Adding configuration for SH-1 US7032EVB1
git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@1133 7fd9a85b-ad96-42d3-883c-3090e2eb8679
This commit is contained in:
patacongo
parent
f3bb7152a3
commit
0a28b66f53
|
|
@ -0,0 +1,11 @@
|
|||
shterm
|
||||
^^^^^^
|
||||
|
||||
The USB7032EVB1 supports CMON in PROM. CMON requires special
|
||||
serial interactions in order to upload and download program files.
|
||||
Therefore, a standard terminal emulation program (such as minicom)
|
||||
cannot be used.
|
||||
|
||||
The shterm subdirectory contains a small terminal emulation
|
||||
program that supports these special interactions for file transfers.
|
||||
|
||||
|
|
@ -0,0 +1,2 @@
|
|||
This directory contains scripts and host executables unique to the Hitachi
|
||||
SH-1 Low-Cost Evaluation Board, US7032EVB1
|
||||
|
|
@ -0,0 +1,2 @@
|
|||
This directory contains header files unique to the Hitachi SH-1 Low-Cost
|
||||
Evaluation Board, US7032EVB1
|
||||
|
|
@ -0,0 +1,97 @@
|
|||
##############################################################################
|
||||
# configs/olimex-strp711/ostest/Make.defs
|
||||
#
|
||||
# Copyright (C) 2008 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
##############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
|
||||
ifeq ("${CONFIG_DEBUG}","y")
|
||||
ARCHOPTIMIZATION = -g
|
||||
else
|
||||
ARCHOPTIMIZATION = -Os -fno-strict-aliasing -fno-strength-reduce \
|
||||
-fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ARCHCPUFLAGS = -mapcs-32 -mcpu=arm7tdmi -msoft-float -fno-builtin
|
||||
ARCHPICFLAGS = -fpic
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||
ARCHDEFINES =
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script
|
||||
|
||||
CROSSDEV = arm-elf-
|
||||
CC = $(CROSSDEV)gcc
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(CROSSDEV)ar rcs
|
||||
NM = $(CROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \
|
||||
$(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifeq ("${CONFIG_DEBUG}","y")
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
|
||||
define COMPILE
|
||||
@echo "CC: $1"
|
||||
@$(CC) -c $(CFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define ASSEMBLE
|
||||
@echo "AS: $1"
|
||||
@$(CC) -c $(AFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define ARCHIVE
|
||||
echo "AR: $2"; \
|
||||
$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
|
||||
endef
|
||||
|
||||
define CLEAN
|
||||
@rm -f *.o *.a
|
||||
endef
|
||||
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -wstrict-prototypes -Wshadow -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
