Singletons moved from main_window to each class's static open<NameOfClass>
method:
- RtpPlayerDialog
- RtpStreamDialog
- VoipCallsDialog
- RtpAnalysisDialog
Fixed issue with selecting RTP stream in sequence dialog. When user
selected a stream and moved mouse to Rtp Player button and pressed it,
incorrect RTP stream was sent to it.
When button is pressed or triggered by shortcut, it opens same
window as before.
User can click small arrow next to button and it open menu with all
new actions e.g. Set/Add/Remove for RTP Player.
Documentation updated.
When user press S(elect)/D(eselect) key, all RTP streams related to
selected call/calls are selected/deselected in RTP Streams window. If
window is not shown, it is opened.
Documentation updated.
Changes:
- RTP Player added to Telephony/RTP menu.
- When openning RTP Analysis or RTP Player from RTP menu, just selected
stream is added. When Ctrl is hold during opening, reverse stream is
searched and added too.
- RTP Player: Added tool to select/deselect all inaudible streams
- RTP Player: Added Prepare Filter button
- RTP Player: Added Analyze button
- RTP Analysis: Added Prepare Filter button
- documentation updated
Code changes:
- RTP Player::rescanPacket() is not fired multiple times during rate change and during dialog creation
- Error shown in RTP player is cleared after every new decode of streams
- RTP Player handles case when Qt do not emit stop stream event
- "Select" menu code unified between dialogs>
- RTP Player: Audio routing menu unified
- buttons are connected to actions by signals()
- Analyze dialog is called by list of rtpstream_id, not rtpstream_info
Changes:
- refactored main_dialog handling of telephony dialogs
- RTP Player dialog is nonmodal now and can be left open
- it is possible to issue three actions on RTP Player dialog from other
dialogs (other dialog have selected set of RTP streams before action)
- replace - removes existing streams from RTP dialog and shows new set
- add - adds new set to existing list in RTP dialog
- remove - remove streams in set from list in RTP dialog
- Sequence Dialog:
- was modified to hold rtpstream_info_t for RTP streams
- added Play button
- VoIP features (RTP Play button, select/deselect RTP stream) are
disabled after creation and must be enabled. It handles that RTP
Play button is not shown e.g. in TCP sequence show
Dialogs has same order of buttons:
- dialog specific (Flow Sequence, Find Reverse, Analyze, Reset Diagram)
- common voice functions (Prepare Filter, Play Streams)
- exports (Copy, Export)
- Close of dialog
Names were unified:
- Copy really copying to clipboard
- Save/Export was unified to Export
Remove the editor modeline blocks from most of the source files in ui/qt
by running
perl -i -p0e 's{ \n+ /[ *\n]+ editor \s+ modelines .* shiftwidth= .* \*/ \s+ } {\n}gsix' $( ag -g '\.(cpp|h)' )
then cleaning up the remaining files by hand.
This *shouldn't* affect anyone since
- All of the source files in ui/qt use 4 space indentation, which
matches the default in our top-level .editorconfig
- The one notable editor that's likely to be used on these files and
*doesn't* support EditorConfig (Qt Creator) defaults to 4 space
indentation.
The patch reintroduces WiresharkDialog::captureFileClosed() method and
calls captureFileClosing() and captureFileClosed() in right order.
Both methods call updateWidgets() at its end.
All dialogs were reviewed and captureFileClosing/Closed methods updated
when appropriate.
captureEvent() method in multiple dialogs changed to captureFileClosing/Closed
as it does same actions - looks like old style of detecting of capture
file closing.
VoIP Calls dialog and RTP Streams dialog has now option to apply display
filter dialog during processing packets.
Filter checkbox is activated during dialog open when display filter is active.
New field apply_display_filter had to be added to voip_calls_tapinfo_t and
_rtpstream_tapinfo/rtpstream_tapinfo_t structures.
!1257 solved issue with duplication of information, but removed all
calls from VoIP Calls dialog. This patch solves the issue.
