The current code generates a shrill noise at least on Windows.
Presumably memccpy does not behave as initially expected :)
Change-Id: Id23a35d1d41ef4044b6a96c093a8fa927828f8b3
Reviewed-on: https://code.wireshark.org/review/12337
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: I7088dfcc0c5873732d972435638f951d5b1921f0
Reviewed-on: https://code.wireshark.org/review/12305
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Changed to only check capture filter once (for each active DLT) when
changing selected interface(s). This optimizes filter checking and
avoids a "No interfaces selected" error when processing unselected
interfaces before selected.
Added a small optimization fetching device_name outside loop.
Bug: 11671
Change-Id: I01ed7a99a2a9ced9a86774a78bec2ba27b4bb97c
Reviewed-on: https://code.wireshark.org/review/12268
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Don't return allocated memory as a const pointer.
Fixes multiple [-Wcast-qual] warnings.
Change-Id: Ie9ceac27fa2a5eba41a5392ac983ff28c3939239
Reviewed-on: https://code.wireshark.org/review/12267
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
When starting a capture do validate all settings before showing
the packet list.
Bug: 11667
Change-Id: Ia0457b9643ca76f8d51c0a254f587398dda888d9
Reviewed-on: https://code.wireshark.org/review/12259
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Noticed this message in stderr, started investigating:
QObject::connect: No such signal MulticastStatisticsDialog::updateFilter(QString&,bool) in ui/qt/multicast_statistics_dialog.cpp:247
QObject::connect: (sender name: 'TapParameterDialog')
QObject::connect: (receiver name: 'TapParameterDialog')
Verified that after this patch, the "Max Burst" changes from "4/100ms"
to "1/1ms" when modifying "Burst measurement interval (ms)" from 100 to
1 using rtp-norm-transfer.pcap from the SampleCaptures wiki.
Change-Id: I803ff9e5a542a5fd3507b086f29628fbf5602784
Reviewed-on: https://code.wireshark.org/review/12228
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Keeping auto scroll is required to update the row displayed.
Instead catch the mouse event and stop auto scroll only during that time.
Change-Id: Ibc5b0a4115192fc3e01e63c82e67761e5aed9d3b
Reviewed-on: https://code.wireshark.org/review/12235
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Autotools only warning.
Change-Id: I30f33d2f8611d662dbc62326862707bf05ad3f60
Reviewed-on: https://code.wireshark.org/review/12150
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Attempting to open the UDP Multicast Streams dialog in the GTK UI
triggers an instant crash (heap-buffer-overflow).
Déjà vu. This is the same problem that plagued the RTP Streams dialog.
This patch is based on the fix in v1.99.3rc0-33-g2c65b33
(mcaststream_dlg_update confused GList vs. mcaststream_tapinfo_t).
After fixing that, the dialog crashed shortly after setting parameters
(heap-use-after-free). That fix is based on v1.99.10rc0-292-gb02a0ee
(after a retap, the old items were still present in the list).
Just that change was not enough as clearing the list still triggered a
signal, possibly because of the "changed" signal (while the RTP player
uses a selection setter function). Apply the patch based on
v1.99.10rc0-270-g01bd832 (disable selection while clearing).
Change-Id: I152bac6f954d8d1c5c20d6c7d56a196c3e20c681
Reviewed-on: https://code.wireshark.org/review/12227
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
QTreeView automatically scrolls so as to show as much as possible the content of the selected column.
Let's get rid of that.
Rename PacketList::setAutoScroll() so that it does not overload QAbstractItemView::setAutoscroll()
Change-Id: I09fb54f9b31c3025efddce6a4e709baaf107702d
Reviewed-on: https://code.wireshark.org/review/12225
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
MSVC compiler does not support properly setting an enum being part of a bit field.
