After some experimentation results with GCC and clang seem poor, compilation
times are terrible and I don't feel confident enabling it by default yet. More
testing is needed.
Replace most instances of ws_debug_printf() except in
epan/dissectors and dissector plugins.
Some replacements use printf(), some use ws_debug(), and
some were removed because they were dead or judged to be
temporary.
Currently our build generates very many warnings if
G_DISABLE_ASSERT is defined.
Add ws_assert() and ws_assert_not_reached() to incrementally
replace existing assertions and then disable them using
WS_DISABLE_ASSERT.
Assertions are disabled with CMake build type Release.
By default the build type is RelWithDebInfo so the current
behaviour of enabling assertions by default is (for now) preserved.
Add some notes to README.Developer.
C-ares has been mandatory since 451a241e50. Remove some checks that are
no longer needed.
Rename OPTIONAL_DLLS to THIRD_PARTY_DLLS and OPTIONAL_PDBS to
THIRD_PARTY_PDBS in CMakeLists.txt, which is more accurate.
As described at
https://medium.com/@alasher/colored-c-compiler-output-with-ninja-clang-gcc-10bfe7f2b949
both Clang and gcc generate colorized output when they detect a
terminal, but not for piped output, which is the case when using Ninja.
Add an ENABLE_COMPILER_COLOR_DIAGNOSTICS CMake option, and set it to
"ON" when we're using Ninja.
In the merge-req:ubuntu-gcc-ctest and merge-req:ubuntu-clang-other-tests
GitLab CI jobs, generate colorized HTML report artifacts using
ansi2html.
New link type DLT_ETW is added for write and read Event Trace on Windows.
This change updates MBIM dissector to decode a MBIM message from
a DLT_ETW packet.
It's possible to play opus payload with libopus (https://opus-codec.org/).
Closes#16882.
Helped-by: Pascal Quantin <pascal.quantin@gmail.com>
Signed-off-by: Lin Sun <lin.sun@zoom.us>
Signed-off-by: Yuanzhi Li <ryanlee@mail.ustc.edu.cn>
Enable Link Time Optimization, also known as Interprocedural Optimization
if the compiler supports it.
Added a CMake option (ENABLE_LTO), defaulted to ON only on Windows
Change-Id: Iea02b00aac12cc9a62595eeb8ff52382f1c4ddcd
Reviewed-on: https://code.wireshark.org/review/37573
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
pcapng has been the compile-time default since 2011. If there are any
users who would like to use the libpcap format, then they should use
runtime options instead (e.g. `tshark -P` or `editcap -F pcap`).
Change-Id: I54b70368cdc3ca78bc8617bc488cc687740a1eb9
Reviewed-on: https://code.wireshark.org/review/36721
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <gharris@sonic.net>
It is possible to decode iLBC payload. It uses libilbc library (https://github.com/TimothyGu/libilbc).
Bug: 16314
Change-Id: Id4cad7ae32305a0e94ef32beb24e07733d7f834e
Reviewed-on: https://code.wireshark.org/review/35686
Reviewed-by: João Valverde <j@v6e.pt>
Petri-Dish: Pascal Quantin <pascal@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add support for automatic updates using the Sparkle framework. Add
FindSparkle.cmake and associated CMake plumbing. Add a public key and
other info to Info.plist.in. Add ui/macosx/sparkle_bridge.{h,m}, which
wraps the Sparkle API. Make code that's specific to WinSparkle
Windows-only.
Add Sparkle installation steps to the macos-setup scripts. Sparkle
prints a warning if your bundle is unsigned (which is the case during
development) so disable installing it by default.
Updating here takes a long time. We might be able to fix that by
shipping our DSYMs separately.
Change-Id: I6cc6671db5657dadc514bda6bf6e1c8bbc9468a5
Reviewed-on: https://code.wireshark.org/review/35090
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Allow easy import of profiles. Profiles must be stored inside
a zip file, with no additional hierarchy.