|
||||
|
|
@ -0,0 +1,559 @@
|
|||
############################################################################
|
||||
# configs/us7032evb1/ostest/defconfig
|
||||
#
|
||||
# Copyright (C) 2008 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
#
|
||||
# Architecture selection
|
||||
#
|
||||
# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
|
||||
# processor architecture.
|
||||
# CONFIG_ARCH_name - for use in C code. This identifies the
|
||||
# particular chip or SoC that the architecture is implemented
|
||||
# in.
|
||||
# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
|
||||
# CONFIG_ARCH_CHIP_name - For use in C code
|
||||
# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
|
||||
# the board that supports the particular chip or SoC.
|
||||
# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
|
||||
# CONFIG_ARCH_BOARD_name - for use in C code
|
||||
# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
|
||||
# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to Olimex STR-P711
|
||||
# CONFIG_ARCH_BUTTONS - Support reading buttons. Unique to Olimex STR-P711
|
||||
# CONFIG_DRAM_SIZE - Describes the internal DRAM.
|
||||
# CONFIG_DRAM_START - The start address of internal DRAM
|
||||
# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
||||
# stack. If defined, this symbol is the size of the interrupt
|
||||
# stack in bytes. If not defined, the user task stacks will be
|
||||
# used during interrupt handling.
|
||||
# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
||||
#
|
||||
CONFIG_ARCH=sh
|
||||
CONFIG_ARCH_CHIP=sh1
|
||||
CONFIG_ARCH_SH1=y
|
||||
CONFIG_ARCH_BOARD=us7032evb1
|
||||
CONFIG_ARCH_BOARD_US7032EVB1=y
|
||||
CONFIG_BOARD_LOOPSPERMSEC=3270
|
||||
CONFIG_ARCH_LEDS=y
|
||||
CONFIG_ARCH_BUTTONS=y
|
||||
CONFIG_DRAM_SIZE=0x0000e000
|
||||
CONFIG_DRAM_START=0x0a002000
|
||||
CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
|
||||
CONFIG_ARCH_INTERRUPTSTACK=0
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
|
||||
#
|
||||
# SH-1 specific boot/build settings
|
||||
#
|
||||
|
||||
#
|
||||
# SH1 specific device driver settings
|
||||
#
|
||||
# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
|
||||
# console and ttys0 (default is the UART0).
|
||||
# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
|
||||
# This specific the size of the receive buffer
|
||||
# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
|
||||
# being sent. This specific the size of the transmit buffer
|
||||
# CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be
|
||||
# CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8.
|
||||
# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity, 3=mark 1, 4=space 0
|
||||
# CONFIG_UARTn_2STOP - Two stop bits
|
||||
#
|
||||
CONFIG_UART0_SERIAL_CONSOLE=y
|
||||
CONFIG_UART1_SERIAL_CONSOLE=n
|
||||
CONFIG_UART0_TXBUFSIZE=256
|
||||
CONFIG_UART1_TXBUFSIZE=256
|
||||
CONFIG_UART0_RXBUFSIZE=256
|
||||
CONFIG_UART1_RXBUFSIZE=256
|
||||
CONFIG_UART0_BAUD=38400
|
||||
CONFIG_UART1_BAUD=38400
|
||||
CONFIG_UART0_BITS=8
|
||||
CONFIG_UART1_BITS=8
|
||||
CONFIG_UART0_PARITY=0
|
||||
CONFIG_UART1_PARITY=0
|
||||
CONFIG_UART0_2STOP=0
|
||||
CONFIG_UART1_2STOP=0
|
||||
|
||||
#
|
||||
# General build options
|
||||
#
|
||||
# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
|
||||
# BSPs from www.ridgerun.com using the tools/mkimage.sh script
|
||||
# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
|
||||
# used with many different loaders using the GNU objcopy program
|
||||
# Should not be selected if you are not using the GNU toolchain.
|
||||
# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format
|
||||
# used with many different loaders using the GNU objcopy program
|
||||
# Should not be selected if you are not using the GNU toolchain.
|
||||
# CONFIG_RAW_BINARY - make a raw binary format file used with many
|
||||
# different loaders using the GNU objcopy program. This option
|
||||
# should not be selected if you are not using the GNU toolchain.
|
||||
# CONFIG_HAVE_LIBM - toolchain supports libm.a
|
||||
#
|
||||
CONFIG_RRLOAD_BINARY=n
|
||||
CONFIG_INTELHEX_BINARY=n
|
||||
CONFIG_MOTOROLA_SREC=y
|
||||
CONFIG_RAW_BINARY=y
|
||||
CONFIG_HAVE_LIBM=n
|
||||
|
||||
#
|
||||
# General OS setup
|
||||
#
|
||||
# CONFIG_EXAMPLE - identifies the subdirectory in examples
|
||||
# that will be used in the build
|
||||
# CONFIG_DEBUG - enables built-in debug options
|
||||
# CONFIG_DEBUG_VERBOSE - enables verbose debug output
|
||||
# CONFIG_MM_REGIONS - If the architecture includes multiple
|
||||
# regions of memory to allocate from, this specifies the
|
||||
# number of memory regions that the memory manager must
|
||||
# handle and enables the API mm_addregion(start, end);
|
||||
# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
|
||||
# time console output
|
||||
# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
|
||||
# or TICKS_PER_MSEC=10. This setting may be defined to
|
||||
# inform NuttX that the processor hardware is providing
|
||||
# system timer interrupts at some interrupt interval other
|
||||
# than 10 msec.
|
||||
# CONFIG_RR_INTERVAL - The round robin timeslice will be set
|
||||
# this number of milliseconds; Round robin scheduling can
|
||||
# be disabled by setting this value to zero.
|
||||
# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in
|
||||
# scheduler to monitor system performance
|
||||
# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
|
||||
# task name to save in the TCB. Useful if scheduler
|
||||
# instrumentation is selected. Set to zero to disable.
|
||||
# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
|
||||
# Used to initialize the internal time logic.
|
||||
