593 lines
26 KiB
C
593 lines
26 KiB
C
/* packet-gryphon.h
|
|
*
|
|
* Updated routines for Gryphon protocol packet dissection
|
|
* By Mark C. <markc@dgtech.com>
|
|
* Copyright (C) 2018 DG Technologies, Inc. (Dearborn Group, Inc.) USA
|
|
*
|
|
* Definitions for Gryphon packet disassembly structures and routines
|
|
* By Steve Limkemann <stevelim@dgtech.com>
|
|
* Copyright 1998 Steve Limkemann
|
|
*
|
|
* Wireshark - Network traffic analyzer
|
|
* By Gerald Combs <gerald@wireshark.org>
|
|
* Copyright 1998 Gerald Combs
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0-or-later
|
|
*/
|
|
|
|
#define MSG_HDR_SZ 8
|
|
#define CMD_HDR_SZ 4
|
|
|
|
/* source/destinations: */
|
|
|
|
#define SD_CARD 0x01 /* (vehicle) network interface */
|
|
#define SD_SERVER 0x02
|
|
#define SD_CLIENT 0x03
|
|
#define SD_KNOWN 0x10 /* Client ID >= are well known */
|
|
#define SD_SCHED 0x10 /* scheduler */
|
|
#define SD_SCRIPT 0x20 /* script processor */
|
|
#define SD_PGM 0x21 /* Program loader */
|
|
#define SD_USDT 0x22 /* USDT (Unacknowledged Segmented Data Transfer) */
|
|
#define SD_BLM 0x23 /* Bus Load Monitoring */
|
|
#define SD_LIN 0x24 /* LIN extensions */
|
|
#define SD_FLIGHT 0x25 /* Flight Recorder */
|
|
#define SD_LOGGER 0x25 /* data logger */
|
|
#define SD_RESP 0x26 /* Message Response */
|
|
#define SD_IOPWR 0x27 /* VNG / Compact Gryphon I/O & power */
|
|
#define SD_UTIL 0x28 /* Miscellaneous utility commands */
|
|
#define SD_CNVT 0x29 /* signal conversion commands */
|
|
#define CH_BROADCAST 0xFF /* broadcast message destination channel */
|
|
|
|
|
|
|
|
/* frame types: */
|
|
#define GY_FT_CMD 0x01 /* command to initiate some action */
|
|
#define GY_FT_RESP 0x02 /* response to a command */
|
|
#define GY_FT_DATA 0x03 /* (vehicle) network data */
|
|
#define GY_FT_EVENT 0x04 /* notification of an event */
|
|
#define GY_FT_MISC 0x05 /* misc data */
|
|
#define GY_FT_TEXT 0x06 /* null-terminated ASCII strings */
|
|
#define GY_FT_SIG 0x07 /* (vehicle) network signals */
|
|
|
|
|
|
|
|
/* generic (all SD type) commands: values 0x00 to 0x3f */
|
|
|
|
#define CMD_INIT 0x01 /* initialize target */
|
|
#define CMD_GET_STAT 0x02 /* request status */
|
|
#define CMD_GET_CONFIG 0x03 /* request configuration info */
|
|
#define CMD_EVENT_ENABLE 0x04 /* Enable event type */
|
|
#define CMD_EVENT_DISABLE 0x05 /* Disable event type */
|
|
#define CMD_GET_TIME 0x06 /* Get current value of timestamp */
|
|
#define CMD_GET_RXDROP 0x07 /* Get count of Rx msgs dropped */
|
|
#define CMD_RESET_RXDROP 0x08 /* Set count of Rx msgs dropped to zero */
|
|
#define CMD_BCAST_ON 0x09 /* broadcasts on */
|
|
#define CMD_BCAST_OFF 0x0a /* broadcasts off */
|
|
#define CMD_SET_TIME 0x0b /* set time */
|
|
|
|
/* SD-type specific commands: should start at 0x40, global uniqueness */
|
|
/* is preferred, but not mandatory. */
|
|
|
|
/* SD_CARD command types: */
|
|
|
|
#define CMD_CARD_SET_SPEED (SD_CARD * 256 + 0x40) /* set peripheral speed */
|
|
#define CMD_CARD_GET_SPEED (SD_CARD * 256 + 0x41) /* get peripheral speed */
|
|
#define CMD_CARD_SET_FILTER (SD_CARD * 256 + 0x42) /* set filter to pass or block all */
