Add Sure PIC32 NSH configuration
git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@4216 7fd9a85b-ad96-42d3-883c-3090e2eb8679
This commit is contained in:
patacongo
parent
fbfa351f70
commit
04fd3b4cc8
|
|
@ -2288,5 +2288,8 @@
|
|||
Mohammad Elwakeel.
|
||||
* arch/arm/src/stm32/stm32_can.c. Add a low-level STM32 CAN driver. (Initial
|
||||
check is incomplete). Add loopback support to the driver.
|
||||
|
||||
|
||||
* arch/arm/src/stm32/stm32_adc.c. The ADC is now functional. A more complete
|
||||
driver would require DMA support. I have some questions still about the
|
||||
accuracy of the timer-driven sampling.
|
||||
* configs/sure-pic32mx/nsh. The PIC32 port if (finally) functionaal. Add an
|
||||
NSH configuration for the Sure PIC32MX board.
|
||||
|
|
|
|||
|
|
@ -366,7 +366,7 @@ CONFIG_HAVE_LIBM=n
|
|||
# CONFIG_DEBUG_VERBOSE - enables verbose debug output
|
||||
# CONFIG_DEBUG_SYMBOLS - build without optimization and with
|
||||
# debug symbols (needed for use with a debugger).
|
||||
# CONFIG_HAVE_CXX - Enable support for C++S
|
||||
# CONFIG_HAVE_CXX - Enable support for C++
|
||||
# CONFIG_MM_REGIONS - If the architecture includes multiple
|
||||
# regions of memory to allocate from, this specifies the
|
||||
# number of memory regions that the memory manager must
|
||||
|
|
|
|||
|
|
@ -0,0 +1,160 @@
|
|||
############################################################################
|
||||
# configs/sure-pic32mx/nsh/Make.defs
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
|
||||
# Setup for the selected toolchain
|
||||
|
||||
ifeq ($(CONFIG_PIC32MX_MICROCHIPW),y)
|
||||
# Microchip toolchain under Windows
|
||||
CROSSDEV = pic32-
|
||||
WINTOOL = y
|
||||
MAXOPTIMIZATION = -O2
|
||||
ARCHCPUFLAGS = -mprocessor=elf32pic32mx -mno-float -mlong32 -membedded-data
|
||||
ARCHPICFLAGS = -fpic -membedded-pic
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_PIC32MX_MICROCHIPW_LITE),y)
|
||||
# Microchip toolchain under Windows
|
||||
CROSSDEV = pic32-
|
||||
WINTOOL = y
|
||||
# MAXOPTIMIZATION = -O2
|
||||
ARCHCPUFLAGS = -mprocessor=elf32pic32mx -mno-float -mlong32 -membedded-data
|
||||
ARCHPICFLAGS = -fpic -membedded-pic
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_PIC32MX_MICROCHIPL),y)
|
||||
# Microchip toolchain under Linux
|
||||
CROSSDEV = pic32-
|
||||
MAXOPTIMIZATION = -O2
|
||||
ARCHCPUFLAGS = -mprocessor=elf32pic32mx -mno-float -mlong32 -membedded-data
|
||||
ARCHPICFLAGS = -fpic -membedded-pic
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_PIC32MX_MICROCHIPL_LITE),y)
|
||||
# Microchip toolchain under Linux
|
||||
CROSSDEV = pic32-
|
||||
# MAXOPTIMIZATION = -O2
|
||||
ARCHCPUFLAGS = -mprocessor=elf32pic32mx -mno-float -mlong32 -membedded-data
|
||||
ARCHPICFLAGS = -fpic -membedded-pic
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
DIRLINK = $(TOPDIR)/tools/winlink.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/ld.script}"
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/ld.script
|
||||
endif
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(CROSSDEV)ar rcs
|
||||
NM = $(CROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
|
||||
ARCHOPTIMIZATION = -g
|
||||
else
|
||||
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ARCHCFLAGS = -fno-builtin
|
||||
ARCHCXXFLAGS = -fno-builtin -fno-exceptions
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||
ARCHWARNINGSXX = -Wall -Wshadow
|
||||
ARCHDEFINES =
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
define PREPROCESS
|
||||
@echo "CPP: $1->$2"
|
||||
@$(CPP) $(CPPFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define COMPILE
|
||||
@echo "CC: $1"
|
||||
@$(CC) -c $(CFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define COMPILEXX
|
||||
@echo "CXX: $1"
|
||||
@$(CXX) -c $(CXXFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define ASSEMBLE
|
||||
@echo "AS: $1"
|
||||
@$(CC) -c $(AFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define ARCHIVE
|
||||
echo "AR: $2"; \
|
||||
$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
|
||||
endef
|
||||
|
||||
define CLEAN
|
||||
@rm -f *.o *.a
|
||||
endef
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
|
||||
|
|
@ -0,0 +1,60 @@
|
|||
############################################################################
|
||||
# configs/sure-pic32mx/nsh/appconfig
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
# Path to example in apps/examples containing the user_start entry point
|
||||
|
||||
CONFIGURED_APPS += examples/nsh
|
||||
|
||||
# The NSH application library
|
||||
|
||||
CONFIGURED_APPS += nshlib
|
||||
|
||||
# Applications configured as an NX built-in commands
|
||||
|
||||
ifeq ($(CONFIG_NET),y)
|
||||
CONFIGURED_APPS += netutils/uiplib
|
||||
CONFIGURED_APPS += netutils/resolv
|
||||
CONFIGURED_APPS += netutils/webclient
|
||||
CONFIGURED_APPS += netutils/tftpc
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_PWM),y)
|
||||
CONFIGURED_APPS += examples/pwm
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_CAN),y)
|
||||
CONFIGURED_APPS += examples/can
|
||||
endif
|
||||
|
||||
|
|
@ -0,0 +1,937 @@
|
|||
############################################################################
|
||||
# configs/sure-pic32mx/nsh/defconfig
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
#
|
||||
# architecture selection
|
||||
#
|
||||
# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
|
||||
# processor architecture.
|
||||
# CONFIG_ARCH_family - for use in C code. This identifies the
|
||||
# particular chip family that the architecture is implemented
|
||||
# in.
|
||||
# CONFIG_ARCH_architecture - for use in C code. This identifies the
|
||||
# specific architecture within the chip family.
|
||||
# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
|
||||
# CONFIG_ARCH_CHIP_name - For use in C code
|
||||
# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
|
||||
# the board that supports the particular chip or SoC.
|
||||
# CONFIG_ARCH_BOARD_name - for use in C code
|
||||
# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
|
||||
# NOTE: The PIC32MX is always little endian.
|
||||
# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
|
||||
# CONFIG_DRAM_SIZE - Describes the installed DRAM.
|
||||
# CONFIG_DRAM_START - The start address of DRAM (physical)
|
||||
# CONFIG_DRAM_END - Last address+1 of installed RAM
|
||||
# CONFIG_ARCH_IRQPRIO - The PIC32MX supports interrupt prioritization
|
||||
# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
||||
# stack. If defined, this symbol is the size of the interrupt
|
||||
# stack in bytes. If not defined, the user task stacks will be
|
||||
# used during interrupt handling.
|
||||
# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
||||
# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader.