# CONFIG_JULIAN_TIME - Enables Julian time conversions
|
||||
# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
|
||||
# provides /dev/console. Enables stdout, stderr, stdin.
|
||||
# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
|
||||
# driver (minimul support)
|
||||
#
|
||||
CONFIG_EXAMPLE=ostest
|
||||
CONFIG_DEBUG=n
|
||||
CONFIG_DEBUG_VERBOSE=n
|
||||
CONFIG_MM_REGIONS=1
|
||||
CONFIG_ARCH_LOWPUTC=y
|
||||
CONFIG_RR_INTERVAL=0
|
||||
CONFIG_SCHED_INSTRUMENTATION=n
|
||||
CONFIG_TASK_NAME_SIZE=0
|
||||
CONFIG_START_YEAR=2008
|
||||
CONFIG_START_MONTH=10
|
||||
CONFIG_START_DAY=1
|
||||
CONFIG_JULIAN_TIME=n
|
||||
CONFIG_DEV_CONSOLE=y
|
||||
CONFIG_DEV_LOWCONSOLE=y
|
||||
|
||||
#
|
||||
# The following can be used to disable categories of
|
||||
# APIs supported by the OS. If the compiler supports
|
||||
# weak functions, then it should not be necessary to
|
||||
# disable functions unless you want to restrict usage
|
||||
# of those APIs.
|
||||
#
|
||||
# There are certain dependency relationships in these
|
||||
# features.
|
||||
#
|
||||
# o mq_notify logic depends on signals to awaken tasks
|
||||
# waiting for queues to become full or empty.
|
||||
# o pthread_condtimedwait() depends on signals to wake
|
||||
# up waiting tasks.
|
||||
#
|
||||
CONFIG_DISABLE_CLOCK=n
|
||||
CONFIG_DISABLE_POSIX_TIMERS=n
|
||||
CONFIG_DISABLE_PTHREAD=n
|
||||
CONFIG_DISABLE_SIGNALS=n
|
||||
CONFIG_DISABLE_MQUEUE=n
|
||||
CONFIG_DISABLE_MOUNTPOINT=y
|
||||
CONFIG_DISABLE_ENVIRON=y
|
||||
|
||||
#
|
||||
# Misc libc settings
|
||||
#
|
||||
# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
|
||||
# little smaller if we do not support fieldwidthes
|
||||
#
|
||||
CONFIG_NOPRINTF_FIELDWIDTH=n
|
||||
|
||||
#
|
||||
# Allow for architecture optimized implementations
|
||||
#
|
||||
# The architecture can provide optimized versions of the
|
||||
# following to improve sysem performance
|
||||
#
|
||||
CONFIG_ARCH_MEMCPY=n
|
||||
CONFIG_ARCH_MEMCMP=n
|
||||
CONFIG_ARCH_MEMMOVE=n
|
||||
CONFIG_ARCH_MEMSET=n
|
||||
CONFIG_ARCH_STRCMP=n
|
||||
CONFIG_ARCH_STRCPY=n
|
||||
CONFIG_ARCH_STRNCPY=n
|
||||
CONFIG_ARCH_STRLEN=n
|
||||
CONFIG_ARCH_BZERO=n
|
||||
CONFIG_ARCH_KMALLOC=n
|
||||
CONFIG_ARCH_KZMALLOC=n
|
||||
CONFIG_ARCH_KFREE=n
|
||||
|
||||
#
|
||||
# Sizes of configurable things (0 disables)
|
||||
#
|
||||
# CONFIG_MAX_TASKS - The maximum number of simultaneously
|
||||
# active tasks. This value must be a power of two.
|
||||
# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
|
||||
# of parameters that a task may receive (i.e., maxmum value
|
||||
# of 'argc')
|
||||
# CONFIG_NPTHREAD_KEYS - The number of items of thread-
|
||||
# specific data that can be retained
|
||||
# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
|
||||
# descriptors (one for each open)
|
||||
# CONFIG_NFILE_STREAMS - The maximum number of streams that
|
||||
# can be fopen'ed
|
||||
# CONFIG_NAME_MAX - The maximum size of a file name.
|
||||
# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
|
||||
# on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
|
||||
# CONFIG_NUNGET_CHARS - Number of characters that can be
|
||||
# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
|
||||
# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
|
||||
# structures. The system manages a pool of preallocated
|
||||
# message structures to minimize dynamic allocations
|
||||
# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
|
||||
# a fixed payload size given by this settin (does not include
|
||||
# other message structure overhead.
|
||||
# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
|
||||
# can be passed to a watchdog handler
|
||||
# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
|
||||
# structures. The system manages a pool of preallocated
|
||||
# watchdog structures to minimize dynamic allocations
|
||||
# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
|
||||
# timer structures. The system manages a pool of preallocated
|
||||
# timer structures to minimize dynamic allocations. Set to
|
||||
# zero for all dynamic allocations.
|
||||
#
|
||||
CONFIG_MAX_TASKS=16
|
||||
CONFIG_MAX_TASK_ARGS=4
|
||||
CONFIG_NPTHREAD_KEYS=4
|
||||
CONFIG_NFILE_DESCRIPTORS=8
|
||||
CONFIG_NFILE_STREAMS=8
|
||||
CONFIG_NAME_MAX=32
|
||||
CONFIG_STDIO_BUFFER_SIZE=256
|
||||
CONFIG_NUNGET_CHARS=2
|
||||
CONFIG_PREALLOC_MQ_MSGS=4
|
||||
CONFIG_MQ_MAXMSGSIZE=32
|
||||
CONFIG_MAX_WDOGPARMS=2
|
||||
CONFIG_PREALLOC_WDOGS=4
|
||||
CONFIG_PREALLOC_TIMERS=4
|
||||
|
||||
#
|
||||
# Filesystem configuration
|
||||
#
|
||||
# CONFIG_FS_FAT - Enable FAT filesystem support
|
||||
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
||||
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
||||
CONFIG_FS_FAT=n
|
||||
CONFIG_FS_ROMFS=n
|
||||
|
||||
#
|
||||
# SPI-based MMC/SD driver
|
||||
#
|
||||
# CONFIG_MMCSD_NSLOTS
|
||||
# Number of MMC/SD slots supported by the driver
|
||||
# CONFIG_MMCSD_READONLY
|
||||
# Provide read-only access (default is read/write)
|
||||
CONFIG_MMCSD_NSLOTS=1
|
||||
CONFIG_MMCSD_READONLY=n
|
||||
|
||||
#
|
||||
# TCP/IP and UDP support via uIP
|
||||
# CONFIG_NET - Enable or disable all network features
|
||||
# CONFIG_NET_IPv6 - Build in support for IPv6
|
||||
# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread.
|
||||
# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options
|
||||
# CONFIG_NET_BUFSIZE - uIP buffer size
|
||||
# CONFIG_NET_TCP - TCP support on or off
|
||||
# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks)
|
||||
# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers
|
||||
# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero)
|
||||
# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks)