It was tested with many samples and provides same output as 3.4 branch.
The fix solves issue #16952. It reverts commit 88813716 which introduced memory leak which causes the issue. The original issue with duplicating entries is solved too.
Because commit was cherry picked to 3.4.0 (might be in more branches), this patch should be cherry picked too.
The fix solves issue #16952. It reverts commit 88813716 which introduced memory leak which causes the issue. The original issue with duplicating entries is solved too.
Because commit was cherry picked to 3.4.0 (might be in more branches), this patch should be cherry picked too.
Every press of Play Stream or Prepare Filter caused incorrect increasing
of Packets count and added Comments.
The reason was that callinfo statistics were not clear before recap
therefore all new values were added to exiting ones.
Patch solves it.
Fix the following deprecation issues for Qt 5.15:
Use Qt::WindowFlags() instead of 0 in Qt >= 5.6.
Pass Qt::SkipEmptyParts instead of QString::SkipEmptyParts to QString::split() in Qt >= 5.15.
Use QMultiMap instead of QMap where we were using QMap::uniqeKeys().
Use QCP::Interactions() instead of 0.
Use '\n' instead of QTextStream::endl.
Use QWheelEvent::angleDelta() instead of QWheelEvent::angle().
Change-Id: Ie2d69d3a396c0821c2c34f506ddad6f8e22f7049
Reviewed-on: https://code.wireshark.org/review/37334
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Patch adds ability to set start of audio play by double clicking on waveform.
Patch fixes unreported issue with placing waveform at incorrect place when switched relative/absolute time mode (check/uncheck Time of Day).
Change-Id: Ib8ce24aea870e2443e033afbb6d6e9fbcf222431
Reviewed-on: https://code.wireshark.org/review/35621
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
When voip_calls_dialog is opened and then closed, mentioned warning is shown
because voip_calls_remove_all_tap_listeners is called twice in two different
methods. Removing of the call from one of method is not possible therefore
I introduced variable which tracks whether voip_calls_remove_all_tap_listeners
was already called or not.
Change-Id: Ic3c206cb7baf6612958d383880af296af019ffd8
Reviewed-on: https://code.wireshark.org/review/35660
Petri-Dish: Jim Young <jim.young.ws@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Jim Young <jim.young.ws@gmail.com>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Remove randomly used space inside parentheses to make the coding
style uniform. Add space after if, for and while.
Change-Id: I519f5994b6f73d8a57a5004d51ca460276c618fe
Reviewed-on: https://code.wireshark.org/review/35112
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
Speed up the filtering, by only taking rows once
Change-Id: I6123b2974fd58480463e4a0bd02524f6b5c0a353
Reviewed-on: https://code.wireshark.org/review/34879
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
Favor asynchronous show() as it does not create new event loop.
Change-Id: I01982806f87705f04138f15ae8eb084f1d4f9b2c
Reviewed-on: https://code.wireshark.org/review/34677
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Using a simple (type *) cast on g_list_next results in a warning
with modern compilers "old-style cast"
Adding a warning for g_list_next and data access to avoid the warning
A good overview why reinterpret_cast has been used can be found here:
https://stackoverflow.com/questions/332030/when-should-static-cast-dynamic-cast-const-cast-and-reinterpret-cast-be-used
It is a 1:1 replacement in this case, but does not use any of the new
cast styles and therefore should be used with caution.
Change-Id: I989f237afc39aaf40133a788b1c0bbd7a51bf974
Reviewed-on: https://code.wireshark.org/review/34284
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
Rework the context menu to have same functions behave the same
way and just create the menu while it is needed. Also, add switch
for setting the time of day to the context menu
Change-Id: Id813ff39431f6fad15887856f246d03f209e438d
Reviewed-on: https://code.wireshark.org/review/34165
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
This allows taps that can fail to report an error and fail; a failed
tap's packet routine won't be called again, so they don't have to keep
track of whether they've failed themselves.
We make the return value from the packet routine an enum.
