Move WiresharkApplication.{cpp,h} to MainApplication.{cpp,h}. Add back
WiresharkApplication as a thin superclass of MainApplication, similar to
LogsharkApplication. Change all of our wsApp references to mainApp. We
will likely have to change many or most of them back, but that's a
commit for another time.
The distinction between the different kinds of capture utility
may not warrant a special subfolfer for each, and sometimes the
distinction is not be clear or some functions could stradle
multiple "categories" (like capture_ifinfo.[ch]).
Simplify by having only a generic 'capture' subfolder. The
separate CMake libraries are kept as a way to reuse object code
efficiently.
Remove the editor modeline blocks from most of the source files in ui/qt
by running
perl -i -p0e 's{ \n+ /[ *\n]+ editor \s+ modelines .* shiftwidth= .* \*/ \s+ } {\n}gsix' $( ag -g '\.(cpp|h)' )
then cleaning up the remaining files by hand.
This *shouldn't* affect anyone since
- All of the source files in ui/qt use 4 space indentation, which
matches the default in our top-level .editorconfig
- The one notable editor that's likely to be used on these files and
*doesn't* support EditorConfig (Qt Creator) defaults to 4 space
indentation.
Fix the following deprecation issues for Qt 5.15:
Use Qt::WindowFlags() instead of 0 in Qt >= 5.6.
Pass Qt::SkipEmptyParts instead of QString::SkipEmptyParts to QString::split() in Qt >= 5.15.
Use QMultiMap instead of QMap where we were using QMap::uniqeKeys().
Use QCP::Interactions() instead of 0.
Use '\n' instead of QTextStream::endl.
Use QWheelEvent::angleDelta() instead of QWheelEvent::angle().
Change-Id: Ie2d69d3a396c0821c2c34f506ddad6f8e22f7049
Reviewed-on: https://code.wireshark.org/review/37334
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Have ws80211_init() return an indication that channel setting isn't
supported on those platforms.
In dumpcap, try to set up ws80211 before checking the channel argument
and, if it fails, report the failure, rather than failing because the
"convert channel name to channel code" routine fails.
See
https://ask.wireshark.org/question/15535/dumpcap-k-is-not-accepting-channel-type-values/
for an example of confusion caused by the previous behavior.
Change-Id: I303f560704700bbcd4f0ecea041f8632744212f3
Reviewed-on: https://code.wireshark.org/review/36659
Petri-Dish: Guy Harris <gharris@sonic.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <gharris@sonic.net>
PreferencesDialog::setPane takes a preference module name. Fix a
comparison in PrefModuleTreeView::setPane and update some variable names
in order to make things a bit more obvious.
Modernize some related code while we're here.
Bug: 16250
Change-Id: I8f4c7e5261a219e3f32e6e9a71574d81b1852219
Reviewed-on: https://code.wireshark.org/review/35304
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Currently push pop is propagated by a massive load of signals
which partly are also propagated through parent objects.
This moves the status handling to WiresharkApplication, also
pathlining future moves to move status to different classes or
use additional methods of status information
Change-Id: Ibcb2c98688f1adf40dce1483f336596ef992bb06
Reviewed-on: https://code.wireshark.org/review/35071
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
The wireless toolbar retrieves the full list of network interfaces
every 1.5 seconds to keep its list of interfaces updated. This
not only adds unnecessary load on the system it also generates
plenty of netlink traffic. When capturing packets on nlmon
interfaces they are flooded with packets generated by Wireshark
itself making it hard to understand the traffic that's really present
on the system.
Remove the periodic interface update and instead listen to network
interface change events and update only when something has changed.
The wireless toolbar need to know all when wireless interfaces are
added/removed, not only whether an interface is 'up' or not so
iface_monitor changes were also necessary.
Bug: 15576
Change-Id: I8fb19fd919dfef1b6b35bf48790b105ecd2b60a8
Reviewed-on: https://code.wireshark.org/review/32350
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Move */ to a separate line below the SPDX identifier.
Change-Id: Id1032215449cfccae0933147b45e04b65e0b727f
Reviewed-on: https://code.wireshark.org/review/27211
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Qt 5.11 seems to have changed the include dependencies, so adding those, that are missing
Change-Id: I2b0482f7554467d6981be65bfd3fea1a3e118976
Reviewed-on: https://code.wireshark.org/review/27145
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
The first is deprecated, as per https://spdx.org/licenses/.
Change-Id: I8e21e1d32d09b8b94b93a2dc9fbdde5ffeba6bed
Reviewed-on: https://code.wireshark.org/review/25661
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
In preparation for possibly using AUTOUIC in CMake which treats "ui_*.h"
files specially, rename ui_util.h. No other changes.