|
||||
# CONFIG_NET_UDP - UDP support on or off
|
||||
# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off
|
||||
# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections
|
||||
# CONFIG_NET_ICMP - ICMP ping response support on or off
|
||||
# CONFIG_NET_ICMP_PING - ICMP ping request support on or off
|
||||
# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address
|
||||
# CONFIG_NET_STATISTICS - uIP statistics on or off
|
||||
# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window
|
||||
# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table
|
||||
# CONFIG_NET_BROADCAST - Broadcast support
|
||||
# CONFIG_NET_LLH_LEN - The link level header length
|
||||
# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
|
||||
CONFIG_NET=n
|
||||
CONFIG_NET_IPv6=n
|
||||
CONFIG_NSOCKET_DESCRIPTORS=0
|
||||
CONFIG_NET_SOCKOPTS=y
|
||||
CONFIG_NET_BUFSIZE=420
|
||||
CONFIG_NET_TCP=n
|
||||
CONFIG_NET_TCP_CONNS=40
|
||||
CONFIG_NET_MAX_LISTENPORTS=40
|
||||
CONFIG_NET_UDP=n
|
||||
CONFIG_NET_UDP_CHECKSUMS=y
|
||||
#CONFIG_NET_UDP_CONNS=10
|
||||
CONFIG_NET_ICMP=n
|
||||
CONFIG_NET_ICMP_PING=n
|
||||
#CONFIG_NET_PINGADDRCONF=0
|
||||
CONFIG_NET_STATISTICS=y
|
||||
#CONFIG_NET_RECEIVE_WINDOW=
|
||||
#CONFIG_NET_ARPTAB_SIZE=8
|
||||
CONFIG_NET_BROADCAST=n
|
||||
#CONFIG_NET_LLH_LEN=14
|
||||
#CONFIG_NET_FWCACHE_SIZE=2
|
||||
|
||||
#
|
||||
# UIP Network Utilities
|
||||
# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP
|
||||
# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries
|
||||
CONFIG_NET_DHCP_LIGHT=n
|
||||
CONFIG_NET_RESOLV_ENTRIES=4
|
||||
|
||||
#
|
||||
# USB Device Configuration
|
||||
#
|
||||
# CONFIG_USBDEV
|
||||
# Enables USB device support
|
||||
# CONFIG_USBDEV_ISOCHRONOUS
|
||||
# Build in extra support for isochronous endpoints
|
||||
# CONFIG_USBDEV_DUALSPEED
|
||||
# Hardware handles high and full speed operation (USB 2.0)
|
||||
# CONFIG_USBDEV_SELFPOWERED
|
||||
# Will cause USB features to indicate that the device is
|
||||
# self-powered
|
||||
# CONFIG_USBDEV_MAXPOWER
|
||||
# Maximum power consumption in mA
|
||||
# CONFIG_USBDEV_TRACE
|
||||
# Enables USB tracing for debug
|
||||
# CONFIG_USBDEV_TRACE_NRECORDS
|
||||
# Number of trace entries to remember
|
||||
CONFIG_USBDEV=n
|
||||
CONFIG_USBDEV_ISOCHRONOUS=n
|
||||
CONFIG_USBDEV_DUALSPEED=n
|
||||
CONFIG_USBDEV_SELFPOWERED=y
|
||||
CONFIG_USBDEV_REMOTEWAKEUP=n
|
||||
CONFIG_USBDEV_MAXPOWER=100
|
||||
CONFIG_USBDEV_TRACE=n
|
||||
CONFIG_USBDEV_TRACE_NRECORDS=128
|
||||
|
||||
#
|
||||
# STR71X USB Configuration
|
||||
#
|
||||
# CONFIG_STR71X_USBDEV_FRAME_INTERRUPT
|
||||
# Handle USB Start-Of-Frame events.
|
||||
# Enable reading SOF from interrupt handler vs. simply reading on demand.
|
||||
# Probably a bad idea... Unless there is some issue with sampling the SOF
|
||||
# from hardware asynchronously.
|
||||
# CONFIG_STR71X_USBDEV_EPFAST_INTERRUPT
|
||||
# Enable high priority interrupts. I have no idea why you might want to
|
||||
# do that
|
||||
# CONFIG_STR71X_USBDEV_NDMADESCRIPTORS
|
||||
# Number of DMA descriptors to allocate in the 8Kb USB RAM. This is a
|
||||
# tradeoff between the number of DMA channels that can be supported vs
|
||||
# the size of the DMA buffers available.
|
||||
# CONFIG_STR71X_USBDEV_DMA
|
||||
# Enable str71x-specific DMA support
|
||||
CONFIG_STR71X_USBDEV_FRAME_INTERRUPT=n
|
||||
CONFIG_STR71X_USBDEV_EPFAST_INTERRUPT=n
|
||||
CONFIG_STR71X_USBDEV_DMA=n
|
||||
CONFIG_STR71X_USBDEV_NDMADESCRIPTORS=0
|
||||
CONFIG_STR71X_USBDEV_DMAINTMASK=0
|
||||
|
||||
#
|
||||
# USB Serial Device Configuration
|
||||
#
|
||||
# CONFIG_USBSER
|
||||
# Enable compilation of the USB serial driver
|
||||
# CONFIG_USBSER_EPINTIN
|
||||
# The logical 7-bit address of a hardware endpoint that supports
|
||||
# interrupt IN operation
|
||||
# CONFIG_USBSER_EPBULKOUT
|
||||
# The logical 7-bit address of a hardware endpoint that supports
|
||||
# bulk OUT operation
|
||||
# CONFIG_USBSER_EPBULKIN
|
||||
# The logical 7-bit address of a hardware endpoint that supports
|
||||
# bulk IN operation
|
||||
# # CONFIG_USBSER_NWRREQS and CONFIG_USBSER_NRDREQS
|
||||
# The number of write/read requests that can be in flight
|
||||
# CONFIG_USBSER_VENDORID and CONFIG_USBSER_VENDORSTR
|
||||
# The vendor ID code/string
|
||||
# CONFIG_USBSER_PRODUCTID and CONFIG_USBSER_PRODUCTSTR
|
||||
# The product ID code/string
|
||||
# CONFIG_USBSER_RXBUFSIZE and CONFIG_USBSER_TXBUFSIZE
|
||||
# Size of the serial receive/transmit buffers
|
||||
CONFIG_USBSER=n
|
||||
CONFIG_USBSER_EPINTIN=1
|
||||
CONFIG_USBSER_EPBULKOUT=2
|
||||
CONFIG_USBSER_EPBULKIN=5
|
||||
CONFIG_USBSER_NWRREQS=4
|
||||
CONFIG_USBSER_NRDREQS=4
|
||||
CONFIG_USBSER_VENDORID=0x067b
|
||||
CONFIG_USBSER_PRODUCTID=0x2303
|
||||
CONFIG_USBSER_VENDORSTR="Nuttx"
|
||||
CONFIG_USBSER_PRODUCTSTR="USBdev Serial"
|
||||
CONFIG_USBSER_RXBUFSIZE=512
|
||||
CONFIG_USBSER_TXBUFSIZE=512
|
||||
|
||||
#
|
||||
# USB Storage Device Configuration
|
||||
#
|
||||
# CONFIG_USBSTRG
|
||||
# Enable compilation of the USB storage driver
|
||||
# CONFIG_USBSTRG_EP0MAXPACKET
|
||||
# Max packet size for endpoint 0
|
||||
# CONFIG_USBSTRG_EPBULKOUT and CONFIG_USBSTRG_EPBULKIN
|
||||
# The logical 7-bit address of a hardware endpoints that support
|
||||
# bulk OUT and IN operations
|
||||
# CONFIG_USBSTRG_NWRREQS and CONFIG_USBSTRG_NRDREQS
|
||||
# The number of write/read requests that can be in flight
|
||||
# CONFIG_USBSTRG_BULKINREQLEN and CONFIG_USBSTRG_BULKOUTREQLEN
|
||||
# The size of the buffer in each write/read request. This
|
||||
# value needs to be at least as large as the endpoint
|
||||
# maxpacket and ideally as large as a block device sector.
|
||||
# CONFIG_USBSTRG_VENDORID and CONFIG_USBSTRG_VENDORSTR
|
||||
# The vendor ID code/string
|
||||
# CONFIG_USBSTRG_PRODUCTID and CONFIG_USBSTRG_PRODUCTSTR
|
||||
# The product ID code/string
|
||||
# CONFIG_USBSTRG_REMOVABLE
|
||||
# Select if the media is removable
|
||||
CONFIG_USBSTRG=n
|
||||
CONFIG_USBSTRG_EP0MAXPACKET=64
|
||||
CONFIG_USBSTRG_EPBULKOUT=2
|
||||
CONFIG_USBSTRG_EPBULKIN=5
|
||||
CONFIG_USBSTRG_NRDREQS=2
|
||||
CONFIG_USBSTRG_NWRREQS=2
|
||||
CONFIG_USBSTRG_BULKINREQLEN=256
|
||||
CONFIG_USBSTRG_BULKOUTREQLEN=256
|
||||
CONFIG_USBSTRG_VENDORID=0x584e
|
||||
CONFIG_USBSTRG_VENDORSTR="NuttX"
|
||||
CONFIG_USBSTRG_PRODUCTID=0x5342
|
||||
CONFIG_USBSTRG_PRODUCTSTR="USBdev Storage"
