Mostly functioning proof of concept for #14329. This work is intended to
allow Wireshark to support multiple packet comments per packet.
Uses and expands upon the `wtap_block` API in `wiretap/wtap_opttypes.h`.
It attaches a `wtap_block` structure to `wtap_rec` in place of its
current `opt_comment` and `packet_verdict` members to hold OPT_COMMENT
and OPT_PKT_VERDICT option values.
This functionality has been added in d2a660d8, where its limitations
are described.
Improvements:
* the Substream index menu now properly filters for available stream numbers;
* Follow Stream selects the first stream in the current packet
Known issue (which is still there): if a packet contains multiple QUIC
streams, then we will show data also from streams other than the selected
one (see #16093)
Note that there is no way to follow a QUIC connection.
Close#17453
It is to tvb_reported_length_remaining() as
tvb_ensure_captured_length_remaining() is to
tvb_captured_length_remaining() - it throws an exception if the offset
is out of range.
(Note that an offset that's just past the end of the {reported,
captured} data is *not* out of range, it just means that there is no
data remaining. Anything *past* that is out of range and thus invalid.)
The circuit API was removed and replaced with the conversation
"_by_id" API that uses a single uint32 value by commit
800b26edbe
Remove the lingering references to circuits from the stream API,
since it's just used with conversations now.
When tshark enables synchronous resolution of IP addresses to names,
forces calls to maxmind_db_lookup_ipv4()/_ipv6() to block-wait for the
maxmind response.
Proposed fix for #14691.
This merge request adds:
* Decoding of ProtocolID and PPID in Component Status Protocol dissector.
* Moved SCTP PPID list from SCTP dissector into separate file sctpppids.c,
due to reuse in Component Status Protocol dissector.
* Export of sctpppid_val_ext containing the PPID list.
This pull request includes:
* The "Follow DCCP stream" feature.
* Updated docbook documentation for the "Follow DCCP stream" feature.
* Test for the feature.
* Corresponding packet trace for the test.
Save a copy of the pathname used to open a file in the wtap structure.
This allows the BER file reader to put a pointer to it in the
pseudo-header; it also would allow file readers to attempt to read
"associated" files that have the same name as the file, but with a
different extension.
Instead of having cf_open() special-case BER files, and calling a
routine in the BER dissector to specify the file name to the dissector,
have separate dissectors for "dissect packet payload as BER" and
"dissect a file as BER", and have the latter get the pathname of the
file from the pseudo-header and determine the ASN.1 syntax from that.
(Side-effect - this means that you can now dissect a BER file, and have
the syntax be determined by the file extension, in TShark as well; the
above cf_open() special-casing was *not* done in TShark, so it didn't
work before. Now the application code doesn't need to do any of that,
so it works in TShark as well as Wireshark.)
Instead *_register_plugin() is turned into a noop (with a warning).
The test suit is failing with ENABLE_PLUGINS=Off (it was already failing
before and this patch didn't affect that).
Closes#17202.
Pull the code to register plugin taps, and the loop to register built-in
taps, into a single register_all_tap_listeners() routine.
This leaves it up to libwireshark, not to the programs using it, to know
how to register them.
If you load a capture file and open any statistics dialog, you'll see the
list of collected items. Each time you press the Apply button (without entering a
display filter) another list of items will be created as a top-level entry
of the statistics tree. Only the first list will have the correct values,
all subsequent lists will not be populated.
Each statistic module defines a stat_tap_table_ui structure that contains a
stat_tap_init_cb function. This init function is called by
SimpleStatisticsDialog::fillTree before the tap listener is registered. This
happens each time we collect the statistics.
However, it seems that all init functions create a new stat_tap_table each
time they are called, even if they already have an existing stat_tap_table
of the same name.
This patch adds a stat_tap_find_table function to find a table by name.
As a first step, we update the ANSI A-I/F BSMAP Statistics to check if its
table is already registered. If it is, the table will not be created again.
Pull the value-formatting code in proto_custom_set into
proto_item_fill_display_label. Use that in FieldInformation::toString
instead of fvalue_to_string_repr. Fixes#16911.
Add support internally to using iconv (always present with glib) to convert
strings from various encodings to UTF-8 (using REPLACEMENT CHARACTER as
recommended), and use that to support GB 18030 and EUC-KR. Replace call
directly to iconv in ANSI 637 for EUC-KR to new API. Update comments
and documentation around character encodings. It is possible to replace
the calls to iconv with an internal decoder later. Tested on Linux and
on Windows (including with illegal characters). Closes#16630.
Implement the Unicode Standard "best practices" for replacing ill-formed
sequences with the Unicode REPLACEMENT CHARACTER. Add wmem_strbuf_append_len
for appending strings with embedded null characters. Clarify why
wmem_strbuf_grow() doesn't always ensure that there's enough room for
a new string, and short-circuit some tests there. Related to #14948
Add an encoding for "unpacked" 3GPP TS 23.038 7-bit strings, in which
each code position is in a byte of its own, rather than with the code
positions packed into 7 bits. Rename the packed encoding to explicitly
indicate that it's packed.
