -# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off -# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections -# CONFIG_NET_ICMP - ICMP ping response support on or off -# CONFIG_NET_ICMP_PING - ICMP ping request support on or off -# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address -# CONFIG_NET_STATISTICS - uIP statistics on or off -# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window -# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table -# CONFIG_NET_BROADCAST - Broadcast support -# CONFIG_NET_LLH_LEN - The link level header length -# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates -CONFIG_NET=n -CONFIG_NET_IPv6=n -CONFIG_NSOCKET_DESCRIPTORS=0 -CONFIG_NET_SOCKOPTS=y -CONFIG_NET_BUFSIZE=420 -CONFIG_NET_TCP=n -CONFIG_NET_TCP_CONNS=40 -CONFIG_NET_MAX_LISTENPORTS=40 -CONFIG_NET_UDP=n -CONFIG_NET_UDP_CHECKSUMS=y -#CONFIG_NET_UDP_CONNS=10 -CONFIG_NET_ICMP=n -CONFIG_NET_ICMP_PING=n -#CONFIG_NET_PINGADDRCONF=0 -CONFIG_NET_STATISTICS=y -#CONFIG_NET_RECEIVE_WINDOW= -#CONFIG_NET_ARPTAB_SIZE=8 -CONFIG_NET_BROADCAST=n -#CONFIG_NET_LLH_LEN=14 -#CONFIG_NET_FWCACHE_SIZE=2 - -# -# UIP Network Utilities -# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP -# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries -CONFIG_NET_DHCP_LIGHT=n -CONFIG_NET_RESOLV_ENTRIES=4 - -# -# USB Device Configuration -# -# CONFIG_USBDEV -# Enables USB device support -# CONFIG_USBDEV_ISOCHRONOUS -# Build in extra support for isochronous endpoints -# CONFIG_USBDEV_DUALSPEED -# Hardware handles high and full speed operation (USB 2.0) -# CONFIG_USBDEV_SELFPOWERED -# Will cause USB features to indicate that the device is -# self-powered -# CONFIG_USBDEV_MAXPOWER -# Maximum power consumption in mA -# CONFIG_USBDEV_TRACE -# Enables USB tracing for debug -# CONFIG_USBDEV_TRACE_NRECORDS -# Number of trace entries to remember -CONFIG_USBDEV=n -CONFIG_USBDEV_ISOCHRONOUS=n -CONFIG_USBDEV_DUALSPEED=n -CONFIG_USBDEV_SELFPOWERED=y -CONFIG_USBDEV_REMOTEWAKEUP=n -CONFIG_USBDEV_MAXPOWER=100 -CONFIG_USBDEV_TRACE=n -CONFIG_USBDEV_TRACE_NRECORDS=128 - -# -# USB Serial Device Configuration -# -# CONFIG_USBSER -# Enable compilation of the USB serial driver -# CONFIG_USBSER_EPINTIN -# The logical 7-bit address of a hardware endpoint that supports -# interrupt IN operation -# CONFIG_USBSER_EPBULKOUT -# The logical 7-bit address of a hardware endpoint that supports -# bulk OUT operation -# CONFIG_USBSER_EPBULKIN -# The logical 7-bit address of a hardware endpoint that supports -# bulk IN operation -# CONFIG_USBSER_NWRREQS and CONFIG_USBSER_NRDREQS -# The number of write/read requests that can be in flight -# CONFIG_USBSER_VENDORID and CONFIG_USBSER_VENDORSTR -# The vendor ID code/string -# CONFIG_USBSER_PRODUCTID and CONFIG_USBSER_PRODUCTSTR -# The product ID code/string -# CONFIG_USBSER_RXBUFSIZE and CONFIG_USBSER_TXBUFSIZE -# Size of the serial receive/transmit buffers -CONFIG_USBSER=n -CONFIG_USBSER_EPINTIN=1 -CONFIG_USBSER_EPBULKOUT=2 -CONFIG_USBSER_EPBULKIN=5 -CONFIG_USBSER_NWRREQS=4 -CONFIG_USBSER_NRDREQS=4 -CONFIG_USBSER_VENDORID=0x067b -CONFIG_USBSER_PRODUCTID=0x2303 -CONFIG_USBSER_VENDORSTR="Nuttx" -CONFIG_USBSER_PRODUCTSTR="USBdev Serial" -CONFIG_USBSER_RXBUFSIZE=512 -CONFIG_USBSER_TXBUFSIZE=512 - -# -# USB Storage Device Configuration -# -# CONFIG_USBSTRG -# Enable compilation of the USB storage driver -# CONFIG_USBSTRG_EP0MAXPACKET -# Max packet size for endpoint 0 -# CONFIG_USBSTRG_EPBULKOUT and CONFIG_USBSTRG_EPBULKIN -# The logical 7-bit address of a hardware endpoints that support -# bulk OUT and IN operations -# CONFIG_USBSTRG_NWRREQS and CONFIG_USBSTRG_NRDREQS -# The number of write/read requests that can be in flight -# CONFIG_USBSTRG_BULKINREQLEN and CONFIG_USBSTRG_BULKOUTREQLEN -# The size of the buffer in each write/read request. This -# value needs to be at least as large as the endpoint -# maxpacket and ideally as large as a block device sector. -# CONFIG_USBSTRG_VENDORID and CONFIG_USBSTRG_VENDORSTR -# The vendor ID code/string -# CONFIG_USBSTRG_PRODUCTID and CONFIG_USBSTRG_PRODUCTSTR -# The product ID code/string -# CONFIG_USBSTRG_REMOVABLE -# Select if the media is removable -CONFIG_USBSTRG=n -CONFIG_USBSTRG_EP0MAXPACKET=64 -CONFIG_USBSTRG_EPBULKOUT=2 -CONFIG_USBSTRG_EPBULKIN=5 -CONFIG_USBSTRG_NRDREQS=2 -CONFIG_USBSTRG_NWRREQS=2 -CONFIG_USBSTRG_BULKINREQLEN=256 -CONFIG_USBSTRG_BULKOUTREQLEN=256 -CONFIG_USBSTRG_VENDORID=0x584e -CONFIG_USBSTRG_VENDORSTR="NuttX" -CONFIG_USBSTRG_PRODUCTID=0x5342 -CONFIG_USBSTRG_PRODUCTSTR="USBdev Storage" -CONFIG_USBSTRG_VERSIONNO=0x0399 -CONFIG_USBSTRG_REMOVABLE=y - -# -# Settings for examples/ostest -CONFIG_EXAMPLES_OSTEST_LOOPS=1 -CONFIG_EXAMPLES_OSTEST_STACKSIZE=4096 -CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 - -# -# Settings for examples/nsh -# -# CONFIG_EXAMPLES_NSH_FILEIOSIZE - Size of a static I/O buffer -# CONFIG_EXAMPLES_NSH_STRERROR - Use strerror(errno) -# CONFIG_EXAMPLES_NSH_LINELEN - Maximum length of one command line -# CONFIG_EXAMPLES_NSH_STACKSIZE - Stack size to use for new threads. -# CONFIG_EXAMPLES_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi -# CONFIG_EXAMPLES_NSH_DISABLESCRIPT - Disable scripting support -# CONFIG_EXAMPLES_NSH_DISABLEBG - Disable background commands -# CONFIG_EXAMPLES_NSH_ROMFSETC - Use startup script in /etc -# CONFIG_EXAMPLES_NSH_CONSOLE - Use serial console front end -# CONFIG_EXAMPLES_NSH_TELNET - Use telnetd console front end -# -# If CONFIG_EXAMPLES_NSH_TELNET is selected: -# CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size -# CONFIG_EXAMPLES_NSH_DHCPC - Obtain address using DHCP -# CONFIG_EXAMPLES_NSH_IPADDR - Provides static IP address -# CONFIG_EXAMPLES_NSH_DRIPADDR - Provides static router IP address -# CONFIG_EXAMPLES_NSH_NETMASK - Provides static network mask -# CONFIG_EXAMPLES_NSH_NOMAC - Use a bogus MAC address -# -# If CONFIG_EXAMPLES_NSH_ROMFSETC is selected: -# CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT - ROMFS mountpoint -# CONFIG_EXAMPLES_NSH_INITSCRIPT - Relative path to init script -# CONFIG_EXAMPLES_NSH_ROMFSDEVNO - ROMFS RAM device minor -# CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE - ROMF sector size -# CONFIG_EXAMPLES_NSH_FATDEVNO - FAT FS RAM device minor -# CONFIG_EXAMPLES_NSH_FATSECTSIZE - FAT FS sector size -# CONFIG_EXAMPLES_NSH_FATNSECTORS - FAT FS number of sectors -# CONFIG_EXAMPLES_NSH_FATMOUNTPT - FAT FS mountpoint -CONFIG_EXAMPLES_NSH_FILEIOSIZE=512 -CONFIG_EXAMPLES_NSH_STRERROR=n -CONFIG_EXAMPLES_NSH_LINELEN=64 -CONFIG_EXAMPLES_NSH_STACKSIZE=2048 -CONFIG_EXAMPLES_NSH_NESTDEPTH=3 -CONFIG_EXAMPLES_NSH_DISABLESCRIPT=n -CONFIG_EXAMPLES_NSH_DISABLEBG=n -CONFIG_EXAMPLES_NSH_ROMFSETC=n -CONFIG_EXAMPLES_NSH_CONSOLE=y -CONFIG_EXAMPLES_NSH_TELNET=n -CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE=512 -CONFIG_EXAMPLES_NSH_DHCPC=n -CONFIG_EXAMPLES_NSH_NOMAC=n -CONFIG_EXAMPLES_NSH_IPADDR=(10<<24|0<<16|0<<8|2) -CONFIG_EXAMPLES_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1) -CONFIG_EXAMPLES_NSH_NETMASK=(255<<24|255<<16|255<<8|0) -CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT="/etc" -CONFIG_EXAMPLES_NSH_INITSCRIPT="init.d/rcS" -CONFIG_EXAMPLES_NSH_ROMFSDEVNO=0 -CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE=64 -CONFIG_EXAMPLES_NSH_FATDEVNO=1 -CONFIG_EXAMPLES_NSH_FATSECTSIZE=512 -CONFIG_EXAMPLES_NSH_FATNSECTORS=1024 -CONFIG_EXAMPLES_NSH_FATMOUNTPT=/tmp - -# -# Architecture-specific NSH options -CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO=1 -CONFIG_EXAMPLES_NSH_MMCSDSLOTNO=0 -CONFIG_EXAMPLES_NSH_MMCSDMINOR=0 - -# -# Stack and heap information -# -# CONFIG_BOOT_FROM_FLASH - Some configurations support XIP -# operation from FLASH. -# CONFIG_CUSTOM_STACK - The up_ implementation will handle -# all stack operations outside of the nuttx model. -# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only) -# CONFIG_PROC_STACK_SIZE - The size of the initial stack -# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size -# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size -# CONFIG_HEAP_BASE - The beginning of the heap -# CONFIG_HEAP_SIZE - The size of the heap -# -CONFIG_BOOT_FROM_FLASH=n -CONFIG_CUSTOM_STACK=n -CONFIG_STACK_POINTER= -CONFIG_PROC_STACK_SIZE=1024 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=1024 -CONFIG_HEAP_BASE= -CONFIG_HEAP_SIZE= diff --git a/configs/us7032evb1/nsh/ld.script b/configs/us7032evb1/nsh/ld.script deleted file mode 100644 index 6deaddeb6..000000000 --- a/configs/us7032evb1/nsh/ld.script +++ /dev/null @@ -1,91 +0,0 @@ -/**************************************************************************** - * configs/us7032evb1/nsh/ld.script - * - * Copyright (C) 2008 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -OUTPUT_ARCH(sh) -ENTRY(_stext) -SECTIONS -{ - /* The us7032evb1 has CMON in PROM beginning at address 0x00000000 and - * either 64Kb or 256Kb of SRAM beginning at 0x0a000000. Neither the - * PROM nor the first 8Kb of SRAM are avaible to the devoleper as these - * are used by CMON. The next 1Kb of SRAM is dedicated to relocated - * interrupt vectors. - */ - - . = 0x0a002000; - .text : { - _svect = ABSOLUTE(.); - *(.vects); /* Relocated interrupt vectors */ - _evect = ABSOLUTE(.); - _stext = ABSOLUTE(.); - *(.reset) /* Reset/IRQ code */ - *(.text) /* Code */ - *(.fixup) - *(.gnu.warning) - *(.rodata) /* Read-only data */ - *(.rodata.str1.4) - *(.glue_7) - *(.glue_7t) - *(.got) /* Global offset table */ - _etext = ABSOLUTE(.); - } - - .data : { - _sdata = ABSOLUTE(.); - *(.data) /* Modifiable data */ - CONSTRUCTORS - _edata = ABSOLUTE(.); - } - - .bss : { /* BSS */ - _sbss = ABSOLUTE(.); - *(.bss) - *(COMMON) - _ebss = ABSOLUTE(.); - } - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/configs/us7032evb1/nsh/setenv.sh b/configs/us7032evb1/nsh/setenv.sh deleted file mode 100755 index 93f7c2b32..000000000 --- a/configs/us7032evb1/nsh/setenv.sh +++ /dev/null @@ -1,47 +0,0 @@ -#!/bin/bash -# configs/us7032evb1/nsh/setenv.sh -# -# Copyright (C) 2008 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# - -if [ "$(basename $0)" = "setenv.sh" ] ; then - echo "You must source this script, not run it!" 1>&2 - exit 1 -fi - -if [ -z ${PATH_ORIG} ]; then export PATH_ORIG=${PATH}; fi - -WD=`pwd` -export BUILDROOT_BIN=${WD}/../buildroot/build_sh/staging_dir/bin -export SH1BINARIES=$WD/configs/us7032evb1/bin -export PATH=${BUILDROOT_BIN}:${SH1BINARIES}:/sbin:/usr/sbin:${PATH_ORIG} - -echo "PATH : ${PATH}"