Change-Id: I0ae77460c20ef6b3e447906e671b0cefa6b9b032
Reviewed-on: https://code.wireshark.org/review/33881
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
USE_STATIC will:
- always link statically with external libraries (such as glib2)
- will not set rpath to avoid the following error:
CMake Error at cmake_install.cmake:50 (file):
file RPATH_CHANGE could not write new RPATH:
/usr/lib
to the file:
/home/fabrice/br-test-pkg/br-arm-full-static/target/usr/bin/tshark
No valid ELF RPATH or RUNPATH entry exists in the file;
Change-Id: I242dc1a091cc211ee891568a2dee5080c9974fba
Ping-Bug: 15713
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-on: https://code.wireshark.org/review/32945
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Add support for loading RSA private key files from PKCS #11 tokens,
identified by PKCS #11 URIs. Add a new 'pkcs11_libs' UAT which can
dynamically load PKCS #11 provider libraries that are not found by
p11-kit.
The configuration GUI will need additional code to discover available
PKCS #11 tokens and will be added later.
This feature requires GnuTLS 3.4 with PKCS #11 support, so Windows,
macOS via Homebrew, Ubuntu 16.04, Debian Stretch. Not supported: RHEL7.
Currently macOS via official packages disables PKCS #11 support, so that
will also not work.
Change-Id: I20646bfd69c6bd13c8c2d27cb65c164a4b0b7a66
Reviewed-on: https://code.wireshark.org/review/30855
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
The current fuzzshark target built by CMake is not usable for fuzzing.
Address this by adding a new ENABLE_FUZZER option that enables mandatory
instrumentation and libFuzzer linking options for the fuzzshark binary.
Create more CMake targets for specific fuzzing targets such as
fuzzshark_ip and fuzzshark_ip_proto-udp. These targets are not built by
default, either build individual targets or use the all-fuzzers target.
Now these binaries are not specific to oss-fuzz, so move them to a new
directory (perhaps the corpora can be added here in the future).
oss-fuzz build.sh is simplified and reuses the CMake targets.
When OSS_FUZZ is set, it will force static linking with external
libraries and limit parallel linker jobs (maybe not necessary for
Google's oss-fuzz builders, but my 8G/6c VM ran out of memory).
Change-Id: If3ba8f60ea1f5c3bd2131223050a81f9acbce05d
Reviewed-on: https://code.wireshark.org/review/30228
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add an sdjournal extcap, which reads journal entries using the
sd-journal API and dumps them as journal Export Format records.
Change-Id: I17ccfa88ab5d053c16c869cd26e580d84022502e
Reviewed-on: https://code.wireshark.org/review/29479
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
MaxMind is discontinuing its legacy databases in April in favor of
GeoIP2, which use a newer database format (MaxMind DB). The reference C
library (libmaxminddb) is available under the Apache 2.0 license which
isn't quite compatible with ours.
Add mmdbresolve, a utility that reads IPv4 and IPv6 addresses on stdin
and prints resolved information on stdout. Place it under a liberal
license (MIT) so that we can keep libmaxminddb at arm's length. Add
epan/maxmind_db.[ch], which spawns mmdbresolve and communicates with it
via stdio.
Migrate the preferences and documentation to MaxMindDB.
Change the IPv4 and IPv6 asnum fields to FT_UINT32s. Change the
geographic coordinate fields to FT_DOUBLEs.
Bug: 10658
Change-Id: I24aeed637bea1b41d173270bda413af230f4425f
Reviewed-on: https://code.wireshark.org/review/26214
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Switch the markup text processor for files in the docbook directory from
AsciiDoc to Asciidoctor. Asciidoctor has several useful features (such
as direct PDF output) and is actively developed. It's written in Ruby
but that dependency can be sidestepped with AsciidoctorJ, a
self-contained bundle that only depends on the JRE.
The current toolchain targets require Python, AsciiDoc, DocBook XML,
DocBook XSL, Java, FOP, xsltproc, lynx, and the HTMLHelp compiler:
HTML: AsciiDoc → DocBook XML → xsltproc + DocBook XSL
Chunked HTML: AsciiDoc → DocBook XML → xsltproc + DocBook XSL
PDF: AsciiDoc → DocBook XML → xsltproc + DocBook XSL → FOP
HTMLHelp: AsciiDoc → DocBook XML → xsltproc + DocBook XSL → HHC
This change removes the AsciiDoc and FOP requirements and adds either
AsciidoctorJ or Asciidoctor + Ruby:
HTML: Asciidoctor → DocBook XML → xsltproc + DocBook XSL
Chunked HTML: Asciidoctor → DocBook XML → xsltproc + DocBook XSL
PDF: Asciidoctor
HTMLHelp: Asciidoctor → DocBook XML → xsltproc + DocBook XSL → HHC
Ideally we could generate all of these using AsciidoctorJ, Java, and
lynx. Unfortunately we're not there yet.