Add an encoding for ETSI TS 102 221 Annex A strings.
Use the new encodings.
Change-Id: I2fad824ca417dcd089fabfdf06f28529c7ee9e87
Signed-off-by: Filipe Laíns <lains@archlinux.org>
Reviewed-on: https://code.wireshark.org/review/37949
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
There cases where we may want to pre-allocate some memory before
appending all the fields.
Change-Id: Ic46e83733d4338dbda45b2ca3ff2d533c5b44026
Signed-off-by: Filipe Laíns <lains@archlinux.org>
Reviewed-on: https://code.wireshark.org/review/38122
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
format_text(alloc, string, strlen(string)) is a common idiom; provide
format_text_string(), which does the strlen(string) for you. (Any
string used in a %s to set the text of a protocol tree item, if it was
directly extracted from the packet, should be run through a format_text
routine, to ensure that it's valid UTF-8 and that control characters are
handled correctly.)
Update comments while we're at it.
Change-Id: Ia8549efa1c96510ffce97178ed4ff7be4b02eb6e
Reviewed-on: https://code.wireshark.org/review/38202
Petri-Dish: Guy Harris <gharris@sonic.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <gharris@sonic.net>
'check_tfs.py --common' can look for tfs values that appear multiple times.
Current output prior to these dssector changes was:
('No Extension', 'Extension') appears 3 times in: ['epan/dissectors/packet-bssap.c', 'epan/dissectors/packet-camel.c', 'epan/dissectors/packet-gsm_map.c']
('Optimised for signalling traffic', 'Not optimised for signalling traffic') appears 3 times in: ['epan/dissectors/packet-gsm_a_gm.c', 'epan/dissectors/packet-gsm_map.c', 'epan/dissectors/packet-gtp.c']
('Data PDU', 'Control PDU') appears 3 times in: ['epan/dissectors/packet-pdcp-lte.c', 'epan/dissectors/packet-pdcp-nr.c', 'epan/dissectors/packet-rlc-nr.c']
('Message sent to originating side', 'Message sent from originating side') appears 3 times in: ['epan/dissectors/packet-q2931.c', 'epan/dissectors/packet-q931.c', 'epan/dissectors/packet-q933.c']
('User', 'Provider') appears 3 times in: ['epan/dissectors/packet-q2931.c', 'epan/dissectors/packet-q931.c', 'epan/dissectors/packet-q933.c']
The first and last ones were made common, the others seem a little too specialised.
Checking some of the existing items in tfs.c (using QtCreator's 'Find Usages'),
some of the common items are used a lot, but many of them are not referenced.
Change-Id: Ia4006d2c4fa7cafbc3b004dc7a367a986dbeb0c4
Reviewed-on: https://code.wireshark.org/review/38177
Petri-Dish: Martin Mathieson <martin.r.mathieson@googlemail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Export proto_item_set_bits_offset_len and fix
In file included from ../epan/dfilter/dfilter.h:18:
../epan/proto.h:1113:11: warning: parameter 'bits_offset' is already documented [-Wdocumentation]
* @param bits_offset The new length in bits.
^~~~~~~~~~~
../epan/proto.h:1112:5: note: previous documentation
* @param bits_offset The number of bits from the beginning of the field.
^ ~~~~~~~~~~~
Change-Id: Ib171ce38607b9656baea5eb7a3e6aee3b99ddbac
Reviewed-on: https://code.wireshark.org/review/38115
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The decode_as_list is built at startup and contains all protocols
registered for "decode as". Do not clear this list on profile change,
only on exit.
Bug: 16635
Change-Id: I832a042327603ae0f01b10ab620fccc03d4fd3a3
Reviewed-on: https://code.wireshark.org/review/37579
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
The LUA API provides the "set_color_filter_slot" function, but without
a corresponding "get_" function, it's very hard for two LUA dissectors
to co-exist without one overwriting any color filters set by the other.
It also looks like the documentation comment for
"set_color_filter_slot" had an off-by-one error, which I've corrected
as I was adding almost identical documentation for the new API.
Change-Id: Ic54d23be555ec12e1830bbe6f84a1b04d04fd4f0
Reviewed-on: https://code.wireshark.org/review/37511
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Remove some unused defines, function parameters and functions.
Change-Id: I1bbc3ff7e0a9d11e8521ddf24b35113d8e332f08
Reviewed-on: https://code.wireshark.org/review/37305
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add some ENC_ values for various flavors of packed BCD, and use that
instead of explicitly calling tvb_bcd_dig_to_wmem_packet_str() and
adding the result.
Change-Id: I07511d9d09c9231b610c121cd6ffb3b16fb017a9
Reviewed-on: https://code.wireshark.org/review/36952
Reviewed-by: Guy Harris <gharris@sonic.net>
Add proto_item_get_display_repr(), which returns a string, allocated
with a specified wmem scope, containing the display representation of
the value of a proto_item.