For example the following code:
pinfo->fd->flags.encoding = PACKET_CHAR_ENC_CHAR_EBCDIC;
changes pinfo->fd->flags.encoding from 0x0 to 0xfffffffe instead of 0x1
Let's put back an unsigned int definition (like it is in master-1.12 branch) and add explicit casts where required
Bug: 11787
Change-Id: Idae0140fb6c172f1b3dbf10baefc8cfb00128f4c
Reviewed-on: https://code.wireshark.org/review/12220
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Fixes crash when a capture file is closed while the capture file
properties dialog is open.
Change-Id: Iba35be38e1f53d422ff8428a672703385d477660
Reviewed-on: https://code.wireshark.org/review/12224
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Fixes "cast from 'const char *' to 'char *' drops const qualifier
[-Wcast-qual]", but changes the internal representation of
sid_name_table.
Change-Id: Ia853c3cf3010ea0cd1e2c975a23dd97e15be0fd6
Reviewed-on: https://code.wireshark.org/review/12157
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Hidden columns may have been stored with zero width, so ensure
we always check for this when fetching.
Change-Id: I625c05adccaf2d81198fdeeccf7feeb9a9eb82c2
Reviewed-on: https://code.wireshark.org/review/12196
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
It makes it easier to synchronize the graph and packet list
Change-Id: Ia0c6bc46227c1ff9267622ff52b5a5d966cd6e6a
Reviewed-on: https://code.wireshark.org/review/12195
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: I3152548aa3237dc76e898986120f662cbe56fa38
Reviewed-on: https://code.wireshark.org/review/12188
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: I3c0d116554a663a1a6449d805c9fe860d4c9911e
Reviewed-on: https://code.wireshark.org/review/12190
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Otherwise you need to close the window each time you change the file
so as to browse its content...
Change-Id: Ibf8485695cec34bb950ad98cb671e77d4f663b63
Reviewed-on: https://code.wireshark.org/review/12187
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
QTreeView::setColumnHidden() saves column width on hide and restores
column width on show. When switching from a profile with hidden
columns to a profile where this columns are shown we get a
sectionResized() signal with the saved width from the old profile,
initiated from columnsChanged() -> setColumnVisibility().
We must avoid setting this as a new column width because this is
recent values from a old column layout.
In other cases we use setColumnVisibility() we don’t need to set
a new column width either, because we store the column width ourself.
Don't store column width when hiding column (new_width == 0).
Restore column width when showing column because profiles may have
changed the packet_list layout.
Change-Id: I7e89c3477402ec6d621cd2015ee74b086f60d6cb
Reviewed-on: https://code.wireshark.org/review/12111
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
When changing profile the protocol/dissector preferences may change
so we need to redissect according to new settings.
We should probably have a preferences diff to check if a redissect
is needed, like it is in the preferences dialog.
Bug: 11757
Change-Id: I025bbc7297966986a697f2a6368d9a74e3c1ba72
Reviewed-on: https://code.wireshark.org/review/12156
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Change-Id: Ib21327babc77324313a1b3e2dd6ba0987a8fb333
Reviewed-on: https://code.wireshark.org/review/12144
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
In the Capture Interfaces dialog, the default dialog action was
non-existing. Fix Extcap while at it (searched for "YesRole").
Reported on #wireshark at Freenode.
