It only registers one file type/subtype, so rename it to
wtap_register_file_type_subtype().
That will also force plugins to be recompiled; that will produce compile
errors for some plugins that didn't change to match the new contents of
the file_type_subtype_info structure.
Also check to make sure that the registered file type/subtype supports
at least one type of block; a file type/subtype that doesn't return
*any* blocks and doesn't permit *any* block types to be written is not
very useful. That should also catch most if not all other plugins that
didn't change to match the new contents of the file_type_subtype_info
structure.
Don't make errors registering a file type/subtype fatal; just complain,
don't register the bogus file type/subtype, and drive on.
Instead of a "supports name resolution" Boolean and bitflags for types of
comments supported, provide a list of block types that the file
type/subtype supports, with each block type having a list of options
supported. Indicate whether "supported" means "one instance" or
"multiple instances".
"Supports" doesn't just mean "can be written", it also means "could be
read".
Rename WTAP_BLOCK_IF_DESCRIPTION to WTAP_BLOCK_IF_ID_AND_INFO, to
indicate that it provides, in addition to information about the
interface, an ID (implicitly, in pcapng files, by its ordinal number)
that is associated with every packet in the file. Emphasize that in
comments - just because your capture file format can list the interfaces
on which a capture was done, that doesn't mean it supports this; it
doesn't do so if the file doesn't indicate, for every packet, on which
of those interfaces it was captured (I'm looking at *you*, Microsoft
Network Monitor...).
Use APIs to query that information to do what the "does this file
type/subtype support name resolution information", "does this file
type/subtype support all of these comment types", and "does this file
type/subtype support - and require - interface IDs" APIs did.
Provide backwards compatibility for Lua.
This allows us to eliminate the WTAP_FILE_TYPE_SUBTYPE_ values for IBM's
iptrace; do so.
Provide a wiretap routine to get an array of all savable file
type/subtypes, sorted with pcap and pcapng at the top, followed by the
other types, sorted either by the name or the description.
Use that routine to list options for the -F flag for various commands
Rename wtap_get_savable_file_types_subtypes() to
wtap_get_savable_file_types_subtypes_for_file(), to indicate that it
provides an array of all file type/subtypes in which a given file can be
saved. Have it sort all types, other than the default type/subtype and,
if there is one, the "other" type (both of which are put at the top), by
the name or the description.
Don't allow wtap_register_file_type_subtypes() to override any existing
registrations; have them always register a new type. In that routine,
if there are any emply slots in the table, due to an entry being
unregistered, use it rather than allocating a new slot.
Don't allow unregistration of built-in types.
Rename the "dump open table" to the "file type/subtype table", as it has
entries for all types/subtypes, even if we can't write them.
Initialize that table in a routine that pre-allocates the GArray before
filling it with built-in types/subtypes, so it doesn't keep getting
reallocated.
Get rid of wtap_num_file_types_subtypes - it's just a copy of the size
of the GArray.
Don't have wtap_file_type_subtype_description() crash if handed an
file type/subtype that isn't a valid array index - just return NULL, as
we do with wtap_file_type_subtype_name().
In wtap_name_to_file_type_subtype(), don't use WTAP_FILE_TYPE_SUBTYPE_
names for the backwards-compatibility names - map those names to the
current names, and then look them up. This reduces the number of
uses of hardwired WTAP_FILE_TYPE_SUBTYPE_ values.
Clean up the type of wtap_module_count - it has no need to be a gulong.
Have built-in wiretap file handlers register names to be used for their
file type/subtypes, rather than building the table in init.lua.
Add a new Lua C function get_wtap_filetypes() to construct the
wtap_filetypes table, based on the registered names, and use it in
init.lua.
Add a #define WSLUA_INTERNAL_FUNCTION to register functions intended
only for internal use in init.lua, so they can be made available from
Lua without being documented.