|
||||
CONFIG_USBSTRG_VERSIONNO=0x0399
|
||||
CONFIG_USBSTRG_REMOVABLE=y
|
||||
|
||||
#
|
||||
# Settings for examples/ostest
|
||||
CONFIG_EXAMPLES_OSTEST_LOOPS=1
|
||||
CONFIG_EXAMPLES_OSTEST_STACKSIZE=4096
|
||||
CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
|
||||
|
||||
#
|
||||
# Settings for examples/nsh
|
||||
#
|
||||
# CONFIG_EXAMPLES_NSH_FILEIOSIZE - Size of a static I/O buffer
|
||||
# CONFIG_EXAMPLES_NSH_STRERROR - Use strerror(errno)
|
||||
# CONFIG_EXAMPLES_NSH_LINELEN - Maximum length of one command line
|
||||
# CONFIG_EXAMPLES_NSH_STACKSIZE - Stack size to use for new threads.
|
||||
# CONFIG_EXAMPLES_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
|
||||
# CONFIG_EXAMPLES_NSH_DISABLESCRIPT - Disable scripting support
|
||||
# CONFIG_EXAMPLES_NSH_DISABLEBG - Disable background commands
|
||||
# CONFIG_EXAMPLES_NSH_ROMFSETC - Use startup script in /etc
|
||||
# CONFIG_EXAMPLES_NSH_CONSOLE - Use serial console front end
|
||||
# CONFIG_EXAMPLES_NSH_TELNET - Use telnetd console front end
|
||||
#
|
||||
# If CONFIG_EXAMPLES_NSH_TELNET is selected:
|
||||
# CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size
|
||||
# CONFIG_EXAMPLES_NSH_DHCPC - Obtain address using DHCP
|
||||
# CONFIG_EXAMPLES_NSH_IPADDR - Provides static IP address
|
||||
# CONFIG_EXAMPLES_NSH_DRIPADDR - Provides static router IP address
|
||||
# CONFIG_EXAMPLES_NSH_NETMASK - Provides static network mask
|
||||
# CONFIG_EXAMPLES_NSH_NOMAC - Use a bogus MAC address
|
||||
#
|
||||
# If CONFIG_EXAMPLES_NSH_ROMFSETC is selected:
|
||||
# CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT - ROMFS mountpoint
|
||||
# CONFIG_EXAMPLES_NSH_INITSCRIPT - Relative path to init script
|
||||
# CONFIG_EXAMPLES_NSH_ROMFSDEVNO - ROMFS RAM device minor
|
||||
# CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE - ROMF sector size
|
||||
# CONFIG_EXAMPLES_NSH_FATDEVNO - FAT FS RAM device minor
|
||||
# CONFIG_EXAMPLES_NSH_FATSECTSIZE - FAT FS sector size
|
||||
# CONFIG_EXAMPLES_NSH_FATNSECTORS - FAT FS number of sectors
|
||||
# CONFIG_EXAMPLES_NSH_FATMOUNTPT - FAT FS mountpoint
|
||||
CONFIG_EXAMPLES_NSH_FILEIOSIZE=512
|
||||
CONFIG_EXAMPLES_NSH_STRERROR=n
|
||||
CONFIG_EXAMPLES_NSH_LINELEN=64
|
||||
CONFIG_EXAMPLES_NSH_STACKSIZE=2048
|
||||
CONFIG_EXAMPLES_NSH_NESTDEPTH=3
|
||||
CONFIG_EXAMPLES_NSH_DISABLESCRIPT=n
|
||||
CONFIG_EXAMPLES_NSH_DISABLEBG=n
|
||||
CONFIG_EXAMPLES_NSH_ROMFSETC=n
|
||||
CONFIG_EXAMPLES_NSH_CONSOLE=y
|
||||
CONFIG_EXAMPLES_NSH_TELNET=n
|
||||
CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE=512
|
||||
CONFIG_EXAMPLES_NSH_DHCPC=n
|
||||
CONFIG_EXAMPLES_NSH_NOMAC=n
|
||||
CONFIG_EXAMPLES_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
|
||||
CONFIG_EXAMPLES_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
|
||||
CONFIG_EXAMPLES_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
|
||||
CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT="/etc"
|
||||
CONFIG_EXAMPLES_NSH_INITSCRIPT="init.d/rcS"
|
||||
CONFIG_EXAMPLES_NSH_ROMFSDEVNO=0
|
||||
CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE=64
|
||||
CONFIG_EXAMPLES_NSH_FATDEVNO=1
|
||||
CONFIG_EXAMPLES_NSH_FATSECTSIZE=512
|
||||
CONFIG_EXAMPLES_NSH_FATNSECTORS=1024
|
||||
CONFIG_EXAMPLES_NSH_FATMOUNTPT=/tmp
|
||||
|
||||
#
|
||||
# Architecture-specific NSH options
|
||||
CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO=1
|
||||
CONFIG_EXAMPLES_NSH_MMCSDSLOTNO=0
|
||||
CONFIG_EXAMPLES_NSH_MMCSDMINOR=0
|
||||
|
||||
#
|
||||
# Stack and heap information
|
||||
#
|
||||
# CONFIG_BOOT_FROM_FLASH - Some configurations support XIP
|
||||
# operation from FLASH.
|
||||
# CONFIG_CUSTOM_STACK - The up_ implementation will handle
|
||||
# all stack operations outside of the nuttx model.
|
||||
# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
|
||||
# CONFIG_PROC_STACK_SIZE - The size of the initial stack
|
||||
# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
|
||||
# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
|
||||
# CONFIG_HEAP_BASE - The beginning of the heap
|
||||
# CONFIG_HEAP_SIZE - The size of the heap
|
||||
#
|
||||
CONFIG_BOOT_FROM_FLASH=y
|
||||
CONFIG_CUSTOM_STACK=n
|
||||
CONFIG_STACK_POINTER=
|
||||
CONFIG_PROC_STACK_SIZE=2048
|
||||
CONFIG_PTHREAD_STACK_MIN=256
|
||||
CONFIG_PTHREAD_STACK_DEFAULT=2048
|
||||
CONFIG_HEAP_BASE=
|
||||
CONFIG_HEAP_SIZE=
|
||||
|
|
@ -0,0 +1,89 @@
|
|||
/****************************************************************************
|
||||
* configs/us7032evb1/ostest/ld.script
|
||||
*
|
||||
* Copyright (C) 2008 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
OUTPUT_ARCH(sh1)
|
||||
ENTRY(_stext)
|
||||
SECTIONS
|
||||
{
|
||||
/* The us7032evb1 has CMON in PROM beginning at address 0x00000000 and
|
||||
* either 64Kb or 256Kb of SRAM beginning at 0x0a000000. Neither the
|
||||
* PROM nor the first 8Kb of SRAM are avaible to the devoleper as these
|
||||
* are used by CMON. The next 8Kb of SRAM is dedicated to redirected
|
||||
* interrupt vectors.