Change-Id: I7920b806a855acc20dcd2081f6b0d58e993b4ac1
Reviewed-on: https://code.wireshark.org/review/12136
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Valgrind report leaks like these:
6 bytes in 6 blocks are definitely lost in loss record 2,197 of 46,703
at 0x4C2AB80: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0xA5C1610: g_malloc (in /lib/x86_64-linux-gnu/libglib-2.0.so.0.4002.0)
by 0xA5D8B0E: g_strdup (in /lib/x86_64-linux-gnu/libglib-2.0.so.0.4002.0)
by 0x69A211: ManageInterfacesDialog::localAccepted() (manage_interfaces_dialog.cpp:454)
by 0x69A500: ManageInterfacesDialog::on_buttonBox_accepted() (manage_interfaces_dialog.cpp:211)
by 0x71DB32: ManageInterfacesDialog::qt_metacall(QMetaObject::Call, int, void**) (manage_interfaces_dialog.moc.cpp:245)
by 0xBEBE36C: QMetaObject::activate(QObject*, int, int, void**) (in /usr/lib/x86_64-linux-gnu/libQt5Core.so.5.2.1)
by 0xBEBE2A5: QMetaObject::activate(QObject*, int, int, void**) (in /usr/lib/x86_64-linux-gnu/libQt5Core.so.5.2.1)
by 0xAF87E41: QAbstractButton::clicked(bool) (in /usr/lib/x86_64-linux-gnu/libQt5Widgets.so.5.2.1)
by 0xAD11095: ??? (in /usr/lib/x86_64-linux-gnu/libQt5Widgets.so.5.2.1)
by 0xAD11BAD: ??? (in /usr/lib/x86_64-linux-gnu/libQt5Widgets.so.5.2.1)
by 0xAD11D23: QAbstractButton::mouseReleaseEvent(QMouseEvent*) (in /usr/lib/x86_64-linux-gnu/libQt5Widgets.so.5.2.1)
96 bytes in 4 blocks are definitely lost in loss record 42,458 of 52,779
at 0x4C2AB80: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0xA5C1610: g_malloc (in /lib/x86_64-linux-gnu/libglib-2.0.so.0.4002.0)
by 0xA5D722D: g_slice_alloc (in /lib/x86_64-linux-gnu/libglib-2.0.so.0.4002.0)
by 0xA5B84F3: g_list_append (in /lib/x86_64-linux-gnu/libglib-2.0.so.0.4002.0)
by 0x731F9A: hide_interface (iface_lists.c:426)
by 0x69A211: ManageInterfacesDialog::localAccepted() (manage_interfaces_dialog.cpp:454)
by 0x69A4F0: ManageInterfacesDialog::on_buttonBox_accepted() (manage_interfaces_dialog.cpp:211)
by 0x71DB22: ManageInterfacesDialog::qt_metacall(QMetaObject::Call, int, void**) (manage_interfaces_dialog.moc.cpp:245)
by 0xBEBE36C: QMetaObject::activate(QObject*, int, int, void**) (in /usr/lib/x86_64-linux-gnu/libQt5Core.so.5.2.1)
by 0xBEBE2A5: QMetaObject::activate(QObject*, int, int, void**) (in /usr/lib/x86_64-linux-gnu/libQt5Core.so.5.2.1)
by 0xAF87E41: QAbstractButton::clicked(bool) (in /usr/lib/x86_64-linux-gnu/libQt5Widgets.so.5.2.1)
by 0xAD11095: ??? (in /usr/lib/x86_64-linux-gnu/libQt5Widgets.so.5.2.1)
These are caused by leaks inside hide_interface function and among
its users. Fixed by letting hide_interface function free its
resources properly and making sure the users follow the pattern.
Change-Id: I91527b83d36dc38b402d0f4a1db4b7db40fd83f9
Reviewed-on: https://code.wireshark.org/review/12113
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
To preserve the hide/show column settings between switching profiles
the settings have to be saved.
Change-Id: I6f72b2980be149676e1c1099a604c8c6d0d995bf
Reviewed-on: https://code.wireshark.org/review/12109
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Rather than trying to retrieve frame_data from the packet number row (while it could be filtered) let's use pinfo.
Bug: 11596
Change-Id: I53966bfdfbeb0c5918c3524f4b9748ea425fe8a5
Reviewed-on: https://code.wireshark.org/review/12103
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Wrong variable (display field max) is updated when set max recent files
Change-Id: Ie995192ffbf56cbf6bd9cea5b029ab16ff547d2f
Ping-Bug:11748
Reviewed-on: https://code.wireshark.org/review/12046
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reset columns when resolve names column menu item is toggled,
and save preferences to preserve the setting.