|
||||
# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
|
||||
# CONFIG_ARCH_BUTTONS - Enable support for buttons. Unique to board architecture.
|
||||
# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
|
||||
# cause a 100 second delay during boot-up. This 100 second delay
|
||||
# serves no purpose other than it allows you to calibrate
|
||||
# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure
|
||||
# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
|
||||
# the delay actually is 100 seconds.
|
||||
# CONFIG_ARCH_DMA - Support DMA initialization
|
||||
#
|
||||
CONFIG_ARCH=mips
|
||||
CONFIG_ARCH_MIPS=y
|
||||
CONFIG_ARCH_MIPS32=y
|
||||
CONFIG_ARCH_CHIP=pic32mx
|
||||
CONFIG_ARCH_CHIP_PIC32MX440F512H=y
|
||||
CONFIG_ARCH_BOARD=sure-pic32mx
|
||||
CONFIG_ARCH_BOARD_SUREPIC32MX=y
|
||||
CONFIG_BOARD_LOOPSPERMSEC=8079
|
||||
CONFIG_DRAM_SIZE=(32*1024)
|
||||
CONFIG_DRAM_START=0xa0000000
|
||||
CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
|
||||
CONFIG_ARCH_IRQPRIO=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=n
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
CONFIG_ARCH_BOOTLOADER=n
|
||||
CONFIG_ARCH_LEDS=y
|
||||
CONFIG_ARCH_BUTTONS=n
|
||||
CONFIG_ARCH_CALIBRATION=n
|
||||
CONFIG_ARCH_DMA=n
|
||||
|
||||
#
|
||||
# Enable support for RAM-based functions
|
||||
# (If selected, then modifications are needed in ld.script as well)
|
||||
#
|
||||
CONFIG_PIC32MX_RAMFUNCS=n
|
||||
|
||||
#
|
||||
# Identify toolchain and linker options
|
||||
#
|
||||
CONFIG_PIC32MX_MICROCHIPW=n
|
||||
CONFIG_PIC32MX_MICROCHIPL=n
|
||||
CONFIG_PIC32MX_MICROCHIPW_LITE=y
|
||||
CONFIG_PIC32MX_MICROCHIPL_LITE=n
|
||||
|
||||
#
|
||||
# Individual subsystems can be enabled:
|
||||
#
|
||||
|
||||
CONFIG_PIC32MX_WDT=n
|
||||
CONFIG_PIC32MX_RTCC=n
|
||||
CONFIG_PIC32MX_TIMER1=n
|
||||
CONFIG_PIC32MX_TIMER2=n
|
||||
CONFIG_PIC32MX_TIMER3=n
|
||||
CONFIG_PIC32MX_TIMER4=n
|
||||
CONFIG_PIC32MX_TIMER5=n
|
||||
CONFIG_PIC32MX_IC1=n
|
||||
CONFIG_PIC32MX_IC2=n
|
||||
CONFIG_PIC32MX_IC3=n
|
||||
CONFIG_PIC32MX_IC4=n
|
||||
CONFIG_PIC32MX_IC5=n
|
||||
CONFIG_PIC32MX_OC1=n
|
||||
CONFIG_PIC32MX_OC2=n
|
||||
CONFIG_PIC32MX_OC3=n
|
||||
CONFIG_PIC32MX_OC4=n
|
||||
CONFIG_PIC32MX_OC5=n
|
||||
CONFIG_PIC32MX_I2C1=n
|
||||
CONFIG_PIC32MX_I2C2=n
|
||||
CONFIG_PIC32MX_SPI2=n
|
||||
CONFIG_PIC32MX_UART1=n
|
||||
CONFIG_PIC32MX_UART2=y
|
||||
CONFIG_PIC32MX_PMP=n
|
||||
CONFIG_PIC32MX_ADC=n
|
||||
CONFIG_PIC32MX_CVR=n
|
||||
CONFIG_PIC32MX_CM1=n
|
||||
CONFIG_PIC32MX_CM2=n
|
||||
CONFIG_PIC32MX_OSC=y
|
||||
CONFIG_PIC32MX_DDP=n
|
||||
CONFIG_PIC32MX_FLASH=n
|
||||
CONFIG_PIC32MX_BMX=n
|
||||
CONFIG_PIC32MX_DMA=n
|
||||
CONFIG_PIC32MX_CHE=n
|
||||
CONFIG_PIC32MX_USBDEV=n
|
||||
CONFIG_PIC32MX_USBHOST=n
|
||||
CONFIG_PIC32MX_IOPORTA=y
|
||||
CONFIG_PIC32MX_IOPORTB=y
|
||||
CONFIG_PIC32MX_IOPORTC=y
|
||||
CONFIG_PIC32MX_IOPORTD=y
|
||||
CONFIG_PIC32MX_IOPORTE=y
|
||||
CONFIG_PIC32MX_IOPORTF=y
|
||||
CONFIG_PIC32MX_IOPORTG=y
|
||||
|
||||
#
|
||||
# PIC32MX Configuration Settings
|
||||
#
|
||||
# DEVCFG0:
|
||||
# CONFIG_PIC32MX_DEBUGGER - Background Debugger Enable. Default 3 (disabled). The
|
||||
# value 2 enables.
|
||||
# CONFIG_PIC32MX_ICESEL - In-Circuit Emulator/Debugger Communication Channel Select
|
||||
# Default 1 (PG2)
|
||||
# CONFIG_PIC32MX_PROGFLASHWP - Program FLASH write protect. Default 0xff (disabled)
|
||||
# CONFIG_PIC32MX_BOOTFLASHWP - Default 1 (disabled)
|
||||
# CONFIG_PIC32MX_CODEWP - Default 1 (disabled)
|
||||
# DEVCFG1: (All settings determined by selections in board.h)
|
||||
# DEVCFG2: (All settings determined by selections in board.h)
|
||||
# DEVCFG3:
|
||||
# CONFIG_PIC32MX_USBIDO - USB USBID Selection. Default 1 if USB enabled
|
||||
# (USBID pin is controlled by the USB module), but 0 (GPIO) otherwise.
|
||||
# CONFIG_PIC32MX_VBUSIO - USB VBUSON Selection (Default 1 if USB enabled
|
||||
# (VBUSON pin is controlled by the USB module, but 0 (GPIO) otherwise.
|
||||
# CONFIG_PIC32MX_WDENABLE - Enabled watchdog on power up. Default 0 (watchdog
|
||||
# can be enabled later by software).
|
||||
#
|
||||
CONFIG_PIC32MX_DEBUGGER=2
|
||||
CONFIG_PIC32MX_ICESEL=1
|
||||
|
||||
#
|
||||
# PIC32MX specific serial device driver settings
|
||||
#
|
||||
# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
|
||||
# console and ttys0 (default is the UART1).
|
||||
# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
|
||||
# This specific the size of the receive buffer
|
||||
# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
|
||||
# being sent. This specific the size of the transmit buffer
|
||||
# CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be
|
||||
# CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8.
|
||||
# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
|
||||
# CONFIG_UARTn_2STOP - Two stop bits
|
||||
#
|
||||
CONFIG_UART1_SERIAL_CONSOLE=n
|
||||
CONFIG_UART2_SERIAL_CONSOLE=y
|
||||
|
||||
CONFIG_UART1_TXBUFSIZE=256
|
||||
CONFIG_UART2_TXBUFSIZE=256
|
||||
|
||||
CONFIG_UART1_RXBUFSIZE=256
|
||||
CONFIG_UART2_RXBUFSIZE=256
|
||||
|
||||
CONFIG_UART1_BAUD=115200
|
||||
CONFIG_UART2_BAUD=115200
|
||||
|
||||
CONFIG_UART1_BITS=8
|
||||
CONFIG_UART2_BITS=8
|
||||
|
||||
CONFIG_UART1_PARITY=0
|
||||
CONFIG_UART2_PARITY=0
|
||||
|
||||
CONFIG_UART1_2STOP=0
|
||||
CONFIG_UART2_2STOP=0
|
||||
|
||||
#
|
||||
# General build options
|
||||
#
|
||||
# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
|
||||
# BSPs from www.ridgerun.com using the tools/mkimage.sh script
|
||||
# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
|
||||
# used with many different loaders using the GNU objcopy program
|
||||
# Should not be selected if you are not using the GNU toolchain.
|
||||
# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format
|
||||
# used with many different loaders using the GNU objcopy program
|
||||
# Should not be selected if you are not using the GNU toolchain.
|
||||
# CONFIG_RAW_BINARY - make a raw binary format file used with many
|
||||
# different loaders using the GNU objcopy program. This option
|
||||
# should not be selected if you are not using the GNU toolchain.
|
||||
# CONFIG_HAVE_LIBM - toolchain supports libm.a
|
||||
#
|
||||
CONFIG_RRLOAD_BINARY=n
|
||||
CONFIG_INTELHEX_BINARY=y
|
||||
CONFIG_MOTOROLA_SREC=n
|
||||
CONFIG_RAW_BINARY=n
|
||||
CONFIG_HAVE_LIBM=n
|
||||
|
||||
#
|
||||
# General OS setup
|
||||
#
|
||||
# CONFIG_APPS_DIR - Identifies the relative path to the directory
|
||||
# that builds the application to link with NuttX. Default: ../apps
|
||||
# CONFIG_DEBUG - enables built-in debug options
|
||||
# CONFIG_DEBUG_VERBOSE - enables verbose debug output
|
||||
# CONFIG_DEBUG_SYMBOLS - build without optimization and with
|
||||
# debug symbols (needed for use with a debugger).
|
||||
# CONFIG_HAVE_CXX - Enable support for C++
|
||||
# CONFIG_MM_REGIONS - If the architecture includes multiple
|
||||
# regions of memory to allocate from, this specifies the
|
||||
# number of memory regions that the memory manager must
|
||||
# handle and enables the API mm_addregion(start, end);
|
||||
# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
|
||||
# time console output
|
||||
# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
|
||||
# or MSEC_PER_TICK=10. This setting may be defined to
|
||||
# inform NuttX that the processor hardware is providing
|
||||
# system timer interrupts at some interrupt interval other
|
||||
# than 10 msec.
|
||||
# CONFIG_RR_INTERVAL - The round robin timeslice will be set
|
||||
# this number of milliseconds; Round robin scheduling can
|
||||
# be disabled by setting this value to zero.
|
||||
# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in
|
||||
# scheduler to monitor system performance
|
||||
# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
|
||||
# task name to save in the TCB. Useful if scheduler
|
||||
# instrumentation is selected. Set to zero to disable.
|
||||
# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
|
||||
# Used to initialize the internal time logic.
|
||||
# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions.
