This is set before calling dissect_packet() to let the proto_tree routines
whether or not it needs to go through the trouble of formatting strings.
The use of this dramatically decreases the number of calls to vsnprintf.
svn path=/trunk/; revision=583
necessary nor sufficient if you're using "struct tm" (on many, perhaps
most, perhaps even all modern UNIXes, <sys/time.h> includes <time.h>,
which declares "struct tm", but that's not necessarily the case on
non-UNIX systems).
Include <time.h> in "file.c", to declare "struct tm".
Don't use PCAP_ERRBUF_SIZE to declare a message string buffer - that
won't work if you don't have "libpcap".
svn path=/trunk/; revision=549
code supplied by a Wiretap routine (whether a positive UNIX "errno" code
or a negative Wiretap error code), and returns an error message
corresponding to it.
Use that to construct the message Ethereal put up in a message box for
those errors for which we don't have Ethereal put up a message of its
choice.
svn path=/trunk/; revision=545
and in different capture files; throw in some heuristics to try to
figure out whether the 4-byte header is:
1) PPP-over-HDLC (some version of ISDN4BSD?);
2) big-endian AF_ value (BSD on big-endian platforms);
3) little-endian AF_ value (BSD on little-endian platforms);
4) two octets of 0 followed by an Ethernet type (Linux, at least
on little-endian platforms, as mutated by "libpcap").
Make a separate Wiretap encapsulation type, WTAP_ENCAP_NULL,
corresponding to DLT_NULL.
Have the PPP code dissect the frame if it's PPP-over-HDLC, and have
"ethertype()" dissect the Ethernet type and the rest of the packet if
it's a Linux-style header; dissect it ourselves only if it's an AF_
value.
Have Wiretap impose a maximum packet size of 65535 bytes, so that it
fails more gracefully when handed a corrupt "libpcap" capture file
(other capture file formats with more than a 16-bit capture length
field, if any, will have that check added later), and put that size in
"wtap.h" and have Ethereal use it as its notion of a maximum packet
size.
Have Ethereal put up a "this file appears to be damaged or corrupt"
message box if Wiretap returns a WTAP_ERR_BAD_RECORD error when opening
or reading a capture file.
Include loopback interfaces in the list of interfaces offered by the
"Capture" dialog box, but put them at the end of the list so that it
doesn't default to a loopback interface unless there are no other
interfaces. Also, don't require that an interface in the list have an
IP address associated with it, and only put one entry in the list for a
given interface (SIOCGIFCONF returns one entry per interface *address*,
not per *interface* - and even if you were to use only IP addresses, an
interface could conceivably have more than one IP address).
Exclusively use Wiretap encapsulation types internally, even when
capturing; don't use DLT_ types.
svn path=/trunk/; revision=540
global variable, dfilter_error_msg is now available, being NULL when there
was no error, or pointing to a string when an error occurred. The three
places that dfilter_compile() is called now use this global variable to
report the error message to the user. A default error message is put
in that string if no context-specific error message is available (since
I only have one context-specifici error message, namely, ETHER values,
that will be most of the time).
svn path=/trunk/; revision=530
file, instead of throwing out all but LANE or RFC 1483 data frames and
pretending that the former are just Ethernet or Token-Ring frames.
Add some level of decoding for ATM LANE, but not all of it; the rest,
including decoding non-LANE frames, is left as an exercise for somebody
who has captures they want to decode, an interest in decoding them, ATM
expertise, and time....
svn path=/trunk/; revision=523
return 1 on success, -1 if they got an error, and 0 if the file isn't of
the type that file is checking for, and supply an error code if they
return -1; have "wtap_open_offline()" use that error code. Also, have
the per-capture-file-type open routines treat errors accessing the file
as errors, and return -1, rather than just returning 0 so that we try
another file type.
Have the per-capture-file-type read routines "wtap_loop()" calls return
-1 and supply an error code on error (and not, as they did in some
cases, call "g_error()" and abort), and have "wtap_loop()", if the read
routine returned an error, return FALSE (and pass an error-code-pointer
argument onto the read routines, so they fill it in), and return TRUE on
success.
