Some of the ASN.1 dissectors still generate a new_create_dissector_handle from the tool itself, so leave those for now.
Change-Id: Ic6e5803b1444d7ac24070949f5fd557909a5641f
Reviewed-on: https://code.wireshark.org/review/12484
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Calling a protocol dissection function will properly set/restore pinfo->current_proto, so there's no need to duplicate it.
Change-Id: Ic2ec0b35fa4d46a98f3410bf238056425076e4a9
Reviewed-on: https://code.wireshark.org/review/12205
Reviewed-by: Michael Mann <mmann78@netscape.net>
Picking off "easy" dissectors that only have one or two exit points at most.
Change-Id: Ie514f126352e7598acc4f7c38db9c61d105d5e48
Reviewed-on: https://code.wireshark.org/review/11850
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
The target here is the Decode As dialog where protocols have multiple registrations into a dissector table and that shows up as multiple entries in the Decode As dialog list with the same name so users are unsure which "dissector" they are choosing.
The "default" behavior (done in this commit) is to not allow duplicates for a dissector table, whether its part of Decode As or not. It's just ENFORCED for Decode As.
Bug: 3949
Change-Id: Ibe14fa61aaeca0881f9cc39b78799e314b5e8127
Reviewed-on: https://code.wireshark.org/review/11405
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Michael Mann <mmann78@netscape.net>
The preferences are still supported for backwards compatibility, but the heuristic_protos file has final say on the "preference" to enable/disable a heuristic dissector.
Also add parameter to heur_dissector_add() for the "default" enable/disable of a heuristic dissector. With this parameter, a few more (presumably weak) heuristic dissectors have been "registered" but of course default to being disabled.
Change-Id: I51bebb2146ef3fbb8418d4f5c7f2cb2b58003a22
Reviewed-on: https://code.wireshark.org/review/9610
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Roland Knall <rknall@gmail.com>
Reviewed-by: Hadriel Kaplan <hadrielk@yahoo.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This allows better presentation of heuristic dissectors to the end user.
Change-Id: I2ff3985ab914e83c2989880cc0c7b9904045b3f6
Reviewed-on: https://code.wireshark.org/review/9602
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This patch adds reassembly_table_destroy calls as cleanup function for
dissectors which have a simple init routine that just calls
reassembly_table_init (comments are ignored).
The changes were automatically generated using
https://git.lekensteyn.nl/peter/wireshark-notes/diff/one-off/cleanup-rewrite.py?id=4cc0aec05dc67a51926a045e1955b7a956757b5e
(with the if and assignment parsers disabled).
The only difference from the autogenerated output is that the XXX
comments from the init routines in smb-pipe and tds dissectors are kept.
Change-Id: I64aedf7189877247282b30b0e0f83757be6199e7
Reviewed-on: https://code.wireshark.org/review/9222
Reviewed-by: Michael Mann <mmann78@netscape.net>
Specifically:
- Set packet.h to be the first wireshark #include after
config.h and "system" #includes.
packet.h added as an #include in some cases when missing.
- Remove some #includes included (directly/indirectly) in
packet.h. E.g., glib.h.
(Done only for those files including packet.h).
- As needed, move "system" #includes to be after config.h and
before wireshark #includes.
- Rework various #include file specifications for consistency.
- Misc.
Change-Id: Ifaa1a14b50b69fbad38ea4838a49dfe595c54c95
Reviewed-on: https://code.wireshark.org/review/5923
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Bill Meier <wmeier@newsguy.com>
Change-Id: I6d3125f15d268edd47ef74dd655eb86cb25ee52d
Reviewed-on: https://code.wireshark.org/review/5047
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
So just use crc16_x25_ccitt_tvb(), which goes a byte at a time rather
than a bit at a time, and which takes a tvbuff rather than requiring you
to call tvb_get_ptr().
It also doesn't 1's-complement the result, so we can compare it against the
0x1D0F in ETSI TS 102 821 V1.4.1 (2012-10) rather than against a
1's-complement version, 0xE2F0.