|
|
#define CMD_CARD_GET_FILTER (SD_CARD * 256 + 0x43) /* get a pass/block filter */
|
|
#define CMD_CARD_TX (SD_CARD * 256 + 0x44) /* transmit message */
|
|
#define CMD_CARD_TX_LOOP_ON (SD_CARD * 256 + 0x45) /* set transmit loopback on */
|
|
#define CMD_CARD_TX_LOOP_OFF (SD_CARD * 256 + 0x46) /* set transmit loopback off */
|
|
#define CMD_CARD_IOCTL (SD_CARD * 256 + 0x47) /* device driver ioctl pass-through */
|
|
#define CMD_CARD_ADD_FILTER (SD_CARD * 256 + 0x48) /* add a pass/block filter */
|
|
#define CMD_CARD_MODIFY_FILTER (SD_CARD * 256 + 0x49) /* modify a pass/block filter */
|
|
#define CMD_CARD_GET_FILTER_HANDLES (SD_CARD * 256 + 0x4A)/* get a list of filters */
|
|
#define CMD_CARD_SET_DEFAULT_FILTER (SD_CARD * 256 + 0x4B)/* set the default action */
|
|
#define CMD_CARD_GET_DEFAULT_FILTER (SD_CARD * 256 + 0x4C)/* get the defautl action */
|
|
#define CMD_CARD_SET_FILTER_MODE (SD_CARD * 256 + 0x4D) /* set the client data mode */
|
|
#define CMD_CARD_GET_FILTER_MODE (SD_CARD * 256 + 0x4E) /* get the client data mode */
|
|
#define CMD_CARD_GET_EVNAMES (SD_CARD * 256 + 0x4f) /* get event names */
|
|
#define CMD_CARD_GET_SPEEDS (SD_CARD * 256 + 0x50) /* get speed definitions */
|
|
|
|
/* SD_SERVER command types: */
|
|
|
|
#define CMD_SERVER_REG (SD_SERVER * 256 + 0x50) /* register connection */
|
|
#define CMD_SERVER_SET_SORT (SD_SERVER * 256 + 0x51) /* set sorting behavior */
|
|
#define CMD_SERVER_SET_OPT (SD_SERVER * 256 + 0x52) /* set type of optimization */
|
|
|
|
/* SD_CLIENT command types: */
|
|
|
|
#define CMD_CLIENT_GET_ID (SD_CLIENT * 256 + 0x60) /* get the ID (channel field) of this client? */
|
|
#define CMD_CLIENT_SET_ID (SD_CLIENT * 256 + 0x61) /* set the ID (channel field) of this client? */
|
|
#define CMD_CLIENT_SHUTDOWN (SD_CLIENT * 256 + 0x62) /* tell client to die ? */
|
|
|
|
/* Bus load monitor (SD_BLM) commands: */
|
|
|
|
#define CMD_BLM_SET_MODE (SD_BLM * 256 + 0xA0)
|
|
#define CMD_BLM_GET_MODE (SD_BLM * 256 + 0xA1)
|
|
#define CMD_BLM_GET_DATA (SD_BLM * 256 + 0xA2)
|
|
#define CMD_BLM_GET_STATS (SD_BLM * 256 + 0xA3)
|
|
|
|
/* SD_LIN command types: */
|
|
#define CMD_LDF_DESC (SD_LIN * 256 + 0xB8) /* */
|
|
#define CMD_LDF_UPLOAD (SD_LIN * 256 + 0xB9) /* */
|
|
#define CMD_LDF_LIST (SD_LIN * 256 + 0xBA) /* */
|
|
#define CMD_LDF_DELETE (SD_LIN * 256 + 0xBB) /* */
|
|
#define CMD_LDF_PARSE (SD_LIN * 256 + 0xBC) /* */
|
|
#define CMD_GET_LDF_INFO (SD_LIN * 256 + 0xBD) /* */
|
|
#define CMD_GET_NODE_NAMES (SD_LIN * 256 + 0xBE) /* */
|
|
#define CMD_EMULATE_NODES (SD_LIN * 256 + 0xBF) /* */
|
|
#define CMD_GET_FRAMES (SD_LIN * 256 + 0xB0) /* */
|
|
#define CMD_GET_FRAME_INFO (SD_LIN * 256 + 0xC1) /* */
|
|
#define CMD_GET_SIGNAL_INFO (SD_LIN * 256 + 0xC2) /* */
|
|
#define CMD_GET_SIGNAL_DETAIL (SD_LIN * 256 + 0xC3) /* */
|
|
#define CMD_GET_ENCODING_INFO (SD_LIN * 256 + 0xC4) /* */
|
|
#define CMD_GET_SCHEDULES (SD_LIN * 256 + 0xC5) /* */
|
|
#define CMD_START_SCHEDULE (SD_LIN * 256 + 0xC6) /* */
|
|
#define CMD_STOP_SCHEDULE (SD_LIN * 256 + 0xC7) /* */
|
|
#define CMD_STORE_DATA (SD_LIN * 256 + 0xC8) /* */