We should probably have functions to redraw only one column.
Change-Id: I52dce8d104ab9bedd11edc5d200ab85154243cb5
Reviewed-on: https://code.wireshark.org/review/12077
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
When changing profile without a loaded capture file we have to rebuild
cap_file_->cinfo when a capture is loaded.
Bug: 11493
Change-Id: I9b561a360236056c104cfdb478b855fa550325e2
Reviewed-on: https://code.wireshark.org/review/12068
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Revert some changes in PacketListModel::headerData from c5fb4022
to preserve more optimized code.
Change-Id: If708999a6d446d70eca7414670dec0c618190fe0
Reviewed-on: https://code.wireshark.org/review/12058
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
When closing a capture file the recent files list are updated to put
the most recent opened file on top. Ensure we preserve the selection
of the closed file instead of having the file in the closed file's
previous position selected.
Change-Id: I14c9edde55b88abf7ca7f1828e269ad49203b1db
Reviewed-on: https://code.wireshark.org/review/12018
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
* Don’t add a global profile if having a personal copy.
* Fetch profiles from _current_ profiles list.
* Separate personal and global profiles.
* Use bold and checked for the the current profile.
* Fixed selection of the current profile in the manage profiles dialog.
* Aligned GTK version with Qt version, removed the “New from Global” sub menu.
Change-Id: I2326b39f7d04411000b3c014e3775284392c48c7
Ping-Bug: 11704
Reviewed-on: https://code.wireshark.org/review/12034
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Added get_column_tooltip() to use common code in GTK and Qt.
Change-Id: I2f6ce95e2e129752bbb958a28aec6f42aa81be3d
Reviewed-on: https://code.wireshark.org/review/12047
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
It's an ancient obsolete option with a confusing name.
Change-Id: Ib10330cf859cdea18fed2077c6539e56350ef380
Reviewed-on: https://code.wireshark.org/review/11967
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Also rename and use setDefaultWindowTitle() to set the window title
back to "The Wireshark Network Analyzer".
Change-Id: Ifa87d1a9b9140de4f256effdfca8485f65e2f839
Reviewed-on: https://code.wireshark.org/review/12025
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Do not expand the packet tree in the packet dialog by default, it
results in forgetting the previous collapse state and deviates from
previous GTK+ behavior. It is just annoying to have all Frame, Ethernet,
etc. trees expanded while you are just looking at application layer
traffic.
(The previous tree is restored when calling ProtoTree::fillProtocolTree
which calls proto_tree_draw_node and then invokes setExpanded()).
Bug: 11731
Change-Id: I48c7f28a1777874b1c23025335305493777bca1d
Reviewed-on: https://code.wireshark.org/review/11998
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
On Linux with pulseaudio, the RTP player can crash when an invalid RTP
stream is played. Prevent that by detecting when stream playback fails.
Since the stateChanged signal receiver is registered on the same
thread, it is guaranteed that any outputStateChanged calls happen before
returning from audio_output_->start().
GTK+ not have this issue, its player simply does not show the decoded
stream at all.
Change-Id: I51a91a7f410ef3d46551bc8df0049542efbb806f
Reviewed-on: https://code.wireshark.org/review/11997
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Some vendors use UUID128 as own services/attributes.
Sometimes they use UUID16 for it too. Support both cases.
Change-Id: I001692b94fcc2f86eafa81012790e9134b0f2a36
Reviewed-on: https://code.wireshark.org/review/11976
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Always initialize prefs.col_list in pre_init_prefs.
When switching to a profile without a saved 'preferences' file we
have to initialize prefs.col_list to default values to avoid reusing
settings from the profile we leave.
This was introduced in 5012cf84e6
Emit columnsChanged() before preferencesChanged().
This because columnsChanged() rebuilds cap_file_->cinfo which is used
in preferencesChanged() to align columns (and possible other actions).
Doing this in the wrong order will give an inconsistency and a
heap-buffer-overflow if having different number of columns.
