Signals/Slots should be initialized by the utilizing class not
the parent class. That way the utilizing class can be changed
without interfering with the parent
Change-Id: I5d538b4c487d3092f0f76bc2b54bc63fbc3ba547
Reviewed-on: https://code.wireshark.org/review/35015
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
When using the "Create a new file automatically" feature the capture in
Wireshark will stop and start, but the extcap utility will continue run
as normal. Ensure the control channels are kept when doing this.
Rename the unused capture_session.session_started to session_will_restart
to detect this.
Bug: 16178
Change-Id: I6797c982760a1013fca2a24699befff1dc82f28c
Reviewed-on: https://code.wireshark.org/review/35013
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
Better aling buttons in the DisplayFilterEdit and make loading
less artifact-prone
Change-Id: Ic5a5b0214185ed193e4b2290295225f54842c632
Reviewed-on: https://code.wireshark.org/review/35000
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
For the same reason as in g89c9d909.
Change-Id: I5e344ebdf8ba05d169484aa32b409d84edc6124f
Reviewed-on: https://code.wireshark.org/review/34943
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Show the dialogs asynchronously so no new event loops are created. This
not only simplifies stack traces (reduces the nesting level) but also
prevents hard to debug problems (eg. Bug 15743) from happening.
Change-Id: I85821a1403839a5baca504b40efce0ede2f1e0cb
Reviewed-on: https://code.wireshark.org/review/34646
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Using a simple (type *) cast on g_list_next results in a warning
with modern compilers "old-style cast"
Adding a warning for g_list_next and data access to avoid the warning
A good overview why reinterpret_cast has been used can be found here:
https://stackoverflow.com/questions/332030/when-should-static-cast-dynamic-cast-const-cast-and-reinterpret-cast-be-used
It is a 1:1 replacement in this case, but does not use any of the new
cast styles and therefore should be used with caution.
Change-Id: I989f237afc39aaf40133a788b1c0bbd7a51bf974
Reviewed-on: https://code.wireshark.org/review/34284
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
Also clarify the method by which the filter can be selected. From the
main menu only selected filters from a ProtoTree can be selected,
therefore the code for PacketList handling has been removed.
Change-Id: I5e5827d763ab3b25db14a384581f283238f96d28
Reviewed-on: https://code.wireshark.org/review/34384
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
The pointer returned by create_tempfile() must not be freed. As the
wtap_dump_open_tempfile() callers are freeing the returned filename,
duplicate the string so it can be freed.
Bug: 15377
Change-Id: Ib0b23aaee748ef67600ef3f7d40610ebbbec721c
Reviewed-on: https://code.wireshark.org/review/34272
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Make sure, that the main window only recognizes drop events containing
text/uri-list mime-types, as those are the only ones containing file
drops. All other mime-types (e.g. display filter drops) will be ignored
Bug: 15986
Change-Id: Id4338f75c563d2d177d858d2de470db1ab3499f7
Reviewed-on: https://code.wireshark.org/review/34248
Petri-Dish: Roland Knall <rknall@gmail.com>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
Do not call showHideMainWidgets() in initShowHideMainWidgets() because
this will override loaded recent values on startup.
Setting checked and visible based on recent values is done in layoutPanes()
and updateRecentActions().
This affects the following View settings: Main Toolbar, Filter Toolbar,
Wireless Toolbar, Status Bar, Packet List, Packet Details and Packet Bytes.
Also always hide empty_pane because it's never useful to show this.
Bug: 15976
Change-Id: Id63b8a5fdd263793a283137134f424d7cb4caf82
Reviewed-on: https://code.wireshark.org/review/34209
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
Exporting the model for the packetlist via a function prohibits implementing
further models (sorting) inside the packetlist
Change-Id: Ica159fc8f242ae1a5b657507a26e33827c366bee
Reviewed-on: https://code.wireshark.org/review/33834
Reviewed-by: Roland Knall <rknall@gmail.com>
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
General code cleanup
Change-Id: Ic99fc24b8f8c6142a7ec46f535f8d5b896236390
Reviewed-on: https://code.wireshark.org/review/33769
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Update our various welcome page style sheets when we receive an
ApplicationPaletteChange event.
It looks like ApplicationPaletteChange is the proper way to detect a
system-wide theme change, since we can infinitely recurse if we hold
things wrong inside a regular PaletteChange event (I'm guessing setting
CSS background and foreground colors were the culprits in this case).