|
|
#define CMD_SEND_ID (SD_LIN * 256 + 0xC9) /* */
|
|
#define CMD_SEND_ID_DATA (SD_LIN * 256 + 0xCA) /* */
|
|
#define CMD_SAVE_SESSION (SD_LIN * 256 + 0xCB) /* */
|
|
#define CMD_RESTORE_SESSION (SD_LIN * 256 + 0xCC) /* */
|
|
#define CMD_GET_NODE_SIGNALS (SD_LIN * 256 + 0xCD) /* */
|
|
|
|
/* signal conversion (SD_CNVT) commands */
|
|
|
|
#define CMD_CNVT_GET_VALUES (SD_CNVT * 256 + 0x78) /* LIN Signal Conversion */
|
|
#define CMD_CNVT_GET_UNITS (SD_CNVT * 256 + 0x79) /* LIN Signal Conversion */
|
|
#define CMD_CNVT_SET_VALUES (SD_CNVT * 256 + 0x7A) /* LIN Signal Conversion */
|
|
#define CMD_CNVT_DESTROY_SESSION (SD_CNVT * 256 + 0x7B) /* LIN Signal Conversion */
|
|
#define CMD_CNVT_SAVE_SESSION (SD_CNVT * 256 + 0xCB) /* LIN Signal Conversion */
|
|
#define CMD_CNVT_RESTORE_SESSION (SD_CNVT * 256 + 0xCC) /* LIN Signal Conversion */
|
|
#define CMD_CNVT_GET_NODE_SIGNALS (SD_CNVT * 256 + 0xCD) /* LIN Signal Conversion */
|
|
|
|
/* Flight recorder (SD_FLIGHT) commands */
|
|
|
|
#define CMD_FLIGHT_GET_CONFIG (SD_FLIGHT * 256 + 0x50) /* get flight recorder channel info */
|
|
#define CMD_FLIGHT_START_MON (SD_FLIGHT * 256 + 0x51) /* start flight recorder monitoring */
|
|
#define CMD_FLIGHT_STOP_MON (SD_FLIGHT * 256 + 0x52) /* stop flight recorder monitoring */
|
|
|
|
/* Message responder (SD_RESP) commands: */
|
|
#define CMD_MSGRESP_ADD (SD_RESP * 256 + 0xB0)
|
|
#define CMD_MSGRESP_GET (SD_RESP * 256 + 0xB1)
|
|
#define CMD_MSGRESP_MODIFY (SD_RESP * 256 + 0xB2)
|
|
#define CMD_MSGRESP_GET_HANDLES (SD_RESP * 256 + 0xB3)
|
|
|
|
/* Program loader (SD_PGM) commands: */
|
|
|
|
#define CMD_PGM_DESC (SD_PGM * 256 + 0x90) /* Describe a program to be uploaded */
|
|
#define CMD_PGM_UPLOAD (SD_PGM * 256 + 0x91) /* Upload a program to the Gryphon */
|
|
#define CMD_PGM_DELETE (SD_PGM * 256 + 0x92) /* Delete an uploaded program */
|
|
#define CMD_PGM_LIST (SD_PGM * 256 + 0x93) /* Get a list of uploaded programs */
|
|
#define CMD_PGM_START (SD_PGM * 256 + 0x94) /* Start an uploaded program */
|
|
#define CMD_PGM_START2 (SD_CLIENT * 256 + 0x94) /* Start an uploaded program */
|
|
#define CMD_PGM_STOP (SD_PGM * 256 + 0x95) /* Stop an uploaded program */
|
|
#define CMD_PGM_STATUS (SD_PGM * 256 + 0x96) /* Get the status of an uploaded program */
|
|
#define CMD_PGM_OPTIONS (SD_PGM * 256 + 0x97) /* Set the upload options */
|
|
#define CMD_PGM_FILES (SD_PGM * 256 + 0x98) /* Get a list of files & directories */
|
|
|
|
/* Scheduler (SD_SCHED) target commands: */
|
|
|
|
#define CMD_SCHED_TX (SD_SCHED * 256 + 0x70) /* schedule transmission list */
|
|
#define CMD_SCHED_KILL_TX (SD_SCHED * 256 + 0x71) /* stop and destroy job */
|
|
#define CMD_SCHED_MSG_REPLACE (SD_SCHED * 256 + 0x72) /* replace a scheduled message */
|
|
|
|
/* USDT (SD_USDT) target commands: */
|
|
|
|
#define CMD_USDT_IOCTL (SD_USDT * 256 + 0x47) /* Register/Unregister with USDT */
|
|
#define CMD_USDT_REGISTER (SD_USDT * 256 + 0xB0) /* Register/Unregister with USDT */
|
|
#define CMD_USDT_SET_FUNCTIONAL (SD_USDT * 256 + 0xB1) /* Set to use extended addressing*/
|
|
#define CMD_USDT_SET_STMIN_MULT (SD_USDT * 256 + 0xB2) /* */