Bug: 11493
Change-Id: I5792dfc0ede11b9457b96f092af8da00453787b1
Reviewed-on: https://code.wireshark.org/review/11971
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Instead of freeing cf->edt before clearing the packet list, add an extra
check to MainWindow::setMenusForSelectedTreeRow. Semi-blind attempt at
fixing bug 11719.
This reverts commit 8c211d51ef.
This reverts commit da71ccbf77.
Bug: 11719
Change-Id: Ifd07be414ffd03a40bdfa7110395c9542bd86fc4
Reviewed-on: https://code.wireshark.org/review/11943
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
We don't show the expert info icon when not having a capture file,
so this should not be enabled when emitting redissectPackets().
Change-Id: I6ae6124ed9f69c214a2beadbdc670b15dfe3d060
Reviewed-on: https://code.wireshark.org/review/11937
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Hide the menu item if built without Lua.
Change-Id: I316cddd55064da590eb4167b495a7fb00a41581f
Reviewed-on: https://code.wireshark.org/review/11931
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
When dragging the UI, this somehow causes a great lag. Then by
spam-clicking on the Stop button, a double free seems to occur.
Fix this by moving the audio cleanup to the outputStateChanged callback
as documented at https://doc.qt.io/qt-5/qaudiooutput.html. Note that
calling stop() in the IdleState also triggers a change event, resulting
in the desired cleanup.
Stop streams before the dialog is closed (via accept/reject). This
*cannot* be done in the destrutor of RtpPlayerDialog because destructing
QAudioOutput processes events from the event queue, resulting in
preature destruction of other objects... crash.
Change-Id: I6bfb33c9396e9bc1ffd346519d22390a97b6bdaf
Reviewed-on: https://code.wireshark.org/review/11894
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Make fillDiagram() a slot and call it after the dialog is visible.
Use the activated() signals instead of currentIndexChanged() for our
comboboxes. The former is only emitted as a result of user interaction
and the latter is always emitted when the value changed. This was a
problem for flowComboBox since initializing its value resulted an extra
call to fillDiagram().
Add a progress frame.
Change-Id: I17bcf5c990363ee758be9e3a0604dde34fc34f2d
Ping-Bug: 11710
Reviewed-on: https://code.wireshark.org/review/11897
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Don't set WA_DeleteOnClose. This keeps the dialog from deleting itself
when we're inside a nested event loop (i.e. when we're reassembling
(TCP) or retapping (UDP or TLS)).
Make sure our beginRetapPackets() and endRetapPackets() calls are
balanced. Move updateWidgets() calls to follow() so that we update on
the first run.
Bug: 11711
Change-Id: Id585be410a315b914b27f1a116d451c863087b00
Reviewed-on: https://code.wireshark.org/review/11892
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Update the logic in ui/qt/main_window.cpp:mergeCaptureFile to match
ui/gtk/capture_file_dlg.c:file_merge_cmd. This ensures that we don't try
to use a stale (and freed) read filter.
Call cf_set_rfcode in both.
Bug: 11718
Change-Id: I6da65e428bff39e907f45992bac7337880c02ce9
Reviewed-on: https://code.wireshark.org/review/11895
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Only enable this menu when there is a packet
Change-Id: I750f2af6e9f565afce83a5e84394cc96b3b071f9
Reviewed-on: https://code.wireshark.org/review/11868
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Moved setMenusForSelectedPacket() to captureFileClosed() because
capture_file_.capFile() is still valid in captureFileClosing().
Menu items depending on is_ip, is_tcp, is_udp, is_sctp, is_ssl,
is_rtp and is_lte_rlc must be disabled when closing the capture
file because many of the dialogs does crash when launched without
a valid frame selected.
All dialogs should probably have a guard for this to avoid crashes,
but that may be an exercise for an enhancement to add support for the
dialogs to follow the current loaded capture file.