Switch from PaletteChange to ApplicationPaletteChange everywhere.
Ping-Bug: 15511
Change-Id: I6e7aa627d9ca1d1d3872ab31620ea5c579061191
Reviewed-on: https://code.wireshark.org/review/33703
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Move plus-8.png to stock_icons/8x8 and rename it list-add.template.png
which conforms to the Freedesktop icon naming specifications and makes
it a template icon.
Update our style sheet when we recive a QEvent::PaletteChange.
Ping-Bug: 15511
Change-Id: I4b8ddcb4eb64f11faec21d5df4a3fd7fdc5cf488
Reviewed-on: https://code.wireshark.org/review/33626
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add support for ".template" icons, which are masked against the current
WindowText color. Convert the edit-find icons to templates.
Reload our icon(s) when we receive a QEvent::PaletteChange in MainWindow
and in StockIconToolButton.
Clean our SVGs.
To do:
- Convert other black or mostly black icons to templates.
- Handle QEvent::PaletteChange in more places.
Ping-Bug: 15511
Change-Id: I1ce78d92e769861dc38d86a3def5116fb869e2bf
Reviewed-on: https://code.wireshark.org/review/33571
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Draw a circle+backslash or a warning triangle in the far right of the
line edit entry for invalid and deprecated filters respectively. This
should provide an additional clue for color blind users.
Bug: 15326
Change-Id: I55a1e214834a340ccda3bfe8880bba12c5e274e9
Reviewed-on: https://code.wireshark.org/review/30936
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Make the time stamp precision a 4-bit bitfield, so, when combined with
the other bitfields, we have 32 bits. That means we put the flags at
the same structure level as the time stamp precision, so they can be
combined; that gets rid of an extra "flags." for references to the flags.
Put the two pointers next to each other, and after a multiple of 8 bytes
worth of other fields, so that there's no padding before or between them.
It's still not down to 64 bytes, which is the next lower power of 2, so
there's more work to do.
Change-Id: I6f3e9d9f6f48137bbee8f100c152d2c42adb8fbe
Reviewed-on: https://code.wireshark.org/review/31213
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Don't set the display filter combo's minimum size. This lets us show
more filter expression buttons.
Clear the filter expression toolbar before redrawing it. This gets rid
of a leftover artifact here on macOS.
Change-Id: Iab944e8992caf554e024521df52d0089a4501674
Reviewed-on: https://code.wireshark.org/review/30902
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Move all the compressed-file type stuff to wiretap/file_wrappers.c.
Rename wtap_compressed_file_extension() to
wtap_compression_type_extension() for consistency with the other
compression-type-extension routine names.
Move the declarations of the compression-type-extension routines in the
header file.
wtap_compression_type_extension() now returns NULL for
WTAP_UNCOMPRESSED; there's no need to special-case it.
Get rid of the now-unused wtap_compression_type_supported() and
WTAP_NUM_COMPRESSION_TYPES.
Change-Id: Ib93874079bea669a0c87104513dba0d21390455a
Reviewed-on: https://code.wireshark.org/review/30729
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add wtap_compressed_file_extension(), which returns NULL for
WTAP_UNCOMPRESSED and the appropriate file extension for other
compression types.
Add wtap_compression_type_supported(), which returns TRUE for
WTAP_UNCOMPRESSED and all supported compression types and FALSE
otherwise. ("Supported" means "the code can decompmress files in that
compression format and can write files in that compression format", so
WTAP_GAIP_COMPRESSED is supported iff libwiretap is built with zlib.)
In MainWindow::fileAddExtension, instead of checking for
WTAP_GZIP_COMPRESSED and using ".gz" as the extension, use the extension
returned by wtap_compressed_file_extension() for the compression type.
Change-Id: I47cb0eca8c887ada3562df30b54e76509008180f
Reviewed-on: https://code.wireshark.org/review/30707
Reviewed-by: Guy Harris <guy@alum.mit.edu>
compressed_file_extension shouldn't include the ".", as we insert the
"." before it.
Use it when appending the extension, rather than hardwiring "gz" in two
places.