|
|
#define CMD_USDT_SET_STMIN_FC (SD_USDT * 256 + 0xB3) /* */
|
|
#define CMD_USDT_GET_STMIN_FC (SD_USDT * 256 + 0xB4) /* */
|
|
#define CMD_USDT_SET_BSMAX_FC (SD_USDT * 256 + 0xB5) /* */
|
|
#define CMD_USDT_GET_BSMAX_FC (SD_USDT * 256 + 0xB6) /* */
|
|
#define CMD_USDT_REGISTER_NON_LEGACY (SD_USDT * 256 + 0xB7) /* Register/Unregister with USDT */
|
|
#define CMD_USDT_SET_STMIN_OVERRIDE (SD_USDT * 256 + 0xB8) /* */
|
|
#define CMD_USDT_GET_STMIN_OVERRIDE (SD_USDT * 256 + 0xB9) /* */
|
|
#define CMD_USDT_ACTIVATE_STMIN_OVERRIDE (SD_USDT * 256 + 0xBA) /* */
|
|
|
|
/* I/O Power (SD_IOPWR) target commands: */
|
|
|
|
#define CMD_IOPWR_GETINP (SD_IOPWR * 256 + 0x40) /* Read current digital inputs */
|
|
#define CMD_IOPWR_GETLATCH (SD_IOPWR * 256 + 0x41) /* Read latched digital inputs */
|
|
#define CMD_IOPWR_CLRLATCH (SD_IOPWR * 256 + 0x42) /* Read & clear latched inputs */
|
|
#define CMD_IOPWR_GETOUT (SD_IOPWR * 256 + 0x43) /* Read digital outputs */
|
|
#define CMD_IOPWR_SETOUT (SD_IOPWR * 256 + 0x44) /* Write digital outputs */
|
|
#define CMD_IOPWR_SETBIT (SD_IOPWR * 256 + 0x45) /* Set indicated output bit(s) */
|
|
#define CMD_IOPWR_CLRBIT (SD_IOPWR * 256 + 0x46) /* Clear indicated output bit(s)*/
|
|
#define CMD_IOPWR_GETPOWER (SD_IOPWR * 256 + 0x47) /* Read inputs at power on time */
|
|
|
|
/* Miscellaneous (SD_UTIL) target commands: */
|
|
|
|
#define CMD_UTIL_SET_INIT_STRATEGY (SD_UTIL * 256 + 0x90) /* set the initialization strategy */
|
|
#define CMD_UTIL_GET_INIT_STRATEGY (SD_UTIL * 256 + 0x91) /* get the initialization strategy */
|
|
|
|
/* response frame (FT_RESP) response field definitions: */
|
|
|
|
#define RESP_OK 0x00 /* no error */
|
|
#define RESP_UNKNOWN_ERR 0x01 /* unknown error */
|
|
#define RESP_UNKNOWN_CMD 0x02 /* unrecognised command */
|
|
#define RESP_UNSUPPORTED 0x03 /* unsupported command */
|
|
#define RESP_INVAL_CHAN 0x04 /* invalid channel specified */
|
|
#define RESP_INVAL_DST 0x05 /* invalid destination */
|
|
#define RESP_INVAL_PARAM 0x06 /* invalid parameters */
|
|
#define RESP_INVAL_MSG 0x07 /* invalid message */
|
|
#define RESP_INVAL_LEN 0x08 /* invalid length field */
|
|
#define RESP_TX_FAIL 0x09 /* transmit failed */
|
|
#define RESP_RX_FAIL 0x0a /* receive failed */
|
|
#define RESP_AUTH_FAIL 0x0b
|
|
#define RESP_MEM_ALLOC_ERR 0x0c /* memory allocation error */
|
|
#define RESP_TIMEOUT 0x0d /* command timed out */
|
|
#define RESP_UNAVAILABLE 0x0e
|
|
#define RESP_BUF_FULL 0x0f /* buffer full */
|
|
#define RESP_NO_SUCH_JOB 0x10
|
|
|
|
/* Flight recorder (SD_FLIGHT) target definitions */
|
|
|
|
#define FR_RESP_AFTER_EVENT 0
|
|
#define FR_RESP_AFTER_PERIOD 1
|
|
#define FR_IGNORE_DURING_PER 2
|
|
#define FR_DEACT_AFTER_PER 0x80
|
|
#define FR_DEACT_ON_EVENT 0x40
|
|
#define FR_DELETE 0x20
|
|
#define FR_PERIOD_MSGS 0x10
|
|
|
|
/* Filter data types */
|
|
|
|
#define FILTER_DATA_TYPE_HEADER_FRAME 0x00
|
|
#define FILTER_DATA_TYPE_HEADER 0x01
|
|
#define FILTER_DATA_TYPE_DATA 0x02
|
|
#define FILTER_DATA_TYPE_EXTRA_DATA 0x03
|
|
#define FILTER_EVENT_TYPE_HEADER 0x04
|
|
