Harald requested that the OBS scripts should not stop if building one
specific source package fails, instead it should keep going and report
at the end a non-success exit code.
Given that the shell script code has historically grown and became hard
to maintain, I decided to rewrite the scripts for implementing this
feature. This rewrite solves additional problems:
* No full checkout of an OBS project like network:osmocom:latest
anymore, with lots of packages that won't get updated (e.g. the uhd
package has a uhd-images_3.14.1.1.tar.xz file that is 108 MB). With
the old code, developers had to wait minutes during the checkout
before the script reaches code that is currently being developed. Now
only single packages get checked out right before they get updated.
* No need to clone git repositories over and over. With the new code,
git repos only get cloned if needed (for latest it is not needed if
the remote git tag is the same as the version in OBS). During
development, the cloned git repositories are cached.
* Output from commands like "git tag -l" is not written to the log
unless they failed. This makes the log more readable, which is
especially important when a package fails to build, we keep going and
need to spot the build error in the middle of the log later on.
* No more duplicated code for nightly and latest scripts that worked
similar but had slight differences. Also the list of packages is not
duplicated for nightly and latest anymore; nightly uses all packages
and latest uses packages that have at least one git tag.
* Building source packages is decoupled from uploading them. A separate
script build_srcpkg.py can be used to just build the deb + rpm spec
source packages, without interacting with the OBS server.
* The scripts can optionally run in docker with a command-line switch,
and this is used by jenkins. This way we don't need to install
more dependencies on the host such as rebar3 which is now needed for
erlang/osmo_dia2gsup.
* Add erlang/osmo_dia2gsup and run its generate_build_dep.sh (SYS#6006)
I have done the new implementation in python to make use of argparse
and to be able to use try/except and print a trace when building one
package fails.
Example output:
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly_obs.osmocom.org/48/console
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_obs.osmocom.org/46/console
Change-Id: I45a555d05a9da808c0fe0145aae665f583cb80d9
Fix the pattern that gets the source tarball with ls in order to update
the "Source:" line in the spec file. The previous assumption was that it
would always match:
ls -1 "${name}_"*".tar."*
But this isn't the case anymore since a spec file was added to
libosmo-dsp where the package name ($name) is libosmo-dsp, but the
tarball doesn't have the minus character:
libosmodsp_0.4.0.1.d7d9.202207150002.tar.xz
Therefore just change the pattern to:
ls -1 *_*.tar.*
We can do this because there is always only one tarball in the directory
and we wouldn't use ".tar." in a package name.
Fixes: OS#5619
Change-Id: Ic704f480102ab6f90f3936a3be30e3020402e750
Make the variable available, as it's needed by the scripts that
osmocom-packages-docker.sh calls since
Ib271e16e93ebc58ed1ecb0ea881e1f1370e40928.
Change-Id: I8e53523b9b1ceafa45fe7b3dca2731d4e1c74959
Build debian-bullseye-erlang on x86_64 nodes only, as the image doesn't
get used on nodes with other arches. The image is only used by
gerrit-verifications jobs for osmo_dia2gsum and osmo_gsup, which are
restriected to run on these nodes:
https://jenkins.osmocom.org/jenkins/label/osmocom-gerrit-debian9/
Remove the check and comments for not building for debian 10 x32, as
that node has been replaced with a debian 11 one.
Related: OS#5453
Change-Id: I5636dfc9e06a44b096f9dc55528d677ea2dfc352
osmo-python-tests was added to latest just like it was in nightly, by
adding the following two lines to build_osmocom():
checkout python/osmo-python-tests
...
build osmo-python-tests
But the build fails, because the "checkout" function clones into a
"python/osmo-python-tests" directory in latest, and not into a
"osmo-python-tests" directory like in nightly. Make it behave the same
by adjusting the "checkout" function in nightly.
(This code has historically grown and should be refactored imho, but
let's fix this bug first.)
Fix for:
====> Building osmo-python-tests
+ cd /home/osmocom-build/jenkins/workspace/Osmocom_OBS_latest_obs.osmocom.org/osmo-python-tests
./scripts/osmocom-latest-packages.sh: 99: cd: can't cd to .../osmo-python-tests
Change-Id: I97074ee953cadac476fe2e4b686689c26bac1ea1
Move the long shell command into a jenkins.sh in docker-playground, and
move the osmocom-release-tarballs.sh script there as well. This makes it
easier to test the script, and only patching one repository is needed
from now on when changing to a newer debian version.