Change-Id: If5837a355d08df76547572a25d46ffa539070de3
Reviewed-on: https://code.wireshark.org/review/11883
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
This matches what the Windows file open dialog says, and also should
help prevent people thinking that it's a display filter, so that you can
clear it and see all the packets in the file.
I leave translations to native speakers.
Bug: 11708
Change-Id: I060816357bf7958d516429d09708a7ce16d609c5
Reviewed-on: https://code.wireshark.org/review/11877
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Increment the reference counter each time a flow sequence window is opened.
Free seq_analysis_info_t structure once the last flow sequence / VoIP calls / SIP flow window is closed.
Bug: 11712
Change-Id: I20fcb922b0516417d4bd74cdf75475dcb31f8b90
Reviewed-on: https://code.wireshark.org/review/11851
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
The memory used for profile item data is accessed in updateWidgets() which
is called when setting the Default profile as selected. Ensure we free
this memory after this has happened.
Bug: 11705
Change-Id: I79e12d918289e1fcf25331c39439e9c6f3b774d5
Reviewed-on: https://code.wireshark.org/review/11827
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Add "Go→Next Packet in Conversation" and "Go→Previous Packet in
Conversation" menu items. Make sure the shortucts ("Ctrl+." and
"Ctrl+,") don't get switched to "Cmd+." and "Cmd+," on OS X. "Cmd+," is
already taken by the preferences dialog.
Change-Id: Iab9c7f60fdcf55f12c055b4d0948019bf667ebc9
Reviewed-on: https://code.wireshark.org/review/11771
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Insert new rules at the top. This matches the GTK+ UI behavior. Recolor
the packet list when we press "OK". Add a "to do" item about setting the
filter column width.
Change-Id: I2a9e58fe8642a89f12e1c34622b96613f3ec4c05
Reviewed-on: https://code.wireshark.org/review/11781
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The QLabel::clear() method call does not seem to repaint the area on those platforms.
Let's force an update of the widget.
Bug: 11695
Change-Id: I9c708c8537140b26582e4365ceee3271eac23259
Reviewed-on: https://code.wireshark.org/review/11782
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Use GResource instead, if available. Add autotools and cmake compile time
checks for build requirements (GIO >= 2.32 and GDK-Pixbuf >= 2.26).
Merge all the various static pixbuf csource header files into
a single pixbuf-csource.h header with external linkage through use of the
tools/make-pixbuf-csource.pl script.
Fix inline pixbuf build target for some image paths (broken for GTK
in gb4a4de7).
Add missing 'expert_ok.png' file to distribution (GTK only).
Minor improvements to style/structure of ui/gtk/Makefile.am.
Bug: 10750
Change-Id: I031296b666ee8b92730400dfa6f71f9ee4304863
Reviewed-on: https://code.wireshark.org/review/10992
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Also added save as CSV file.
Do not add double quotes for values as we do in GTK.
Change-Id: I8576a73e10b71cdba0c8c80db8b21927d19528da
Reviewed-on: https://code.wireshark.org/review/11732
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Reviewed-by: Jim Young <jim.young.ws@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
It includes the temporary-file generation, so you don't have to do it
yourself.
Change-Id: I0798df95a5c5646224ec49612f50b423ed78547a
Reviewed-on: https://code.wireshark.org/review/11751
Reviewed-by: Guy Harris <guy@alum.mit.edu>
A call to setText will set the cursor to the end of the box.
As far as I can tell, this call is useless so let's remove it.
Bug: 11689
Change-Id: I40aee48745a9107331a017070a715a075106974a
Reviewed-on: https://code.wireshark.org/review/11727
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
- set field name and occurrence when editing a custom column
- convert occurrence number to a QString
- disable OK button when syntax is incorrect or empty for a custom column
- update syntax state when opening the edit dialog or when switching between custom and normal column
Bug: 11433
Change-Id: Ia8424474dd250c78a0b503e0e9d89c322f4f86a9
Reviewed-on: https://code.wireshark.org/review/11705
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
As noted in main_window.cpp:
// Our event loop becomes nested whenever we call update_progress_dlg, which
// includes several places in file.c. The GTK+ UI stays out of trouble by
// showing a modal progress dialog. We attempt to do the equivalent below by
// disabling parts of the main window. At a minumum the ProgressFrame in the
// main status bar must remain accessible.