The release notes depend on several macros (ws-buglink, ws-salink,
cve-idlink, sort-and-group). Add Asciidoctor (Ruby) equivalents.
Remove the BUILD_xxx_GUIDES CMake options and add various output targets
automatically. This means that you have to build the various documentation
targets explicitly.
Change-Id: I31930677a656b99b1c6839bb6c33a13db951eb9a
Reviewed-on: https://code.wireshark.org/review/25668
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
At one point, I remember a discussion resulting in the official name of
the next-generation replacement for pcap format being changed to
"pcapng", with no hyphen.
Make Wireshark reflect that.
Change-Id: Ie66fb13a0fe3a8682143106dab601952e9154e2a
Reviewed-on: https://code.wireshark.org/review/25214
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add ENABLE_TSAN and enable-tsan options to CMake and Autotools
respectively which enable ThreadSanitizer, similar to AddressSanitizer
and UndefinedBehaviorSanitizer.
Change-Id: I79adf5c1516b0938f140bbf501c181bf14d7619b
Reviewed-on: https://code.wireshark.org/review/24515
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
This sets the scope of the static build option to Wireshark support
libraries only.
Before the patch:
Static plugins don't work with CMake and autotools.
autotools static build is broken, and most likely will always be, as
building Wireshark all-static is difficult and time-consuming.
After the patch:
For CMake Wireshark will be built with static or shared libraries and
dynamic plugins. Everything just works. CMake apparently doesn't want
you building static and shared libraries at the same time.
For autotools Wireshark will be built with shared libraries by default.
--disable-shared and --enable-static options work as usual. Dlopened
plugins are not built if --disable-shared is given to configure (to
disable shared libraries). This is a limitations imposed by libtool.
Tested on Linux. This removes broken support for building plugins
statically.
Change-Id: Ib8e8176976f136eea93a2ce8f9857b6cf9bec64c
Reviewed-on: https://code.wireshark.org/review/24241
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Remove options that aren't supported on Windows
Don't use pkgconfig on Windows
Change-Id: I79718a1c43f56a9ec88f690490931b80b727dd68
Reviewed-on: https://code.wireshark.org/review/24481
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
In some editors (like Xcode) it's possible to turn on and off
ASAN and UBSAN independent of the settings in CMake.
This option will disable the -Wframe-larger-than= flag even if
ASAN or UBSAN are not turned on in CMake.
Change-Id: I70b1ae544fe87093d0f5ce7ceb191f33399191ea
Reviewed-on: https://code.wireshark.org/review/23567
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Allow nghttp2 to be disabled, similar to --without-nghttp2.
Change-Id: Id27ab12ef7c24a535824f762ce2feb20fba9e065
Reviewed-on: https://code.wireshark.org/review/23247
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Adjust the following CMake and Autotools behaviors in order to
synchronize their respective install behaviors:
- Disable tfshark by default in CMakeOptions.txt
- Add profiles/Bluetooth/preferences to Makefile.am
- Add missing captype and ciscodump entries to doc/Makefile.am
- Install help/faq.txt on all platforms in CMakeLists.txt
- Add BUILD_corbaidl2wrs, BUILD_dcerpcidl2wrs, and BUILD_xxx2deb
options to CMake and use them to adjust the corresponding parts
of the build.
- Pull the DCERPC idl2wrs build steps into the top-level
CMakeLists.txt.
This change doesn't sync everything. Some installed content still
diverges, including the following:
- CMake installs a bunch of modules into lib/wireshark:
FindGLIB2.cmake
FindWireshark.cmake
FindWSWinLibs.cmake
LocatePythonModule.cmake
UseAsn2Wrs.cmake
UseMakeDissectorReg.cmake
WiresharkConfig.cmake
WiresharkConfigVersion.cmake
Do we need any or all of these? If so, should the Autotools behavior
be synced accordingly?
- Autotools installs libtool .la files. It also installs
wireshark-gtk.desktop unconditionally.