|
||||
*/
|
||||
|
||||
.text 0x0a002000 : {
|
||||
_svect = ABSOLUTE(.);
|
||||
*(.vects); /* Redirected interrupt vectors */
|
||||
_evect = ABSOLUTE(.);
|
||||
_stext = ABSOLUTE(.);
|
||||
*(.text) /* Code */
|
||||
*(.fixup)
|
||||
*(.gnu.warning)
|
||||
*(.rodata) /* Read-only data */
|
||||
*(.rodata.str1.4)
|
||||
*(.glue_7)
|
||||
*(.glue_7t)
|
||||
*(.got) /* Global offset table */
|
||||
_etext = ABSOLUTE(.);
|
||||
}
|
||||
|
||||
.data : {
|
||||
_sdata = ABSOLUTE(.);
|
||||
*(.data) /* Modifiable data */
|
||||
CONSTRUCTORS
|
||||
_edata = ABSOLUTE(.);
|
||||
}
|
||||
|
||||
.bss : { /* BSS */
|
||||
_sbss = ABSOLUTE(.);
|
||||
*(.bss)
|
||||
*(COMMON)
|
||||
_ebss = ABSOLUTE(.);
|
||||
}
|
||||
/* Stabs debugging sections. */
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_info 0 : { *(.debug_info) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
}
|
||||
|
|
@ -0,0 +1,47 @@
|
|||
#!/bin/bash
|
||||
# configs/us7032evb1/ostest/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2008 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$(basename $0)" = "setenv.sh" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z ${PATH_ORIG} ]; then export PATH_ORIG=${PATH}; fi
|
||||
|
||||
WD=`pwd`
|
||||
export BUILDROOT_BIN=${WD}/../buildroot/build_arm_nofpu/staging_dir/bin
|
||||
export SH1BINARIES=$WD/configs/us7032evb11/bin
|
||||
export PATH=${BUILDROOT_BIN}:${SH1BINARIES}:/sbin:/usr/sbin:${PATH_ORIG}
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
|
|
@ -0,0 +1,51 @@
|
|||
############################################################################
|
||||
# config/us7032evb1/shterm/Makefile
|
||||
#
|
||||
# Copyright (C) 2008 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include $(TOPDIR)/.config
|
||||
include $(TOPDIR)/Make.defs
|
||||
|
||||
SRC = shterm.c
|
||||
BIN = shterm
|
||||
|
||||
all: ../bin/$(BIN)$(EXEEXT)
|
||||
|
||||
$(BIN)$(EXEEXT): $(SRC)
|
||||
$(HOSTCC) $(HOSTCFLAGS) $^ -o $@
|
||||
|
||||
../bin/$(BIN)$(EXEEXT): $(BIN)$(EXEEXT)
|
||||
install --mode 0755 $^ $@
|
||||
clean:
|
||||
@rm -f $(BIN)$(EXEEXT) ../bin/$(BIN)$(EXEEXT) *~ .*.swp *.o
|
||||
$(call CLEAN)
|
||||
|
|
@ -0,0 +1,606 @@
|
|||
/****************************************************************************
|
||||
* config/us7032evb1/shterm/shterm.c
|
||||
*
|
||||
* Copyright(C) 2008 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <sys/types.h>
|
||||
#include <sys/stat.h>
|
||||
#include <stdio.h>
|
||||
#include <stdlib.h>
|
||||
#include <unistd.h>
|
||||
#include <string.h>
|
||||
#include <signal.h>
|
||||
#include <termios.h>
|
||||
#include <fcntl.h>
|
||||
#include <errno.h>
|
||||
|
||||
/****************************************************************************
|
||||
* Definitions
|
||||
****************************************************************************/
|
||||
|
||||
/* Size of the circular buffer used for interrupt I/O */
|
||||
|
||||
#define MAX_FILEPATH 255
|
||||
|
||||
#define ENQ 5
|
||||
#define ACK 6
|
||||
|
||||
#define DEFAULT_BAUD 9600
|
||||
|
||||
#define dbg(format, arg...) if (debug > 0) printf(format, ##arg)
|
||||
|
||||
/****************************************************************************
|
||||
* Private Types
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Private Function Prototypes
|
||||
****************************************************************************/
|
||||
|
||||
static void sendfile(int fdtarg, char *filename, int verify);
|
||||
static void receivefile(int fdtarg, char *filename);
|
||||
static void getfilename(int fd, char *name);
|
||||
static int readbyte(int fd, char *ch);
|
||||
static void writebyte(int fd, char byte);
|
||||
static void close_tty(void);
|
||||
static void interrupt(int signo);
|
||||
static void show_usage(const char *progname, int exitcode);
|
||||
|
||||
/****************************************************************************
|
||||
* Private Data
|
||||
****************************************************************************/
|
||||
|
||||
static int debug = 0;
|
||||
static int g_fd = -1;
|
||||
static int g_fdnb = -1;
|
||||
static const char g_dfttydev[] = "/dev/ttyS0";
|
||||
static const char *g_ttydev = g_dfttydev;
|
||||
static int g_baud = DEFAULT_BAUD;
|
||||
static struct termios g_termios;
|
||||
|
||||
/****************************************************************************
|
||||
* Private Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: sendfile
|
||||
****************************************************************************/
|
||||
|
||||
static void sendfile(int fdtarg, char *filename, int verify)
|
||||
{
|
||||
char chin;
|
||||
char chout;
|
||||
int fdin;
|
||||
int nbytes;
|
||||
int ndots;
|
||||
int ret;
|
||||
|
||||
fdin = open(filename, O_RDONLY);
|
||||
if (fdin < 0)
|
||||
{
|
||||
fprintf(stderr, "ERROR: Failed to open '%s' for reading\n", filename);
|
||||
(void)writebyte(fdin, '>');
|
||||
return;
|
||||
}
|
||||
|
||||
if (verify)
|
||||
{
|
||||
printf("Verifying file '%s':\n", filename);
|
||||
}
|
||||
else
|
||||
{
|
||||
printf("Loading file '%s':\n", filename);
|
||||
}
|
||||
fflush(stdout);
|
||||
|
||||
while ((ret = readbyte(fdin, &chout)) == 1)
|
||||
{
|
||||
if (++nbytes > 256)
|
||||
{
|
||||
nbytes = 0;
|
||||
putchar('.');
|
||||
if (++ndots > 72)
|
||||
{
|
||||
putchar('\n');
|
||||
fflush(stdout);
|
||||
ndots = 0;
|
||||
}
|
||||
}
|
||||
|
||||
writebyte(fdtarg, chout);
|
||||
|
||||
do
|
||||
{
|
||||
ret = readbyte(fdtarg, &chin);
|
||||
if (ret == 1 && chin == '>')
|
||||
{
|
||||
close(fdin);
|
||||
writebyte(fdtarg, ACK);
|
||||
return;
|
||||
}
|
||||
}
|
||||
while (ret == 1 && chin != chout);
|
||||
}
|
||||
|
||||
writebyte(fdtarg, '>');
|
||||
do
|
||||
{
|
||||
ret = readbyte(fdtarg, &chin);
|
||||
}
|
||||
while (ret == 1 && chin != ENQ);
|
||||
close(fdin);
|
||||
writebyte(fdtarg, ACK);
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: receivefile
|
||||
****************************************************************************/
|
||||
|
||||
static void receivefile(int fdtarg, char *filename)
|
||||
{
|
||||
char ch;
|
||||
int fdout;
|
||||
int nbytes;
|
||||
int ndots;
|
||||
int ret;
|
||||
|
||||
fdout = open(filename, O_WRONLY | O_CREAT | O_TRUNC, 0644);
|
||||
if (fdout < 0)
|
||||
{
|
||||
fprintf(stderr, "ERROR: Failed to open '%s' for writing\n", filename);
|
||||
(void)writebyte(fdtarg, '>');
|
||||
return;
|
||||
}
|
||||
|
||||
printf("Receiving file '%s':\n", filename);
|
||||
fflush(stdout);
|
||||
(void)writebyte(fdtarg, '+');
|
||||
|
||||
/* Synchronize */
