nuttx-bb/nuttx/include/nuttx/fs.h

/****************************************************************************
 * include/nuttx/fs.h
 *
 *   Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

#ifndef __NUTTX_FS_H
#define __NUTTX_FS_H

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <sys/types.h>
#include <semaphore.h>
#include <nuttx/compiler.h>

/****************************************************************************
 * Definitions
 ****************************************************************************/

/****************************************************************************
 * Type Definitions
 ****************************************************************************/

/* This structure is provided by devices when they are registered with the
 * system.  It is used to call back to perform device specific operations.
 */

struct file;
struct file_operations
{
  /* The device driver open method differs from the mountpoint open method */

  int     (*open)(FAR struct file *filp);

  /* The following methods must be identical in signature and position because
   * the struct file_operations and struct mountp_operations are treated like
   * unions.
   */

  int     (*close)(FAR struct file *filp);
  ssize_t (*read)(FAR struct file *filp, FAR char *buffer, size_t buflen);
  ssize_t (*write)(FAR struct file *filp, FAR const char *buffer, size_t buflen);
  off_t   (*seek)(FAR struct file *filp, off_t offset, int whence);
  int     (*ioctl)(FAR struct file *filp, int cmd, unsigned long arg);

  /* The two structures need not be common after this point */
};

/* This structure provides information about the state of a block driver */

#ifndef CONFIG_DISABLE_MOUNTPOUNT
struct geometry
{
  boolean geo_available;    /* TRUE: The device is vailable */
  boolean geo_mediachanged; /* TRUE: The media has changed since last query */
  boolean geo_writeenabled; /* TRUE: It is okay to write to this device */
  size_t  geo_nsectors;     /* Number of sectors on the device */
  size_t  geo_sectorsize;   /* Size of one sector */
};

/* This structure is provided by block devices when they register with the
 * system.  It is used by file systems to perform filesystem transfers.  It
 * differs from the normal driver vtable in several ways -- most notably in
 * that it deals in struct inode vs. struct filep.
 */

struct inode;
struct block_operations
{
  int     (*open)(FAR struct inode *inode);
  int     (*close)(FAR struct inode *inode);
  ssize_t (*read)(FAR struct inode *inode, FAR unsigned char *buffer,
                  size_t start_sector, unsigned int nsectors);
  ssize_t (*write)(FAR struct inode *inode, FAR const unsigned char *buffer,
                   size_t start_sector, unsigned int nsectors);
  int     (*geometry)(FAR struct inode *inode, FAR struct geometry *geometry);
  int     (*ioctl)(FAR struct inode *inode, int cmd, unsigned long arg);
};

/* This structure is provided by a filesystem to describe a mount point.
 * Note that this structure differs from file_operations ONLY in the form of
 * the open method.  Once the file is opened, it can be accessed either as a
 * struct file_operations or struct mountpt_operations
 */

struct inode;
struct internal_dir_s;
struct stat;
struct statfs;
struct mountpt_operations
{
  /* The mountpoint open method differs from the driver open method
   * because it receives (1) the inode that contains the mountpoint
   * private data, (2) the relative path into the mountpoint, and (3)
   * information to manage privileges.
   */

  int     (*open)(FAR struct file *filp, FAR const char *relpath,
                  int oflags, mode_t mode);

  /* The following methods must be identical in signature and position because
   * the struct file_operations and struct mountp_operations are treated like
   * unions.
   */

  int     (*close)(FAR struct file *filp);
  ssize_t (*read)(FAR struct file *filp, FAR char *buffer, size_t buflen);
  ssize_t (*write)(FAR struct file *filp, FAR const char *buffer, size_t buflen);
  off_t   (*seek)(FAR struct file *filp, off_t offset, int whence);
  int     (*ioctl)(FAR struct file *filp, int cmd, unsigned long arg);

  /* The two structures need not be common after this point. The following
   * are extended methods needed to deal with the unique needs of mounted
   * file systems.
   *
   * Additional open-file-specific mountpoint operations:
   */

  int     (*sync)(FAR struct file *filp);

  /* Directory operations */

  int     (*opendir)(FAR struct inode *mountpt, FAR const char *relpath, FAR struct internal_dir_s *dir);
  int     (*closedir)(FAR struct inode *mountpt, FAR struct internal_dir_s *dir);
  int     (*readdir)(FAR struct inode *mountpt, FAR struct internal_dir_s *dir);
  int     (*rewinddir)(FAR struct inode *mountpt, FAR struct internal_dir_s *dir);