Don't have a separate type for the per-packet routine for "follow" taps;
they're expected to act like tap packet routines, so just use the type
for tap packet routines.
One tap packet routine returned -1; that's not a valid return value, and
wasn't one before this change (the return value was a boolean), so
presume the intent was "don't redraw".
Another tap routine's early return, without doing any work, returned
TRUE; this is presumably an error (no work done, no need to redraw), so
presumably it should be "don't redraw".
Clean up some white space while we're at it.
Change-Id: Ia7d2b717b2cace4b13c2b886e699aa4d79cc82c8
Reviewed-on: https://code.wireshark.org/review/31283
Reviewed-by: Guy Harris <guy@alum.mit.edu>
*rtp_stream* -> rtpstream to follow common name
Change-Id: I381bc1cdb8206c5cfe67e94dd7fb1a5cb25f9c16
Reviewed-on: https://code.wireshark.org/review/28394
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Changes:
- rtpstream_packet renamed to rtpstream_packet_cb to follow *_cb pattern
- variables/types used in iax2_analysis_dialog were created as copy of *rtp* ones, but names were left as *rtp* -> *iax2*
- struct _rtp_stream_info replaced with rtp_stream_info_t
- there was tap-rtp-analysis.h, but no tap-rtp-analysis.c - related content was moved from tap-rtp-common.c
- *rtp_stream* functions renamed to *rtpstream*
- renamed rtp_stream_info_t to rtpstream_info_t to follow *rtpstream* pattern.
- renamed ui/rtp_stream.c rtpstream_draw -> rtpstream_draw_cb
Change-Id: Ib11ff5367cc464ea1b0c73432bc50b0eb9cd203e
Reviewed-on: https://code.wireshark.org/review/28299
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Make sure that the filter for VoIP calls includes RTP streams when calling
Prepare filter.
Bug: 13440
Change-Id: Ia55073151817b88b3fa6a3fd30f98fdf683621a4
Reviewed-on: https://code.wireshark.org/review/27955
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Move */ to a separate line below the SPDX identifier.
Change-Id: Id1032215449cfccae0933147b45e04b65e0b727f
Reviewed-on: https://code.wireshark.org/review/27211
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The first is deprecated, as per https://spdx.org/licenses/.
Change-Id: I8e21e1d32d09b8b94b93a2dc9fbdde5ffeba6bed
Reviewed-on: https://code.wireshark.org/review/25661
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
voip's special tap unregistering should be happening when
WiresharkDialog unregisters its taps.
Change-Id: I8f28b1ed31617b47870cb7a429d43f52fb8c4a86
Reviewed-on: https://code.wireshark.org/review/25294
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The split isn't necessary now that epan no longer uses the capture_file
structure.
Change-Id: Ia232712a2fb5db511865805518e8d03509b2167f
Reviewed-on: https://code.wireshark.org/review/24693
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Have cfile-int.h declare the structure, and use it in files that
directly access the structure.
Have cfile.h just incompletely declare the structure and include it
rather than explicitly declaring it in source files or other header
files.
Never directly refer to struct _capture_file except when typedeffing
capture_file.
Add #includes as necessary, now that cfile.h doesn't drag in a ton of
Change-Id: I7931c8039d75ff7c980b0f2a6e221f20e602a556
Reviewed-on: https://code.wireshark.org/review/24686
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Calling QPushButton.setMenu and QMenu.addMenu does not transfer ownership
of the menu. Fix some leaks by letting "receiving" object act parent
for the menu object.
Bug: 14071
Change-Id: Id4edaf895503ef5dd4597eac99c2cdd6ad09b2ff
Reviewed-on: https://code.wireshark.org/review/23600
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Create registration system to allow creation of analysis items
to be localized to the dissector. For now only frame (all) and
TCP are supported.
VOIP functionality will be covered in a separate patch.