|
||||
# You would only need this if you are concerned about accurate
|
||||
# time conversions in the past or in the distant future.
|
||||
# CONFIG_JULIAN_TIME - Enables Julian time conversions. You
|
||||
# would only need this if you are concerned about accurate
|
||||
# time conversion in the distand past. You must also define
|
||||
# CONFIG_GREGORIAN_TIME in order to use Julian time.
|
||||
# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
|
||||
# provides /dev/console. Enables stdout, stderr, stdin.
|
||||
# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
|
||||
# driver (minimul support)
|
||||
# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
|
||||
# errorcheck mutexes. Enables pthread_mutexattr_settype().
|
||||
# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
|
||||
# inheritance on mutexes and semaphores.
|
||||
# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
|
||||
# inheritance is enabled. It defines the maximum number of
|
||||
# different threads (minus one) that can take counts on a
|
||||
# semaphore with priority inheritance support. This may be
|
||||
# set to zero if priority inheritance is disabled OR if you
|
||||
# are only using semaphores as mutexes (only one holder) OR
|
||||
# if no more than two threads participate using a counting
|
||||
# semaphore.
|
||||
# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled,
|
||||
# then this setting is the maximum number of higher priority
|
||||
# threads (minus 1) than can be waiting for another thread
|
||||
# to release a count on a semaphore. This value may be set
|
||||
# to zero if no more than one thread is expected to wait for
|
||||
# a semaphore.
|
||||
# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
|
||||
# by task_create() when a new task is started. If set, all
|
||||
# files/drivers will appear to be closed in the new task.
|
||||
# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
|
||||
# three file descriptors (stdin, stdout, stderr) by task_create()
|
||||
# when a new task is started. If set, all files/drivers will
|
||||
# appear to be closed in the new task except for stdin, stdout,
|
||||
# and stderr.
|
||||
# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
|
||||
# desciptors by task_create() when a new task is started. If
|
||||
# set, all sockets will appear to be closed in the new task.
|
||||
# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to
|
||||
# handle delayed processing from interrupt handlers. This feature
|
||||
# is required for some drivers but, if there are not complaints,
|
||||
# can be safely disabled. The worker thread also performs
|
||||
# garbage collection -- completing any delayed memory deallocations
|
||||
# from interrupt handlers. If the worker thread is disabled,
|
||||
# then that clean will be performed by the IDLE thread instead
|
||||
# (which runs at the lowest of priority and may not be appropriate
|
||||
# if memory reclamation is of high priority). If CONFIG_SCHED_WORKQUEUE
|
||||
# is enabled, then the following options can also be used:
|
||||
# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker
|
||||
# thread. Default: 50
|
||||
# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for
|
||||
# work in units of microseconds. Default: 50*1000 (50 MS).
|
||||
# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker
|
||||
# thread. Default: CONFIG_IDLETHREAD_STACKSIZE.
|
||||
# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up
|
||||
# the worker thread. Default: 4
|
||||
# CONFIG_SCHED_WAITPID - Enable the waitpid() API
|
||||
# CONFIG_SCHED_ATEXIT - Enabled the atexit() API
|
||||
#
|
||||
#CONFIG_APPS_DIR=
|
||||
CONFIG_DEBUG=n
|
||||
CONFIG_DEBUG_VERBOSE=n
|
||||
CONFIG_DEBUG_SYMBOLS=n
|
||||
CONFIG_DEBUG_SCHED=n
|
||||
CONFIG_HAVE_CXX=y
|
||||
CONFIG_MM_REGIONS=1
|
||||
CONFIG_ARCH_LOWPUTC=y
|
||||
CONFIG_RR_INTERVAL=0
|
||||
CONFIG_SCHED_INSTRUMENTATION=n
|
||||
CONFIG_TASK_NAME_SIZE=0
|
||||
CONFIG_START_YEAR=2011
|
||||
CONFIG_START_MONTH=12
|
||||
CONFIG_START_DAY=22
|
||||
CONFIG_GREGORIAN_TIME=n
|
||||
CONFIG_JULIAN_TIME=n
|
||||
CONFIG_DEV_CONSOLE=y
|
||||
CONFIG_DEV_LOWCONSOLE=n
|
||||
CONFIG_MUTEX_TYPES=n
|
||||
CONFIG_PRIORITY_INHERITANCE=n
|
||||
CONFIG_SEM_PREALLOCHOLDERS=0
|
||||
CONFIG_SEM_NNESTPRIO=0
|
||||
CONFIG_FDCLONE_DISABLE=n
|
||||
CONFIG_FDCLONE_STDIO=n
|
||||
CONFIG_SDCLONE_DISABLE=y
|
||||
CONFIG_SCHED_WORKQUEUE=n
|
||||
CONFIG_SCHED_WORKPRIORITY=50
|
||||
CONFIG_SCHED_WORKPERIOD=(50*1000)