Get rid of WTAP_NUM_FILE_TYPES_SUBTYPES - most code has no need to use
it, as it can just request arrays of types, and the space of
type/subtype codes can be sparse due to registration in any case, so
code has to be careful using it.
wtap_get_num_file_types_subtypes() is no longer used, so remove it. It
returns the number of elements in the file type/subtype array, which is
not necessarily the name of known file type/subtypes, as there may have
been some deregistered types, and those types do *not* get removed from
the array, they just get cleared so that they're available for future
allocation (we don't want the indices of any registered types to changes
if another type is deregistered, as those indicates are the type/subtype
values, so we can't shrink the array).
Clean up white space and remove some comments that shouldn't have been
added.
Remove most of the built-in file types from the table in
wiretap/file_access.c and, instead, have the file types register
themselves, using wtap_register_file_type_subtypes().
This reduces the source code changes needed to add a new file type from
three (add the handler, add the file type to the table in file_access.c,
add a #define for the file type in wiretap/wtap.h) to one (add the
handler). (It also requires adding the handler's source file to
wiretap/CMakeLists.txt, but that's required in both cases.)
A few remain because the WTAP_FILE_TYPE_SUBTYPE_ #define is used
elsewhere; that needs to be fixed.
Fix the wiretap/CMakefile.txt file to scan k12text.l, as that now
contains a registration routine. In the process, avoid scanning files
that don't implement a file type and won't ever have a registration
routine.
Add a Lua routine to fetch the total number of file types; we use that
in some code to construct the wtap_filetypes table, which we need to do
in order to continue to have all the values that used to come from the
WTAP_FILE_TYPE_SUBTYPE_ types.
While we're at it, add modelines to a file that lacked them.
When writing a capture as a commview file the header written is two
bytes longer than the specification. Even though we count 24, we
actually write 26. This makes the commview file corrupt, as is apparent
when reading such file, eg., after using Save As... with this format.
Replace writing 2 bytes for the last two fields in the header by 1 byte
each, as per the header specification.
Change-Id: I9436f7837b2e3617a389619884bf93ad146e95f3
Reviewed-on: https://code.wireshark.org/review/34450
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Fall back on the Wayback Machine for some links.
Change-Id: I6a44a2caaeb4fa521c2f08196e7c36069e3bb842
Reviewed-on: https://code.wireshark.org/review/34103
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change all wireshark.org URLs to use https.
Fix some broken links while we're at it.
Change-Id: I161bf8eeca43b8027605acea666032da86f5ea1c
Reviewed-on: https://code.wireshark.org/review/34089
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That makes it - and the routines that implement it - work more like the
seek-read routine.
Change-Id: I0cace2d0e4c9ebfc21ac98fd1af1ec70f60a240d
Reviewed-on: https://code.wireshark.org/review/32727
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
It loads, but displays nothing (either in Safari 12, or a presumably
recent Chrome, on my Mac).
Change-Id: I4a5530007ddf3c14a5fd349998318d5868da5d5c
Reviewed-on: https://code.wireshark.org/review/30588
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Separate the stuff that any record could have from the stuff that only
particular record types have; put the latter into a union, and put all
that into a wtap_rec structure.
Add some record-type checks as necessary.
Change-Id: Id6b3486858f826fce4b096c59231f463e44bfaa2
Reviewed-on: https://code.wireshark.org/review/25696
Reviewed-by: Guy Harris <guy@alum.mit.edu>
The first is deprecated, as per https://spdx.org/licenses/.
Change-Id: I8e21e1d32d09b8b94b93a2dc9fbdde5ffeba6bed
Reviewed-on: https://code.wireshark.org/review/25661
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Use WTAP_MAX_PACKET_SIZE_STANDARD, set to 256KB, for everything except
for D-Bus captures. Use WTAP_MAX_PACKET_SIZE_DBUS, set to 128MB, for
them, because that's the largest possible D-Bus message size. See
https://bugs.freedesktop.org/show_bug.cgi?id=100220
for an example of the problems caused by limiting the snapshot length to
256KB for D-Bus.
Have a snapshot length of 0 in a capture_file structure mean "there is
no snapshot length for the file"; we don't need the has_snap field in
that case, a value of 0 mean "no, we don't have a snapshot length".
In dumpcap, start out with a pipe buffer size of 2KB, and grow it as
necessary. When checking for a too-big packet from a pipe, check
against the appropriate maximum - 128MB for DLT_DBUS, 256KB for
everything else.