Change-Id: I7846efe08f7139c31b6ceca6f08a1fa5168b3e22
Reviewed-on: https://code.wireshark.org/review/23041
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
UndefinedBehaviorSanitizer (UBSan) can catch a lot of issues
(out-of-bounds memory access, integer overflows, undefined shifts,
etc.) and is recommended during development using GCC or Clang. Add an
option for it (similar to ASAN support).
Change-Id: Ib0db50cee9eb5af0f5c4f06e07f3899a3a34702d
Reviewed-on: https://code.wireshark.org/review/21673
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
This can be used by dissectors that need to parse out-of-band
configuration.
Change-Id: I13c0a2f408fb5c21bad7ab3d7971e0fa8ed7d783
Reviewed-on: https://code.wireshark.org/review/20912
Reviewed-by: Roland Knall <rknall@gmail.com>
Avoid anachronisms, however; there was no "macOS 10.0" or even "OS X
10.0", for example. It was "Mac OS X" until 10.8 (although 10.7 was
sometimes called "OS X" and sometimes called "Mac OS X"), and it was "OS
X" from 10.8 to 10.11.
Change-Id: Ie4a848997dcc6c45c2245c1fb84ec526032375c3
Reviewed-on: https://code.wireshark.org/review/20933
Reviewed-by: Guy Harris <guy@alum.mit.edu>
It has been unsupported for some years and when talking about removing it
in the past I received some positive and no negative feedback.
There is one instance of echld left:
capchild/capture_sync.c: * echld might have already reaped the child.
Can that case be removed or should be comment be updated to something more
accurate? (left for a separate patch)
Change-Id: Idac397158dd86fd0728eb95379449ee4a463fc28
Reviewed-on: https://code.wireshark.org/review/20619
Petri-Dish: Jörg Mayer <jmayer@loplof.de>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Creates an interface for plugins and other parts of the code, to
add a new toolbar to the system and have various widget types interact
with this toolbar.
All toolbars added via this interface, will be added to an additional
submenu called "Additional Toolbars" within Wireshark.
Also a demo plugin is being provided, demonstrating various features
of the toolbar, including updating the gui elements. It also demonstrates
how to update toolbar items.
Change-Id: I8d0351224b3d7f4b90220d58970b51695551d7e3
Reviewed-on: https://code.wireshark.org/review/19803
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Removed all guards for HAVE_LIBGCRYPT, change autotools and CMake to
error out if it is not available. Update release notes, developer
documentation and README with the new status. Clarify relation with
GnuTLS in macosx-setup.sh. Install Libgcrypt via brew script.
Motivation for this change is that many dissectors depend on Libgcrypt
and having it optional increases the maintenance burden (there have been
several compile issues in the past due to the optional status).
Furthermore, wsutil has crypto code that can be replaced by Libgcrypt.
Change-Id: Idf0021b8c4cd5db70b8766f7dcc2a8b3acbf042f
Link: https://www.wireshark.org/lists/wireshark-dev/201702/msg00011.html
Reviewed-on: https://code.wireshark.org/review/20030
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Integrate the Spandsp library for G.722 and G.726 support. Adds support
for G.722 and all eight variants of G.726.
Note: this also fixes a crash in Qt (buffer overrun, reading too much
data) caused by confusion of the larger output buffer (resample_buff)
with the smaller input buffer (decode_buff). It was not triggered before
because the sample rate was always 8k, but with the addition of the new
codecs, a different sample rate became possible (16k).
Fix also a crash which occurs when the RTP_STREAM_DEBUG macro is enabled
and the VOIP Calls dialog is opened (the begin frame, start_fd, is not
yet known and therfore a NULL dereference could occur).
Passes testing (plays normally without bad RTP timing errors) with
SampleCaptures files: sip-rtp-g722.pcap and sip-rtp-g726.pcap. Tested
with cmake (Qt), autotools (Qt and GTK+) with ASAN enabled.
Bug: 5619
Change-Id: I5661908d193927bba50901079119eeff0c04991f
Reviewed-on: https://code.wireshark.org/review/18939
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Add an option to check for and use ccache. Disable it by default.
Change-Id: Ifc928d22715b7e06e53115455b31dbeaf2ee8332
Reviewed-on: https://code.wireshark.org/review/18715
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
João Valverde