|
||||
CONFIG_SCHED_WORKSTACKSIZE=1024
|
||||
CONFIG_SIG_SIGWORK=4
|
||||
CONFIG_SCHED_WAITPID=y
|
||||
CONFIG_SCHED_ATEXIT=n
|
||||
|
||||
#
|
||||
# Settings for nxflat
|
||||
# CONFIG_NXFLAT. Enable support for the NXFLAT binary format.
|
||||
# This format will support execution of NuttX binaries located
|
||||
# in a ROMFS filesystem (see examples/nxflat).
|
||||
# CONFIG_NXFLAT_DUMPBUFFER. Dump a most buffers that NXFFLAT deals
|
||||
# with. CONFIG_DEBUG, CONFIG_DEBUG_VERBOSE, and
|
||||
# CONFIG_DEBUG_BINFMT have to be defined or
|
||||
# CONFIG_NXFLAT_DUMPBUFFER does nothing.
|
||||
# CONFIG_SYMTAB_ORDEREDBYNAME. Select if the system symbol table
|
||||
# is ordered by symbol name
|
||||
#
|
||||
CONFIG_NXFLAT=n
|
||||
CONFIG_NXFLAT_DUMPBUFFER=n
|
||||
CONFIG_SYMTAB_ORDEREDBYNAME=y
|
||||
|
||||
#
|
||||
# The following can be used to disable categories of
|
||||
# APIs supported by the OS. If the compiler supports
|
||||
# weak functions, then it should not be necessary to
|
||||
# disable functions unless you want to restrict usage
|
||||
# of those APIs.
|
||||
#
|
||||
# There are certain dependency relationships in these
|
||||
# features.
|
||||
#
|
||||
# o mq_notify logic depends on signals to awaken tasks
|
||||
# waiting for queues to become full or empty.
|
||||
# o pthread_condtimedwait() depends on signals to wake
|
||||
# up waiting tasks.
|
||||
#
|
||||
CONFIG_DISABLE_CLOCK=n
|
||||
CONFIG_DISABLE_POSIX_TIMERS=n
|
||||
CONFIG_DISABLE_PTHREAD=n
|
||||
CONFIG_DISABLE_SIGNALS=n
|
||||
CONFIG_DISABLE_MQUEUE=n
|
||||
CONFIG_DISABLE_MOUNTPOINT=n
|
||||
CONFIG_DISABLE_ENVIRON=n
|
||||
CONFIG_DISABLE_POLL=y
|
||||
|
||||
#
|
||||
# Misc libc settings
|
||||
#
|
||||
# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
|
||||
# little smaller if we do not support fieldwidthes
|
||||
#
|
||||
CONFIG_NOPRINTF_FIELDWIDTH=n
|
||||
|
||||
#
|
||||
# Allow for architecture optimized implementations
|
||||
#
|
||||
# The architecture can provide optimized versions of the
|
||||
# following to improve system performance
|
||||
#
|
||||
CONFIG_ARCH_MEMCPY=n
|
||||
CONFIG_ARCH_MEMCMP=n
|
||||
CONFIG_ARCH_MEMMOVE=n
|
||||
CONFIG_ARCH_MEMSET=n
|
||||
CONFIG_ARCH_STRCMP=n
|
||||
CONFIG_ARCH_STRCPY=n
|
||||
CONFIG_ARCH_STRNCPY=n
|
||||
CONFIG_ARCH_STRLEN=n
|
||||
CONFIG_ARCH_STRNLEN=n
|
||||
CONFIG_ARCH_BZERO=n
|
||||
|
||||
#
|
||||
# Sizes of configurable things (0 disables)
|
||||
#
|
||||
# CONFIG_MAX_TASKS - The maximum number of simultaneously
|
||||
# active tasks. This value must be a power of two.
|
||||
# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
|
||||
# of parameters that a task may receive (i.e., maxmum value
|
||||
# of 'argc')
|
||||
# CONFIG_NPTHREAD_KEYS - The number of items of thread-
|
||||
# specific data that can be retained
|
||||
# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
|
||||
# descriptors (one for each open)
|
||||
# CONFIG_NFILE_STREAMS - The maximum number of streams that
|
||||
# can be fopen'ed
|
||||
# CONFIG_NAME_MAX - The maximum size of a file name.
|
||||
# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
|
||||
# on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
|
||||
# CONFIG_STDIO_LINEBUFFER - If standard C buffered I/O is enabled
|
||||
# (CONFIG_STDIO_BUFFER_SIZE > 0), then this option may be added
|
||||
# to force automatic, line-oriented flushing the output buffer
|
||||
# for putc(), fputc(), putchar(), puts(), fputs(), printf(),
|
||||
# fprintf(), and vfprintf(). When a newline is encountered in
|
||||
# the output string, the output buffer will be flushed. This
|
||||
# (slightly) increases the NuttX footprint but supports the kind
|
||||
# of behavior that people expect for printf().
|
||||
# CONFIG_NUNGET_CHARS - Number of characters that can be
|
||||
# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
|
||||
# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
|
||||
# structures. The system manages a pool of preallocated
|
||||
# message structures to minimize dynamic allocations
|
||||
# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
|
||||
# a fixed payload size given by this settin (does not include
|
||||
# other message structure overhead.
|
||||
# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
|
||||
# can be passed to a watchdog handler
|
||||
# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
|
||||
# structures. The system manages a pool of preallocated
|
||||
# watchdog structures to minimize dynamic allocations
|
||||
# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
|
||||
# timer structures. The system manages a pool of preallocated
|
||||
# timer structures to minimize dynamic allocations. Set to
|
||||
# zero for all dynamic allocations.
|
||||
#
|
||||
CONFIG_MAX_TASKS=16
|
||||
CONFIG_MAX_TASK_ARGS=4
|
||||
CONFIG_NPTHREAD_KEYS=4
|
||||
CONFIG_NFILE_DESCRIPTORS=8
|
||||
CONFIG_NFILE_STREAMS=8
|
||||
CONFIG_NAME_MAX=32
|
||||
CONFIG_STDIO_BUFFER_SIZE=64
|
||||
CONFIG_STDIO_LINEBUFFER=y
|
||||
CONFIG_NUNGET_CHARS=2
|
||||
CONFIG_PREALLOC_MQ_MSGS=4
|
||||
CONFIG_MQ_MAXMSGSIZE=32
|
||||
CONFIG_MAX_WDOGPARMS=2
|
||||
CONFIG_PREALLOC_WDOGS=4
|
||||
CONFIG_PREALLOC_TIMERS=4
|
||||
|
||||
#
|
||||
# Filesystem configuration
|
||||
#
|
||||
# CONFIG_FS_FAT - Enable FAT filesystem support
|
||||
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
||||
# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3
|
||||
# file name support.
|
||||
# CONFIG_FAT_LFN - Enable FAT long file names. NOTE: Microsoft claims
|
||||
# patents on FAT long file name technology. Please read the
|
||||
# disclaimer in the top-level COPYING file and only enable this
|
||||
# feature if you understand these issues.
|
||||
# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the
|
||||
# default, maximum long file name is 255 bytes. This can eat up
|
||||
# a lot of memory (especially stack space). If you are willing
|
||||
# to live with some non-standard, short long file names, then
|
||||
# define this value. A good choice would be the same value as
|
||||
# selected for CONFIG_NAME_MAX which will limit the visibility
|
||||
# of longer file names anyway.
|
||||
# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support.
|
||||
# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH.
|
||||
# This must have one of the values of 0xff or 0x00.
|
||||
# Default: 0xff.
|
||||
# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
|
||||
# don't both with file chunks smaller than this number of data bytes.
|
||||
# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name.
|
||||
# Default: 255.
|
||||
# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
|
||||
# don't both with file chunks smaller than this number of data bytes.
|
||||
# Default: 32.
|
||||
# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean
|
||||
# packing files together toward the end of the file or, if file are
|
||||
# deleted at the end of the file, clean up can simply mean erasing
|
||||
# the end of FLASH memory so that it can be re-used again. However,
|
||||
# doing this can also harm the life of the FLASH part because it can
|
||||
# mean that the tail end of the FLASH is re-used too often. This
|
||||
# threshold determines if/when it is worth erased the tail end of FLASH
|
||||
# and making it available for re-use (and possible over-wear).
|
||||
# Default: 8192.
|
||||
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
||||
# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this
|
||||
# option will enable a limited form of memory mapping that is
|
||||
# implemented by copying whole files into memory.
|
||||
#
|
||||
CONFIG_FS_FAT=y
|
||||
CONFIG_FAT_LCNAMES=y
|
||||
CONFIG_FAT_LFN=y
|
||||
CONFIG_FAT_MAXFNAME=32
|
||||
CONFIG_FS_NXFFS=n
|
||||
CONFIG_FS_ROMFS=n
|
||||
|
||||
#
|
||||
# SPI-based MMC/SD driver
|
||||
#
|
||||
# CONFIG_MMCSD_NSLOTS
|
||||
# Number of MMC/SD slots supported by the driver
|
||||
# CONFIG_MMCSD_READONLY
|
||||
# Provide read-only access (default is read/write)
|
||||
# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card.
|
||||
# Default is 20MHz.
|
||||
#
|
||||
CONFIG_MMCSD_NSLOTS=1
|
||||
CONFIG_MMCSD_READONLY=n
|
||||
CONFIG_MMCSD_SPICLOCK=12500000
|
||||
|
||||
#
|
||||
# Block driver buffering
|
||||
#
|
||||
# CONFIG_FS_READAHEAD
|
||||
# Enable read-ahead buffering
|
||||
# CONFIG_FS_WRITEBUFFER
|
||||
# Enable write buffering
|
||||
#
|
||||
CONFIG_FS_READAHEAD=n
|
||||
CONFIG_FS_WRITEBUFFER=n
|
||||
|
||||
#
|
||||
# SDIO-based MMC/SD driver
|
||||
#
|
||||
# CONFIG_SDIO_DMA
|
||||
# SDIO driver supports DMA
|
||||
# CONFIG_MMCSD_MMCSUPPORT
|
||||
# Enable support for MMC cards
|
||||
# CONFIG_MMCSD_HAVECARDDETECT
|
||||
# SDIO driver card detection is 100% accurate
|
||||
#
|
||||
CONFIG_SDIO_DMA=n
|
||||
CONFIG_MMCSD_MMCSUPPORT=n
|
||||
CONFIG_MMCSD_HAVECARDDETECT=n
|
||||
|
||||
#
|
||||
# TCP/IP and UDP support via uIP
|
||||
# CONFIG_NET - Enable or disable all network features
|
||||
# CONFIG_NET_IPv6 - Build in support for IPv6
|
||||
# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread.