Change-Id: Ib2ce7a0cf37b971fbc0318024fd011e18add8b20
Reviewed-on: https://code.wireshark.org/review/21952
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
And some comments in the case where we're converting the result of
time() - if your machine's idea of time predates January 1, 1970,
00:00:00 UTC, it'll crash on Windows, but that's not a case where a
*file* can cause the problem due either to a bad file time stamp or bad
time stamps in the file.
Change-Id: I837a438e4b875dd8c4f3ec2137df7a16ee4e9498
Reviewed-on: https://code.wireshark.org/review/18369
Reviewed-by: Guy Harris <guy@alum.mit.edu>
These file formats have 16-bit packet lengths, so, even with some extra
metadata added, the packet data length will never be bigger than
WTAP_MAX_PACKET_SIZE. (No, we won't ever reduce WTAP_MAX_PACKET_SIZE.)
Change-Id: I9e1b1d90971f91cc6e5d66d0aa93841445b2bc22
Reviewed-on: https://code.wireshark.org/review/15186
Reviewed-by: Guy Harris <guy@alum.mit.edu>
The use of a flag field here is aesthetically unpleasing when the flags
are referred to frequently. Convert these into bitfield entries.
Change-Id: I6f47e31558439dfd343ec7f856d04480366a1237
Reviewed-on: https://code.wireshark.org/review/12511
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
It doesn't actually *close* any handle, so it's best called a "finish"
routine rather than a "close" routine.
In libwiretap modules, don't bother setting the finish routine pointer
to null - it's already initialized to null (it's probably best not to
require modules to set it).
Change-Id: I19554f3fb826db495f17b36600ae36222cbc21b0
Reviewed-on: https://code.wireshark.org/review/11659
Reviewed-by: Guy Harris <guy@alum.mit.edu>
There were some cases where it wasn't getting initialized when we set
the PHY to 11b, in addition to the one Pascal found.
Change-Id: I127737cd29dc53c96342364de5cb722b135f23f3
Reviewed-on: https://code.wireshark.org/review/9540
Reviewed-by: Guy Harris <guy@alum.mit.edu>
OK, anybody know how to convert a frequency between 4.9 GHz and 5.0 GHz
into a channel number, in a fashion that handles what's actually used in
both the US and Japan?
Change-Id: I95f4f9649e379b3d6651aadf8f62d8406b81b3b3
Reviewed-on: https://code.wireshark.org/review/9511
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Have a field that holds the PHY type but nothing else. Have
a union with structures holding PHY-type-specific information, as a
bunch of attributes are PHY-specific.
If we have a channel and band, but don't have the frequency, attempt to
calculate the frequency, and add that to the radio information if we
succeed. If we have the frequency, but don't have the channel, attempt
to calculate the channel, and add that to the radio information if we
succeed.
Handle FHSS information, 11a "half/quarter-clocked" and turbo
information, 11g normal vs. Super G, additional 11n and 11ac
information, and the "short preamble" flag for 11b and 11g.
Add a PHY type for 11 legacy DSSS and detect it if possible.
Clean up the AVS dissector - make all fields wlancap. fields (if you
want generic fields, use the wlan_radio. fields).
Set more fields when writing out Commview Wi-Fi files.
Change-Id: I691ac59f5e9e1a23779b56a65124049914b72e69
Reviewed-on: https://code.wireshark.org/review/9146
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Provide that information so that the "802.11 radio information" protocol
can indicate whether a packet was 802.11 legacy/11b/11a/11g/11n/11ac,
and possibly whether it's 2.4 GHz or 5 GHz 11n. (Sometimes the center
frequency might not be supplied, so the band information can be useful.)
Also, provide some 11ac information, now that we can distinguish between
11n and 11ac. Don't calculate the data rate from the MCS index unless
it's 11n; we don't yet have code to calculate it for 11ac.
For radiotap, only provide guard interval information for 11n and 11ac,
not for earlier standards.
Handle the 11ac flag in the Peek remote protocol.