  /* General volume-related mountpoint operations: */

  int     (*bind)(FAR struct inode *blkdriver, FAR const void *data, FAR void **handle);
  int     (*unbind)(FAR void *handle, FAR struct inode **blkdriver);

  int     (*statfs)(FAR struct inode *mountpt, FAR struct statfs *buf);

  /* Operations on pathes */

  int     (*unlink)(FAR struct inode *mountpt, FAR const char *relpath);
  int     (*mkdir)(FAR struct inode *mountpt, FAR const char *relpath, mode_t mode);
  int     (*rmdir)(FAR struct inode *mountpt, FAR const char *relpath);
  int     (*rename)(FAR struct inode *mountpt, FAR const char *oldrelpath, FAR const char *newrelpath);
  int     (*stat)(FAR struct inode *mountpt, FAR const char *relpath, FAR struct stat *buf);

  /* NOTE:  More operations will be needed here to support:  disk usage stats
   * file stat(), file attributes, file truncation, etc.
   */
};
#endif /* CONFIG_DISABLE_MOUNTPOUNT */

/* These are the various kinds of operations that can be associated with
 * an inode.
 */

union inode_ops_u
{
  FAR const struct file_operations    *i_ops;  /* Driver operations for inode */
#ifndef CONFIG_DISABLE_MOUNTPOUNT
  FAR const struct block_operations   *i_bops; /* Block driver operations */
  FAR const struct mountpt_operations *i_mops; /* Operations on a mountpoint */
#endif
};

/* This structure represents one inode in the Nuttx psuedo-file system */

struct inode
{
  FAR struct inode *i_peer;       /* Pointer to same level inode */
  FAR struct inode *i_child;      /* Pointer to lower level inode */
  sint16            i_crefs;      /* References to inode */
  uint16            i_flags;      /* Flags for inode */
  union inode_ops_u u;            /* Inode operations */
#ifdef CONFIG_FILE_MODE
  mode_t            i_mode;       /* Access mode flags */
#endif
  FAR void         *i_private;    /* Per inode driver private data */
  char              i_name[1];    /* Name of inode (variable) */
};
#define FSNODE_SIZE(n) (sizeof(struct inode) + (n))

/* This is the underlying representation of an open file.  A file
 * descriptor is an index into an array of such types. The type associates
 * the file descriptor to the file state and to a set of inode operations.
 */

struct file
{
  int               f_oflags; /* Open mode flags */
  off_t             f_pos;    /* File position */
  FAR struct inode *f_inode;  /* Driver interface */
  void             *f_priv;   /* Per file driver private data */
};

/* This defines a list of files indexed by the file descriptor */

#if CONFIG_NFILE_DESCRIPTORS > 0
struct filelist
{
  sem_t  fl_sem;          /* Manage access to the file list */
  sint16 fl_crefs;        /* Reference count */
  struct file fl_files[CONFIG_NFILE_DESCRIPTORS];
};
#endif

/* The following structure defines the list of files used for standard C I/O.
 * Note that NuttX can support the standard C APIs without or without buffering
 *
 * When buffering us used, the following described the usage of the I/O buffer.
 * The buffer can be used for reading or writing -- but not both at the same time.
 * An fflush is implied between each change in directionof access.
 *
 * The field fs_bufread determines whether the buffer is being used for reading or
 * for writing as fillows:
 *
 *              BUFFER
 *     +----------------------+ <- fs_bufstart Points to the beginning of the buffer.
 *     | WR: Buffered data    |                WR: Start of buffered write data.
 *     | RD: Already read     |                RD: Start of already read data.
 *     +----------------------+
 *     | WR: Available buffer | <- fs_bufpos   Points to next byte:
 *     | RD: Read-ahead data  |                WR: End+1 of buffered write data.
 *     |                      |                RD: Points to next char to return
 *     +----------------------+
 *     | WR: Available        | <- fs_bufread  Top+1 of buffered read data
 *     | RD: Available        |                WR: =bufstart buffer used for writing.
 *     |                      |                RD: Pointer to last buffered read char+1
 *     +----------------------+
 *                              <- fs_bufend   Points to end end of the buffer+1
 */