#define FILTER_EVENT_TYPE_DATA 0x05
|
|
|
|
/* filter flags */
|
|
|
|
#define FILTER_PASS_FLAG 0x01
|
|
#define FILTER_ACTIVE_FLAG 0x02
|
|
|
|
/* Filter and Frame Responder Condition operators */
|
|
|
|
#define BIT_FIELD_CHECK 0
|
|
#define SVALUE_GT 1
|
|
#define SVALUE_GE 2
|
|
#define SVALUE_LT 3
|
|
#define SVALUE_LE 4
|
|
#define VALUE_EQ 5
|
|
#define VALUE_NE 6
|
|
#define UVALUE_GT 7
|
|
#define UVALUE_GE 8
|
|
#define UVALUE_LT 9
|
|
#define UVALUE_LE 10
|
|
#define DIG_LOW_TO_HIGH 11
|
|
#define DIG_HIGH_TO_LOW 12
|
|
#define DIG_TRANSITION 13
|
|
|
|
/* Modes available via CMD_CARD_SET_FILTERING_MODE */
|
|
#define FILTER_OFF_PASS_ALL 3
|
|
#define FILTER_OFF_BLOCK_ALL 4
|
|
#define FILTER_ON 5
|
|
|
|
/* Modes available via CMD_CARD_SET_DEFAULT_FILTER */
|
|
#define DEFAULT_FILTER_BLOCK 0
|
|
#define DEFAULT_FILTER_PASS 1
|
|
|
|
/* Actions available via CMD_CARD_MODIFY_FILTER */
|
|
#define DELETE_FILTER 0
|
|
#define ACTIVATE_FILTER 1
|
|
#define DEACTIVATE_FILTER 2
|
|
|
|
/* Flags to modify how FT_CMD (command) messages are handled */
|
|
/* These values are ORed with FT_CMD and stored in the Frame Header's */
|
|
/* Frame Type field for each response. */
|
|
#define DONT_WAIT_FOR_RESP 0x80
|
|
#define WAIT_FOR_PREV_RESP 0x40
|
|
#define RESPONSE_FLAGS (DONT_WAIT_FOR_RESP | WAIT_FOR_PREV_RESP)
|
|
|
|
|
|
/* Program loader options */
|
|
#define PGM_CONV 1 /* Type of data conversion to perform */
|
|
#define PGM_TYPE 2 /* Type of file */
|
|
#define PGM_BIN 11 /* Binary, no conversion */
|
|
#define PGM_ASCII 12 /* ASCII, convert CR LF to LF */
|
|
#define PGM_PGM 21 /* Executable */
|
|
#define PGM_DATA 22 /* Data */
|
|
|
|
|
|
|
|
|
|
/* IOCTL definitions - comments indicate data size */
|
|
|
|
#define GINIT 0x11100001
|
|
#define GLOOPON 0x11100002
|
|
#define GLOOPOFF 0x11100003
|
|
#define GGETHWTYPE 0x11100004
|
|
#define GGETREG 0x11100005
|
|
#define GSETREG 0x11100006
|
|
#define GGETRXCOUNT 0x11100007
|
|
#define GSETRXCOUNT 0x11100008
|
|
#define GGETTXCOUNT 0x11100009
|
|
#define GSETTXCOUNT 0x1110000a
|
|
#define GGETRXDROP 0x1110000b
|
|
#define GSETRXDROP 0x1110000c
|
|
#define GGETTXDROP 0x1110000d
|
|
#define GSETTXDROP 0x1110000e
|
|
#define GGETRXBAD 0x1110000f
|
|
#define GGETTXBAD 0x11100011
|
|
#define GGETCOUNTS 0x11100013
|
|
#define GGETBLMON 0x11100014
|
|
#define GSETBLMON 0x11100015
|
|
#define GGETERRLEV 0x11100016
|
|
#define GSETERRLEV 0x11100017
|
|
#define GGETBITRATE 0x11100018
|
|
#define GGETRAM 0x11100019
|
|
#define GSETRAM 0x1110001a
|
|
|
|
#define GCANGETBTRS 0x11200001
|
|
#define GCANSETBTRS 0x11200002
|
|
#define GCANGETBC 0x11200003
|
|
#define GCANSETBC 0x11200004
|
|
#define GCANGETMODE 0x11200005
|
|
#define GCANSETMODE 0x11200006
|
|
#define GCANGETTRANS 0x11200009
|
|
#define GCANSETTRANS 0x1120000a
|
|
#define GCANSENDERR 0x1120000b
|
|
#define GCANRGETOBJ 0x11210001
|
|
#define GCANRSETSTDID 0x11210002
|
|
#define GCANRSETEXTID 0x11210003
|
|
#define GCANRSETDATA 0x11210004
|
|
#define GCANRENABLE 0x11210005
|
|
#define GCANRDISABLE 0x11210006
|
|
#define GCANRGETMASKS 0x11210007
|
|
#define GCANRSETMASKS 0x11210008