For Peek tagged files, the "extension flags" are 11n/11ac flags, so we
don't have to check for the "MCS used" bit in order to decide that the
packet is 11n or 11ac or to decide whether to provide the "bandwidth" or
"short GI" information.
Change-Id: Ia8a1a9b11a35243ed84eb4e72c384cc77512b098
Reviewed-on: https://code.wireshark.org/review/9032
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Have dissectors of various forms of radio information headers in the
packets fill in a struct ieee_802_11_phdr with radio information as
appropriate, and call the "802.11 radio information" dissector rather
than the raw 802.11 dissector.
This means that the radio information can be found in a
protocol-independent and encapsulation-independent form when you're
looking at the packet; that information can be presented in a form
somewhat easier to read than the raw metadata header format.
It also enables having a single "radio information" tap that allows
statistics to handle all different sorts of radio information
encapsulation.
In addition, it lets us clean up some of the arguments passed to the
common 802.11 dissector routine, by having it pull that information from
the struct ieee_802_11_phdr.
Ensure that the right structure gets passed to that routine, and that
all the appropriate parts of that structure are filled in.
Rename the 802.11 radio protocol to "wlan_radio", rather than just
"radio", as it's 802.11-specific. Give all its fields "wlan_radio."
names rather than "wlan." names.
Change-Id: I78d79afece0ce0cf5fc17293c1e29596413b31c8
Reviewed-on: https://code.wireshark.org/review/8992
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That indicates that it's a problem specific to *writing* capture files;
we've already converted some errors to that style, and added a new one
in that style.
Change-Id: I8268316fd8b1a9e301bf09ae970b4b1fbcb35c9d
Reviewed-on: https://code.wireshark.org/review/5826
Reviewed-by: Guy Harris <guy@alum.mit.edu>
For cases where record (meta)data is something that can't be written out
in a particular file format, return WTAP_ERR_UNWRITABLE_REC_DATA along
with an err_info string.
Report (and free) that err_info string in cases where
WTAP_ERR_UNWRITABLE_REC_DATA is returned.
Clean up some other error reporting cases, and flag with an XXX some
cases where we aren't reporting errors at all, while we're at it.
Change-Id: I91d02093af0d42c24ec4634c2c773b30f3d39ab3
Reviewed-on: https://code.wireshark.org/review/5823
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That makes it clearer what the problem is, and that it should only be
returned by the dump code path, not by the read code path.
Change-Id: Icc5c9cff43be6c073f0467607555fa7138c5d074
Reviewed-on: https://code.wireshark.org/review/5797
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add a set of presence bits, so we can indicate which bits of radio
metadata we do and don't have.
Fill in more radio metadata from capture files, and display it.
(More to come.)
Change-Id: Idea2c05442c74af17c14c4d5a8d8025ab27fbd15
Reviewed-on: https://code.wireshark.org/review/4987
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Clean up some things we ran across while making those changes.
Change-Id: Ic0d8943d36e6e120d7af0a6148fad98015d1e83e
Reviewed-on: https://code.wireshark.org/review/4581
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add wtap_read_bytes(), which takes a FILE_T, a pointer, a byte count, an
error number pointer, and an error string pointer as arguments, and that
treats a short read of any sort, including a read that returns 0 bytes,
as a WTAP_ERR_SHORT_READ error, and that returns the error number and
string through its last two arguments.
Add wtap_read_bytes_or_eof(), which is similar, but that treats a read
that returns 0 bytes as an EOF, supplying an error number of 0 as an EOF
indication.
Use those in file readers; that simplifies the code and makes it less
likely that somebody will fail to supply the error number and error
string on a file read error.
Change-Id: Ia5dba2a6f81151e87b614461349d611cffc16210
Reviewed-on: https://code.wireshark.org/review/4512
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Pcap-ng files don't have a per-file time stamp resolution, they have a
per-interface time stamp resolution. Add new time stamp resolution
types of "unknown" and "per-packet", add the time stamp resolution to
struct wtap_pkthdr, have the libwiretap core initialize it to the
per-file time stamp resolution, and have pcap-ng do the same thing with
the resolution that it does with the packet encapsulation.
