Remember which interfaces were selected for the next capture and restore
the selection (note that only active capture devices are stored in
"ifaces", so simply querying that list does not work).
The original change tried to fix duplicate devices (which were added
from "ifaces" to "all_ifaces") by clearing "ifaces", this patch tries to
fix that by ignoring all non-PIPE devices while preserving "ifaces".
Now after refreshing the interfaces list in Qt, the selection in the
Manage Interfaces dialog is preserved. Removal of the bluetooth0
interface+refresh does hide the interface. Read+refresh does add the
interface (and preserve the selected state).
Change-Id: I26a78982f0327c835dc96da9c813e38f31d6cd3d
Fixes: v1.99.0-rc1-879-g55733ea170 ("fix scan_local_interfaces()")
Reviewed-on: https://code.wireshark.org/review/20477
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
/home/jmayer/work/wireshark/git/ui/qt/manage_interfaces_dialog.cpp:273:33: error: variable ‘link_type_name’ set but not used [-Werror=unused-but-set-variable]
By commenting out all lines using this variable for now.
Change-Id: I8f074b24f86ee2063fc545cabd99d446b31a06ec
Reviewed-on: https://code.wireshark.org/review/20616
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
Change-Id: Ice643361e91bded91547428d7fbb7cdff969664f
Reviewed-on: https://code.wireshark.org/review/20383
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Disable the "Show hidden interface" option until bug 13354 is fixed
because it's not possible to capture from hidden interfaces yet.
Ping-Bug: 13354
Change-Id: I428c2698485f0c7c2d9a8ab8408d7129af5fecf1
Reviewed-on: https://code.wireshark.org/review/20528
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Match the style used in "Capture Interfaces" table when elements
are N/A by using the em dash. This item should also be disabled
using QPalette::Disabled to get a even better match.
Change-Id: I127ce309318df2c36515996df8584d1e4ce690c0
Reviewed-on: https://code.wireshark.org/review/20527
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
When marking a previously hidden device as default (e.g. via wireshark
-ocapture.device:eth0), an unchecked checkbox is visible. This is just
confusing, just hide the checkbox completely.
Change-Id: I3f85cfcb659c351c72237dced52f0684733188c4
Reviewed-on: https://code.wireshark.org/review/20478
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Roland Knall <rknall@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Set focus to the discard button in the "Unsaved packet" and
"Unsaved comments" dialogs to enable spacebar for discard and
enter for save.
Bug: 13363
Change-Id: I576b02c4e3f0964aef56a0f1c06ed57c6ba683bf
Reviewed-on: https://code.wireshark.org/review/20485
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Change-Id: I14fc19f131782a9c85104ca2189b9452079d0013
Reviewed-on: https://code.wireshark.org/review/20454
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Deleting a IO graph item while editing a field will use the IOGraph
object so ensure we delete in correct order to avoid heap-use-after-free.
Bug: 13234
Change-Id: I6d0de21684f842fbd67c9b38fc6b75b81aec5518
Reviewed-on: https://code.wireshark.org/review/20456
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Change-Id: Ifaf25ca5a7974f1d398ceebbb4c6733d4d3e001a
Reviewed-on: https://code.wireshark.org/review/20006
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
When selecting a display filter from the bookmark list this filter
should be applied, because that's the most common action for a user.
Holding down the the Alt key will only prepare the filter.
Change-Id: I567ee8a2a70a3de07fea33fa5763d9efba591de3
Reviewed-on: https://code.wireshark.org/review/20317
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Allow the enable/disable of an element
Change-Id: I9652e8d74b261ba259cebfba53e7bc7ef560d347
Reviewed-on: https://code.wireshark.org/review/20370
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Use bitwise AND to check if a modifier bit is set.
Also changed from MetaModifier to AltModifier to match the comment
and the modifier key used in "Next/Previous Packet in History".
Change-Id: I89072a1dfdd14a2beb7344a672cbc18a3ace8924
Reviewed-on: https://code.wireshark.org/review/20359
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Strip some padding from the main welcome screen and lower the minimum
width to allow the window to be shrinked. Even when a capture file was
open, the minimum dimensions from the main welcome screen would apply.
The minimum dimensions on Arch Linux with Qt 5.8.0-5 and Plasma 5.9.2
(with the default Breeze theme) for a window have changes as follows:
- main screen/pcap loaded: 746x626 -> 702x590
- with search bar opened: 826x658 -> 826x622
(These numbers exclude 35x10 window decoration.)
