A number of protocols have IDs that can be reused that are used as
lookup keys. In most cases the frame number should be used as well
to differentiate repeat appearances of an ID. For response/request
matching, it is frequently useful to find the most recent frame number
(greatest value less than or equal to the current one) that contained
an ID.
We can achieve that by using a multimap that stores values with a given
ID in a tree keyed with the frame number. This works better than using
a map or a tree alone:
1) A map isn't ordered, so doesn't allow for less than or equal comparison.
2) Using a tree requires an ordering on all the ID components, and then
having to test all the components other than the frame number separately
for equality after retrieval.
Currently the multimap does not support inserting items without specifying
the tree key (and having the multimap generate a key), because the total
capacity of trees (including deleted nodes) is not tracked. If other use
cases are needed, this could be added later along with more generic
multimap support.
Use a multimap in ANSI MAP, ANSI TCAP, and GSM SMS, all of which need to
match lookup IDs that can be reused. Fix#7653.
Part 1/2 as the commits were too big for CI.
Largely find/replace, with a few manual tweaks. Then regenerate the asn1
dissector sources and make sure everything still builds. There are a
handful of cases I skipped as too complex, but this covers most of the
asn1 dissectors.
Use the new stat_tap_find_table function during init to check if our
statistics table already exists.
If so, we can safely assume that its rows have already beend initialized.
All we have to do is clear the data that was collected by the tap.
Add some ENC_ values for various flavors of packed BCD, and use that
instead of explicitly calling tvb_bcd_dig_to_wmem_packet_str() and
adding the result.
Change-Id: I07511d9d09c9231b610c121cd6ffb3b16fb017a9
Reviewed-on: https://code.wireshark.org/review/36952
Reviewed-by: Guy Harris <gharris@sonic.net>
Fixed a few instances where fix were obvious, others are
less clear.
The check in proto.c is protected by ENABLE_CHECK_FILTER.
Change-Id: I4edee4e67bd53bbf2eb809d68c87983a7c5a66f3
Reviewed-on: https://code.wireshark.org/review/36645
Reviewed-by: Martin Mathieson <martin.r.mathieson@googlemail.com>
Change all wireshark.org URLs to use https.
Fix some broken links while we're at it.
Change-Id: I161bf8eeca43b8027605acea666032da86f5ea1c
Reviewed-on: https://code.wireshark.org/review/34089
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This allows taps that can fail to report an error and fail; a failed
tap's packet routine won't be called again, so they don't have to keep
track of whether they've failed themselves.
We make the return value from the packet routine an enum.
Don't have a separate type for the per-packet routine for "follow" taps;
they're expected to act like tap packet routines, so just use the type
for tap packet routines.
One tap packet routine returned -1; that's not a valid return value, and
wasn't one before this change (the return value was a boolean), so
presume the intent was "don't redraw".
Another tap routine's early return, without doing any work, returned
TRUE; this is presumably an error (no work done, no need to redraw), so
presumably it should be "don't redraw".
Clean up some white space while we're at it.
Change-Id: Ia7d2b717b2cace4b13c2b886e699aa4d79cc82c8
Reviewed-on: https://code.wireshark.org/review/31283
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Make the time stamp precision a 4-bit bitfield, so, when combined with
the other bitfields, we have 32 bits. That means we put the flags at
the same structure level as the time stamp precision, so they can be
combined; that gets rid of an extra "flags." for references to the flags.
Put the two pointers next to each other, and after a multiple of 8 bytes
worth of other fields, so that there's no padding before or between them.
It's still not down to 64 bytes, which is the next lower power of 2, so
there's more work to do.
Change-Id: I6f3e9d9f6f48137bbee8f100c152d2c42adb8fbe
Reviewed-on: https://code.wireshark.org/review/31213
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
There are no "old" versions of them that we're keeping around.
Change-Id: I3c76a14d0ec1a06df39c547da37f4dea9987df4d
Reviewed-on: https://code.wireshark.org/review/25892
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Rename range_foreach_r() to range_foreach(), getting rid of the old
range_foreach().
If your callback doesn't require an additional argument, just pass NULL
when calling range_foreach(), and declare the argument as unused.
Change-Id: I49a56f90610e39cf2ddc398c9e30ed11a6ca90db
Reviewed-on: https://code.wireshark.org/review/23025
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change-Id: Id749c41947c6300f2c82ed947352c336f9e45b72
Reviewed-on: https://code.wireshark.org/review/19838
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This is mostly to address memory leaks in range preferences (the biggest
user of range functionality) on shutdown.
Now range preferences must use epan scoped memory when referencing
internal preference structures to keep consistency.
Change-Id: Idc644f59b5b42fa1d46891542b53ff13ea754157
Reviewed-on: https://code.wireshark.org/review/19387
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Have all dissector tables have a "supports Decode As" flag, which
defaults to FALSE, and which is set to TRUE if a register_decode_as()
refers to it.
When adding a dissector to a dissector table with a given key, only add
it for Decode As if the dissector table supports it.
For non-FT_STRING dissector tables, always check for multiple entries
for the same protocol with different dissectors, and report an error if
we found them.
This means there's no need for the creator of a dissector table to
specify whether duplicates of that sort should be allowed - we always do
the check when registering something for "Decode As" (in a non-FT_STRING
dissector table), and just don't bother registering anything for "Decode
As" if the dissector table doesn't support "Decode As", so there's no
check done for those dissector tables.