Depends: docker-playground I4cf66097f508c029f688ec8af1cab2238d42f84f
Change-Id: I15f6c08b807f1462f91e95b624cdc1aad0592dd6
Currently there is only one jenkins node labeled as
osmo-gsm-tester-build. Build the osmo-gsm-tester container only there,
not on all x86_64 nodes.
The /var/tmp/osmo-gsm-tester/state directory is set up by
ansible/roles/gsm-tester/tasks/main.yml.
Related: https://jenkins.osmocom.org/jenkins/label/osmo-gsm-tester-build/
Change-Id: I9191d6d54d516ce75f3f576f34463dcaad22c85a
Split the OBS related jenkins jobs into two, one that uploads to the
new obs.osmocom.org and one that uploads to build.opensuse.org.
Set an alias for "osc" that sets the right server, and set the
expand_aliases shopt so the bash scripts that source common-obs.sh will
not ignore the alias.
Related: OS#5557
Change-Id: Ib271e16e93ebc58ed1ecb0ea881e1f1370e40928
The public OBS key expired on 2022-05-22 and was replaced with a key
that was only shortly valid until 2022-06-08. Shortly after it was
replaced with a key that is valid longer, until 2024-08-02.
On 2022-06-09, one of the osmocom-repo-install tests started failing.
For some reason, the key in the latest/Debian_10 directory was not
updated to the latest one:
https://download.opensuse.org/repositories/network:/osmocom:/latest/Debian_10/Release.key
Since the key is the same for all of network:osmocom, adjust the
function to download it from a place that the OBS web UI links to when
attempting to download the public GPG key.
I guess the latest/Debian_10/Release.key will get updated once making a
new release and updating the packages in the repository. But sinc
there's a lot of other tasks to do, just use this practical solution for
now.
Change-Id: Idd0fb6e07cba959a36269244b0c7b5c62aaffeee
Don't attempt to build debian-bullseye (11) in docker on debian 10 x86,
as it results in:
GPG error: http://security.debian.org/debian-security bullseye-security InRelease: At least one invalid signature was encountered.
E: The repository 'http://security.debian.org/debian-security bullseye-security InRelease' is not signed.
This is a temporary measure until we've upgraded the only jenkins node
that runs debian 10 on x86, gtp0-deb10build32.
Related: OS#5453
Change-Id: Iba7679c027ca89a29393c220d01b195cfce4fec3
For a long time I was using '{}' to indicate a nulled out struct. But
apparently '{0}' is the favored way to write that. Let's allow using
this notation to terminate a value_string[].
Change-Id: Id2f5ba897ec83f34f8d3c4425353c0baf309bb6d
Let's use newer debian to avoid problems with older erlang. Furthermore,
the new image builds rebar3 to avoid issues with unmatching erlang
versions.
Change-Id: I7b1956c515daccf6ab1ff87031c6fec649cadb4b
Only run the simple image clean code if docuum is not running. It works
well enough in most cases, but has the drawbacks that it never deletes
"latest" images or images not matching "^osmocom-build", and may delete
images that are still being used (OS#5447). With the other tool, all
images are considered for removal, and the ones that have not been used
the longest time are removed first.
Related: OS#5477, OS#5066, SYS#5827
Change-Id: I1cef0833c096de0fa5acf77156bb5dd362e2ef9c
Do not only clean up dangling images, but also containers, volumes and
networks.
Related: SYS#5827
Change-Id: If441b251de50063f0229d36fb1bc260a4cb1dd87
Clone simtrace2.git before trying to create the tarball with git.
