681f2bbdef
epan/sigcomp_state_hdlr.c epan/sigcomp_state_hdlr.h
---------------------------------------------------
Function udvm_state_access:
1. Removed the state_vars_valid parameter. It is no longer used.
2. The function now correctly updates each of state_length,
state_address and state_instruction with saved state value.
[Previously this was only done for state referenced in the SigComp
message header.]
3. Removed code that (incorrectly) read byte_copy_left from UDVM memory
within the loop that writes the state to UDVM memory.
4. Removed the code that set the useful values in UDVM memory. This
should only be done for state referenced in the SigComp message
header. (The decompress_sigcomp_message function, sets the useful
values.)
epan/sigcomp-udvm.c epan/sigcomp-udvm.h
---------------------------------------
Function decompress_sigcomp_message:
1. Added three new parameters; header_len, byte_code_state_len,
byte_code_id_len. The byte_code_state_len and byte_code_id_len
are used to set the useful values in UDVM memory. The
header_len is required to calculate the cycles available
for decompression.
2. Various minor corrections to spellings, etc in generated
messages.
3. Reduced the number of lines of output for print_level_1. Now
the execution trace shows the instruction name and parameter
values on one line.
[This was done because, we found that even at the lowest
level of detail ethereal became unusably slow; running on
a 500 MHz SPARC. This seems to be related to the number of
lines produced by the SigComp trace, which can easily be over
1000 with the modified code.]
4. Removed the used of some floating point functions. In all
cases they were unnecessary and could potentially cause the
code to produce the wrong results on some platforms (although
this is unlikely).
5. The useful values are now set correctly, using the new
byte_code_state_len and byte_code_id_len parameters.
6. The message header length is now included in the calculation of
maximum_UDVM_cycles. Previously, the calculation could underestimate
the value, resulting in the (small) chance that some legitimate
messages might fail to decompress.
Note: The calculation might now slightly over-estimate the cycles
but this is a reasonable thing to do.
7. Implemented the PUSH, POP, CALL and RETURN instructions.
Note: The two SORT instructions and the CRC and SHA-1 instructions
are still not implemented.
8. The COPY and COPY-LITERAL instructions now apply the
byte-copying-rules to the source address as well as the destination
address.
9. The COPY-LITERAL and COPY-OFFSET now correctly handle the
destination operand. Previously, it was possible for the destination
to be left at byte_copy_right when it should be left at
byte_copy_left.
10. All three COPY instructions will now behave correctly if the source
or destination start at byte_copy_right; i.e. they read/write to
byte_copy_right, byte_copy_right+1, etc. Previously the parameters
would wrap to byte_copy_left.
11. The COPY-OFFSET instruction now correctly calculates the source
address for all values of offset. Previously a very large offset
(greater than the circular buffer size) could cause the starting
position to be mis-calculated.
12. Modulo 65536 arithmetic has been added in some places where it was
missing.
[Only when noticed, we have not been able to check all the code.]
13. Some redundant code was removed for the INPUT-BITS instruction.
Also, INPUT-BITS (0, x, x) now correctly discards spare bits when
the P-bit, has changed.
14. Corrected the cycles used calculation for the INPUT-BITS
instruction.
15. Corrected some minor cases where the used_udvm_cycles was not
incremented.
[Not really a problem, but it allowed us to verify correctness with
some of the SigComp torture tests.]
16. Removed some redundant code in INPUT-HUFFMAN (and reorganised some
comments to keep them making sense).
Function decomp_dispatch_get_bits:
1. This has been rewritten. The original version could not correctly
handle requests for more than 8 bits. The new version is cleaner and
correctly handles all cases.
svn path=/trunk/; revision=14666
49 lines
1.8 KiB
C
49 lines
1.8 KiB
C
/* udvm.h
|
|
* Routines making up the Univerasl Decompressor Virtual Machine (UDVM) used for
|
|
* Signaling Compression (SigComp) dissection.
|
|
* Copyright 2004, Anders Broman <anders.broman@ericsson.com>
|
|
*
|
|
* $Id$
|
|
*
|
|
* Ethereal - Network traffic analyzer
|
|
* By Gerald Combs <gerald@ethereal.com>
|
|
* Copyright 1998 Gerald Combs
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
* References:
|
|
* http://www.ietf.org/rfc/rfc3320.txt?number=3320
|
|
* http://www.ietf.org/rfc/rfc3321.txt?number=3321
|
|
* Useful links :
|
|
* http://www.ietf.org/internet-drafts/draft-ietf-rohc-sigcomp-impl-guide-02.txt
|
|
* http://www.ietf.org/internet-drafts/draft-ietf-rohc-sigcomp-sip-01.txt
|
|
*/
|
|
|
|
#ifndef SIGCOMP_UDVM_H
|
|
#define SIGCOMP_UDVM_H
|
|
|
|
#define UDVM_MEMORY_SIZE 65536
|
|
|
|
extern tvbuff_t* decompress_sigcomp_message(tvbuff_t *bytecode_tvb, tvbuff_t *message_tvb, packet_info *pinfo,
|
|
proto_tree *tree, gint destination,
|
|
gint print_flags, gint hf_id, gint header_len,
|
|
gint byte_code_state_len, gint byte_code_id_len);
|
|
|
|
|
|
|
|
/* example: extern const value_string q931_cause_location_vals[]; */
|
|
#endif
|
|
/* SIGCOMP_UDVM_H */
|
|
|