|
||||
# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options
|
||||
# CONFIG_NET_BUFSIZE - uIP buffer size
|
||||
# CONFIG_NET_TCP - TCP support on or off
|
||||
# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks)
|
||||
# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers
|
||||
# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero)
|
||||
# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until
|
||||
# accept() is called. The size of the backlog is selected when listen() is called.
|
||||
# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks)
|
||||
# CONFIG_NET_UDP - UDP support on or off
|
||||
# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off
|
||||
# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections
|
||||
# CONFIG_NET_ICMP - ICMP ping response support on or off
|
||||
# CONFIG_NET_ICMP_PING - ICMP ping request support on or off
|
||||
# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address
|
||||
# CONFIG_NET_STATISTICS - uIP statistics on or off
|
||||
# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window
|
||||
# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table
|
||||
# CONFIG_NET_BROADCAST - Broadcast support
|
||||
# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
|
||||
#
|
||||
CONFIG_NET=n
|
||||
CONFIG_NET_IPv6=n
|
||||
CONFIG_NSOCKET_DESCRIPTORS=0
|
||||
CONFIG_NET_SOCKOPTS=y
|
||||
CONFIG_NET_BUFSIZE=420
|
||||
CONFIG_NET_TCP=n
|
||||
CONFIG_NET_TCP_CONNS=40
|
||||
CONFIG_NET_MAX_LISTENPORTS=40
|
||||
CONFIG_NET_UDP=n
|
||||
CONFIG_NET_UDP_CHECKSUMS=y
|
||||
#CONFIG_NET_UDP_CONNS=10
|
||||
CONFIG_NET_ICMP=n
|
||||
CONFIG_NET_ICMP_PING=n
|
||||
#CONFIG_NET_PINGADDRCONF=0
|
||||
CONFIG_NET_STATISTICS=y
|
||||
#CONFIG_NET_RECEIVE_WINDOW=
|
||||
#CONFIG_NET_ARPTAB_SIZE=8
|
||||
CONFIG_NET_BROADCAST=n
|
||||
#CONFIG_NET_FWCACHE_SIZE=2
|
||||
|
||||
#
|
||||
# UIP Network Utilities
|
||||
# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP
|
||||
# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries
|
||||
#
|
||||
CONFIG_NET_DHCP_LIGHT=n
|
||||
CONFIG_NET_RESOLV_ENTRIES=4
|
||||
|
||||
#
|
||||
# USB Device Configuration
|
||||
#
|
||||
# CONFIG_USBDEV
|
||||
# Enables USB device support
|
||||
# CONFIG_USBDEV_ISOCHRONOUS
|
||||
# Build in extra support for isochronous endpoints
|
||||
# CONFIG_USBDEV_DUALSPEED
|
||||
# Hardware handles high and full speed operation (USB 2.0)
|
||||
# CONFIG_USBDEV_SELFPOWERED
|
||||
# Will cause USB features to indicate that the device is
|
||||
# self-powered
|
||||
# CONFIG_USBDEV_MAXPOWER
|
||||
# Maximum power consumption in mA
|
||||
# CONFIG_USBDEV_TRACE
|
||||
# Enables USB tracing for debug
|
||||
# CONFIG_USBDEV_TRACE_NRECORDS
|
||||
# Number of trace entries to remember
|
||||
#
|
||||
CONFIG_USBDEV=n
|
||||
CONFIG_USBDEV_ISOCHRONOUS=n
|
||||
CONFIG_USBDEV_DUALSPEED=n
|
||||
CONFIG_USBDEV_SELFPOWERED=y
|
||||
CONFIG_USBDEV_REMOTEWAKEUP=n
|
||||
CONFIG_USBDEV_MAXPOWER=100
|
||||
CONFIG_USBDEV_TRACE=n
|
||||
CONFIG_USBDEV_TRACE_NRECORDS=128
|
||||
|
||||
#
|
||||
# USB Serial Device Configuration
|
||||
#
|
||||
# CONFIG_USBSER
|
||||
# Enable compilation of the USB serial driver
|
||||
# CONFIG_USBSER_EPINTIN
|
||||
# The logical 7-bit address of a hardware endpoint that supports
|
||||
# interrupt IN operation
|
||||
# CONFIG_USBSER_EPBULKOUT
|
||||
# The logical 7-bit address of a hardware endpoint that supports
|
||||
# bulk OUT operation
|
||||
# CONFIG_USBSER_EPBULKIN
|
||||
# The logical 7-bit address of a hardware endpoint that supports
|
||||
# bulk IN operation
|
||||
# # CONFIG_USBSER_NWRREQS and CONFIG_USBSER_NRDREQS
|
||||
# The number of write/read requests that can be in flight
|
||||
# CONFIG_USBSER_VENDORID and CONFIG_USBSER_VENDORSTR
|
||||
# The vendor ID code/string
|
||||
# CONFIG_USBSER_PRODUCTID and CONFIG_USBSER_PRODUCTSTR
|
||||
# The product ID code/string
|
||||
# CONFIG_USBSER_RXBUFSIZE and CONFIG_USBSER_TXBUFSIZE
|
||||
# Size of the serial receive/transmit buffers
|
||||
#
|
||||
CONFIG_USBSER=n
|
||||
CONFIG_USBSER_EPINTIN=1
|
||||
CONFIG_USBSER_EPBULKOUT=2
|
||||
CONFIG_USBSER_EPBULKIN=5
|
||||
CONFIG_USBSER_NWRREQS=4
|
||||
CONFIG_USBSER_NRDREQS=4
|
||||
CONFIG_USBSER_VENDORID=0x067b
|
||||
CONFIG_USBSER_PRODUCTID=0x2303
|
||||
CONFIG_USBSER_VENDORSTR="Nuttx"
|
||||
CONFIG_USBSER_PRODUCTSTR="USBdev Serial"