Fix for:
simtrace2
simtrace2-0.1.tar.bz2 (creating)
+ cd /osmo-ci/_temp/repos/simtrace2
/osmo-ci/scripts/osmocom-release-tarballs.sh: 195: cd: can't cd to /osmo-ci/_temp/repos/simtrace2
Related: OS#5347
Fixes: 0221a0 ("OSMO_RELEASE_REPOS: add simtrace2, osmo-remsim")
Change-Id: I0a845549ba1fe9f0d9ab55a5c5c7bf5b8f57caae
Adjust to simtrace2's directory structure, which does not have a
configure.ac in the main directory like all other repositories. The main
directory has a regular Makefile without autotools, only the host dir
has a configure.ac file (and only in newer versions). Deal with this by
creating two tarballs, one with "git archive" for the whole directory,
and one for the host dir only with the usual "autoreconf -fi;
./configure; make dist-bzip2". The latter one has the files created by
autoreconf ("configure" script and others).
simtrace2
├── simtrace2-0.1.tar.bz2
├── simtrace2-0.2.tar.bz2
├── simtrace2-0.3.tar.bz2
├── simtrace2-0.4.tar.bz2
├── simtrace2-0.5.1.tar.bz2
├── simtrace2-0.5.tar.bz2
├── simtrace2-0.6.1.tar.bz2
├── simtrace2-0.6.tar.bz2
├── simtrace2-0.7.0.tar.bz2
├── simtrace2-0.7.1.tar.bz2
├── simtrace2-0.8.0.tar.bz2
├── simtrace2-0.8.1.tar.bz2
├── simtrace2-host-0.6.1.tar.bz2
├── simtrace2-host-0.6.tar.bz2
├── simtrace2-host-0.7.0.tar.bz2
├── simtrace2-host-0.7.1.tar.bz2
├── simtrace2-host-0.8.0.tar.bz2
└── simtrace2-host-0.8.1.tar.bz2
Closes: OS#5347
Change-Id: Ib52a23a2a7d6ea64bfa539b1d026f035fdb3af57
Old osmo-msc releases failed to build because logging output of
libosmo-mgcp-client has changed. I'm backporting the fix as 1.7.1 and
1.6.4. The script builds the last 3 releases (1.6.4, 1.7.0, 1.7.1), so
mark 1.7.0 as known error.
Related: osmo-msc Id197e4ab9ba12e284299ef520edee9c362513bf1
Change-Id: I86f8252d450165f4be3d7c97fa70235638f7dd96
Drop these workarounds, as we are not building binary packages for
debian 8 anymore.
Related: OS#5223
Change-Id: Ibe7ba124557969df62798ba49c4489e9606c2341
Disable osmo-pcap-server for latest again, as the port is still
conflicting there with osmo-bts.
Fixes: 7ca9c4 ("repo-install-test: clear SERVICES_NIGHTLY list")
Related: OS#5203
Change-Id: I711e0e13c3e3af30407b85fd10aca9446f2b94ba
All services that start up in nightly should also start in the latest
release now, as new versions have been released of related programs.
Change-Id: Idc94270978ec5ca67d6f7e20e009f905e972f984
Use the nightly script instead of latest, so all packages get
upgraded when upgrading osmocom-2021q1.
Related: SYS#5370
Change-Id: If8de585652997aae1edb586c948c181f564f6994
Determine the package name of the conflict package itself and all
conflicting packages automatically, so we don't need to have it
duplicated in the OBS latest and OBS nightly scripts.
This is in preparation to move osmocom-2021q1 from latest to nightly.
With the current logic in nightly for the conflict package, it would not
be possible.
Related: SYS#5370
Change-Id: I183b9040250e66e0d7d17ef4b95af9e7d4a26f04
Allow overriding OSMO_OBS_CONFLICT_PKGVER, so we can increase the
version of the osmocom-2021q1 package whenever something changes on one
of the 2021q1 branches.
Related: SYS#5370
Change-Id: Iae45d7462aab8227ed3756e6cccfa3e64cb04211
Add a simple helper script to run osmocom-*-packages.sh in docker to
avoid installing dependencies on the host system.
Related: SYS#5370
Depends: docker-playground Ibb55ad18d2ccf4313f52fa3e3c10d4420c84dced
Change-Id: Icc89e20950c2aaa67b209340d1d797b76fce32d2
Move get_commit_version to common-obs.sh and call it in
osmocom-latest-packages.sh, if the feed is not "latest". This way, the
packages don't have the latest tag as version anymore, and the version
changes if commits get pushed to the feed's branch.
Related: SYS#5370
Change-Id: I4a4fa3b8f66652ef36a7fe62047a88a69c473f19
Oliver Smith
Neels Hofmeyr
Pau Espin
Vadim Yanitskiy
Harald Welte