Add some new error codes for them to return.
Now that "wtap_loop()" can return a success/failure indication and an
error code, in "read_cap_file()" put up a message box if we get an error
reading the file, and return the error code.
Handle the additional errors we can get when opening a capture file.
If the attempt to open a capture file succeeds, but the attempt to read
it fails, don't treat that as a complete failure - we may have managed
to read some of the capture file, and we should display what we managed
to read.
svn path=/trunk/; revision=516
want to read the next file with the same filter that you used on the
last file.
In the "File/Open" dialog box, parse the read filter before trying to
open the file, and if the parse fails, leave the dialog box up so the
user still has the filter and file name around and can try to fix the
problem.
Keep the compiled read filter attached to the "capture_file" structure,
so you don't have to reparse it on a "File/Reload".
svn path=/trunk/; revision=497
selecting a field from more than one protocol tree. It turns out that
gtktree.c doesn't clear the tree-item selection list when you use
gtk_tree_clear_items() (which calls gtk_tree_remove_items() ). So the next
time a tree item is selected in a new protocol tree (which is our old
protocol tree, with everything removed, and new things added), gtk_tree
tries to _deselect_ our old selection. But that tree-item which is trying
to be deselected is long gone, resulting in the assert because widget == NULL.
A function needs to be added to gtk_tree to deselect the tree-item selection
for us. (or we need to go through the hassle of creating a new gtk_tree
instead of recycling tree_view over and over).
I stole some code from another section of gtktree.c which lets us clear
the selection in clear_tree_and_hex_views().
Also, I modified the argument to gtk_tree_set_view_mode. We were using
"TRUE", when really we should have used a member of the GtkTreeViewMode
enumeration, namely GTK_TREE_VIEW_ITEM ( which is 1, which is TRUE :-)
svn path=/trunk/; revision=496
reason for the failure, and have it do the checks to make sure the file
being opened is a plain file or a pipe.
Have "open_cap_file()" make use of that.
Don't automatically set "last_open_dir" if a "-r" flag was specified on
the command line - do so only if the file in question could actually be
opened.
svn path=/trunk/; revision=495
it's called after "open_cap_file()" has been called, and is always
passed the file name passed to "open_cap_file()", and that file name is
stored as "cf->filename", so "read_cap_file()" can just use
"cf->filename" as the pathname of the file.
svn path=/trunk/; revision=494
The former, which used to be called by "load_cap_file()", now just opens
the file and, if the open succeeds, closes any capture file we
previously had open, reinitializes any protocols that need
reinitialization, and saves information about the new capture file in
the "capture_file" structure to which it was passed a pointer. The
latter reads the file already opened by "read_cap_file()".
For "File/Open", call "open_cap_file()" before dismissing the file
selection box; if it fails, "open_cap_file()" will have popped up a
message box complaining about it - just return, leaving the file
selection box open so the user can, after dismissing the message box,
either try again with a different file name, or dismiss the file
selection box. (Other file selection boxes should be made to work the
same way.) If "open_cap_file()" succeeds, dismiss the file selection
box, and read the capture file in.
svn path=/trunk/; revision=492
handle a display with a display filter.
(Also, don't have it recompute the time stamps - they were computed when
the packet was added to the packet list in the first place.)
svn path=/trunk/; revision=485
use "check_col()", otherwise "check_col()" always fails, and the time
column never gets changed. (How did I manage to break that?)
svn path=/trunk/; revision=483
in dfilter-grammar.y) to a new struct dfilter. Display filters now have
their own struct, rather than simply being GNode's. This allows multiple
display filters to exist at once, aiding John McDermott in his
work on colorization.
svn path=/trunk/; revision=480
the "Open File" dialog box (the "Open File" dialog box equivalent of the
"-R" flag). Have "load_cap_file()" take the filter expression as an
argument, and make the global "rfilter" into a member of a
"capture_file" structure.
When reading a temporary capture file after a live capture, don't apply
any filter.
