The attached patch to packet-bfd.c adds the following enhancements to BFD
decoding:
- The Authentication Section is now decoded. All of the authentication methods
are supported. Verification of checksums is not implemented.
- BFD flags are now shown in a tree
- Added support for the M flag
- Added a display filter for the message length
- For the Desired Min TX Interval, Required Min RX Interval, and Required Min
Echo RX Interval fields, the time value is now printed in both milliseconds and
microseconds. (Previously, only milliseconds was being shown.) The PDU
represents the time in microseconds, but most implementations deal in
milliseconds.
- Added a warning to flag the packet if the Authentication bit is set, but the
full Authentication Section is not present.
- Added descriptions for most of the fields
- Fix the name of the protocol. BFD stands for Bidirectional Forwarding
Detection and not Bi-directional Fault Detection.
- Register the protocol on the UDP multihop port (4784).
- Change the filter name for the protocol from bfdcontrol to bfd since all of
the other display filters started with bfd.
Removed unused hf_bfd_auth_checksum.
Modified printing of the ':' at the end of the Authentication tree.
svn path=/trunk/; revision=22825
> The included patch fixes BFD version detection in the BFD packet
> dissector and extends it to correctly dissect version 1 packets. The
> Authentication Section part of the packet is still not dissected.
>
svn path=/trunk/; revision=17357
Also move ncp222.py, x11-fields, process-x11-fields.pl,
make-reg-dotc, and make-reg-dotc.py.
Adjust #include lines in files that include packet-*.h
files.
svn path=/trunk/; revision=11410
Bill Meier