#if CONFIG_NFILE_STREAMS > 0
struct file_struct
{
  int                fs_filedes;   /* File descriptor associated with stream */
  mode_t             fs_oflags;    /* Open mode flags */
#if CONFIG_NUNGET_CHARS > 0
  uint8              fs_nungotten; /* The number of characters buffered for ungetc */
  unsigned char      fs_ungotten[CONFIG_NUNGET_CHARS];
#endif
#if CONFIG_STDIO_BUFFER_SIZE > 0
  sem_t              fs_sem;       /* For thread safety */
  pid_t              fs_holder;    /* Holder of sem */
  int                fs_counts;    /* Number of times sem is held */
  FAR unsigned char *fs_bufstart;  /* Pointer to start of buffer */
  FAR unsigned char *fs_bufend;    /* Pointer to 1 past end of buffer */
  FAR unsigned char *fs_bufpos;    /* Current position in buffer */
  FAR unsigned char *fs_bufread;   /* Pointer to 1 past last buffered read char. */
#endif
};

struct streamlist
{
  int                 sl_crefs; /* Reference count */
  sem_t               sl_sem;   /* For thread safety */
  struct file_struct sl_streams[CONFIG_NFILE_STREAMS];
};
#endif /* CONFIG_NFILE_STREAMS */

/****************************************************************************
 * Global Function Prototypes
 ****************************************************************************/

#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C" {
#else
#define EXTERN extern
#endif

/* fs_inode.c ***************************************************************/

/* These interfaces are used by drivers to register their
 * inodes in the inode tree.
 */

EXTERN void   weak_function fs_initialize(void);

/* fs_registerdriver.c ******************************************************/

EXTERN STATUS register_driver(const char *path,
                              const struct file_operations *fops,
                              mode_t mode, void *private);

/* fs_registerdriver.c ******************************************************/

EXTERN STATUS register_blockdriver(const char *path,
                                   const struct block_operations *bops,
                                   mode_t mode, void *private);

/* fs_unregisterdriver.c ****************************************************/

EXTERN STATUS unregister_driver(const char *path);

/* fs_unregisterblockdriver.c ***********************************************/

EXTERN STATUS unregister_blockdriver(const char *path);

/* fs_open.c ****************************************************************/

EXTERN int   inode_checkflags(FAR struct inode *inode, int oflags);

/* fs_files.c ***************************************************************/

#if CONFIG_NFILE_DESCRIPTORS >0
EXTERN FAR struct filelist *files_alloclist(void);
EXTERN int files_addreflist(FAR struct filelist *list);
EXTERN int files_releaselist(FAR struct filelist *list);
EXTERN int files_dup(FAR struct file *filep1, FAR struct file *filep2);

/* fs_openblockdriver.c ******************************************************/

EXTERN int open_blockdriver(FAR const char *pathname, int mountflags,
                            FAR struct inode **ppinode);

/* fs_closeblockdriver.c *****************************************************/

EXTERN int close_blockdriver(FAR struct inode *inode);
#endif

/* lib_fopen.c **************************************************************/

/* Used by the OS to clone stdin, stdout, stderr */

#if CONFIG_NFILE_STREAMS > 0
EXTERN FAR struct file_struct *lib_fdopen(int fd,
                                          const char *mode,
                                          FAR struct filelist *flist,
                                          FAR struct streamlist *slist);
#endif

/* lib_fflush.c *************************************************************/

#if CONFIG_NFILE_STREAMS > 0
EXTERN int lib_flushall(FAR struct streamlist *list);
#endif

/* drivers ******************************************************************/

/* Call any of these to register the corresponding drivers in the drivers/
 * subdirectory
 */

/* Register /dev/null */

EXTERN void devnull_register(void);

/* Setup the loop device so that it exports the file referenced by 'filename'
 * as a block device.
 */

EXTERN int losetup(const char *devname, const char *filename, uint16 sectsize,
                   off_t offset, boolean readonly);
EXTERN int loteardown(const char *devname);

/*   Setup so that the block driver referenced by 'blkdev' can be accessed
 *   similar to a character device.
 */

EXTERN int bchdev_register(const char *blkdev, const char *chardev, boolean readonly);
EXTERN int bchdev_unregister(const char *chardev);
EXTERN int bchlib_setup(const char *blkdev, boolean readonly, FAR void **handle);
EXTERN int bchlib_teardown(FAR void *handle);
EXTERN ssize_t bchlib_read(FAR void *handle, FAR char *buffer, size_t offset, size_t len);
EXTERN ssize_t bchlib_write(FAR void *handle, FAR const char *buffer, size_t offset, size_t len);

#undef EXTERN
#if defined(__cplusplus)
}
#endif

#endif /* __NUTTX_FS_H */