![Guy Harris](/assets/img/avatar_default.png)
for "Bridging PDU"s (which I'm assuming are 802.1d Spanning Tree BPDUs), and have the STP and LANBridge100 STP dissectors register them with the "ppp.protocol" dissector table. Fix the value for the PPP type for MPLS Multicast (it's 0x0283, not 0x0281). svn path=/trunk/; revision=2896
97 lines
3.9 KiB
C
97 lines
3.9 KiB
C
/* ppptypes.h
|
|
* Defines PPP packet types.
|
|
*
|
|
* $Id: ppptypes.h,v 1.5 2001/01/14 08:25:14 guy Exp $
|
|
*
|
|
* Ethereal - Network traffic analyzer
|
|
* By Gerald Combs <gerald@zing.org>
|
|
* Copyright 1998 Gerald Combs
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
*/
|
|
|
|
#ifndef __PPPTYPES_H__
|
|
#define __PPPTYPES_H__
|
|
|
|
/* Protocol types, from Linux "ppp_defs.h" and
|
|
|
|
http://www.isi.edu/in-notes/iana/assignments/ppp-numbers
|
|
|
|
*/
|
|
#define PPP_IP 0x21 /* Internet Protocol */
|
|
#define PPP_AT 0x29 /* AppleTalk Protocol */
|
|
#define PPP_IPX 0x2b /* IPX protocol */
|
|
#define PPP_VJC_COMP 0x2d /* VJ compressed TCP */
|
|
#define PPP_VJC_UNCOMP 0x2f /* VJ uncompressed TCP */
|
|
#define PPP_BPDU 0x31 /* Bridging PDU (spanning tree BPDU?) */
|
|
#define PPP_VINES 0x35 /* Banyan Vines */
|
|
#define PPP_MP 0x3d /* Multilink PPP */
|
|
#define PPP_IPV6 0x57 /* Internet Protocol Version 6 */
|
|
#define PPP_COMP 0xfd /* compressed packet */
|
|
#define PPP_DEC_LB 0x0205 /* DEC LANBridge100 Spanning Tree */
|
|
#define PPP_MPLS_UNI 0x0281 /* MPLS Unicast */
|
|
#define PPP_MPLS_MULTI 0x0283 /* MPLS Multicast */
|
|
#define PPP_IPCP 0x8021 /* IP Control Protocol */
|
|
#define PPP_ATCP 0x8029 /* AppleTalk Control Protocol */
|
|
#define PPP_IPXCP 0x802b /* IPX Control Protocol */
|
|
#define PPP_CCP 0x80fd /* Compression Control Protocol */
|
|
#define PPP_LCP 0xc021 /* Link Control Protocol */
|
|
#define PPP_PAP 0xc023 /* Password Authentication Protocol */
|
|
#define PPP_LQR 0xc025 /* Link Quality Report protocol */
|
|
#define PPP_CHAP 0xc223 /* Cryptographic Handshake Auth. Protocol */
|
|
#define PPP_CBCP 0xc029 /* Callback Control Protocol */
|
|
|
|
/*
|
|
* Address and control field for Cisco HDLC.
|
|
* RFC 1547, "Requirements for an Internet Standard Point-to-Point Protocol",
|
|
* section 4.3.1 "Cisco Systems point-to-point protocols", says
|
|
*
|
|
* The Cisco Systems gateway supports both asynchronous links using SLIP
|
|
* and synchronous links using either simple HDLC framing, X.25 LAPB or
|
|
* full X.25. The HDLC framing procedure includes a four byte header.
|
|
* The first octet (address) is either 0x0F (unicast intent) or 0x8F
|
|
* (multicast intent). The second octet (control byte) is left zero and
|
|
* is not checked on reception. The third and fourth octets contain a
|
|
* standard 16 bit Ethernet protocol type code.
|
|
*
|
|
* This is the first two octets for unicast intent frames.
|
|
*/
|
|
#define CISCO_HDLC_ADDR_CTRL 0x0F00 /* Internet Protocol */
|
|
|
|
/*
|
|
* Protocol types for the Cisco HDLC format.
|
|
*
|
|
* As per the above, according to RFC 1547, these are "standard 16 bit
|
|
* Ethernet protocol type code[s]", but 0x8035 is Reverse ARP, and
|
|
* that is (at least according to the Linux ISDN code) not the
|
|
* same as Cisco SLARP.
|
|
*
|
|
* In addition, 0x2000 is apparently the Cisco Discovery Protocol, but
|
|
* on Ethernet those are encapsulated inside SNAP with an OUI of
|
|
* OUI_CISCO, not OUI_ENCAP_ETHER.
|
|
*
|
|
* Perhaps we should set up a protocol table for those protocols
|
|
* that differ between Ethernet and Cisco HDLC, and have the PPP
|
|
* code first try that table and, if it finds nothing in that
|
|
* table, call "ethertype()". (Unfortunately, that means that -
|
|
* assuming we had a Cisco SLARP dissector - said dissector were
|
|
* disabled, SLARP packets would be dissected as Reverse ARP
|
|
* packets, not as data.
|
|
*/
|
|
#define CISCO_SLARP 0x8035 /* Cisco SLARP protocol */
|
|
|
|
#endif /* ppptypes.h */
|