Change-Id: Id026572c000b713ff0e9388dc7fff8d81d4df73e
Reviewed-on: https://code.wireshark.org/review/23916
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
The array of ws80211_interface:s is not freed when the wireless
frame is destroyed causing minor leaks. Fix leaks by freeing the
array using appropriate utility function.
Bug: 14071
Change-Id: I35ec578062bfee4a4f0d0ac05a6d7613996a8822
Reviewed-on: https://code.wireshark.org/review/23738
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Change-Id: I0dbf8d0236b163da568a173ccedc3072bd039caa
Reviewed-on: https://code.wireshark.org/review/20739
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Remove unnecessary Q_DECLARE_METATYPE macros and replace calls
to QVariant conversions with VariantPointer where necessary
Change-Id: Ia4690590095f930bf94644197de7fa30b00ee7ec
Reviewed-on: https://code.wireshark.org/review/19611
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Incorrect define HAVE_PCAP was checked for. That one was
never set even with PCAP enabled and thus broke the wireless
toolbar functionality.
Change-Id: I856c836de75b198340661d5e5b734c7d8ada70ac
Reviewed-on: https://code.wireshark.org/review/18335
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Both the QT and GTK wireless toolbar used "-1" to indicate unused
channel parameters. This was an undocumented feature that recently
stopped working. Use the now documented way (NULL) to specify that
some parameters are not used.
Bug: 12896
Change-Id: I4a93a15ba1d880592b355b7eca155632a4b92ea0
Reviewed-on: https://code.wireshark.org/review/17700
Reviewed-by: Gilbert Ramirez <gram@alumni.rice.edu>
Petri-Dish: Gilbert Ramirez <gram@alumni.rice.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Make our timerEvent code more consistent. Make sure we use timer IDs and
that we call our base class timerEvent everywhere.
Change-Id: Ib67daa459a8a2f9b67487c3952b7b35c7f162f7e
Reviewed-on: https://code.wireshark.org/review/14480
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Call QTreeWidget::timerEvent from ProtoTree::timerEvent, otherwise we
turn into the candy factory episode in I Love Lucy.
Do the equivalent in WirelessFrame while we're here. Neither QFrame or
QWidget use timers, but there's no guarantee that this will be the case
in the future.
Bug: 12258
Change-Id: I3cb0096fe2ed87176fec8d7361260b5388d75530
Reviewed-on: https://code.wireshark.org/review/14470
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jim Young <jim.young.ws@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add UI support for selecting 80MHz and 160MHz channel bandwidth to
wireless toolbar. 80+80MHz was left out on purpose since will need
updated UI to select the second center frequency. For 80MHz and
160MHz bandwidth the center frequency is calculated from selected
control frequency.
Change-Id: I2551ba396f732b3240d40dfa6ea1cf2617b799d2
Reviewed-on: https://code.wireshark.org/review/13965
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Add dumpcap support for configuring 80MHz, 80+80MHz, 160MHz monitor
modes via nl80211.
Change-Id: I2ae8955670c2a9b5051e2223d45ce522459f2c5f
Reviewed-on: https://code.wireshark.org/review/13964
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Split interface get and set activity into explicit getInterfaceInfo and
setInterfaceInfo member functions. Make sure we connect to QComboBox
"activated" signals (which are only triggered by user activity)
instead of "currentIndexChanged" signals (which are triggered on
any change). Hopefully this will make the wireless toolbar read-only
until the user selects a combobox item.
Bug: 11487
Change-Id: I236ff3f5972b0b7d543f21bb955d7892190a7814
Reviewed-on: https://code.wireshark.org/review/10918
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Change-Id: I6298b3de5f0a1cb988014ff16082eaf8c2a3c3c0
Reviewed-on: https://code.wireshark.org/review/10786
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
this should make Visual Studio pick up the generated include files
from the build directory instead of the source directory (which may
contain lefovers from an in-tree build)
Change-Id: Ie3de4cdd85a2865e203118a42ab10f443372f03b
Reviewed-on: https://code.wireshark.org/review/9129
Petri-Dish: Martin Kaiser <wireshark@kaiser.cx>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This should hopefully fix compilation on OS X.
Change-Id: I621c92499232dafb6d6db867615baed8dc81eb17
Reviewed-on: https://code.wireshark.org/review/8947
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add the wireless toolbar to the Qt UI.
Start adding AirPcap support to ui/80211_utils. Add FCS validation
routines to ws80211_utils.
Move a bunch of AirPcap routines that require epan from caputils to
ui/gtk. They were required for driver key management, which we'll
leave to the AirPcap Control Panel in the Qt UI.
Move frequency-utils to wsutil.
Change-Id: I44446758046621d183f5c2ba9f6526bf01e084f1
Reviewed-on: https://code.wireshark.org/review/8910
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Gerald Combs