Change-Id: I4a1fdea3bddc2af27a65cfbca23edc99b26c0eed
Reviewed-on: https://code.wireshark.org/review/17402
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
If an ASN.1 dissector is calling register_dissector for itself in its proto_register_xxx
function and then calling find_dissector for itself in its proto_reg_handoff_xxx
function then just create a static handle for that dissector and use the return
value of register_dissector, so the find isn't necessary.
Change-Id: I911bdadc2fb4259601c141b955e741a2369cc447
Reviewed-on: https://code.wireshark.org/review/16233
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Also some other tricks to remove unnecessary tvb_get_string_enc calls.
Change-Id: I2f40d9175b6c0bb0b1364b4089bfaa287edf0914
Reviewed-on: https://code.wireshark.org/review/16158
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Add a reference count to stat_tap_table_ui to prevent bad deallocations.
Bug: 12437
Change-Id: Ib9b1f929d08a574c306dc755ec416ab94a3fd6d3
Reviewed-on: https://code.wireshark.org/review/15920
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This will make it easier to determine protocol dependencies.
Some LLC OUI dissector tables didn't have an associated protocol, so they were left without one (-1 used)
Change-Id: I6339f16476510ef3f393d6fb5d8946419bfb4b7d
Reviewed-on: https://code.wireshark.org/review/14446
Reviewed-by: Michael Mann <mmann78@netscape.net>
That removes most of the uses of the frame number field in the
frame_data structure.
Change-Id: Ie22e4533e87f8360d7c0a61ca6ffb796cc233f22
Reviewed-on: https://code.wireshark.org/review/13509
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add #defines for all the value types and use them.
Make the preference static, as it's not used outside this module.
Change-Id: Ibd04274b4160d18a55b10f47ce866ac97a76309e
Reviewed-on: https://code.wireshark.org/review/12987
Reviewed-by: Guy Harris <guy@alum.mit.edu>
A "new" statistics tap UI is a statistics tap UI where the statistics
are maintained as tables and common code handles the tables; what
matters is the tables, not that it's "new".
Change-Id: I7a0e63cfac98c24cd5e7dce973b9a0cc5b6a03ba
Reviewed-on: https://code.wireshark.org/review/12897
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change-Id: Id218dec9e5a721d6c63fd34962ffe50b6ab8dd56
Reviewed-on: https://code.wireshark.org/review/11946
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Reviewed-by: Diederik de Groot <dkgroot@talon.nl>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The target here is the Decode As dialog where protocols have multiple registrations into a dissector table and that shows up as multiple entries in the Decode As dialog list with the same name so users are unsure which "dissector" they are choosing.
The "default" behavior (done in this commit) is to not allow duplicates for a dissector table, whether its part of Decode As or not. It's just ENFORCED for Decode As.
Bug: 3949
Change-Id: Ibe14fa61aaeca0881f9cc39b78799e314b5e8127
Reviewed-on: https://code.wireshark.org/review/11405
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: I0aedefbb77899ebceac7fb08249faf47964d785b
Reviewed-on: https://code.wireshark.org/review/10163
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add REGISTER_STAT_GROUP_TELEPHONY_ANSI as well, and use it to add
recently updated stats.
Make sure we properly escape our path separators.
Change-Id: I979d5c29a82acddec1a9bcae7e3cb9c5ea3f9d33
Reviewed-on: https://code.wireshark.org/review/9564
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
General approach:
1. Split allocation (e.g. g_hash_table_new) from deallocation
(g_hash_table_destroy) into functions named "init" and "cleanup".
2. Remove guards that test whether the hash tables are set as
init is always called before cleanup.
3. Remove setting hash tables to NULL after destruction.
4. Copy register_init_routine function call and change init to cleanup.
5. Add cleanup function that calls reassembly_table_destroy if there
is a reassembly_table_init function.
Some templates were modified as follows:
- snmp: split renew into init+cleanup, but keep renew for the uat_new
callback.
- ldap,ros: Rename init to cleanup as there was no initialization.
- camel: remove init function from header, make it static. Remove debug
print.
- tcap: remove unused ssn_range assignment.
Files in epan/ were regenerated using cmake && make asn1
Change-Id: Idac16ebf0ec304e0c8becaab5d32904e56eb69b9
Reviewed-on: https://code.wireshark.org/review/9136
Reviewed-by: Michael Mann <mmann78@netscape.net>
A few sample tap/dissectors (ANSI/A, ANSI MAP) are also included to test the API. The "GUI output" is a bit raw and could use some "prettying up", but all the basic hooks are there.
Telephony "stat grouping" needs to be better alphabetized to properly populate menu (on GTK, probably Qt)
Change-Id: I98514171f69c4ab3a304dccb26c71d629703c9ab
Reviewed-on: https://code.wireshark.org/review/9110
Reviewed-by: Michael Mann <mmann78@netscape.net>
This mostly involved adding expert info capabilities to many of the dissectors so that they could correctly flag error conditions.
Only remaining proto_tree_add_text calls are in H248.cnf, which has a convoluted way of using hf_ data to make its tree.
Change-Id: I6412150c2ec1977d7fa38f3f0ed416680bdfb141
Reviewed-on: https://code.wireshark.org/review/3500
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: Ib3a1ddc4342a7a8648d6ed8bfcb35aa229c56a27
Reviewed-on: https://code.wireshark.org/review/2445
Reviewed-by: Michael Mann <mmann78@netscape.net>
John Thacker