This is the begin of a basic dissection of the proprietary protocol used
by the Mitel OMM/RFP communicatino over TCP. Currently no decryption is
supported so there is the need of external decryption.
The ETH protocol has an two byte field that is only used when
transported over RAW Ethernet and a length indicator in that case.
Those two fields are not present if the ETH protocol is encapsulated
in the OMM/RFP communication protocol.
To make this dissector also useable when used after dissecting
DECT-MITEL-RFP distinguishing between both packet structures has
been included.
The wmem_strbuf_new_label() creates a new buffer with a length limit
in octets. With multibyte strings this is likely to generate invalid
UTF-8 errors.
Remove the artificial limit on the value size. The
function proto_tree_add_string() sets the value, and truncating
that to an arbitrary limit is not really correct.
The display label will be truncated to a preset length by the UI.
This mechanism uses ws_label_strcpy() and is designed to avoid
the invalid truncation.
While here use wmem_strbuf_get_str() instead of wmem_strbuf_finalize().
Accepted best practice is to let the scope free the memory.
Removing the finalize call avoids an unnecessary realloc.
Fixes#18653.
For signed exponential Golomb, fix a typo when testing if
value was even or odd that resulted in a no-op. This was
mapping all overflows to G_MININT32 instead of half of them
to G_MAXINT32.
Use tvb_new_octet_aligned when adding addresses (strings or bytes)
that are not byte aligned. That is not only clearer code, but also
prevents attempting to add unvalidated strings.
Since we're aligning the fields properly, get rid of the extra
fields for the MSB of the first field and LSB of the last field.
Fix#18664
qcustomplot.cpp:34001:37: warning: The left operand of '-' is a garbage value [core.UndefinedBinaryOperatorResult]
qcustomplot.cpp:34001:37: warning: The right operand of '-' is a garbage value [core.UndefinedBinaryOperatorResult]
(ported from commit a0328bdb03)
qcustomplot.cpp:26643:9: warning: 1st function call argument is an uninitialized value [core.CallAndMessage]
qcustomplot.cpp:27752:11: warning: 1st function call argument is an uninitialized value [core.CallAndMessage]
qcustomplot.cpp:27779:11: warning: 1st function call argument is an uninitialized value [core.CallAndMessage]
qcustomplot.cpp:34087:7: warning: 2nd function call argument is an uninitialized value [core.CallAndMessage]
(ported from commit 075ee9138a)
qcustomplot.cpp:22400:17: warning: The left operand of '>' is a garbage value [core.UndefinedBinaryOperatorResult]
qcustomplot.cpp:22400:17: warning: The right operand of '>' is a garbage value [core.UndefinedBinaryOperatorResult]
qcustomplot.cpp:35170:17: warning: The left operand of '>' is a garbage value [core.UndefinedBinaryOperatorResult]
qcustomplot.cpp:35170:17: warning: The right operand of '>' is a garbage value [core.UndefinedBinaryOperatorResult]
(ported from commit 6fd4188804)
Warning triggered using AppleClang 11.0.0.
/Users/buildslave/builds/UfJL1hoT/0/wireshark/wireshark/ui/qt/widgets/qcustomplot.cpp:16020:17: error: HTML tag 'tt' requires an end tag [-Werror,-Wdocumentation-html]
parameter as <tt>QVariant(\ref QCPDataSelection)</tt>. All plottables that weren't touched by \a
~^~~
1 error generated.
(ported from commit 6d2aea45e4)
(ported from commit 3903740534)
QCustomPlot's adaptive sampling decimates the data to be plotted based
on the screen resolution. Specifically, if many data points fit within
the same pixel on the X (key) axis, then QCustomPlot attempts to plot
only the min value, the max value, and a few values in-between to
maintain a good "density" on the Y (value) axis.
The density QCustomPlot wants is about one datapoint for every 4 pixels
covered by the value range of a single X (key) pixel. Unfortunately,
this calculation is flawed if all values also fit within a single pixel
on the Y (value) axis - so this change fixes that bug.
(cherry picked from commit 92e652ebfa)
Starting with Qt 5.10 (our earliest supported version),
Qt has a qsizetype (alias of ssize_t) that functions
like size() and indexOf() return. On clang that does not
have the same size as an int, so cast it away in a number
of places.
RFC 3261 does not put a limit on the maximum size of Call-ID.
(Some implementations do, such as at 256 bytes.) Truncating
it can produce invalid UTF-8 if there's also errors that
turn into UTF-8 replacement characteres.
A reduced size is still used for the hash table lookup.
Add an expert info warning if Call-ID is missing, as it's
a mandatory field.
Fix#18620.
Instead of using tvb_get_bits and proto_tree_add_uint,
use a bitmask in the field info and proto_tree_add_item.
This means that when epan/print.c writes PDML or JSON,
the value written is the correctly masked value (PDML also
includes the unmasked value.)
When proto_tree_add_uint is used, the value written to
PDML and JSON is the original value from the packet buffer,
not properly shifted.
Using a bitmask in the field definition allows us to use
proto_tree_add_item, which means that when print.c writes
PDML and JSON, the value written is the correctly masked
value (PDML also includes the unmasked value.)
When functions like proto_tree_add_uint are used instead,
the value written to PDML and JSON is the original value
from the packet buffer, not properly shifted.
Instead of using tvb_get_bits32 and proto_tree_add_uint,
use a bitmask in the field info and proto_tree_add_item.
This means that when epan/print.c writes PDML or JSON,
the value written is the correctly masked value (PDML also
includes the unmasked value.)
When proto_tree_add_uint is used, the value written to
PDML and JSON is the original value from the packet buffer,
not properly shifted.
It's possible, in the case of errors, for the result of
g_uri_unescape_string not to be valid UTF-8, either if originally
some other encoding was percent-encoded, or if there were errors.
Check for it.
Fix#18658.
Rename flex macros using parenthesis (mostly a style issue):
DIAG_OFF_FLEX -> DIAG_OFF_FLEX()
DIAG_ON_FLEX -> DIAG_ON_FLEX()
Use the same kind of construct with lemon generated code using
DIAG_OFF_LEMON() and DIAG_ON_LEMON(). Use %include and %code
directives to enforce the desired order with generated code
in the middle in between pragmas.
Fix a clang-specific pragma to use DIAG_OFF_CLANG().
DIAG_OFF(unreachable-code) -> DIAG_OFF_CLANG(unreachable-code).
Apparently GCC is ignoring the -Wunreachable flag, that's why
it did not trigger an unknown pragma warning. From [1}:
The -Wunreachable-code has been removed, because it was unstable: it
relied on the optimizer, and so different versions of gcc would warn
about different code. The compiler still accepts and ignores the
command line option so that existing Makefiles are not broken. In some
future release the option will be removed entirely. - Ian
[1] https://gcc.gnu.org/legacy-ml/gcc-help/2011-05/msg00360.html
Bernhard Dick