|
||||
|
||||
do
|
||||
{
|
||||
ret = readbyte(fdtarg, &ch);
|
||||
}
|
||||
while (ret == 1 && ch != 'S' && ch != 'Q');
|
||||
|
||||
nbytes = 0;
|
||||
ndots = 0;
|
||||
|
||||
/* Receive the file */
|
||||
|
||||
while (ret == 1)
|
||||
{
|
||||
/* Check for end-of-file */
|
||||
|
||||
if (ch == '>')
|
||||
{
|
||||
close(fdout);
|
||||
return;
|
||||
}
|
||||
|
||||
writebyte(fdout, ch);
|
||||
|
||||
if (++nbytes > 256)
|
||||
{
|
||||
nbytes = 0;
|
||||
putchar('.');
|
||||
if (++ndots > 72)
|
||||
{
|
||||
putchar('\n');
|
||||
ndots = 0;
|
||||
}
|
||||
fflush(stdout);
|
||||
}
|
||||
|
||||
ret = readbyte(fdtarg, &ch);
|
||||
if (ch == '\r')
|
||||
{
|
||||
writebyte(fdtarg, '+');
|
||||
}
|
||||
}
|
||||
|
||||
close (fdout);
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: getfilename
|
||||
****************************************************************************/
|
||||
|
||||
static void getfilename(int fd, char *name)
|
||||
{
|
||||
char ch;
|
||||
int ret;
|
||||
|
||||
/* Skip over spaces */
|
||||
|
||||
do
|
||||
{
|
||||
ret = readbyte(fd, &ch);
|
||||
}
|
||||
while(ch == ' ' && ret == 1);
|
||||
|
||||
/* Concatenate the filename */
|
||||
|
||||
while(ret == 1 && ch > ' ')
|
||||
{
|
||||
*name++ = ch;
|
||||
ret = readbyte(fd, &ch);
|
||||
}
|
||||
*name++ = 0;
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: readbyte
|
||||
****************************************************************************/
|
||||
|
||||
static int readbyte(int fd, char *ch)
|
||||
{
|
||||
int ret;
|
||||
|
||||
/* Read characters from the console, and echo them to the target tty */
|
||||
|
||||
ret = read(fd, ch, 1);
|
||||
if(ret < 0)
|
||||
{
|
||||
if(errno != EAGAIN)
|
||||
{
|
||||
printf("ERROR: Failed to read from fd=%d: %s\n", fd, strerror(errno));
|
||||
close_tty();
|
||||
exit(12);
|
||||
}
|
||||
return -EAGAIN;
|
||||
}
|
||||
else if(ret > 1)
|
||||
{
|
||||
printf("ERROR: Unexpected number of bytes read(%d) from fd=%d\n", ret, fd);
|
||||
close_tty();
|
||||
exit(13);
|
||||
}
|
||||
return ret;
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: writebyte
|
||||
****************************************************************************/
|
||||
|
||||
static void writebyte(int fd, char byte)
|
||||
{
|
||||
int ret = write(fd, &byte, 1);
|
||||
if(ret < 0)
|
||||
{
|
||||
printf("ERROR: Failed to write to fd=%d: %s\n", fd, strerror(errno));
|
||||
close_tty();
|
||||
exit(14);
|
||||
}
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: close_tty
|
||||
****************************************************************************/
|
||||
|
||||
static void close_tty(void)
|
||||
{
|
||||
int ret;
|
||||
|
||||
if (g_fdnb >= 0)
|
||||
{
|
||||
(void)close(g_fdnb);
|
||||
}
|
||||
|
||||
if (g_fd >= 0)
|
||||
{
|
||||
ret = tcsetattr(g_fd, TCSANOW, &g_termios);
|
||||
if (ret < 0)
|
||||
{
|
||||
printf("ERROR: Failed to restore termios for %s: %s\n", g_ttydev, strerror(errno));
|
||||
}
|
||||
(void)close(g_fd);
|
||||
}
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: interrupt
|
||||
****************************************************************************/
|
||||
|
||||
static void interrupt(int signo)
|
||||
{
|
||||
printf("Exit-ing...\n");
|
||||
close_tty();
|
||||
exit(0);
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: interrupt
|
||||
****************************************************************************/
|
||||
|
||||
static void show_usage(const char *progname, int exitcode)
|
||||
{
|
||||
fprintf(stderr, "\nUSAGE: %s [-h] [-t <ttyname>] [-b <baud>]\n", progname);
|
||||
fprintf(stderr, "\nWhere:\n");
|
||||
fprintf(stderr, "\t-h: Prints this message then exit.\n");
|
||||
fprintf(stderr, "\t-t <ttyname>: Use <ttyname> device instead of %s.\n", g_dfttydev);
|
||||
fprintf(stderr, "\t-b <baud>: Use <baud> instead of %d.\n", DEFAULT_BAUD);
|
||||
exit(exitcode);
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
int main(int argc, char **argv, char **envp)
|
||||
{
|
||||
struct termios tty;
|
||||
char filename[MAX_FILEPATH];
|
||||
char ch;
|
||||
int speed;
|
||||
int opt;
|
||||
int oflags;
|
||||
int ret;
|
||||
|
||||
while((opt = getopt(argc, argv, ":t:b:h")) != -1)
|
||||
{
|
||||
switch(opt)
|
||||
{
|
||||
case 'd':
|
||||
debug++;
|
||||
break;
|
||||
|
||||
case 't':
|
||||
g_ttydev = optarg;
|
||||
break;
|
||||
|
||||
case 'b':
|
||||
g_baud = atoi(optarg);
|
||||
break;
|
||||
|
||||
case ':':
|
||||
fprintf(stderr, "ERROR: Missing argument to option '%c'\n", optopt);
|
||||
show_usage(argv[0], 1);
|
||||
break;
|
||||
|
||||
case '?':
|
||||
fprintf(stderr, "ERROR: Unrecognized option '%c'\n", optopt);
|
||||
show_usage(argv[0], 2);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
if(optind < argc)
|
||||
{
|
||||
fprintf(stderr, "ERROR: Unexpected arguments at end of line\n");
|
||||
show_usage(argv[0], 3);
|
||||
}
|
||||
|
||||
switch(g_baud)
|
||||
{
|
||||
case 0: speed = B0; break;
|
||||
case 50: speed = B50; break;
|
||||
case 75: speed = B75; break;
|
||||
case 110: speed = B110; break;
|
||||
case 134: speed = B134; break;
|
||||
case 150: speed = B150; break;
|
||||
case 200: speed = B200; break;
|
||||
case 300: speed = B300; break;
|
||||
case 600: speed = B600; break;
|
||||
case 1200: speed = B1200; break;
|
||||
case 1800: speed = B1800; break;
|
||||
case 2400: speed = B2400; break;
|
||||
case 4800: speed = B4800; break;
|
||||
case 9600: speed = B9600; break;
|
||||
case 19200: speed = B19200; break;
|
||||
case 38400: speed = B38400; break;
|
||||
case 57600: speed = B57600; break;
|
||||
case 115200: speed = B115200; break;
|
||||
case 230400: speed = B230400; break;
|
||||
|
||||
default:
|
||||
fprintf(stderr, "ERROR: Unsupported BAUD=%d\n", g_baud);
|
||||
show_usage(argv[0], 4);
|
||||
}
|
||||
|
||||
/* Set the host stdin to O_NONBLOCK */
|
||||
|
||||
oflags = fcntl(0, F_GETFL, 0);
|
||||
if(oflags == -1)
|
||||
{
|
||||
fprintf(stderr, "ERROR: fnctl(F_GETFL) failed: %s\n", strerror(errno));
|
||||
return 5;
|
||||
}
|
||||
|
||||
ret = fcntl(0, F_SETFL, oflags | O_NONBLOCK);
|
||||
if(ret < 0)
|
||||
{
|
||||
fprintf(stderr, "ERROR: fnctl(F_SETFL) failed: %s\n", strerror(errno));
|
||||
return 6;
|
||||
}
|
||||
|
||||
/* Open the selected serial port (blocking)*/
|
||||
|
||||
g_fd = open(g_ttydev, O_RDWR);
|
||||
if(g_fd < 0)
|
||||
{
|
||||
printf("ERROR: Failed to open %s: %s\n", g_ttydev, strerror(errno));
|
||||
return 7;
|
||||
}
|
||||
|
||||
/* Configure the serial port in at the selected baud in 8-bit, no-parity, raw mode
|
||||
* and turn off echo, etc.