|
||||
CONFIG_USBSER_RXBUFSIZE=512
|
||||
CONFIG_USBSER_TXBUFSIZE=512
|
||||
|
||||
#
|
||||
# USB Storage Device Configuration
|
||||
#
|
||||
# CONFIG_USBSTRG
|
||||
# Enable compilation of the USB storage driver
|
||||
# CONFIG_USBSTRG_EP0MAXPACKET
|
||||
# Max packet size for endpoint 0
|
||||
# CONFIG_USBSTRG_EPBULKOUT and CONFIG_USBSTRG_EPBULKIN
|
||||
# The logical 7-bit address of a hardware endpoints that support
|
||||
# bulk OUT and IN operations
|
||||
# CONFIG_USBSTRG_NWRREQS and CONFIG_USBSTRG_NRDREQS
|
||||
# The number of write/read requests that can be in flight
|
||||
# CONFIG_USBSTRG_BULKINREQLEN and CONFIG_USBSTRG_BULKOUTREQLEN
|
||||
# The size of the buffer in each write/read request. This
|
||||
# value needs to be at least as large as the endpoint
|
||||
# maxpacket and ideally as large as a block device sector.
|
||||
# CONFIG_USBSTRG_VENDORID and CONFIG_USBSTRG_VENDORSTR
|
||||
# The vendor ID code/string
|
||||
# CONFIG_USBSTRG_PRODUCTID and CONFIG_USBSTRG_PRODUCTSTR
|
||||
# The product ID code/string
|
||||
# CONFIG_USBSTRG_REMOVABLE
|
||||
# Select if the media is removable
|
||||
#
|
||||
CONFIG_USBSTRG=n
|
||||
CONFIG_USBSTRG_EP0MAXPACKET=64
|
||||
CONFIG_USBSTRG_EPBULKOUT=2
|
||||
CONFIG_USBSTRG_EPBULKIN=5
|
||||
CONFIG_USBSTRG_NRDREQS=2
|
||||
CONFIG_USBSTRG_NWRREQS=2
|
||||
CONFIG_USBSTRG_BULKINREQLEN=256
|
||||
CONFIG_USBSTRG_BULKOUTREQLEN=256
|
||||
CONFIG_USBSTRG_VENDORID=0x584e
|
||||
CONFIG_USBSTRG_VENDORSTR="NuttX"
|
||||
CONFIG_USBSTRG_PRODUCTID=0x5342
|
||||
CONFIG_USBSTRG_PRODUCTSTR="USBdev Storage"
|
||||
CONFIG_USBSTRG_VERSIONNO=0x0399
|
||||
CONFIG_USBSTRG_REMOVABLE=y
|
||||
|
||||
#
|
||||
# Settings for examples/uip
|
||||
#
|
||||
CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2)
|
||||
CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1)
|
||||
CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0)
|
||||
CONFIG_EXAMPLE_UIP_DHCPC=n
|
||||
|
||||
#
|
||||
# Settings for examples/nettest
|
||||
#
|
||||
# CONFIG_EXAMPLE_NETTEST_SERVER - The target board can act
|
||||
# as either the client side or server side of the test
|
||||
# CONFIG_EXAMPLE_NETTEST_PERFORMANCE - If set, then the
|
||||
# client side simply receives messages forever, allowing
|
||||
# measurement of throughput
|
||||
# CONFIG_EXAMPLE_NETTEST_NOMAC - Set if the hardware has
|
||||
# no MAC address; one will be assigned
|
||||
# CONFIG_EXAMPLE_NETTEST_IPADDR - Target board IP address
|
||||
# CONFIG_EXAMPLE_NETTEST_DRIPADDR - Default router address
|
||||
# CONFIG_EXAMPLE_NETTEST_NETMASK - Network mask
|
||||
# CONFIG_EXAMPLE_NETTEST_CLIENTIP - IP address of the
|
||||
# client side of the test (may be target or host)
|
||||
#
|
||||
CONFIG_EXAMPLE_NETTEST_SERVER=n
|
||||
CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
|
||||
CONFIG_EXAMPLE_NETTEST_NOMAC=y
|
||||
CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2)
|
||||
CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1)
|
||||
CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0)
|
||||
CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1)
|
||||
|
||||
#
|
||||
# Settings for examples/ostest
|
||||
#
|
||||
CONFIG_EXAMPLES_OSTEST_LOOPS=1
|
||||
CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
|
||||
CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
|
||||
|
||||
#
|
||||
# Settings for apps/nshlib
|
||||
#
|
||||
# CONFIG_NSH_BUILTIN_APPS - Support external registered,
|
||||
# "named" applications that can be executed from the NSH
|
||||
# command line (see apps/README.txt for more information).
|
||||
# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer
|
||||
# CONFIG_NSH_STRERROR - Use strerror(errno)
|
||||
# CONFIG_NSH_LINELEN - Maximum length of one command line
|
||||
# CONFIG_NSH_STACKSIZE - Stack size to use for new threads.
|
||||
# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
|
||||
# CONFIG_NSH_DISABLESCRIPT - Disable scripting support
|
||||
# CONFIG_NSH_DISABLEBG - Disable background commands
|
||||
# CONFIG_NSH_ROMFSETC - Use startup script in /etc
|
||||
# CONFIG_NSH_CONSOLE - Use serial console front end
|
||||
# CONFIG_NSH_TELNET - Use telnetd console front end
|
||||
# CONFIG_NSH_ARCHINIT - Platform provides architecture
|
||||
# specific initialization (nsh_archinitialize()).
|
||||
#
|
||||
# If CONFIG_NSH_TELNET is selected:
|
||||
# CONFIG_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size
|
||||
# CONFIG_NSH_DHCPC - Obtain address using DHCP
|
||||
# CONFIG_NSH_IPADDR - Provides static IP address
|
||||
# CONFIG_NSH_DRIPADDR - Provides static router IP address
|
||||
# CONFIG_NSH_NETMASK - Provides static network mask
|
||||
# CONFIG_NSH_NOMAC - Use a bogus MAC address
|
||||
#
|
||||
# If CONFIG_NSH_ROMFSETC is selected:
|
||||
# CONFIG_NSH_ROMFSMOUNTPT - ROMFS mountpoint
|
||||
# CONFIG_NSH_INITSCRIPT - Relative path to init script
|
||||
# CONFIG_NSH_ROMFSDEVNO - ROMFS RAM device minor
|
||||
# CONFIG_NSH_ROMFSSECTSIZE - ROMF sector size
|
||||
# CONFIG_NSH_FATDEVNO - FAT FS RAM device minor
|
||||
# CONFIG_NSH_FATSECTSIZE - FAT FS sector size
|
||||
# CONFIG_NSH_FATNSECTORS - FAT FS number of sectors
|
||||
# CONFIG_NSH_FATMOUNTPT - FAT FS mountpoint
|
||||
#
|
||||
CONFIG_NSH_BUILTIN_APPS=y
|
||||
CONFIG_NSH_FILEIOSIZE=512
|
||||
CONFIG_NSH_STRERROR=n
|
||||
CONFIG_NSH_LINELEN=64
|
||||
CONFIG_NSH_STACKSIZE=2048
|
||||
CONFIG_NSH_NESTDEPTH=3
|
||||
CONFIG_NSH_DISABLESCRIPT=n
|
||||
CONFIG_NSH_DISABLEBG=n
|
||||
CONFIG_NSH_ROMFSETC=n
|
||||
CONFIG_NSH_CONSOLE=y
|
||||
CONFIG_NSH_TELNET=n
|
||||
CONFIG_NSH_ARCHINIT=n
|
||||
CONFIG_NSH_IOBUFFER_SIZE=512
|
||||
CONFIG_NSH_DHCPC=n
|
||||
CONFIG_NSH_NOMAC=n
|
||||
CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
|
||||
CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
|
||||
CONFIG_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
|
||||
CONFIG_NSH_ROMFSMOUNTPT="/etc"
|
||||
CONFIG_NSH_INITSCRIPT="init.d/rcS"