Move the code that pops up error boxes on file opens when reading a
capture file back to "load_cap_file()"; it also pops up error boxes if
the filter expression can't be parsed.
Don't enable "File/Save" or "File/Save As..." if an attempt to read a
capture file fails - if there was already an open capture file, it was
closed by "load_cap_file()", so we no longer have an open file to save.
svn path=/trunk/; revision=460
N^2 in the ultimate size of the list (as "g_list_append()" is linear in
the size of the list, at least when used in the way the GLib
documentation says to use it); instead, maintain our own linked list of
"frame_data" structures for all packets read, including a pointer to the
last element.
"gtk_clist_set_row_data()" is linear in the row number, so if it's used
to attach a pointer to the "frame_data" structure for a packet to the
packet list GtkClist row for each packet, that's also N^2 in the number
of packets in that packet list; instead, store the row number in the
"frame_data" structure, and find the packet for a given row by scanning
the list for it (we were already scanning the list linearly to find that
packet's index in the list of all packets; that's only done when a
packet's selected, so it's not *too* bad, but it might be nice to avoid
having to do that scan).
svn path=/trunk/; revision=457
display-filter syntax expression as an argument, and causes that filter
to be applied to all packets when a capture file is read in; packets
that don't match the filter are discarded.
svn path=/trunk/; revision=454
try as I might, I couldn't get gtk_timeout_add to work. I read all the docs,
but no luck. So for now I call dfilter_progress_cb for every 20 packets
that are filtered. I'd rather have *something* for the next Ethereal
release than nothing.
I also modified file_progress_cb to use it's local copy of cf rather
than the global copy.
svn path=/trunk/; revision=447
double-click on a packet, it'll select that packet without necessarily
first un-selecting it (this may be a GTK+ 1.0[.x] vs. GTK+ 1.2[.x]
difference; Jeff Jahr said he first saw it when going from Ethereal
0.6.3 to 0.7.0 and going from GTK+ 1.0[.x] to GTK+ 1.2.3, but I saw it
on 0.6.3 with GTK+ 1.2.3 as well).
svn path=/trunk/; revision=441
wiretap support for RADCOM Ltd.'s WAN/LAN analyzers (see
http://www.radcom-inc.com/
). Note: as I remember, IEEE 802.2/ISO 8022 LLC has somewhat of an SDLC
flavor to it, just as I think LAP, LAPB, LAPD, and so on do, so we may
be able to combine some of the LLC dissection and the LAPB dissection
into common code that could, conceivably be used for other SDLC-flavored
protocols.
Make "S" a mnemonic for "Summary" in the "Tools" menu.
Move the routine, used for the "Tools/Summary" display, that turns a
wiretap file type into a descriptive string for it into the wiretap
library itself, expand on some of its descriptions, and add an entry for
files from a RADCOM analyzer.
Have "Tools/Summary" display the snapshot length for the capture.
svn path=/trunk/; revision=416
- read only the real number of packets that have been written
by the child process. That's avoid incomplete packet read.
- special timeout handling no more necessary and the whole
real time capture and display behavior is much more
satisfying with this patch.
- wiretap modified to allow the reading of 'count' packets
with wtap_loop.
svn path=/trunk/; revision=398
COL_INFO columns resize automatically even during a live
capture;
columns showing network addresses never resize automatically;
other columns resize only when a capture is done;
and make all columns resizeable by hand (once they've resized, for
auto-resizeable columns).
svn path=/trunk/; revision=394
"capture_file" structure, make a "select_packet()" routine to parallel
"unselect_packet()", and have "unselect_packet()" free the protocol tree
that the "protocol_tree" member of the "capture_file" passed to it
points to.
It should now be impossible to do a "Print Packet" operation if no
packet has been selected, so remove the check for that (we'll probably
just blow up if it happens; if it does, that means we probably forgot to
gray out "/File/Print Packet" somewhere, so we should fix that).
svn path=/trunk/; revision=385
you have a capture.