|
||||
*/
|
||||
|
||||
ret = tcgetattr(g_fd, &g_termios);
|
||||
if(ret < 0)
|
||||
{
|
||||
printf("ERROR: Failed to get termios for %s: %s\n", g_ttydev, strerror(errno));
|
||||
close(g_fd);
|
||||
return 8;
|
||||
}
|
||||
|
||||
memcpy(&tty, &g_termios, sizeof(struct termios));
|
||||
tty.c_iflag &= ~(IGNBRK|BRKINT|PARMRK|ISTRIP|INLCR|IGNCR|ICRNL|IXON);
|
||||
tty.c_oflag &= ~OPOST;
|
||||
tty.c_lflag &= ~(ECHO|ECHONL|ICANON|ISIG|IEXTEN);
|
||||
tty.c_cflag &= ~(CSIZE|PARENB);
|
||||
tty.c_cflag |= CS8;
|
||||
|
||||
(void)cfsetispeed(&tty, speed);
|
||||
(void)cfsetospeed(&tty, speed);
|
||||
|
||||
ret = tcsetattr(g_fd, TCSANOW, &tty);
|
||||
if(ret < 0)
|
||||
{
|
||||
printf("ERROR: Failed to set termios for %s: %s\n", g_ttydev, strerror(errno));
|
||||
close(g_fd);
|
||||
return 9;
|
||||
}
|
||||
|
||||
#if 1
|
||||
/* Open the selected serial port (non-blocking)*/
|
||||
|
||||
g_fdnb = open(g_ttydev, O_RDONLY | O_NONBLOCK);
|
||||
if(g_fdnb < 0)
|
||||
{
|
||||
printf("ERROR: Failed to open %s: %s\n", g_ttydev, strerror(errno));
|
||||
return 9;
|
||||
}
|
||||
#else
|
||||
/* Create a non-blocking copy of the configure tty descriptor */
|
||||
|
||||
g_fdnb = dup(g_fd);
|
||||
if (g_fdnb < 0)
|
||||
{
|
||||
printf("ERROR: Failed to dup %s fd=%d: %s\n", g_ttydev, g_fd, strerror(errno));
|
||||
close_tty();
|
||||
return 9;
|
||||
}
|
||||
|
||||
oflags = fcntl(g_fdnb, F_GETFL, 0);
|
||||
if(oflags == -1)
|
||||
{
|
||||
fprintf(stderr, "ERROR: fnctl(F_GETFL) failed: %s\n", strerror(errno));
|
||||
close_tty();
|
||||
return 10;
|
||||
}
|
||||
|
||||
ret = fcntl(g_fdnb, F_SETFL, oflags | O_NONBLOCK);
|
||||
if(ret < 0)
|
||||
{
|
||||
fprintf(stderr, "ERROR: fnctl(F_SETFL) failed: %s\n", strerror(errno));
|
||||
close_tty();
|
||||
return 11;
|
||||
}
|
||||
#endif
|
||||
|
||||
/* Catch attempts to control-C out of the program so that we can restore
|
||||
* the TTY settings.
|
||||
*/
|
||||
|
||||
signal(SIGINT, interrupt);
|
||||
|
||||
/* Loopo until control-C */
|
||||
|
||||
for(;;)
|
||||
{
|
||||
/* Read characters from the console, and echo them to the target tty */
|
||||
|
||||
ret = readbyte(0, &ch);
|
||||
if (ret == 0)
|
||||
{
|
||||
printf("End-of-file: exitting\n");
|
||||
close_tty();
|
||||
return 0;
|
||||
}
|
||||
else if (ret == 1)
|
||||
{
|
||||
writebyte(g_fd, ch);
|
||||
}
|
||||
|
||||
/* Read characters from target TTY and echo them on the console */
|
||||
|
||||
ret = readbyte(g_fdnb, &ch);
|
||||
if (ret == 0)
|
||||
{
|
||||
printf("ERROR: Unexpected number of bytes read(%d) from %s\n", ret, g_ttydev);
|
||||
close_tty();
|
||||
return 15;
|
||||
}
|
||||
else if (ret == 1)
|
||||
{
|
||||
if (ch == ENQ)
|
||||
{
|
||||
char ch1;
|
||||
char ch2;
|
||||
|
||||
writebyte(g_fd, '*');
|
||||
ret = readbyte(g_fd, &ch1);
|
||||
if (ret != 1)
|
||||
{
|
||||
printf("ERROR: Unexpected number of bytes read(%d) from %s\n", ret, g_ttydev);
|
||||
close_tty();
|
||||
return 16;
|
||||
}
|
||||
ret = readbyte(g_fd, &ch2);
|
||||
if (ret != 1)
|
||||
{
|
||||
printf("ERROR: Unexpected number of bytes read(%d) from %s\n", ret, g_ttydev);
|
||||
close_tty();
|
||||
return 17;
|
||||
}
|
||||
|
||||
getfilename(g_fd, filename);
|
||||
|
||||
if (ch1 == 'l' || ch1 == 'L')
|
||||
{
|
||||
sendfile(g_fd, filename, 0);
|
||||
}
|
||||
else if (ch1 == 'v' || ch1 == 'v')
|
||||
{
|
||||
sendfile(g_fd, filename, 1);
|
||||
}
|
||||
else if (ch1 == 's' || ch1 == 'S')
|
||||
{
|
||||
receivefile(g_fd, filename);
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
writebyte(1, ch);
|
||||
}
|
||||
}
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -0,0 +1,3 @@
|
|||
This directory contains drivers unique to the Hitachi SH-1 Low-Cost
|
||||
Evaluation Board, US7032EVB1
|
||||
|
||||
Loading…
Reference in New Issue