Change-Id: I89e3ed1df9a8457fdbb6e6386686176816f4671b
Reviewed-on: https://code.wireshark.org/review/30682
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
If the file is to be compressed, then:
if the type in which the file is to be written has a set of extensions
it uses, leave the file name alone if it ends with one of those
extensions followed by the extension for the compression type,
otherwise append the default extension for that file type followed by
the extension for the compression type;
if it doesn't, leave the file name alone if it ends with the extension
for the compression type, otherwise append the extension for the
compression type;
otherwise:
if the type in which the file is to be written has a set of extensions
it uses, leave the file name alone if it ends with one of those
extensions, otherwise append the default extension for that file type followed by
the extension for the compression type;
if it doesn't, leave the file name alone if it ends with the extension
for the compression type, otherwise append the extension for the
compression type.
Change-Id: I7c4093af28cc30d579a2ae9faa8f4164b4764001
Reviewed-on: https://code.wireshark.org/review/30681
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change-Id: I08d45c87c9232edcabfc69d25a773552fe9e0871
Fixes: v2.9.0rc0-2567-g43872a3a0e (""." in version numbers and file names isn't translated into other languages.")
Reviewed-on: https://code.wireshark.org/review/30680
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
"xxx.pcap.gz" is "xxx.pcap.gz" in any language. "3.0.1" is "3.0.1" in
any language.
Change-Id: I231a3f9bd21a3ea5d56a8e410d20b1bc3927540f
Reviewed-on: https://code.wireshark.org/review/30676
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This:
1) means that we don't have to flag the compression argument with a
comment to indicate what it means (FALSE doesn't obviously say "not
compressed", WTAP_UNCOMPRESSED does);
2) leaves space in the interfaces in question for additional compression
types.
(No, this is not part 1 of an implementation of additional compression
types, it's just an API cleanup. Implementing additional compression
types involves significant work in libwiretap, as well as UI changes to
replace "compress the file" checkboxes with something to indicate *how*
to compress the file, or to always use some other form of compression).
Change-Id: I1d23dc720be10158e6b34f97baa247ba8a537abf
Reviewed-on: https://code.wireshark.org/review/30660
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
To mimic the behaviour we have with remote controls, we
hide the wireless toolbar if it cannot be used, instead
of displaying an empty toolbar with the information that
it is not supported
Change-Id: Iccb0bf78a29a2547adf2290198df8a1bf3450d82
Reviewed-on: https://code.wireshark.org/review/30455
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
The recently introduced %F in custom window title is empty when no
capture file is loaded. Check for this to avoid having a trailing
UTF8_EM_DASH or "[]" in the title.
Change-Id: I5fb0832a2898501cb128bd52b22a4dc5f3ad4f4e
Reviewed-on: https://code.wireshark.org/review/29800
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Rename the "ssl" protocol to "tls" and add an "ssl" alias. Prefer "TLS"
over "SSL" in user interface text and in the documentation.
Fix the test_tls_master_secret test while we're here.
Bug: 14922
Change-Id: Iab6ba2c7c4c0f8f6dd0f6d5d90fac5e9486612f8
Reviewed-on: https://code.wireshark.org/review/29649
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Replace $HOME with ~ in window title %F variable.
Optimize code to check if variable is used before doing replacement.
Change-Id: I95ef8505e50379d98fdb1661e09394d1ded7ecca
Reviewed-on: https://code.wireshark.org/review/29597
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Add some new variables to be used in custom window title.
%F = file path of the capture file
%S = a conditional separator (" - ") that only shows when surrounded
by variables with values or static text
Change-Id: I20a60a3018cc86236f4991030eadb7f51681cc32
Reviewed-on: https://code.wireshark.org/review/29534
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Remove MainWindow::createByteViewDialog, which was called once and
contained one line.
Change-Id: Ibe03db2c527b0a817d8b99df87d161405805bac3
Reviewed-on: https://code.wireshark.org/review/28733
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Construct MainWindow::df_combo_box_ in our initializer list, otherwise
anything that triggers a resizeEvent early on might result in an NPE.
Wait until everything is in place before calling setMinimumWidth.
Bug: 14979
Change-Id: I78b349f9c3ea53d8b1399a77169bbbd0a4a69191
Reviewed-on: https://code.wireshark.org/review/28728
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
That more closely matches the name of the file.h routine that it uses.
Change-Id: Ia206fb8331f4f3ad8035da9f6137ad2428d53a49
Reviewed-on: https://code.wireshark.org/review/28589
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That's needed to support the "proxy icon", so it can be dragged.