Change-Id: I5b05ef6d5afff8d0b162b03a0f451ab810602e81
Reviewed-on: https://code.wireshark.org/review/23571
Reviewed-by: Michael Mann <mmann78@netscape.net>
Following the move for widgets and utils directory, moving models
and delegates to the utils directory. Guidelines for this directory are:
- Implementation of a model
- Implementation of a delegate
- Utility class for data storage used by a model
Note: additionally all includes affected by this move have been changed
to absolute path includes, instead of relative ones.
Change-Id: I3bb868af7d3570437682b722a0cd46c906628570
Reviewed-on: https://code.wireshark.org/review/22790
Reviewed-by: Roland Knall <rknall@gmail.com>
Following the move for widgets directory, moving utils
to the utils directory. Guidelines for this directory are:
- Generic use but not a widget
- Utility functionality used by many classes
Note: additionally all includes affected by this move have been changed
to absolute path includes, instead of relative ones.
Change-Id: I019ae4b6e6f6d06a5745a63ed195edbd36fb936b
Reviewed-on: https://code.wireshark.org/review/22602
Petri-Dish: Roland Knall <rknall@gmail.com>
Reviewed-by: Roland Knall <rknall@gmail.com>
When a capture file is reloaded, the information stored in
VoipCallsInfoModel is invalidated. Add another cache layer to fix this:
VoipCallsInfoModel wraps around raw data (invalid on close)
CacheProxyModel NEW: use prev. data or cache on close
VoipCallsInfoSortedModel provided sorting, etc.
VoipCallsDialog actual user of model (callTreeView)
This also fixes a UAF after a file was closed, and when a call is
selected (that got worse with the last model/view patch and is "fixed"
in this patch with the caching layer. Note that the Flow sequence and
Play Streams dialog are not that useful when the file is closed).
Change-Id: Ib4daff9dc01a54863fe1d943bdbdb876418924ee
Reviewed-on: https://code.wireshark.org/review/20574
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Functional improvements:
- "Time of day" option is now propagated to the CSV/YAML export.
- The sorting order is preserved in the CSV/YAML export.
Other changes:
- Convert column name identifiers to enum.
- CSV output will now always be quoted (previously numbers like packet
count were not quoted, but since CSV has no numeric type it should
be OK to add quotes). Side-effect of model design decision.
- Instead of clearing the widgets and re-adding all calls, now it will
add new calls to the model. Not tested with a live capture, if the
column data can change, maybe a dataChanged signal is needed.
Due to this patch, it should be easier to add a filter for finding calls
easier (e.g. by From, IP, etc.).
Note: extra QList is used in the model to ensure a O(1) lookup of calls
(rather than O(n) for GQueue).
Change-Id: Ie08462aae038d9c3daf1cc7a152b948724689017
Reviewed-on: https://code.wireshark.org/review/20084
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Remove unnecessary Q_DECLARE_METATYPE macros and replace calls
to QVariant conversions with VariantPointer where necessary
Change-Id: Ia4690590095f930bf94644197de7fa30b00ee7ec
Reviewed-on: https://code.wireshark.org/review/19611
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Move the NULL check before the assignment with the dereference.
Change-Id: Ifcd4fb89c059ad2f4b6606fc1e83dc67a7d7373d
Reviewed-on: https://code.wireshark.org/review/19605
Reviewed-by: Michael Mann <mmann78@netscape.net>
After opening the Call Flows dialog from the Voip Calls dialog, followed
by closing the Voip Calls dialog, the Go To Packet functionality in the
Call Flows dialog is broken. That happens because the signal is not
proxied anymore.
Just remove all these indirections via signals and directly update the
selected packet.
Change-Id: I9c6d519dbe800e4dfdf0407d832f17819b344e46
Reviewed-on: https://code.wireshark.org/review/18933
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
1) Added checkbox to toggle format in start and stop time columns from
relative time to time of day.
2) Added column to show duration of call in between the protocol and
packets column.
Change-Id: I56347fa36885e3a71646e2c9cdde2b8b5fb88846
Reviewed-on: https://code.wireshark.org/review/18383
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Jirka Novak