Use it in the LLDP dissector, to append that string to the parent
protocol tree item; use packet scope, so it doesn't hang around forever
(the previous code used the NULL scope, meaning explicit freeing was
required, but it wasn't explicitly freeing the value, so it was
leaking).
Change-Id: I146380118833b1daef9dea8bd9463001e5b9325f
Reviewed-on: https://code.wireshark.org/review/36931
Petri-Dish: Guy Harris <gharris@sonic.net>
Reviewed-by: Guy Harris <gharris@sonic.net>
true_false_strings have no helper function to properly retrieve the
string representing the true or false value, much like unit_strings,
even though this is not uncommon in dissectors.
This change introduces the helper function and modifies the dissectors,
so that they use this helper i.s.o. their own expressions.
Change-Id: I477ed2d90a9a529fc5dcfef7e3ea42ec180d27ae
Reviewed-on: https://code.wireshark.org/review/36920
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Petri-Dish: Jaap Keuter <jaap.keuter@xs4all.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add convenience routines for getting and setting a per-protocol,
per-packet depth value, which can be used to limit recursion, nesting,
cycling, etc. Use them in the BACapp, DAAP, Mongo, VLAN, and WBXML
dissectors.
Change-Id: I172514828169253ae7fcf9162c9d7eeb3041ff9c
Reviewed-on: https://code.wireshark.org/review/36846
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
1. Switch list of manually resolved names from a list to a map
(IP Address --> Custom Hostname)
2. If an address was already in the list, just update the old entry.
Previously this added a new entry anytime somebody would edit a
hostname.
3. Display the previous hostname in the GUI
4. Remove unused manually_resolve_cleanup()
Bug: 11221
Change-Id: I42d5b6267eb6613bdf7783865bc2d30d6bda1147
Reviewed-on: https://code.wireshark.org/review/36059
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Two enhancements and one fixed bug:
1. Add dissecting protobuf fields as wireshark (header) fields preferences. User
can input the full names of protobuf fields or messages in Filter toolbar for
searching.
2. Add 'protobuf_field' dissector table. Dissector based on protobuf can register
itself to 'protobuf_field' keyed with the full names of fields of BYETS or STRING
types.
3. A bug about search MESSAGE or ENUM type in context is fixed.
4. Another small enhancement is adding prefs_set_preference_effect_fields() which
can mark a preference that affects fields change (triggering FieldsChanged event).
See the linked bug for sample capture file and .proto files.
Ping-Bug: 16209
Change-Id: Ibc3c45a6d596a8bb983b0d847dd6a22801af7e04
Reviewed-on: https://code.wireshark.org/review/35111
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
It's a "wmem version" of format_size (from wsutil/str_util.h).
Also improved the flexibility in formatting of format_size() to handle future
needs of format_size_wmem
Ping-Bug: 15360
Change-Id: Id9977bbd7ec29375bbac955f685d46e75b0cef2c
Reviewed-on: https://code.wireshark.org/review/31233
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
If a ProtoField object was created, but not linked to a Proto, then the
strings field and all elements (depending on type) would leak.
This is a follow-up to g79fef2ae and fixes the real issue in g44870fb1.
Change-Id: I01880a92bb20fae45f68c754b07daeb07630deec
Reviewed-on: https://code.wireshark.org/review/34872
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Vasil Velichkov <vvvelichkov@gmail.com>
Reviewed-by: Roland Knall <rknall@gmail.com>
1. Add show_details preferences. Disable it will hidden names of
message/field/enum, field number, and other details.
2. Have only one popup message with all the errors listed,
that are found during parsing .proto files. (Buffer errors and print once)
Loading .proto files and checking message types of UDP port will
be done only when protobuf dissector has been called.
3. Support parsing .proto files in legacy MAC file format
(that newline is '\r') or mixed newline (\r + \n) file format.
Change-Id: I97bcde000957e4cd1cce98a7f61120d03027423e
Reviewed-on: https://code.wireshark.org/review/34736
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The QUIC transport protocol provides a stream, similar to HTTP/2. Make
it possible to look at the stream contents. This can be helpful while
HTTP/3 support is not yet complete.
Known issues that will be addressed in the future:
- If a single packet contains multiple streams, then Follow QUIC Stream
will wrongly include data from streams other than the selected one.
This is tracked by bug 16093 and affects HTTP/2 as well.
- The Substream index menu does not properly filter for available
stream numbers. If a non-existing stream is selected, then changing
to another (potentially valid) index results in the "Capture file
invalid." error. As workaround, clear the display filter first.
- Follow Stream always selects Stream ID 0 instead of the first or
currently selected stream field in a packet. Users should manually
update the stream index as needed.
Change-Id: I5866be380d58c96f0a71a29abdbd1be20ae3534a
Ping-Bug: 13881
Reviewed-on: https://code.wireshark.org/review/34694
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
David Perry
Pau Espin