Get rid of the TS_PREC_AUTO_XXX values; just have TS_PREC_AUTO, which
means "use the packet's resolution to determine how many significant
digits to display". Rename all the WTAP_FILE_TSPREC_XXX values to
WTAP_TSPREC_XXX, as they're also used for per-packet values.
Change-Id: If9fd8f799b19836a5104aaa0870a951498886c69
Reviewed-on: https://code.wireshark.org/review/4349
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Otherwise, if you link with both libwiretap and libfiletap, it's
anybody's guess which one you get. That means you're wasting memory
with two copies of its routines if they're identical, and means
surprising behavior if they're not (which showed up when I was debugging
a double-free crash - fixing libwiretap's buffer_free() didn't fix the
problem, because Wireshark happened to be calling libfiletap' unfixed
buffer_free()).
There's nothing *tap-specific about Buffers, anyway, so it really
belongs in wsutil.
Change-Id: I91537e46917e91277981f8f3365a2c0873152870
Reviewed-on: https://code.wireshark.org/review/3066
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add a "record type" field to "struct wtap_pkthdr"; currently, it can be
REC_TYPE_PACKET, for a record containing a packet, or
REC_TYPE_FILE_TYPE_SPECIFIC, for records containing file-type-specific
data.
Modify code that reads packets to be able to handle non-packet records,
even if that just means ignoring them.
Rename some routines to indicate that they handle more than just
packets.
We don't yet have any libwiretap code that supplies records other than
REC_TYPE_PACKET or that supporting writing records other than
REC_TYPE_PACKET, or any code to support plugins for handling
REC_TYPE_FILE_TYPE_SPECIFIC records; this is just the first step for bug
8590.
Change-Id: Idb40b78f17c2c3aea72031bcd252abf9bc11c813
Reviewed-on: https://code.wireshark.org/review/1773
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This reverts commit c0c480d08c.
A better way to do this is to have the record type be part of struct wtap_pkthdr; that keeps the metadata for the record together and requires fewer API changes. That is in-progress.
Change-Id: Ic558f163a48e2c6d0df7f55e81a35a5e24b53bc6
Reviewed-on: https://code.wireshark.org/review/1741
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This is the first step towards implementing the mechanisms requestd in
bug 8590; currently, we don't return any records other than packet
records from libwiretap, and just ignore non-packet records in the rest
of Wireshark, but this at least gets the ball rolling.
Change-Id: I34a45b54dd361f69fdad1a758d8ca4f42d67d574
Reviewed-on: https://code.wireshark.org/review/1736
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This reverts commit 1abeb277f5.
This isn't building, and looks as if it requires significant work to fix.
Change-Id: I622b1bb243e353e874883a302ab419532b7601f2
Reviewed-on: https://code.wireshark.org/review/1568
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Start of refactoring Wiretap and breaking structures down into "generally useful fields for dissection" and "capture specific". Since this in intended as a "base" for Wiretap and Filetap, the "wft" prefix is used for "common" functionality.
The "architectural" changes can be found in cfile.h, wtap.h, wtap-int.h and (new file) wftap-int.h. Most of the other (painstaking) changes were really just the result of compiling those new architecture changes.
bug:9607
Change-Id: Ife858a61760d7a8a03be073546c0e7e582cab2ae
Reviewed-on: https://code.wireshark.org/review/1485
Reviewed-by: Michael Mann <mmann78@netscape.net>
(Using sed : sed -i '/^ \* \$Id\$/,+1 d')
Fix manually some typo (in export_object_dicom.c and crc16-plain.c)
Change-Id: I4c1ae68d1c4afeace8cb195b53c715cf9e1227a8
Reviewed-on: https://code.wireshark.org/review/497
Reviewed-by: Anders Broman <a.broman58@gmail.com>
willing to read or that's bigger than will fit in the file format;
instead, report an error.
For the "I can't write a packet of that type in that file type" error,
report the file type in question.
svn path=/trunk/; revision=54882
subtypes, e.g. Network Monitor version 1 and Network Monitor version 2
are separate "file types", even though they both come from Network
Monitor.
Rename various functions, #defines, and variables appropriately.
svn path=/trunk/; revision=53166
Guy Harris