|
||||
CONFIG_NSH_ROMFSDEVNO=0
|
||||
CONFIG_NSH_ROMFSSECTSIZE=64
|
||||
CONFIG_NSH_FATDEVNO=1
|
||||
CONFIG_NSH_FATSECTSIZE=512
|
||||
CONFIG_NSH_FATNSECTORS=1024
|
||||
CONFIG_NSH_FATMOUNTPT=/tmp
|
||||
|
||||
#
|
||||
# Architecture-specific NSH options
|
||||
#
|
||||
CONFIG_NSH_MMCSDSPIPORTNO=1
|
||||
CONFIG_NSH_MMCSDSLOTNO=0
|
||||
CONFIG_NSH_MMCSDMINOR=0
|
||||
|
||||
#
|
||||
# Settings for examples/usbserial
|
||||
#
|
||||
# CONFIG_EXAMPLES_USBSERIAL_INONLY
|
||||
# Only verify IN (device-to-host) data transfers. Default: both
|
||||
# CONFIG_EXAMPLES_USBSERIAL_OUTONLY
|
||||
# Only verify OUT (host-to-device) data transfers. Default: both
|
||||
# CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL
|
||||
# Send only small, single packet messages. Default: Send large and small.
|
||||
# CONFIG_EXAMPLES_USBSERIAL_ONLYBIG
|
||||
# Send only large, multi-packet messages. Default: Send large and small.
|
||||
#
|
||||
CONFIG_EXAMPLES_USBSERIAL_INONLY=n
|
||||
CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
|
||||
CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
|
||||
CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
|
||||
|
||||
CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
|
||||
CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
|
||||
CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
|
||||
CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
|
||||
CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
|
||||
|
||||
#
|
||||
# Settings for examples/usbstorage
|
||||
#
|
||||
# CONFIG_EXAMPLES_USBSTRG_NLUNS
|
||||
# Defines the number of logical units (LUNs) exported by the USB storage
|
||||
# driver. Each LUN corresponds to one exported block driver (or partition
|
||||
# of a block driver). May be 1, 2, or 3. Default is 1.
|
||||
# CONFIG_EXAMPLES_USBSTRG_DEVMINOR1
|
||||
# The minor device number of the block driver for the first LUN. For
|
||||
# example, N in /dev/mmcsdN. Used for registering the block driver. Default
|
||||
# is zero.
|
||||
# CONFIG_EXAMPLES_USBSTRG_DEVPATH1
|
||||
# The full path to the registered block driver. Default is "/dev/mmcsd0"
|
||||
# CONFIG_EXAMPLES_USBSTRG_DEVMINOR2 and CONFIG_EXAMPLES_USBSTRG_DEVPATH2
|
||||
# Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBSTRG_NLUNS
|
||||
# is 2 or 3. No defaults.
|
||||
# CONFIG_EXAMPLES_USBSTRG_DEVMINOR3 and CONFIG_EXAMPLES_USBSTRG_DEVPATH3
|
||||
# Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBSTRG_NLUNS
|
||||
# is 3. No defaults.
|
||||
#
|
||||
# If CONFIG_USBDEV_TRACE is enabled (or CONFIG_DEBUG and CONFIG_DEBUG_USB), then
|
||||
# the example code will also manage the USB trace output. The amount of trace output
|
||||
# can be controlled using:
|
||||
#
|
||||
# CONFIG_EXAMPLES_USBSTRG_TRACEINIT
|
||||
# Show initialization events
|
||||
# CONFIG_EXAMPLES_USBSTRG_TRACECLASS
|
||||
# Show class driver events
|
||||
# CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS
|
||||
# Show data transfer events
|
||||
# CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER
|
||||
# Show controller events
|
||||
# CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS
|
||||
# Show interrupt-related events.
|
||||
#
|
||||
CONFIG_EXAMPLES_USBSTRG_NLUNS=1
|
||||
CONFIG_EXAMPLES_USBSTRG_DEVMINOR1=0
|
||||
CONFIG_EXAMPLES_USBSTRG_DEVPATH1="/dev/mmcsd0"
|
||||
CONFIG_EXAMPLES_USBSTRG_TRACEINIT=n
|
||||
CONFIG_EXAMPLES_USBSTRG_TRACECLASS=n
|
||||
CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS=n
|
||||
CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER=n
|
||||
CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS=n
|
||||
|
||||
#
|
||||
# Stack and heap information
|
||||
#
|
||||
# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP
|
||||
# operation from FLASH but must copy initialized .data sections to RAM.
|
||||
# (should also be =n for the PIC32MX which always runs from flash)
|
||||
# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH
|
||||
# but copy themselves entirely into RAM for better performance.
|
||||
# CONFIG_CUSTOM_STACK - The up_ implementation will handle
|
||||
# all stack operations outside of the nuttx model.
|
||||
# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
|
||||
# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
|
||||
# This is the thread that (1) performs the inital boot of the system up
|
||||
# to the point where user_start() is spawned, and (2) there after is the
|
||||
# IDLE thread that executes only when there is no other thread ready to
|
||||
# run.
|
||||
# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
|
||||
# for the main user thread that begins at the user_start() entry point.
|
||||
# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
|
||||
# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
|
||||
# CONFIG_HEAP_BASE - The beginning of the heap
|
||||
# CONFIG_HEAP_SIZE - The size of the heap
|
||||
#
|
||||
CONFIG_BOOT_RUNFROMFLASH=n
|
||||
CONFIG_BOOT_COPYTORAM=n
|
||||
CONFIG_CUSTOM_STACK=n
|
||||
CONFIG_STACK_POINTER=
|
||||
CONFIG_IDLETHREAD_STACKSIZE=2048
|
||||
CONFIG_USERMAIN_STACKSIZE=2048
|
||||
CONFIG_PTHREAD_STACK_MIN=256
|
||||
CONFIG_PTHREAD_STACK_DEFAULT=2048
|
||||
CONFIG_HEAP_BASE=
|
||||
CONFIG_HEAP_SIZE=
|
||||
|
|
@ -0,0 +1,317 @@
|
|||
/****************************************************************************
|
||||
* configs/sure-pic32mx/nsh/ld.script
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
/* Memory Regions ***********************************************************/
|
||||
|
||||
MEMORY
|
||||
{
|
||||
/* The PIC32MX440F512H has 512Kb of program FLASH at physical address
|
||||
* 0x1d000000 but is always accessed at KSEG0 address 0x9d00:0000
|
||||
*/
|
||||
|
||||
kseg0_progmem (rx) : ORIGIN = 0x9d000000, LENGTH = 512K
|
||||
|
||||
/* The PIC32MX440F512H has 12Kb of boot FLASH at physical address
|
||||
* 0x1fc00000. The initial reset vector is in KSEG1, but all other
|
||||
* accesses are in KSEG0.
|
||||
*
|
||||
* REGION PHYSICAL KSEG SIZE
|
||||
* DESCRIPTION START ADDR (BYTES)
|
||||
* ------------- ---------- ------ ----------------------
|
||||
* Exceptions:*
|
||||
* Reset 0x1fc00000 KSEG1 512 512
|
||||
* TLB Refill 0x1fc00200 KSEG1 256 768
|
||||
* Cache Error 0x1fc00300 KSEG1 128 896
|
||||
* Others 0x1fc00380 KSEG1 128 1024 (1Kb)
|
||||
* Interrupt 0x1fc00400 KSEG1 128 1152
|
||||
* JTAG 0x1fc00480 KSEG1 16 1168
|
||||
* Exceptions 0x1fc00490 KSEG0 8192-1168 8192 (4Kb)
|
||||
* Debug code 0x1fc02000 KSEG1 4096-16 12272
|
||||
* DEVCFG3-0 0x1fc02ff0 KSEG1 16 12288 (12Kb)
|
||||
*
|
||||
* Exceptions assume:
|
||||
*
|
||||
* STATUS: BEV=0/1 and EXL=0
|
||||
* CAUSE: IV=1
|
||||
* JTAG: ProbEn=0
|
||||
* And multi-vector support disabled
|
||||
*/
|
||||
|
||||
kseg1_reset (rx) : ORIGIN = 0xbfc00000, LENGTH = 384
|
||||
kseg1_genexcpt (rx) : ORIGIN = 0xbfc00180, LENGTH = 128
|
||||
kseg1_ebexcpt (rx) : ORIGIN = 0xbfc00200, LENGTH = 128
|
||||
kseg1_bevexcpt (rx) : ORIGIN = 0xbfc00380, LENGTH = 128
|
||||
kseg1_intexcpt (rx) : ORIGIN = 0xbfc00400, LENGTH = 128
|
||||
kseg1_dbgexcpt (rx) : ORIGIN = 0xbfc00480, LENGTH = 16
|
||||
kseg0_bootmem (rx) : ORIGIN = 0x9fc00490, LENGTH = 8192-1168
|
||||
kseg1_dbgcode (rx) : ORIGIN = 0xbfc02000, LENGTH = 4096-16
|
||||
kseg1_devcfg (r) : ORIGIN = 0xbfc02ff0, LENGTH = 16
|
||||
|
||||
/* The PIC32MX440F512H has 32Kb of data memory at physical address
|
||||
* 0x00000000. Since the PIC32MX has no data cache, this memory is
|
||||
* always accessed through KSEG1.
|
||||
*
|
||||
* When used with MPLAB, we need to set aside 512 bytes of memory
|
||||
* for use by MPLAB.