|
|
#define GCANSWGETMODE 0x11220001
|
|
#define GCANSWSETMODE 0x11220002
|
|
|
|
#define GDLCGETFOURX 0x11400001
|
|
#define GDLCSETFOURX 0x11400002
|
|
#define GDLCGETLOAD 0x11400003
|
|
#define GDLCSETLOAD 0x11400004
|
|
#define GDLCSENDBREAK 0x11400005
|
|
#define GDLCABORTTX 0x11400006
|
|
#define GDLCGETHDRMODE 0x11400007
|
|
#define GDLCSETHDRMODE 0x11400008
|
|
|
|
#define GHONSLEEP 0x11600001
|
|
#define GHONSILENCE 0x11600002
|
|
|
|
#define GKWPSETPTIMES 0x11700011
|
|
#define GKWPSETWTIMES 0x11700010
|
|
#define GKWPDOWAKEUP 0x11700008
|
|
#define GKWPGETBITTIME 0x11700101
|
|
#define GKWPSETBITTIME 0x11700102
|
|
#define GKWPSETNODEADDR 0x11700104
|
|
#define GKWPGETNODETYPE 0x11700105
|
|
#define GKWPSETNODETYPE 0x11700106
|
|
#define GKWPSETWAKETYPE 0x11700108
|
|
#define GKWPSETTARGADDR 0x1170010a
|
|
#define GKWPSETKEYBYTES 0x1170010c
|
|
#define GKWPSETSTARTREQ 0x1170010e
|
|
#define GKWPSETSTARTRESP 0x11700110
|
|
#define GKWPSETPROTOCOL 0x11700112
|
|
#define GKWPGETLASTKEYBYTES 0x11700201
|
|
#define GKWPSETLASTKEYBYTES 0x11700202
|
|
|
|
#define GSCPGETBBR 0x11300001
|
|
#define GSCPSETBBR 0x11300002
|
|
#define GSCPGETID 0x11300003
|
|
#define GSCPSETID 0x11300004
|
|
#define GSCPADDFUNCID 0x11300005
|
|
#define GSCPCLRFUNCID 0x11300006
|
|
|
|
#define GUBPGETBITRATE 0x11800001
|
|
#define GUBPSETBITRATE 0x11800002
|
|
#define GUBPGETINTERBYTE 0x11800003
|
|
#define GUBPSETINTERBYTE 0x11800004
|
|
#define GUBPGETNACKMODE 0x11800005
|
|
#define GUBPSETNACKMODE 0x11800006
|
|
#define GUBPGETRETRYDELAY 0x11800007
|
|
#define GUBPSETRETRYDELAY 0x11800008
|
|
|
|
#define GRESETHC08 0x11800009
|
|
#define GTESTHC08COP 0x1180000A
|
|
|
|
#define GSJAGETLISTEN 0x11250001
|
|
#define GSJASETLISTEN 0x11250002
|
|
#define GSJAGETSELFTEST 0x11250003
|
|
#define GSJASETSELFTEST 0x11250004
|
|
#define GSJAGETXMITONCE 0x11250005
|
|
#define GSJASETXMITONCE 0x11250006
|
|
#define GSJAGETTRIGSTATE 0x11250007
|
|
#define GSJASETTRIGCTRL 0x11250008
|
|
#define GSJAGETTRIGCTRL 0x11250009
|
|
#define GSJAGETOUTSTATE 0x1125000A
|
|
#define GSJASETOUTSTATE 0x1125000B
|
|
#define GSJAGETFILTER 0x1125000C
|
|
#define GSJASETFILTER 0x1125000D
|
|
#define GSJAGETMASK 0x1125000E
|
|
#define GSJASETMASK 0x1125000F
|
|
#define GSJAGETINTTERM 0x11250010
|
|
#define GSJASETINTTERM 0x11250011
|
|
#define GSJAGETFTTRANS 0x11250012
|
|
#define GSJASETFTTRANS 0x11250013
|
|
#define GSJAGETFTERROR 0x11250014
|
|
|
|
/* LIN driver IOCTLs */
|
|
#define GLINGETBITRATE 0x11C00001
|
|
#define GLINSETBITRATE 0x11C00002
|
|
#define GLINGETBRKSPACE 0x11C00003
|
|
#define GLINSETBRKSPACE 0x11C00004
|
|
#define GLINGETBRKMARK 0x11C00005
|
|
#define GLINSETBRKMARK 0x11C00006
|
|
#define GLINGETIDDELAY 0x11C00007
|
|
#define GLINSETIDDELAY 0x11C00008
|
|
#define GLINGETRESPDELAY 0x11C00009
|
|
#define GLINSETRESPDELAY 0x11C0000A
|
|
#define GLINGETINTERBYTE 0x11C0000B
|
|
#define GLINSETINTERBYTE 0x11C0000C
|
|
#define GLINGETWAKEUPDELAY 0x11C0000D
|
|
#define GLINSETWAKEUPDELAY 0x11C0000E
|
|
#define GLINGETWAKEUPTIMEOUT 0x11C0000F
|
|
#define GLINSETWAKEUPTIMEOUT 0x11C00010
|
|