Change-Id: I1ad209cd43a2a6df9c52d076f6513780b0ac51be
Reviewed-on: https://code.wireshark.org/review/28587
Reviewed-by: Guy Harris <guy@alum.mit.edu>
It now does the heavy lifting, so MainWindow::setTitlebarForCaptureFile()
doesn't have to duplicate it.
Change-Id: I97ded85306e625b2c67c3fde62a636ec6818a6f5
Reviewed-on: https://code.wireshark.org/review/28586
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Closing a capture file while it is being loaded will result in a crash.
As a workaround, disallow closing the capture file. The requested action
(e.g. MainWindow::openCaptureFile) will be silently ignored.
While at it, protect process_specified_records (called when saving
files) similarly to cf_read and fix a crash that occurs when a capture
from the Capture Dialog is started while a file is being loaded:
file.c:360:cf_close: assertion failed: (cf->state != FILE_READ_IN_PROGRESS)
Bug: 10870 # moving rapidly between large files in a file set
Bug: 13594 # start capture while loading/saving file
Bug: 14351 # open another file while loading file
Change-Id: I6ce8f3163c3fa4869f0299e49909a32594326ce4
Reviewed-on: https://code.wireshark.org/review/28541
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Remove all filter toolbar related stuff into a separate class
and away from MainWindow
Change-Id: I36d937be6c2686b16a8d494213dc740d8d28efcb
Reviewed-on: https://code.wireshark.org/review/28432
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
The Qt UI's main module started out as ui/qt/main.cpp but was moved to
the top-level directory in order to appease Autotools. We don't need to
do that any more, so move it back.
Change-Id: Ic5bc0ed5b754e36cc2b9e682f2ca097781233dfd
Reviewed-on: https://code.wireshark.org/review/28090
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Currently exist two main pages within Wireshark. The first being
the main welcome page and the second the packet capture page. The
first is called "main_welcome.?" and the second is actually the
master_split_ object defined in main_window.h. The first being a
QFrame, the second not.
In preparation for future developments (dockable windows, multiple capture
files), this is being corrected, with the main welcome being renamed
as welcome_page as a first step
Change-Id: I40703e6ed15ff6f6b62b2a3cf31f5636ac6da9ec
Reviewed-on: https://code.wireshark.org/review/27949
Petri-Dish: Roland Knall <rknall@gmail.com>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
master_split_ must be moved to a more prominent widget, as it is in actuality
the main widget of the application.
Change-Id: Id45b60f5f57c982c1890318eec9fa87ab61a9e19
Reviewed-on: https://code.wireshark.org/review/27942
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
When an error occurs while saving packets using the Export Specified
Packets dialog (e.g. try to overwrite the opened capture file), the
dialog is displayed again. As PacketRangeGroupBox freed the packet
selection range, a crash (use-after-free) occurs.
Removes some unnecessary code in MainWindow::exportDissections as well.
Change-Id: I63898427eff7e71799d89c8a22246db8f93a9ff6
Fixes: v2.5.0rc0-968-g38b40acb2d ("Qt: fix a memory leak when exporting packets")
Reviewed-on: https://code.wireshark.org/review/27695
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Set a minimum width for the main window so that we override the minimum
size set by the display filter combo.
Add a couple of comments and fixup a cast while we're here.
Bug: 13516
Change-Id: I6e994a7d06f5a966bb9bf8d3f4c4fc343cd466c8
Reviewed-on: https://code.wireshark.org/review/27697
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Always call toolbar->startCapture() when starting a capture even if
not having a list of interfaces. startCapture() will check for this.
Change-Id: Ifb654f403c72e1d687ae1f6471fc955aa4f6f23c
Ping-Bug: 14631
Reviewed-on: https://code.wireshark.org/review/27306
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Let the Save dialog fixup the extension on accepting the dialog.
Otherwise it is possible that files are silently overwritten without
prompting. Additionally, if a user decides to save a pcapng file as
"foo.pcap", do not try to rename it to "foo.pcap.pcapng".
This change is limited to macOS and Linux because Windows uses a
different file dialog. Tested with both macOS and Linux.
Bug: 14600
Change-Id: Ie0bc1f579766a04f0aad96dcd5daba3fffef9764
Reviewed-on: https://code.wireshark.org/review/27188
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Make the argument to the events a non-memory object
Change-Id: I46d8c24415aa2bc48b2a2d3b1fccffa6956d08b5
Reviewed-on: https://code.wireshark.org/review/26671
Reviewed-by: Roland Knall <rknall@gmail.com>
Roland Knall