|
||||
*/
|
||||
|
||||
kseg1_datamem (w!x) : ORIGIN = 0xa0000200, LENGTH = 32K - 512
|
||||
}
|
||||
|
||||
OUTPUT_FORMAT("elf32-tradlittlemips")
|
||||
OUTPUT_ARCH(pic32mx)
|
||||
ENTRY(__start)
|
||||
|
||||
SECTIONS
|
||||
{
|
||||
/* Boot FLASH sections */
|
||||
|
||||
.reset :
|
||||
{
|
||||
KEEP (*(.reset))
|
||||
} > kseg1_reset
|
||||
|
||||
/* Exception handlers. The following is assumed:
|
||||
*
|
||||
* STATUS: BEV=1 and EXL=0
|
||||
* CAUSE: IV=1
|
||||
* JTAG: ProbEn=0
|
||||
* And multi-vector support disabled
|
||||
*
|
||||
* In that configuration, the vector locations become:
|
||||
*
|
||||
* Reset, Soft Reset bfc0:0000
|
||||
* TLB Refill bfc0:0200
|
||||
* Cache Error bfc0:0300
|
||||
* All others bfc0:0380
|
||||
* Interrupt bfc0:0400
|
||||
* EJTAG Debug bfc0:0480
|
||||
*/
|
||||
|
||||
/* KSEG1 exception handler "trampolines" */
|
||||
|
||||
.gen_excpt :
|
||||
{
|
||||
KEEP (*(.gen_excpt))
|
||||
} > kseg1_genexcpt
|
||||
|
||||
.ebase_excpt :
|
||||
{
|
||||
KEEP (*(.ebase_excpt))
|
||||
} > kseg1_ebexcpt
|
||||
|
||||
.bev_excpt :
|
||||
{
|
||||
KEEP (*(.bev_excpt))
|
||||
} > kseg1_bevexcpt
|
||||
|
||||
.int_excpt :
|
||||
{
|
||||
KEEP (*(.int_excpt))
|
||||
} > kseg1_intexcpt
|
||||
|
||||
.dbg_excpt = ORIGIN(kseg1_dbgexcpt);
|
||||
|
||||
.start :
|
||||
{
|
||||
/* KSEG0 Reset startup logic */
|
||||
|
||||
*(.start)
|
||||
|
||||
/* KSEG0 exception handlers */
|
||||
|
||||
*(.nmi_handler)
|
||||
*(.bev_handler)
|
||||
*(.int_handler)
|
||||
} > kseg0_bootmem
|
||||
|
||||
.dbg_code = ORIGIN(kseg1_dbgcode);
|
||||
|
||||
.devcfg :
|
||||
{
|
||||
KEEP (*(.devcfg))
|
||||
} > kseg1_devcfg
|
||||
|
||||
/* Program FLASH sections */
|
||||
|
||||
.text :
|
||||
{
|
||||
_stext = ABSOLUTE(.);
|
||||
*(.text .text.*)
|
||||
*(.stub)
|
||||
KEEP (*(.text.*personality*))
|
||||
*(.gnu.linkonce.t.*)
|
||||
*(.gnu.warning)
|
||||
*(.mips16.fn.*)
|
||||
*(.mips16.call.*)
|
||||
|
||||
/* Read-only data is included in the text section */
|
||||
|
||||
*(.rodata .rodata.*)
|
||||
*(.rodata1)
|
||||
*(.gnu.linkonce.r.*)
|
||||
|
||||
/* Small initialized constant global and static data */
|
||||
|
||||
*(.sdata2 .sdata2.*)
|
||||
*(.gnu.linkonce.s2.*)
|
||||
|
||||
/* Uninitialized constant global and static data */
|
||||
|
||||
*(.sbss2 .sbss2.*)
|
||||
*(.gnu.linkonce.sb2.*)
|
||||
_etext = ABSOLUTE(.);
|
||||
} > kseg0_progmem
|
||||
|
||||
/* Initialization data begins here in progmem */
|
||||
|
||||
_data_loaddr = LOADADDR(.data);
|
||||
|
||||
.eh_frame_hdr : { *(.eh_frame_hdr) }
|
||||
.eh_frame : ONLY_IF_RO { KEEP (*(.eh_frame)) }
|
||||
|
||||
/* RAM functions are positioned at the beginning of RAM so that
|
||||
* they can be guaranteed to satisfy the 2Kb alignment requirement.
|
||||
*/
|
||||
|
||||
/* This causes failures if there are no RAM functions
|
||||
.ramfunc ALIGN(2K) :
|
||||
{
|
||||
_sramfunc = ABSOLUTE(.);
|
||||
*(.ramfunc .ramfunc.*)
|
||||
_eramfunc = ABSOLUTE(.);
|
||||
} > kseg1_datamem AT > kseg0_progmem
|
||||
|
||||
_ramfunc_loadaddr = LOADADDR(.ramfunc);
|
||||
_ramfunc_sizeof = SIZEOF(.ramfunc);
|
||||
_bmxdkpba_address = _sramfunc - ORIGIN(kseg1_datamem) ;
|
||||
_bmxdudba_address = LENGTH(kseg1_datamem) ;
|
||||
_bmxdupba_address = LENGTH(kseg1_datamem) ;
|
||||
*/
|
||||
|
||||
.data :
|
||||
{
|
||||
_sdata = ABSOLUTE(.);
|
||||
*(.data .data.*)
|
||||
*(.gnu.linkonce.d.*)
|
||||
KEEP (*(.gnu.linkonce.d.*personality*))
|
||||
*(.data1)
|
||||
} > kseg1_datamem AT > kseg0_progmem
|
||||
|
||||
.eh_frame : ONLY_IF_RW { KEEP (*(.eh_frame)) }
|
||||
_gp = ALIGN(16) + 0x7FF0 ;
|
||||
|
||||
.got :
|
||||
{
|
||||
*(.got.plt) *(.got)
|
||||
} > kseg1_datamem AT > kseg0_progmem
|
||||
|
||||
.sdata :
|
||||
{
|
||||
*(.sdata .sdata.* .gnu.linkonce.s.*)
|
||||
} > kseg1_datamem AT > kseg0_progmem
|
||||
|
||||
.lit8 :
|
||||
{
|
||||
*(.lit8)
|
||||
} > kseg1_datamem AT > kseg0_progmem
|
||||
|
||||
.lit4 :
|
||||
{
|
||||
*(.lit4)
|
||||
_edata = ABSOLUTE(.);
|
||||
} >kseg1_datamem AT>kseg0_progmem
|
||||
|
||||
.sbss :
|
||||
{
|
||||
_sbss = ABSOLUTE(.);
|
||||
*(.dynsbss)
|
||||
*(.sbss .sbss.* .gnu.linkonce.sb.*)
|
||||
*(.scommon)
|
||||
} >kseg1_datamem
|
||||
|
||||
.bss :
|
||||
{
|
||||
*(.dynbss)
|
||||
*(.bss .bss.*)
|
||||
*(.gnu.linkonce.b.*)
|
||||
*(COMMON)
|
||||
_ebss = ABSOLUTE(.);
|
||||
} > kseg1_datamem
|
||||
|
||||
/* Stabs debugging sections */
|
||||
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
|
||||
/* DWARF debug sections */
|
||||
/* DWARF 1 */
|
||||
|
||||
.debug 0 : { *(.debug) }
|
||||
.line 0 : { *(.line) }
|
||||
|
||||
/* GNU DWARF 1 extensions */
|
||||
|
||||
.debug_srcinfo 0 : { *(.debug_srcinfo) }
|
||||
.debug_sfnames 0 : { *(.debug_sfnames) }
|
||||
|
||||
/* DWARF 1.1 and DWARF 2 */
|
||||
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
|
||||
/* DWARF 2 */
|
||||
|
||||
.debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_frame 0 : { *(.debug_frame) }
|
||||
.debug_str 0 : { *(.debug_str) }
|
||||
.debug_loc 0 : { *(.debug_loc) }
|
||||
.debug_macinfo 0 : { *(.debug_macinfo) }
|
||||
|
||||
/* SGI/MIPS DWARF 2 extensions */
|
||||
|
||||
.debug_weaknames 0 : { *(.debug_weaknames) }
|
||||
.debug_funcnames 0 : { *(.debug_funcnames) }
|
||||
.debug_typenames 0 : { *(.debug_typenames) }
|
||||
.debug_varnames 0 : { *(.debug_varnames) }
|
||||
|
||||
/DISCARD/ : { *(.note.GNU-stack) }
|
||||
}
|
||||
|
|
@ -0,0 +1,61 @@
|
|||
#!/bin/bash
|
||||
# configs/sure-pic32mx/nsh/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$_" = "$0" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
|
||||
|
||||
WD=`pwd`
|
||||
if [ ! -x "setenv.sh" ]; then
|
||||
echo "This script must be executed from the top-level NuttX build directory"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
# This the Cygwin path to the location where I installed the MicroChip
|
||||
# PIC32MX toolchain under windows. This is *not* the default install
|
||||
# location so you will probably have to edit this. You will also have
|
||||
# to edit this if you install a different version of if you install
|
||||
# the Linux PIC32MX toolchain as well
|
||||
export TOOLCHAIN_BIN="/cygdrive/c/MicroChip/mplabc32/v1.12/bin"
|
||||
|
||||
# This is the path to the toosl subdirectory
|
||||
export PIC32TOOL_DIR="${WD}/configs/sure-pic32mx/tools"
|
||||
|
||||
# Add the path to the toolchain to the PATH varialble
|
||||
export PATH="${TOOLCHAIN_BIN}:${PIC32TOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
|
|
@ -8,7 +8,7 @@
|
|||
* Derived from drivers/can.c
|
||||
*
|
||||
* Copyright (C) 2008-2009 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
|
|
|
|||
Loading…
Reference in New Issue