Leave the job of enabling and disabling menu items that make sense only
if you have a capture (except for "File/Save" and "File/Save As...", for
now) up to "load_cap_file()", "close_cap_file()", and the like - don't
scatter that stuff throughout the code.
Disable "File/Print Packet" if no packet is selected; enable it only if
a packet is selected.
If there's a selected packet, and a display filter is run:
if the selected packet passed the filter, re-select it;
if the selected packet didn't pass the filter, un-select it.
If we've opened a live "pcap" capture, but can't do the capture because
we can't get the netmask info, or can't parse the capture filter string,
or can't install the filter, close the live capture and the dump and
delete the dump file.
If we failed to open a live "pcap" capture, don't try to read the
capture file - it doesn't exist.
svn path=/trunk/; revision=384
think I may have to worry about page boundaries and the like - so, for
now, we make the "File/Print..." stuff print only as text. ("Print
Packet" can still print PostScript, as always.)
We clean up a few text vs. PostScript things for printing multiple
frames, but it's still not ready for prime time.
svn path=/trunk/; revision=383
capture to a file or printer. This should eventually get the ability to
print either all the packets or only the packets selected by the display
filter, and possibly also the ability to print only packets M through N.
Get rid of "cur" member of "capture_file" structure; nobody used it.
There's no need to pass a pointer to a "dialog_button" variable to
"simple_dialog()" for the error boxes displayed if a file copy or move
fails; that dialog box is just a message box and has only an "OK"
button.
Put the declaration of "prefs" into "prefs.h".
svn path=/trunk/; revision=378
that's set whenever we encounter an EOF; if that flag is set, all
subsequent reads return an EOF indication. I.e., end-of-file is sticky.
This means that the stuff to continue reading a capture file, if we're
updating the display as the capture progresses, doesn't work - it gets
stuck at the point where the first read finished.
To clear that flag, we must do an "fseek()"; we do one that doesn't move
the seek pointer.
When updating the display as a capture progresses, do
"init_col_widths()" only when we first open the capture file; there's no
need to do it every time we read from the file - the column widths never
get smaller, they can only get bigger or stay the same.
svn path=/trunk/; revision=370
display filter code, which uses features in GLIB-1.2.x), I removed
the vestigial code supporting old 1.0.x and 1.1.x GTK+ versions.
svn path=/trunk/; revision=360
but does not link. Perhaps someone who understands the MS tools can help
out. I made it link a few months ago, but with different version of glib/gtk+.
I can't remember how I made it link.
Most of the compatibility issues were resolved with adding
#ifdef HAVE_UNISTD_H the the source code. Please be sure to add this to all
future code.
svn path=/trunk/; revision=359
apply the filter (if it isn't invalid).
Apply the filter by clearing the Clist that shows packet summary lines
and scanning through the list of all packets and adding to the Clist
those that match the filter.
Get rid of "if (dfilter_proto_tree)" test in "load_cap_file()";
"dfilter_proto_tree" is always FALSE, and all the test does is keep us
from doing a "gtk_clist_freeze()" of the packet list, and we don't want
to do that (we don't want the packet to be updated until we're done
reading in the file).
Get rid of "dfilter_proto_tree", as it's no longer used.
Move the test that checks whether the display filter matches the current
packet to "add_packet_to_packet_list()"; this allows us to run
"dissect_packet()" only once - if we have a display filter, we generate
the summary info *and* the protocol tree in the same call, using the
summary info to make the packet list item and the protocol tree when
checking the display filter.
In "dfilter_compile()", destroy "*p_dfcode" if it's not NULL, so we
don't leak memory.
svn path=/trunk/; revision=355
doesn't link with libpcap, so no packet captures can be made. The
"--disable-pcap" option has been added to the configure script. Docs
have been updated. And the string buffer size in the simple_dialog()
has been doubled so that Johan's e-mail address in the "About" dialogue
window doesn't get chopped off.
svn path=/trunk/; revision=351
mechanism that is built into ethereal. Wiretap is now used to read all
file formats. Libpcap is used only for capturing.
svn path=/trunk/; revision=342
Gilbert Ramirez