Change-Id: Iccc43ee55803abb8105c0d9664368aab09e8cfcf
Reviewed-on: https://code.wireshark.org/review/20343
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Allow to add and remove single items from a selector list and also
fixing the selection of items in a selector list
Change-Id: I0c69ea97db6ca1a6932939f0df9049c6fb720f77
Reviewed-on: https://code.wireshark.org/review/20363
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Add the ability to move back and forth in the packet selection history
similar to GTK+. Update the documentation accordingly.
Change-Id: If1fdc1e59b240c0588c292dc0f7f0a5f083c30e1
Reviewed-on: https://code.wireshark.org/review/20320
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Even if a packet has only one or two lines for the byte view, Qt
autoresizing insists to require a minimum of 5.5 lines (or 7.5 lines for
packets without multiple data sources). Remove this artificial
requirement and allow the packet bytes view to be resized to show
nothing (except for possible data sources tabs).
This makes it easier to fit more packets and details for screenshots.
Change-Id: I3ea997b9effa8292b396dc2ceb2ab1c35cead410
Reviewed-on: https://code.wireshark.org/review/20342
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Fix some warnings when building with -Wshorten-64-to-32 flag for
C++ code.
Fixes for warnings from QList, QTimer and QVector has been pushed
upstream, so some time we may be able to enable this flag for C++.
Change-Id: Iae7457f9afc469c63f3edbe23dbf272b5c6c9e5e
Reviewed-on: https://code.wireshark.org/review/20310
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
The "Compile BPFs" and "Start" buttons need to be enabled and disabled
at the same time and according to the same criteria. Make sure we do so.
Change-Id: I708886564dcf569cd71f936119195209ef6dcbd5
Reviewed-on: https://code.wireshark.org/review/20265
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Change-Id: Ie75da8de308a5fe3a063cf929d0bb2ab739ad96f
Reviewed-on: https://code.wireshark.org/review/20276
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: I9781fea02e7578f7d940c050a6f405bfe4b347dd
Reviewed-on: https://code.wireshark.org/review/20278
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
get enabled if the user had selected a file (and mustexist=true wasn't specified).
This commit also contains minor fixes to doc/README.extcap, it's now more aligned to the
actual implementation.
Added example usage of fileselect, radio and multiselect to doc/extcap_example.py.
Change-Id: Ibfe40a35a26f49322fbe64c0594506a2163f7e20
Reviewed-on: https://code.wireshark.org/review/20274
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Calling cleanup() twice (via exit signal and via destructor) results in a
use-after-free on exit via write_profile_recent.
This reverts commit e47f9fbeb0.
Change-Id: Ic3ca0742c03a345fd8cb7f3f782942872a3057f5
Reviewed-on: https://code.wireshark.org/review/20273
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Replace occurrences of "n/a" with an em dash. It matches what we do
elsewhere and reduces the need for translation.
Change-Id: Ib5b63be765b7da9ae3e66ab19bd25cb497fd722d
Reviewed-on: https://code.wireshark.org/review/20267
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Remove whitespace to match coding style used in file.
Change-Id: I4c1649aa02087cd39b2f516db6e40749899c5125
Reviewed-on: https://code.wireshark.org/review/20260
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Creates an interface for plugins and other parts of the code, to
add a new toolbar to the system and have various widget types interact
with this toolbar.
All toolbars added via this interface, will be added to an additional
submenu called "Additional Toolbars" within Wireshark.
Also a demo plugin is being provided, demonstrating various features
of the toolbar, including updating the gui elements. It also demonstrates
how to update toolbar items.
Change-Id: I8d0351224b3d7f4b90220d58970b51695551d7e3
Reviewed-on: https://code.wireshark.org/review/19803
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
This allow the correct cleanup routine to be called both when user
exits and when application exits by itself (like in WIRESHARK_QUIT_AFTER_CAPTURE=1).
Change-Id: I88e468bde029b4247ac90616f3aba0065a2b8e00
Reviewed-on: https://code.wireshark.org/review/20210
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Reduce the number of storage arrays and the number
of necessary loads. Also include cleaner methods for
reloading the interfaces and cleanly reload if asked by
the overall system
Change-Id: I529465ec2593d40c955c6cdeaf3a85e3021c0596
Reviewed-on: https://code.wireshark.org/review/20230
Petri-Dish: Roland Knall <rknall@gmail.com>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Calling adjustSize() on the display filter toolbar causes flicker
in the filter expression toolbar when switching between profiles
without buttons and in some cases changing to a profile without buttons.
Only calling adjustSize() if adding buttons should be fine to avoid
this issues, even if they may be caused by something else.
Change-Id: I8cca84a51dbbc8244dc4342ac0466e35884c294d
Reviewed-on: https://code.wireshark.org/review/20222
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