Move the freeze+thaw code from captureFileRetapStarted and
captureFileRetapFinished to its own set of member functions. Call them
when we {,un}mark and {,un}ignore packets and note that we should
probably call them elsewhere. Disable mark and ignore actions when we
freeze and restore their states when we thaw.
Bug: 11681
Change-Id: I6f015f7f5f6c98cd48ace2c87f43f48efe51a88b
Reviewed-on: https://code.wireshark.org/review/11690
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
In the main toolbar get our initial icon size using the PM_SmallIconSize
pixel metric. On Windows this varies directly with the system text
magnification setting.
Pinging bug 11675 since we still need to adjust the icon sizes in the
filter edits, progress frame, status bar, and likely other places.
Ping-Bug: 11675
Change-Id: I53a78627ce850bd6dbd4628da481badee63a1208
Reviewed-on: https://code.wireshark.org/review/11605
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Be more consistent about using the ws_ routines, as we suggest in
README.developer.
In C++ on UN*X, define ws_close as ::close rather than close, so that it
works even in classes with methods or members named "close".
Change-Id: Ide2652229e6b6b4624cbddae0e909a4ea1efa591
Reviewed-on: https://code.wireshark.org/review/11637
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Have wsutil/file_util.h include them on UN*X, just as it includes io.h
on Windows, so we can have a rule of "if you do file operations, include
<wsutil/file_util.h> and use the routines in it".
Remove includes of unistd.h, fcntl.h, and sys/stat.h that aren't
necessary (whether because of the addition of them to wsutil/file_util.h
or because they weren't needed in the first place).
Change-Id: Ie241dd74deff284e39a5f690a297dbb6e1dc485f
Reviewed-on: https://code.wireshark.org/review/11619
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Use QDesktopWidget instead of QGuiApplication + QScreen. The former
exists in the Qt 4 API.
Ping-Bug: 11568
Change-Id: Icfbe9f78659b28efbc86061f94d946f70ab6dc41
Reviewed-on: https://code.wireshark.org/review/11604
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Change-Id: I1e4700b505746c49ea518dc401be590740720a57
Reviewed-on: https://code.wireshark.org/review/11600
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This includes wsutil/file_util.h, which includes io.h, so we don't need
to include it ourselves.
Change-Id: I96b111d2b5a4f27895c1e4b19c31eee2a4d5d554
Reviewed-on: https://code.wireshark.org/review/11595
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
We don't have any Flex scanners that support an interactive command-line
interface, so none of our scanners are, or need to be, interactive.
Mark text2pcap's scanner as not interactive.
That means none of our scanners should call isatty(), so they don't have
any need to include <io.h> on Windows; remove that include from the
Lucent/Ascent text capture scanner.
Update a comment to reflect that what matters isn't whether we can read
from a terminal or whether we actually do so, what matters is whether
they read *interactively* from a terminal (if you want to run text2pcap
reading from the standard input and type at it, be my guest).
Change-Id: I59979d1fdb37e1913125a400963ff7a3fa6b9bbd
Reviewed-on: https://code.wireshark.org/review/11587
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
On Windows (and probably X11) it's possible to set an offscreen window
geometry. Add a rect_on_screen function to qt_ui_utils and use it as a
sanity check in MainWindow::loadWindowGeometry.
If this doesn't work well (e.g. if we end up with dueling Qt and GTK+
geometries) we might want to create separate Qt and GTK+ preferences.
Bug: 11568
Change-Id: Icde1181671770356e87f07d584894ec3148e1bd2
Reviewed-on: https://code.wireshark.org/review/11584
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>