#define GLINGETWUTIMOUT3BR 0x11C00011
|
|
#define GLINSETWUTIMOUT3BR 0x11C00012
|
|
#define GLINSENDWAKEUP 0x11C00013
|
|
#define GLINGETMODE 0x11C00014
|
|
#define GLINSETMODE 0x11C00015
|
|
#define GLINGETSLEW 0x11C00016
|
|
#define GLINSETSLEW 0x11C00017
|
|
#define GLINADDSCHED 0x11C00018
|
|
#define GLINGETSCHED 0x11C00019
|
|
#define GLINGETSCHEDSIZE 0x11C0001A
|
|
#define GLINDELSCHED 0x11C0001B
|
|
#define GLINACTSCHED 0x11C0001C
|
|
#define GLINDEACTSCHED 0x11C0001D
|
|
#define GLINGETACTSCHED 0x11C0001E
|
|
#define GLINGETNUMSCHEDS 0x11C0001F
|
|
#define GLINGETSCHEDNAMES 0x11C00020
|
|
#define GLINSETFLAGS 0x11C00021
|
|
#define GLINGETAUTOCHECKSUM 0x11C00022
|
|
#define GLINSETAUTOCHECKSUM 0x11C00023
|
|
#define GLINGETAUTOPARITY 0x11C00024
|
|
#define GLINSETAUTOPARITY 0x11C00025
|
|
#define GLINGETSLAVETABLEENABLE 0x11C00026
|
|
#define GLINSETSLAVETABLEENABLE 0x11C00027
|
|
#define GLINGETFLAGS 0x11C00028
|
|
#define GLINGETWAKEUPMODE 0x11C00029
|
|
#define GLINSETWAKEUPMODE 0x11C0002A
|
|
#define GLINGETMASTEREVENTENABLE 0x11C0002B /* 1 */
|
|
#define GLINSETMASTEREVENTENABLE 0x11C0002C /* 1 */
|
|
#define GLINGETNSLAVETABLE 0x11C0002D /* 1 get number of slave table entries */
|
|
#define GLINGETSLAVETABLEPIDS 0x11C0002E /* 1 + n get list of slave table PIDs */
|
|
#define GLINGETSLAVETABLE 0x11C0002F /* var., 4 + n */
|
|
#define GLINSETSLAVETABLE 0x11C00030 /* var., 4 + n */
|
|
#define GLINCLEARSLAVETABLE 0x11C00031 /* 1 */
|
|
#define GLINCLEARALLSLAVETABLE 0x11C00032 /* 0 */
|
|
#define GLINGETONESHOT 0x11C00033 /* var., 4 + n */
|
|
#define GLINSETONESHOT 0x11C00034 /* var., 4 + n */
|
|
#define GLINCLEARONESHOT 0x11C00035 /* 0 */
|
|
|
|
/* delay driver (real-time scheduler) IOCTLs */
|
|
#define GDLYGETHIVALUE 0x11D50001 /* 4 */
|
|
#define GDLYSETHIVALUE 0x11D50002 /* 4 set the high water value */
|
|
/* 2 bytes - stream number */
|
|
/* 2 bytes - high water value */
|
|
|
|
#define GDLYGETLOVALUE 0x11D50003 /* 4 */
|
|
#define GDLYSETLOVALUE 0x11D50004 /* 4 set the low water value */
|
|
/* 2 bytes - stream number */
|
|
/* 2 bytes - low water value */
|
|
|
|
#define GDLYGETHITIME 0x11D50005 /* 4 */
|
|
#define GDLYSETHITIME 0x11D50006 /* 4 set the high water time */
|
|
/* 2 bytes - stream number */
|
|
/* 2 bytes - high water time (ms) */
|
|
|
|
#define GDLYGETLOTIME 0x11D50007 /* 4 */
|
|
#define GDLYSETLOTIME 0x11D50008 /* 4 set the low water time */
|
|
/* 2 bytes - stream number */
|
|
/* 2 bytes - low water time (ms) */
|
|
|
|
#define GDLYGETLOREPORT 0x11D50009 /* 4 get the low water report flag */
|
|
/* 2 bytes - stream number */
|
|
/* 2 bytes - 1: report when low */
|
|
/* 0: do not report when low*/
|
|
|
|
#define GDLYFLUSHSTREAM 0x11D5000A /* 2 flush the delay buffer */
|
|
/* 2 bytes - stream number */
|
|
|
|
#define GDLYINITSTREAM 0x11D5000B /* 2 set default hi & lo water marks*/
|
|
/* 2 bytes - stream number */
|
|
|
|
#define GDLYPARTIALFLUSHSTREAM 0x11D5000C /* 4 flush the delay buffer */
|
|
/* 2 bytes - stream number */
|
|
/* 2 bytes - data to retain in ms */
|
|
|
|
|
|
#define GINPGETINP 0x11500001
|
|
#define GINPGETLATCH 0x11500002