Change-Id: Ia513f851f0a8ff1e7853278ddf3618c532fb2aba
Reviewed-on: https://code.wireshark.org/review/3507
Reviewed-by: Guy Harris <guy@alum.mit.edu>
All caught by cppcheck. The two (semi)-interesting bugs are:
- in asn1/atn-cpdlc/packet-atn-cpdlc-template.c where the break statement should
have been inside the brace, causing potential control-flow weirdness with
exceptions
- in epan/dissectors/packet-ieee80211.c where the bounds check for tag_len did
not match the expert info given
Change-Id: Ie173fb8d917aabb9b4571435d671d6f16e1c7569
Reviewed-on: https://code.wireshark.org/review/1793
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Evan Huus <eapache@gmail.com>
(Using sed : sed -i '/^ \* \$Id\$/,+1 d')
Fix manually some typo (in export_object_dicom.c and crc16-plain.c)
Change-Id: I4c1ae68d1c4afeace8cb195b53c715cf9e1227a8
Reviewed-on: https://code.wireshark.org/review/497
Reviewed-by: Anders Broman <a.broman58@gmail.com>
be done on flows from one address to another; reassembly for protocols
running atop TCP should be done on flows from one TCP endpoint to
another.
We do this by:
adding "reassembly table" as a data structure;
associating hash tables for both in-progress reassemblies and
completed reassemblies with that data structure (currently, not
all reassemblies use the latter; they might keep completed
reassemblies in the first table);
having functions to create and destroy keys in that table;
offering standard routines for doing address-based and
address-and-port-based flow processing, so that dissectors not
needing their own specialized flow processing can just use them.
This fixes some mis-reassemblies of NIS YPSERV YPALL responses (where
the second YPALL response is processed as if it were a continuation of
a previous response between different endpoints, even though said
response is already reassembled), and also allows the DCE RPC-specific
stuff to be moved out of epan/reassembly.c into the DCE RPC dissector.
svn path=/trunk/; revision=48491
The reassembled fragments tree in the Packet Details view is awesome, but it
lacks one thing: a field that exposes the reassembled data.
tcp.data already exists for exposing a single TCP segment's payload as a byte
array. It would be handy to have something similar for a single application
layer PDU when TCP segment reassembly is involved. I propose
tcp.reassembled.data, named and placed after the already existing field
tcp.reassembled.length.
My primary use case for this feature is outputting tcp.reassembled.data with
tshark for further processing with a script.
The attached patch implements this very feature. Because the reassembled
fragment tree code is general purpose, i.e. not specific to just TCP, any
dissector that relies upon it can add a similar field very cheaply. In that
vein I've also implemented ip.reassembled.data and ipv6.reassembled.data, which
expose reassembled fragment data as a single byte stream for IPv4 and IPv6,
respectively. All other protocols that use the reassembly code have been left
alone, other than inserting NULL into their initializer lists for the newly
introduced struct field reassemble.h:fragment_items.hf_reassembled_data.
svn path=/trunk/; revision=44802
Don't try to reassemble a message of length 0 (fixes a later divide-by-zero
error but I don't see why we'd want to do any work for message whose length
we think is 0).
svn path=/trunk/; revision=44247
1. If there's no character encoding (ENC_ASCII, ...) specified
then use ENC_ASCII.
2. For all but FT_UINT_STRING, always use ENC_NA
(replacing any existing True/1/FALSE/0
/ENC_BIG_ENDIAN/ENC_LITTLE_ENDIAN).
svn path=/trunk/; revision=39426
FT_NONE
FT_BYTES
FT_IPV6
FT_IPXNET
FT_OID
Note: Encoding field set to ENC_NA only if the field was previously TRUE|FALSE|ENC_LITTLE_ENDIAN|ENC_BIG_ENDIAN
svn path=/trunk/; revision=39260
Michael Mann