|
|
#define GINPCLRLATCH 0x11500003
|
|
#define GOUTGET 0x11510001
|
|
#define GOUTSET 0x11510002
|
|
#define GOUTSETBIT 0x11510003
|
|
#define GOUTCLEARBIT 0x11510004
|
|
#define GPWRGETWHICH 0x11520001
|
|
#define GPWROFF 0x11520002
|
|
#define GPWROFFRESET 0x11520003
|
|
#define GPWRRESET 0x11520004
|
|
|
|
|
|
/* Hardware / driver TYPE and SUBTYPE definitions */
|
|
|
|
#define GDUMMY 0x01 /* Dummy device driver TYPE */
|
|
#define GDGDMARKONE 0x01 /* Dummy device driver SUBTYPE */
|
|
|
|
#define GCAN 0x02 /* CAN TYPE */
|
|
#define G82527 0x01 /* 82527 SUBTYPE */
|
|
#define GSJA1000 0x02 /* SJA1000 SUBTYPE */
|
|
#define G82527SW 0x03 /* 82527 single wire subtype */
|
|
#define G82527ISO11992 0x04 /* 82527 ISO11992 subtype */
|
|
#define G82527_SINGLECHAN 0x05 /* 82527 single channel */
|
|
#define G82527SW_SINGLECHAN 0x06 /* 82527 single wire single channel */
|
|
#define G82527ISO11992_SINGLECHAN 0x07 /* 82527 ISO11992 single channel */
|
|
#define GSJA1000FT 0x10 /* SJA1000 Fault Tolerant subtype */
|
|
#define GSJA1000C 0x11 /* SJA1000 Compact subtype */
|
|
#define GSJA1000FT_FO 0x12 /* SJA1000 single chsnnel Fault Tolerant subtype */
|
|
#define GSJA1000_BEACON_CANFD 0x1a /* SJA1000 BEACON CAN-FD subtype */
|
|
#define GSJA1000_BEACON_SW 0x1b /* SJA1000 BEACON CAN single wire subtype */
|
|
#define GSJA1000_BEACON_FT 0x1c /* SJA1000 BEACON CAN Fault Tolerant subtype */
|
|
|
|
#define GJ1850 0x03 /* 1850 TYPE */
|
|
#define GHBCCPAIR 0x01 /* HBCC SUBTYPE */
|
|
#define GDLC 0x02 /* GM DLC SUBTYPE */
|
|
#define GCHRYSLER 0x03 /* Chrysler SUBTYPE */
|
|
#define GDEHC12 0x04 /* DE HC12 KWP/BDLC SUBTYPE */
|
|
|
|
#define GKWP2000 0x04 /* Keyword protocol 2000 TYPE */
|
|
#define GDEHC12KWP 0x01 /* DE HC12 KWP/BDLC card SUBTYPE */
|
|
|
|
#define GHONDA 0x05 /* Honda UART TYPE */
|
|
#define GDGHC08 0x01 /* DG HC08 SUBTYPE */
|
|
|
|
#define GFORDUBP 0x06 /* FORD UBP TYPE */
|
|
#define GDGUBP08 0x01 /* DG HC08 SUBTYPE */
|
|
|
|
#define GSCI 0x09 /* Chrysler SCI TYPE */
|
|
#define G16550SCI 0x01 /* 16550 type UART based card SUBTYPE */
|
|
|
|
#define GCCD 0x0a /* Chrysler C2D TYPE */
|
|
#define G16550CDP68HC68 0x01 /* 16550 / CDP68HC68S1 card SUBTYPE */
|
|
|
|
#define GLIN 0x0b /* LIN TYPE */
|
|
#define GDGLIN08 0x01 /* DG HC08 SUBTYPE */
|
|
#define GDGLIN_BEACON 0x03 /* DG BEACON LIN SUBTYPE */
|
|
|
|
typedef struct {
|
|
guint32 cmd;
|
|
guint32 cmd_context; //typically just guint8, but let's room for expansion/improvement
|
|
guint32 ioctl_command; //should be more generic, but IOCTL is currently the only user
|
|
guint32 req_frame_num;
|
|
guint32 rsp_frame_num;
|
|
nstime_t req_time;
|
|
} gryphon_pkt_info_t;
|
|
|
|
/* List contains request data */
|
|
typedef struct {
|
|
wmem_list_t *request_frame_data;
|
|
} gryphon_conversation;
|
|
|
|
|
|
/*
|
|
* Editor modelines - https://www.wireshark.org/tools/modelines.html
|
|
*
|
|
* Local variables:
|
|
* c-basic-offset: 4
|
|
* tab-width: 8
|
|
* indent-tabs-mode: nil
|
|
* End:
|
|
*
|
|
* vi: set shiftwidth=4 tabstop=8 expandtab:
|
|
* :indentSize=4:tabSize=8:noTabs=true:
|
|
*/
|